3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => q{Address set to: $_[0]},
14 agwe => q{AGW Engine enabled},
15 agwu => q{AGW Engine disabled},
16 already => q{$_[0] already connected},
17 anns => q{Announces enabled for $_[0]},
18 annu => q{Announces disabled for $_[0]},
19 annts => q{AnnTalk enabled for $_[0]},
20 anntu => q{AnnTalk disabled for $_[0]},
22 badnode1 => q{$_[0] is now a bad node},
23 badnode2 => q{$_[0] is now a good node},
24 badnode3 => q{List of Bad Nodes:-},
25 bbse1 => q{Please enter your BBS address,, set/bbs <your bbs address>},
26 bbs => q{Your BBS Address is now "$_[0]"},
27 beepoff => q{Beeps are now off},
28 beepon => q{Beeps are now on},
29 believes => q{Believe node $_[0] via $_[1]},
30 believeu => q{Don't believe node $_[0] via $_[1]'},
31 buddya => q{$_[0] has been added to your buddies},
32 buddyu => q{$_[0] has been removed from your buddies},
33 call1 => q{Callsign lookup via $_[0]:},
34 chatend => q{Finished chatting on $_[0]},
35 chatinst => q{Entering Chatmode on $_[0], /EX to end, /<cmd> to run a command},
36 chatprompt => q{Chat ($_[0])>},
37 chattoomany => q{Not allowed, already in $_[1], use /chat $_[0]},
38 cluster => q{Nodes: $_[0]/$_[1] Users [Loc/Clr]: $_[2]/$_[3] Max: $_[4]/$_[5] - Uptime: $_[6]},
39 conother => q{Sorry $_[0] you are connected to me on another port},
40 concluster => q{Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])},
41 contomany => q{Sorry $_[0] but you are already connected to $_[1] other nodes (on $_[2])},
42 conscript => q{no connect script called "$_[0]" found in $main::root/connect},
43 confail => q{connection to $_[0] failed ($_[1])},
44 constart => q{connection to $_[0] started},
45 conbump => q{Reconnected as $_[0] at $_[1], this instance is disconnected},
46 creuser => q{User $_[0] has been created},
47 deluser => q{User $_[0] has been deleted},
48 db1 => q{This database is hosted at $_[0]},
49 db2 => q{Sorry, but key: $_[0] was not found in $_[1]},
50 db3 => q{Sorry, database $_[0] doesn't exist here},
51 db4 => q{Sorry, database $_[0] located at $_[1] isn't currently online},
52 db5 => q{Accessing remote database on $_[0]...standby...},
53 db6 => q{Database $_[0] already exists, delete it first},
54 db7 => q{Database $_[0] created for remote node $_[1]},
55 db8 => q{Database $_[0] created locally},
56 db9 => q{Database $_[0] removed},
57 db10 => q{$_[0] records imported from $_[1] to $_[2]},
58 db11 => q{Sending your request(s) to $_[0], please stand by...},
59 db12 => q{DB Name Location Cmd Chain},
60 db13 => q{$_[0] records exported from $_[1] to $_[2]},
61 dfreq1 => q{Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw'},
62 dir1 => q{No messages found},
63 disc1 => q{Disconnected by $_[0]},
64 disc2 => q{Channel $_[0] disconnected},
65 disc3 => q{No Channel, but connection $_[0] disconnected},
66 disc4 => q{No Channel or connection but orphan $_[0] disconnected},
68 dup => q{Sorry, this is a duplicate},
69 dx1 => q{Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments},
70 dx2 => q{Need a callsign; usage: DX [BY call] freq call comments},
71 dx3 => q{The callsign or frequency is invalid},
72 dx4 => q{The ip address ($_[0]) is invalid},
73 dxcqs => q{DX CQ Zones enabled for $_[0]},
74 dxcqu => q{DX CQ Zones disabled for $_[0]},
75 dxitus => q{DX ITU Zones enabled for $_[0]},
76 dxituu => q{DX ITU Zones disabled for $_[0]},
77 dxs => q{DX Spots enabled for $_[0]},
78 dxu => q{DX Spots disabled for $_[0]},
79 e1 => q{Invalid command},
80 e2 => q{Error: $_[0]},
81 e3 => q{$_[0]: $_[1] not found},
82 e4 => q{Need at least a prefix or callsign},
84 e6 => q{*** No station specified ***},
85 e7 => q{callsign $_[0] not visible on the cluster},
86 e8 => q{Need a callsign and some text},
87 e9 => q{Need at least some text},
88 e10 => q{$_[0] not connected locally},
89 e11 => q{Can't use $_[0] as target},
90 e12 => q{Need a node callsign},
91 e13 => q{$_[0] is not a node},
92 e14 => q{First argument must be numeric and > 0},
93 e15 => q{invalid qualifier "$_[0]"},
94 e16 => q{File "$_[0]" exists},
95 e17 => q{Please don't use the words: @_ on here},
96 e18 => q{Cannot connect to $_[0] ($!)},
97 e19 => q{Invalid character(s) in line $_[0]},
98 e20 => q{token '$_[0]' not recognised},
99 e21 => q{$_[0] is not numeric},
100 e22 => q{$_[0] is not a callsign},
101 e23 => q{$_[0] is not a range (eg 0/30000)},
102 e24 => q{Sorry, Internet access is not enabled},
103 e25 => q{Sorry the value must be between $_[0] and $_[1]},
104 e26 => q{Too many concurrent errors, you are being disconnected},
105 e27 => q{$_[0] not a numeric or a callsign prefix'},
106 e28 => q{Sorry, you need to be registered (SP $main::myalias to register)},
107 e29 => q{Need a password},
108 e30 => q{Cannot Open $_[0] $!},
109 e31 => q{$_[0] is not a user'},
110 e32 => q{Need a passphrase},
111 e33 => q{$_[0] is not a number of days or a valid date},
112 e34 => q{Need a GROUP and some text},
113 e35 => q{You are not a member of $_[0], join $_[0]},
114 e36 => q{You can only do this in normal user prompt state},
115 e37 => q{Need at least a callsign},
116 e38 => q{This is not a valid regex},
117 e39 => q{Sorry $_[0] is not a valid argument},
119 echoon => q{Echoing enabled},
120 echooff => q{Echoing disabled},
121 echow => q{*Echoing is currently disabled, set/echo to enable},
122 emaile1 => q{Please enter your email address, set/email <your e-mail address>},
123 emaila => q{Your E-Mail Address is now "$_[0]"},
124 email => q{E-mail address set to: $_[0]},
125 export1 => q{usage: export <msgno> <filename>},
126 export2 => q{$_[3] has error exporting msg $_[0] to $_[1] ($_[2])},
127 export3 => q{$_[2 ] exported msg $_[0] to $_[1]},
128 filter1 => q{Filter $_[0] updated for $_[1]},
129 filter2 => q{Unknown filter keyword $_[0]},
130 filter3 => q{No filters defined for $_[0]},
131 filter4 => q{$_[0]$_[1] Filter $_[2] deleted for $_[3]},
132 filter5 => q{need some filter commands...},
133 filter6 => q{$_[0]$_[1] Filter for $[2] not found},
134 filter7 => q{$_[0] parse error $_[1] on $_[2]'},
135 grayline1 => q{ Beg of End of},
136 grayline2 => q{Location dd/mm/yyyy Dawn Rise Set Dusk},
137 grids => q{DX Grid enabled for $_[0]},
138 gridu => q{DX Grid disabled for $_[0]},
139 gtks => q{GTK output enabled for $_[0]},
140 gtku => q{GTK output disabled for $_[0]},
141 illcall => q{Sorry, $_[0] is an invalid callsign},
142 hasha => q{$_[0] already exists in $_[1]},
143 hashb => q{$_[0] added to $_[1]},
144 hashc => q{$_[0] removed from $_[1]},
145 hashd => q{$_[0] not in $_[1]'},
146 hashe => q{$_[0] set on $_[1]'},
147 heading => q{Heading},
148 helpe1 => q{Help system unavailable, tell sysop},
149 helpe2 => q{No help available on $_[0]},
150 heres => q{Here set on $_[0]},
151 heade1 => q{Using $main::mycall Coords, consider doing a set/location or set/qra},
152 hereu => q{Here unset on $_[0]},
153 homebbs => q{Home BBS set to: $_[0]},
154 homenode => q{Home Node set to: $_[0]},
155 homenode2 => q{Home Node},
156 hnodee1 => q{Please enter your Home Node, set/homenode <your home DX Cluster>},
157 hnodee2 => q{Failed to set homenode on $_[0]},
158 hnode => q{Your Homenode is now "$_[0]"},
159 init1 => q{sent initialisation message to $_[0]},
160 iso => q{$_[0] Isolated},
161 isou => q{$_[0] UnIsolated},
162 isoc => q{$_[0] created and Isolated},
163 isoari => q{there is an input route filter for $_[0]; clear/route input $_[0] first},
164 isoaro => q{there is an output route filter for $_[0]; clear/route $_[0] first},
165 isow => q{$_[0] is isolated; unset/isolate $_[0] first},
166 join => q{joining group $_[0]},
167 l1 => q{Sorry $_[0], you are already logged on on another channel},
168 l2 => q{Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build},
169 lang => q{Language is now English},
170 lange1 => q{set/language <lang> where <lang> is one of ($_[0])},
171 lange2 => q{failed to set language on $_[0]'},
172 lastconn => q{Last connect},
173 leave => q{leaving group $_[0]},
174 lgset => q{Added $_[0] to the local node group},
175 lgunset => q{Removed $_[0] from the local node group},
176 lh1 => q{$main::data/hop_table.pl doesn't exist},
178 loce1 => q{Please enter your location,, set/location <latitude longitude>},
179 loce2 => q{Cannot recognise "$_[0]" as a Lat/Long (eg 52 20 N 0 16 E)},
180 loce3 => q{$_[0] is a QRA locator, please use: set/qra $_[0]},
181 loc => q{Your Lat/Long is now "$_[0]"},
182 location => q{Location},
183 lockout => q{$_[0] Locked out},
184 lockoutc => q{$_[0] Created and Locked out},
185 lockoutun => q{$_[0] Unlocked},
186 lockoutuse => q{usage: sh/lockout <call>|ALL},
187 loginb => q{Buddy $_[0] has logged in},
188 loginbn => q{Buddy $_[0] has logged in at $_[1]},
189 logoutb => q{Buddy $_[0] has logged out},
190 logoutbn => q{Buddy $_[0] has logged out from $_[1]},
191 loginu => q{User $_[0] has logged in},
192 logoutu => q{User $_[0] has logged out},
193 loginn => q{Node $_[0] has logged in},
194 logoutn => q{Node $_[0] has logged out},
195 m1 => q{Enter Subject (30 characters):},
196 m2 => q{Copy of msg $_[0] sent to $_[1]},
197 m3 => q{Sorry, $_[0] is an unacceptable TO address},
198 m4 => q{Sorry, can't access message $_[0]},
199 m5 => q{Sorry, I need a message number'},
200 m6 => q{Reply to: $_[0]},
201 m7 => q{Subject : $_[0]},
202 m8 => q{Enter lines of text, /EX to send or /ABORT to exit},
203 m9 => q{New mail has arrived for you},
204 m10 => q{Message/Script Aborted},
205 m11 => q{Message no $_[0] saved and directed to $_[1]},
206 m12 => q{Message no $_[0] deleted},
207 m13 => q{Message no $_[0] missing},
208 m14 => q{Message no $_[0] marked as sent to $_[1]},
209 m15 => q{Message no $_[0] unmarked as sent to $_[1]},
210 m16 => q{Need a Message number},
211 m17 => q{Sorry, cannot send messages in $_[0] mode},
212 m18 => q{Sorry, message $_[0] is currently set to KEEP},
213 m19 => q{Startup Script for $_[0] saved, $_[1] lines},
214 m20 => q{Startup Script for $_[0] deleted},
215 m21 => q{$_[0] Working...},
216 m22 => q{Startup Script for $_[0] not found/error $!},
217 maxconnect => q{Max connections on $_[0] set to $_[1]},
218 msg1 => q{Bulletin Messages Queued},
219 msg2 => q{Private Messages Queued},
220 msg3 => q{Msg $_[0]: $_[1] changed from $_[2] to $_[3]},
221 msgu => q{usage: msg <cmd> <msgno> data...},
222 merge1 => q{Merge request for $_[1] spots and $_[2] WWV sent to $_[0]},
223 moon => q{Location dd/mm/yyyy Rise Set},
224 moon_with_azel => q{Location dd/mm/yyyy Rise Set Azim Elev},
225 mond => q{Monitoring Disabled},
226 mone => q{Monitoring Enabled},
228 namee1 => q{Please enter your name, set/name <your name>},
229 namee2 => q{Can't find user $_[0]!},
230 name => q{Your name is now "$_[0]"},
231 nodea => q{$_[0] set as AK1A style Node},
232 nodeac => q{$_[0] created as AK1A style Node},
233 nodeb => q{$_[0] set as BBS},
234 nodebc => q{$_[0] created as BBS},
235 nodec => q{$_[0] set as CLX style Node},
236 nodecc => q{$_[0] created as CLX style Node},
237 noder => q{$_[0] set as AR-Cluster style Node},
238 noderc => q{$_[0] created as AR-Cluster style Node},
239 nodes => q{$_[0] set as DXSpider style Node},
240 nodesc => q{$_[0] created as DXSpider style Node},
241 noden => q{$_[0] set as RBN Feed },
242 nodenc => q{$_[0] created as RBN Feed},
243 nodex => q{$_[0] set as DXNET style Node},
244 nodexc => q{$_[0] created as DXNET style Node},
245 nodeu => q{$_[0] set back as a User},
246 nodee1 => q{You cannot use this command whilst your target ($_[0]) is on-line},
247 notdone => q{NOT Done},
248 nothere => q{Sorry, but $_[0] isn't here at the moment, please try later'},
249 obscount => q{Ping obsolescence count on $_[0] set to $_[1]},
250 ok => q{Operation successful},
251 outconn => q{Outstanding connect to $_[0]},
252 page => q{Press Enter to continue, A to abort ($_[0] lines) >},
253 pagelth => q{Page Length is now $_[0] lines},
254 pagewidth => q{Page width is now $_[0] columns},
255 passerr => q{Please use: SET/PASS <password> <callsign>},
256 passphrase => q{Passphrase set or changed for $_[0]},
257 passphraseu => q{Passphrase removed for $_[0]},
258 password => q{Password set or changed for $_[0]},
259 passwordu => q{Password removed for $_[0]},
260 pc90s => q{PC90 enabled for $_[0]},
261 pc90u => q{PC90 disabled $_[0]},
262 pingo => q{Ping Started to $_[0]},
263 pingi => q{Ping Returned from $_[0] $_[1] (Ave $_[2]) secs},
264 pinge1 => q{Cannot ping yourself!},
265 pingint => q{Ping interval on $_[0] set to $_[1] secs},
266 'pos' => q{From Callsign: $_[0] Lat: $_[1] Long: $_[2]},
267 pr => q{%C de %M %D %T dxspider >},
268 prs => q{Prompt is changed},
269 pru => q{Prompt now set back to default},
270 priv => q{Privilege level changed on $_[0]},
271 prx => q{$main::mycall >},
272 pw0 => q{Enter old password: },
273 pw1 => q{Enter new password: },
274 pw2 => q{Re-enter new password: },
275 pw3 => q{Password changed},
276 pw4 => q{Passwords differ, password NOT changed},
277 qll => q{Please enter your location with set/location or set/qra},
278 qthe1 => q{Please enter your QTH, set/qth <your qth>},
279 qth => q{Your QTH is now "$_[0]"},
280 qrae1 => q{Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)},
281 qrashe1 => q{Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS},
282 qrae2 => q{Cannot recognise "$_[0]" as a QRA locator (eg JO02LQ)},
283 qra => q{Your QRA Locator is now "$_[0]"},
284 rbnusers => qq{RBN User List},
285 qsl1 => q{Call Manager Times Last Time Seen De},
286 rcmdo => q{RCMD "$_[0]" sent to $_[1]},
287 read1 => q{Sorry, no new messages for you},
288 read2 => q{Msg $_[0] not found},
289 read3 => q{Msg $_[0] not available},
290 rec => q{$_[0] records},
291 reg => q{$_[0] registered},
292 regc => q{$_[0] created and registered},
293 reginac => q{Registration is not active (set/var $main::reqreg = 1 to activate)},
294 regun => q{$_[0] unregistered},
295 route => q{$_[0] on $_[1] via $_[2]},
296 sat1 => q{Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins},
297 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
298 sat3 => q{Syntax: SH/SAT <name> [<hours> <interval>]},
299 sat4 => q{Satellites available/Age of Keps (days):-},
300 sat5 => q{need nnnnn.AMSAT in subject to load keps from this message},
301 satnf => q{Satellite $_[0] unknown},
303 set => q{$_[0] enabled for $_[1]},
304 sethop1 => q{usage: set/hops <call> ann|spots|wwv|wcy <no of hops>},
305 sethop2 => q{$_[0] hops set on $_[1]$_[2] for $_[3]'},
306 sethop3 => q{No hops set for $_[0]'},
307 showconf => q{Node Callsigns},
308 shu => q{"SHU" is not enough! you need to type at least "SHUT" to shutdown the node},
309 shutting => q{$main::mycall shutting down...},
310 skims => q{RBN/Skimming set to $_[1] for $_[0]},
311 sloc => q{Cluster lat $_[0] long $_[1], DON'T FORGET TO CHANGE YOUR DXVars.pm},
312 snode1 => q{Node Call Sort Version},
313 snode2 => q{$_[0] $_[1] $_[2]},
314 snode3 => q{$_[0] Unknown Call},
315 sqra => q{Cluster QRA Locator$_[0], DON'T FORGET TO CHANGE YOUR DXVars.pm},
317 spf1 => q{spoof: creating new user $_[0]},
318 stathf => q{HF DX Spot Stats, last $_[1] days from $_[0]},
319 stathft => q{HF DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]},
320 statvhf => q{VHF+ DX Spot Stats, last $_[1] days from $_[0]},
321 statvhft => q{VHF+ DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]},
322 statdx => q{Total DX Spots for $_[1] days from $_[0]},
323 storable => q{Please load the Storable module from CPAN'},
324 sun => q{Location dd/mm/yyyy Rise Set},
325 sun_with_azel => q{Location dd/mm/yyyy Rise Set Azim Elev},
326 susdb1 => q{usage: callsign state city},
327 susdb2 => q{USDB $_[0] was $_[1], $_[2]},
328 susdb3 => q{USDB $_[0] now $_[1], $_[2]},
329 susdb4 => q{USDB $_[0] deleted},
330 suser1 => q{usage: callsign user_field_name value},
331 suser2 => q{User $_[0] not found},
332 suser3 => q{User field '$_[0]' was '$_[1]' now set to '$_[2]'},
333 suser4 => q{User field name '$_[0]' doesn't exist},
334 time1 => q{Local Time: $_[0] $_[1], UTC $_[2]},
335 time2 => q{$_[0] Local (standard) time: $_[1] ($_[2] Hours)},
336 time3 => q{$_[0] $_[1]},
337 talks => q{Talk enabled for $_[0]},
338 talku => q{Talk disabled for $_[0]},
339 talkend => q{Finished talking to you},
340 talkinst => q{Entering Talkmode, /EX to end, /<cmd> to run a command},
341 talknh => q{Sorry $_[0] is not online at the moment},
342 talkprompt => q{Talk ($_[0])>},
343 talkstart => q{Starting talking to you},
344 unset => q{$_[0] disabled for $_[1]},
345 unsethop1 => q{usage: unset/hops <call> ann|spots|wwv|wcy},
346 unsethop2 => q{hops unset on $_[1] for $_[0]'},
348 userconn => q{Callsigns connected to},
349 usernf => q{*** User record for $_[0] not found ***},
350 usstates => q{US State display enabled for $_[0]},
351 usstateu => q{US State display disabled for $_[0]},
352 wante => q{Want $_[0] enabled for $_[1]},
353 wantd => q{Want $_[0] disabled for $_[1]},
354 wcy1 => q{$_[0] is missing or out of range},
355 wcy2 => q{Duplicate WCY},
356 wcy3 => q{Date Hour SFI A K Exp.K R SA GMF Aurora Logger},
357 wcys => q{WCY enabled for $_[0]},
358 wcyu => q{WCY disabled for $_[0]},
359 wpc16s => q{Allow PC16 from $_[0] enabled},
360 wpc16u => q{Allow PC16 from $_[0] disabled},
361 wpc19s => q{Route PC19 for $_[0] enabled},
362 wpc19u => q{Route PC19 for $_[0] disabled},
363 wpc9xs => q{PC9X for $_[0] enabled},
364 wpc9xu => q{PC9X for $_[0] disabled},
365 wwv1 => q{$_[0] is missing or out of range},
366 wwv2 => q{Duplicate WWV},
367 wwv3 => q{Date Hour SFI A K Forecast Logger},
368 wwvs => q{WWV enabled for $_[0]},
369 wwvu => q{WWV disabled $_[0]},
370 wxs => q{WX enabled for $_[0]},
371 wxu => q{WX disabled for $_[0]},
374 addr => q{Addres gezet op: $_[0]},
375 already => q{$_[0] reeds geconnect},
376 anns => q{Announce berichten AAN gezet voor $_[0]},
377 annu => q{Announce berichten UIT gezet voor $_[0]},
378 bbse1 => q{Geef je home bbs (mailbox),, set/bbs <home mailbox>},
379 bbs => q{Je home bbs (mailbox) is nu "$_[0]"},
380 beepoff => q{De beep staat nu UIT},
381 beepon => q{De beep staat nu AAN},
382 conother => q{Sorry $_[0] je bent reeds geconnect op een andere poort},
383 concluster => q{Sorry $_[0] je bent reeds op een ander cluster geconnect},
384 conscript => q{Geen connectscript aangeroepen "$_[0]" gevonden in $main::root/connect},
385 confail => q{Verbinding met $_[0] mislukt ($_[1])},
386 constart => q{Verbinding met $_[0] gestart},
387 disc1 => q{Gedisconnect door $_[0]},
388 disc2 => q{$_[0] gedisconnect},
389 dx1 => q{Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)},
390 dx2 => q{Ik heb een call nodig! [Opdracht: DX freq call commentaar]},
391 dxs => q{DX Spots worden WEL doorgegeven aan $_[0]},
392 dxu => q{DX Spots worden NIET doorgegeven aan $_[0]},
393 e1 => q{Ongeldige opdracht},
394 e2 => q{Fout: $_[0]},
395 e3 => q{$_[0]: $_[1] niet gevonden},
396 e4 => q{Minimaal een prefix of een call nodig},
397 e5 => q{Niet toegestaan},
398 e6 => q{*** Geen station gespecifiseerd ***},
399 e7 => q{Callsign $_[0] is niet zichtbaar op het cluster},
400 e8 => q{Ik heb een call en tekst nodig},
401 e9 => q{Ik heb wel tekst nodig voor een announce!},
402 e10 => q{$_[0] is niet lokaal verbonden},
403 e12 => q{Ik heb een node call nodig},
404 e13 => q{$_[0] is geen node},
405 emaile1 => q{Geef uw E-mail addres, set/email <uw e-mail addres>},
406 emaila => q{Uw E-Mail addres is nu "$_[0]"},
407 email => q{E-mail addres gezet op: $_[0]},
408 helpe1 => q{Help systeem niet beschikbaar, meld dit aan de sysop},
409 helpe2 => q{Geen help beschikbaar over "$_[0]"},
410 heres => q{Aanwezigheid AAN gezet voor $_[0]},
411 heade1 => q{Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra},
412 hereu => q{Aanwezigheid UIT gezet voor $_[0]},
413 homebbs => q{Uw Home mailbox is nu $_[0]},
414 homenode => q{Uw (Home) DX-Cluster is : $_[0]},
415 hnodee1 => q{Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>},
416 hnode => q{Uw (home) DX-cluster is nu "$_[0]"},
417 iso => q{$_[0] is geisoleerd (Isolated)},
418 isou => q{$_[0] is niet meer geisoleerd (UnIsolated)},
419 isoc => q{$_[0] gecreerd en geisoleerd (Isolated)},
420 l1 => q{Sorry $_[0], u bent reeds op een ander kanaal ingelogt},
421 l2 => q{Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version},
422 lang => q{De taal zijn nu Nederlandse},
423 lh1 => q{$main::data/hop_table.pl bestaat niet},
424 loce1 => q{Geef uw coordinaten met, set/location <latitude longitude>},
425 loce2 => q{Herken "$_[0]" niet als Lat/Long (vb 52 20 N 0 16 E)},
426 loc => q{Uw Latitude en Longitude zijn nu "$_[0]"},
427 lockout => q{$_[0] heeft geen toegang meer (Locked out)},
428 lockoutun => q{$_[0] heeft wederom toegang (Unlocked)},
429 m2 => q{$_[0] Informatie: $_[1]},
430 merge1 => q{Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]},
431 msgnew => q{Er is nieuwe post gearriveerd voor u},
432 namee1 => q{Geef aub uw naam met, set/name <uw naam>},
433 namee2 => q{Gebruiker $_[0] niet te vinden!},
434 name => q{Uw naam is gezet op "$_[0]"},
435 node => q{$_[0] gezet als een AK1A stijl DX-cluster},
436 nodeu => q{$_[0] teruggezet naar gebruiker status},
437 nodec => q{$_[0] gecreeerd als AK1A stijl DX-cluster},
438 nodee1 => q{U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is},
439 ok => q{Opdracht succesvol uitgevoerd},
440 page => q{Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >},
441 pagelth => q{Paginalengte gezet op ($_[0]) regels},
442 passerr => q{Gebruik: SET/PASS <wachtwoord> <call>},
443 password => q{Wachtwoord gezet of gewijzigd voor $_[0]},
444 pingo => q{Ping gestart naar $_[0]},
445 pingi => q{Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs},
446 priv => q{Privilege level gewijzigd op $_[0]},
447 prx => q{$main::mycall >},
448 qll => q{Geef uw locator met set/location of set/qra},
449 qthe1 => q{Geef uw woonplaats met, set/qth <woonplaats>},
450 qth => q{Uw QTH is nu "$_[0]"},
451 qrae1 => q{Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)},
452 qrashe1 => q{Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS},
453 qrae2 => q{Ik herken "$_[0]" niet als een QRA locator (vb JO33FD)},
454 qra => q{Uw QRA Locator is nu "$_[0]"},
455 rcmdo => q{RCMD "$_[0]" verzonden naar $_[1]},
456 read1 => q{Sorry, geen berichten voor u},
457 read2 => q{Bericht $_[0] niet gevonden},
458 read3 => q{Bericht $_[0] niet beschikbaar},
459 shutting => q{$main::mycall gaat QRT...},
460 sloc => q{Cluster lat $_[0] long $_[1], DON'T FORGET TO CHANGE YOUR DXVars.pm},
461 sqra => q{Cluster QRA Locator$_[0], DON'T FORGET TO CHANGE YOUR DXVars.pm},
462 talks => q{Talk berichten AAN gezet voor $_[0]},
463 talku => q{Talk berichten UIT gezet voor $_[0]},
464 usernf => q{*** Gebruiker info van $_[0] niet gevonden ***},
465 wwvs => q{WWV berichten AAN gezet voor $_[0]},
466 wwvu => q{WWV berichten UIT gezet voor $_[0]},
467 wxs => q{WX berichten AAN gezet voor $_[0]},
468 wxu => q{WX berichten UIT gezet voor $_[0]},
472 addr => q{Adresse fixée à : $_[0]},
473 already => q{$_[0] déjà connecté},
474 anns => q{Annonces activées pour $_[0]},
475 annu => q{Annonces désactivées pour $_[0]},
476 annts => q{AnnTalk activé pour $_[0]},
477 anntu => q{AnnTalk désactivé pour $_[0]},
478 at => q{connecté en ce moment sur},
479 badnode1 => q{Le serveur $_[0] est maintenant en rejet},
480 badnode2 => q{Le serveur $_[0] n'est maintenant plus en rejet},
481 badnode3 => q{Liste des serveurs en rejet :-},
482 bbse1 => q{Veuillez entrer l'adresse de votre BBS avec : set/bbs <votre_BBS>},
483 bbs => q{Votre BBS est définie comme étant "$_[0]"},
484 beepoff => q{Bips désactivés},
485 beepon => q{Bips activés},
486 call1 => q{Recherche de l'indicatif via $_[0]:},
487 conother => q{Désolé $_[0], vous êtes déjà connecté sur un autre port},
488 concluster => q{Désolé $_[0], vous êtes déjà connecté ailleurs au cluster (sur $_[1])},
489 conscript => q{Pas de script de connexion "$_[0]" dans $main::root/connect !},
490 confail => q{Echec de la connexion avec $_[0] ($_[1])},
491 constart => q{Etablissement de la connexion avec $_[0]},
492 deluser => q{L'utilisateur $_[0] a été supprimé},
493 db1 => q{Cette base de données est hébergée sur $_[0]},
494 db2 => q{Désolé, mais la clé: $_[0] est introuvable dans $_[1]},
495 db3 => q{Désolé, la base de données $_[0] n'existe pas ici},
496 db4 => q{Désolé, la base de données $_[0] sur $_[1] n'est pas en ligne actuellement},
497 db5 => q{Accès à la base de données distante sur $_[0] en cours...veuillez patienter !},
498 db6 => q{La base de données $_[0] existe déjà; vous devez d'abord la supprimer},
499 db7 => q{Base de données $_[0] créée pour le serveur distant $_[1]},
500 db8 => q{Base de données $_[0] créée en local},
501 db9 => q{Base de données $_[0] supprimée},
502 db10 => q{$_[0] enregistrements importés dans $_[1]},
503 db11 => q{Envoi de votre requête à $_[0], veuillez patienter...},
504 db12 => q{Base de données Serveur Commande Chaînage},
505 dfreq1 => q{Fréquence $_[0] non valable. Il faut par exemple: 0/30000 ou hf ou hf/cw'},
506 dir1 => q{Aucun message trouvé !},
507 disc1 => q{Déconnecté par $_[0]},
508 disc2 => q{Canal $_[0] déconnecté},
509 disc3 => q{Pas de canal, mais connexion $_[0] terminée},
510 disc4 => q{Pas de canal ni de connexion mais "orphelin" $_[0] déconnecté},
512 dup => q{Désolé, ceci est un doublon.},
513 dx1 => q{La fréquence $_[0] est hors bande (voir show/band); syntaxe: DX [BY indicatif] fréquence indicatif remarques},
514 dx2 => q{L'indicatif manque; syntaxe : DX [BY indicatif] fréquence indicatif remarques},
515 dx3 => q{Indicatif ou fréquence non valable.},
516 dxcqs => q{Zones DX CQ activées pour $_[0]},
517 dxcqu => q{Zones DX CQ désactivées pour $_[0]},
518 dxitus => q{Zones DX UIT activées pour $_[0]},
519 dxituu => q{Zones DX UIT désactivées pour $_[0]},
520 dxs => q{Infos DX activées pour $_[0]},
521 dxu => q{Infos DX désactivées pour $_[0]},
522 e1 => q{Commande inconnue},
523 e2 => q{Erreur: $_[0]},
524 e3 => q{$_[0]: $_[1] non trouvé},
525 e4 => q{Il faut au moins un préfixe ou un indicatif},
526 e5 => q{Non autorisé.},
527 e6 => q{*** Aucune station spécifiée ***},
528 e7 => q{$_[0] n'est pas atteignable sur le cluster},
529 e8 => q{Il faut un indicatif et du texte.},
530 e9 => q{Il faut un texte.},
531 e10 => q{$_[0] n'est pas connecté localement},
532 e11 => q{Le destinataire ne peut pas être $main:mycall},
533 e12 => q{Il faut spécifier un indicatif de serveur !},
534 e13 => q{$_[0] n'est pas un serveur},
535 e14 => q{Le premier argument doit être une valeur numérique > 0},
536 e15 => q{Paramètre incorrect : "$_[0]"},
537 e16 => q{Le fichier "$_[0]" existe déjà},
538 e17 => q{Prière de ne pas utiliser les mots : @_ ici !'},
539 e18 => q{Connexion impossible avec $_[0] ($!)},
540 e19 => q{Caractère non valide dans la ligne $_[0]},
541 e20 => q{Symbole $_[0] non reconnu},
542 e21 => q{$_[0] n'est pas une valeur numérique},
543 e22 => q{$_[0] n'est pas un indicatif},
544 e23 => q{$_[0] n'est pas un intervalle (exemple: 0/30000)'},
545 e24 => q{Désolé, l'accès à Internet n'est pas actif},
546 e25 => q{Désolé, la valeur doit être entre $_[0] et $_[1]},
547 e26 => q{Trop d'erreurs simultanées; vous allez être déconnecté !},
548 e27 => q{$_[0] n'est un préfixe ni sa valeur numérique.'},
549 e28 => q{Désolé, vous devez d'abord vous enregistrer (SP $main::myalias pour ce faire)},
550 e29 => q{Il faut un mot de passe !},
551 e30 => q{Impossible d'ouvrir $_[0] $!},
552 e31 => q{$_[0] n'est pas un utilisateur'},
553 e32 => q{Il faut une phrase secrète !},
554 e33 => q{$_[0] n'est pas un nombre de jours ou une date valable},
555 e34 => q{Il faut un GROUPE puis du texte},
556 e35 => q{Vous n'êtes pas un membre de $_[0], rejoignez $_[0]},
558 echoon => q{Echo activé},
559 echooff => q{Echo désactivé},
560 echow => q{L'écho est actuellement désactivé (set/echo pour l'activer)},
561 emaile1 => q{Veuillez entrer votre adresse e-mail avec : set/email <votre_adresse_e-mail>},
562 emaila => q{Votre adresse e-mail est enregistrée comme étant "$_[0]"},
563 email => q{Adresse e-mail définie comme étant $_[0]},
564 export1 => q{Syntaxe: export <numéro_de_msg> <nom_de_fichier>},
565 export2 => q{$_[3] rencontre une erreur à l'exportation du message $_[0] vers $_[1] ($_[2])},
566 export3 => q{$_[2 ] a exporté le message $_[0] vers $_[1]},
567 filter1 => q{Filtre $_[0] mis à jour dans $_[1]},
568 filter2 => q{Mot clé de filtrage inconnu : $_[0]},
569 filter3 => q{Pas de filtres définis pour $_[0]},
570 filter4 => q{$_[0]$_[1] Filtre $_[2] supprimé pour $_[3]},
571 filter5 => q{Il faut une commande de filtrage...},
572 filter6 => q{$_[0]$_[1] Filtre pour $[2] introuvable},
573 grids => q{Fonction DX Grid activée pour $_[0]},
574 gridu => q{Fonction DX Grid désactivée pour $_[0]},
575 illcall => q{Désolé, $_[0] n'est pas un indicatif valable},
576 hasha => q{$_[0] existe déjà dans $_[1]},
577 hashb => q{$_[0] ajouté à $_[1]},
578 hashc => q{$_[0] retiré de $_[1]},
579 hashd => q{$_[0] n'est pas dans $_[1]'},
580 hashe => q{$_[0] ajouté le $_[1]'},
581 heading => q{Azimut},
582 helpe1 => q{Système d'aide non disponible, prière de prévenir le sysop},
583 helpe2 => q{Pas d'aide disponible sur $_[0]},
584 heres => q{$_[0] est présent},
585 heade1 => q{Calcul avec les coordonnées de $main::mycall; pensez à faire un set/location ou set/qra !},
586 hereu => q{$_[0] est absent},
587 homebbs => q{BBS usuelle définie comme étant $_[0]},
588 homenode => q{Serveur cluster usuel défini comme étant $_[0]},
589 homenode2 => q{Utilise},
590 hnodee1 => q{Veuillez entrer votre serveur cluster usuel (set/homenode <votre_serveur>)},
591 hnodee2 => q{Impossible de définir votre serveur usuel comme étant $_[0]},
592 hnode => q{Votre serveur cluster usuel est défini comme étant "$_[0]"},
593 init1 => q{Message d'initialisation envoyé à $_[0]},
594 iso => q{$_[0] isolé},
595 isou => q{$_[0] n'est plus isolé},
596 isoc => q{$_[0] créé et isolé},
597 isoari => q{Il existe un filtre de route entrante pour $_[0]; utilisez d'abord clear/route $_[0]},
598 isoaro => q{Il existe un filtre de route sortante pour $_[0]; utilisez d'abord clear/route $_[0]},
599 isow => q{$_[0] est isolé; utilisez d'abord unset/isolate $_[0]},
600 join => q{Affiliation au groupe $_[0]},
601 l1 => q{Désolé $_[0], vous êtes déjà connecté sur un autre canal},
602 l2 => q{Bonjour $_[0], bienvenue sur $main::mycall à $main::myqth\nServeur DXSpider V$main::version ($main::build)},
603 lang => q{Je parle maintenant français},
604 lange1 => q{Syntaxe : set/language <langue>, où <langue> est à choisir parmi ($_[0])},
605 lange2 => q{Impossible de fixer la langue à $_[0]'},
606 lastconn => q{Dernière conn},
607 leave => q{Départ du groupe $_[0]},
608 lh1 => q{$main::data/hop_table.pl n'existe pas},
610 loce1 => q{Veuillez entrer vos coordonnées avec : set/location <latitude longitude>},
611 loce2 => q{"$_[0]" n'est visiblement pas une latitude/longitude (ex: 46 20 N 6 12 E)},
612 loce3 => q{$_[0] est un QTH locator, veuillez utiliser : set/qra $_[0]},
613 loc => q{Votre latitude/longitude est enregistrée comme étant "$_[0]"},
614 location => q{Coordonnées},
615 lockout => q{$_[0] exclus},
616 lockoutc => q{$_[0] créé et exclus},
617 lockoutun => q{$_[0] n'est plus exclus},
618 lockoutuse => q{Syntaxe : sh/lockout <indicatif>|ALL},
619 loginu => q{L'utilisateur $_[0] s'est connecté},
620 logoutu => q{L'utilisateur $_[0] s'est déconnecté},
621 loginn => q{Le serveur $_[0] s'est connecté},
622 logoutn => q{Le serveur $_[0] s'est déconnecté},
623 m1 => q{Veuillez entrer le sujet (max. 30 caractères):},
624 m2 => q{Copie du message $_[0] envoyée à $_[1]},
625 m3 => q{Désolé, $_[0] n'est pas une adresse de destination acceptable},
626 m4 => q{Désolé, impossible d'accéder au message $_[0]},
627 m5 => q{Il faut spécifier un numéro de message !'},
628 m6 => q{Réponse à : $_[0]},
629 m7 => q{Sujet : $_[0]},
630 m8 => q{Entrez maintenant le texte (fin avec <Ctrl-Z> ou /EX, abandon avec /ABORT)},
631 m9 => q{Vous avez du nouveau courrier (tapez R pour le lire)},
632 m10 => q{Entrée du message abandonnée},
633 m11 => q{Message numéro $_[0] enregistré et transmis à $_[1]},
634 m12 => q{Message numéro $_[0] supprimé},
635 m13 => q{Message numéro $_[0] introuvable},
636 m14 => q{Message numéro $_[0] marqué comme envoyé à $_[1]},
637 m15 => q{Message numéro $_[0] marqué comme non envoyé à $_[1]},
638 m16 => q{Il faut un numéro de message !},
639 m17 => q{Désolé, impossible d'envoyer des messages en mode $_[0]},
640 m18 => q{Désolé, le message $_[0] possède actuellement le statut KEEP},
641 msg1 => q{Bulletins mis en file d'attente},
642 msg2 => q{Messages personnels mis en file d'attente},
643 msg3 => q{Message $_[0]: $_[1] changé de $_[2] en $_[3]},
644 msgu => q{Syntaxe: msg <commande> <numéro_de_message> données...},
645 merge1 => q{Demande de fusionnement de $_[1] infos DX et $_[2] WWV envoyée à $_[0]},
646 moon => q{Emplacement jj/mm/aaaa Lever Coucher},
647 moon_with_azel => q{Emplacement jj/mm/aaaa Lever Coucher Azim Elev},
648 mond => q{Monitoring désactivé},
649 mone => q{Monitoring activé},
651 namee1 => q{Veuillez entrer votre nom avec : set/name <votre_nom>},
652 namee2 => q{Utilisateur $_[0] introuvable.},
653 name => q{Votre nom est enregistré comme étant "$_[0]"},
654 nodea => q{$_[0] défini comme serveur de type AK1A},
655 nodeac => q{$_[0] créé comme serveur de type AK1A},
656 nodeb => q{$_[0] défini comme BBS},
657 nodebc => q{$_[0] créé comme BBS},
658 nodec => q{$_[0] défini comme serveur de type CLX},
659 nodecc => q{$_[0] créé comme serveur de type CLX},
660 noder => q{$_[0] défini comme serveur de type AR-Cluster},
661 noderc => q{$_[0] créé comme serveur de type AR-Cluster},
662 nodes => q{$_[0] défini comme serveur de type DXSpider},
663 nodesc => q{$_[0] créé comme serveur de type DXSpider},
664 nodex => q{$_[0] défini comme serveur de type DXNET},
665 nodexc => q{$_[0] créé comme serveur de type DXNET},
666 nodeu => q{$_[0] défini comme utilisateur},
667 nodee1 => q{Vous ne pouvez pas utiliser cette commande pendant que sa cible ($_[0]) est en ligne},
668 notdone => q{PAS fait},
669 nothere => q{désolé, $_[0] n'est pas là en ce moment...'},
670 obscount => q{Compteur d'obsolescence des pings vers $_[0] mis à $_[1]},
671 ok => q{Opération réussie},
672 outconn => q{Connexion en cours avec $_[0]},
673 page => q{<Enter> pour continuer ou <A> pour arrêter (il reste $_[0] lignes) >},
674 pagelth => q{Longueur de page fixée à $_[0]},
675 passerr => q{Veuillez utiliser: SET/PASS <mot_de_passe> <indicatif>},
676 passphrase => q{Phrase secrète définie ou modifiée pour $_[0]},
677 passphraseu => q{Phrase secrète supprimée pour $_[0]},
678 password => q{Mot de passe défini ou modifié pour $_[0]},
679 passwordu => q{Mot de passe supprimé pour $_[0]},
680 pc90s => q{PC90 activé pour $_[0]},
681 pc90u => q{PC90 désactivé pour $_[0]},
682 pingo => q{Ping envoyé vers $_[0]},
683 pingi => q{Ping retourné par $_[0] en $_[1] (moyenne $_[2]) secondes},
684 pinge1 => q{Vous ne pouvez pas vous pinger vous-même !},
685 pingint => q{Intervalle de ping vers $_[0] fixé à $_[1] secondes},
686 'pos' => q{Indicatif source : latitude $_[0] : longitude $_[1] : $_[2]},
687 prs => q{Prompt défini comme étant "$_[0]"},
688 pru => q{Prompt remis à sa valeur par défaut},
689 priv => q{Niveau de privilège changé en $_[0]},
690 prx => q{$main::mycall >},
691 pw0 => q{Entrez l'ancien mot de passe : },
692 pw1 => q{Entrez le nouveau mot de passe : },
693 pw2 => q{Confirmez le nouveau mot de passe : },
694 pw3 => q{Mot de passe modifié},
695 pw4 => q{Les mots de passe sont différents, changement PAS effectué},
696 qll => q{Veuillez entrer votre emplacement avec set/location ou set/qra},
697 qthe1 => q{Veuillez entrer votre QTH, set/qth <votre_qth>},
698 qth => q{Votre QTH est enregistré comme étant "$_[0]"},
699 qrae1 => q{Veuillez entrer votre QRA locator, set/qra <qra_locator> (exemple : set/qra JN36BE)},
700 qrashe1 => q{Veuillez entrer un QRA locator, par exemple: sh/qra JN36BE or sh/qra JN36BE JO31NS},
701 qrae2 => q{"$_[0]" n'est pas un QRA locator (exemple: JN36BE)},
702 qra => q{Votre QRA Locator est enregistré comme étant "$_[0]"},
703 qsl1 => q{Indicatif Manager Fois Dernière annonce Par},
704 rcmdo => q{RCMD "$_[0]" envoyé à $_[1]},
705 read1 => q{Désolé, pas de nouveaux messages pour vous.},
706 read2 => q{Message $_[0] introuvable},
707 read3 => q{Message $_[0] non disponible},
708 rec => q{$_[0] enregistrements},
709 reg => q{$_[0] enregistré},
710 regc => q{$_[0] créé et enregistré},
711 reginac => q{Le mode Enregistré n'est pas actif (set/var \$main::reqreg = 1 pour l'activer)},
712 regun => q{Enregistrement de $_[0] supprimé},
713 route => q{$_[0] sur $_[1] via $_[2]},
714 sat1 => q{Table de poursuite pour $_[0] pour les prochaines $_[1] heures toutes les $_[2] minutes},
715 sat2 => q{jj/mm UTC Lat Lon Alt Km Az El Dist Km},
716 sat3 => q{Syntaxe: SH/SAT <nom> [<heures> <intervalle>]},
717 sat4 => q{Satellites disponibles/Age des éléments orbitaux (jours):-},
718 sat5 => q{nnnnn.AMSAT doit figurer dans le sujet pour que des éléments orbitaux puissent être chargés à partir de ce message},
719 satnf => q{Satellite $_[0] inconnu},
721 set => q{$_[0] activé pour $_[1]},
722 sethop1 => q{Syntaxe: set/hops <indicatif> ann|spots|route|wwv|wcy <nombre_de_hops>},
723 sethop2 => q{$_[0] hops définis pour $_[1]$_[2] vers $_[3]'},
724 sethop3 => q{Pas de nombre de hops défini vers $_[0]'},
725 showconf => q{Serveur Utilisateurs},
726 shu => q{"SHU" ne suffit pas. Vous devez taper au moins "SHUT" pour arrêter le serveur !},
727 shutting => q{$main::mycall en cours d'arrêt...},
728 sloc => q{Latitude du serveur $_[0], longitude $_[1]. N'OUBLIEZ PAS D'ADAPTER VOTRE DXVars.pm},
729 snode1 => q{Serveur Type Version},
730 snode2 => q{$_[0] $_[1] $_[2]},
731 snode3 => q{$_[0] Indicatif inconnu},
732 sqra => q{QRA Locator du serveur: $_[0]. N'OUBLIEZ PAS D'ADAPTER VOTRE DXVars.pm},
733 sorry => q{Désolé !},
734 spf1 => q{spoof: création du nouvel utilisateur $_[0]},
735 stathf => q{Statistiques des infos DX en ondes courtes, 31 derniers jours :},
736 stathft => q{Statistiques des infos DX en ondes courtes, 31 derniers jours pour le DXCC $_[0] :},
737 statvhf => q{Statistiques des infos DX en VHF et au-delà, 31 derniers jours :},
738 statvhft => q{Statistiques des infos DX en VHF et au-delà, 31 jours derniers pour le DXCC $_[0] :},
739 statdx => q{Total des infos DX des 31 derniers jours},
740 sun => q{Emplacement jj/mm/aaaa Lever Coucher},
741 sun_with_azel => q{Emplacement jj/mm/aaaa Lever Coucher Azim Elev},
742 susdb1 => q{Syntaxe : indicatif état ville},
743 susdb2 => q{USDB $_[0] était $_[1], $_[2]},
744 susdb3 => q{USDB $_[0] est maintenant $_[1], $_[2]},
745 susdb4 => q{USDB $_[0] supprimé},
746 suser1 => q{Syntaxe : indicatif nom_de_champ_utilisateur valeur},
747 suser2 => q{Utilisateur $_[0] non trouvé},
748 suser3 => q{Champ utilisateur '$_[0]' modifié de '$_[1]' à '$_[2]'},
749 suser4 => q{Le nom de champ utilisateur '$_[0]' n'existe pas},
750 time1 => q{Heure locale: $_[0] $_[1] ($_[2])},
751 time2 => q{$_[0] Heure locale (normale): $_[1] (UTC $_[2])},
752 time3 => q{$_[0] $_[1]},
753 talks => q{Talk activé pour $_[0]},
754 talku => q{Talk désactivé pour $_[0]},
755 talkend => q{conversation terminée avec vous},
756 talkinst => q{Passage en mode conversation (/EX = terminer, /<cmd> = exécuter une commande)},
757 talknh => q{désolé, $_[0] n'est pas connecté en ce moment},
758 talkprompt => q{Talk ($_[0])>},
759 talkstart => q{début de conversation avec vous},
760 unset => q{$_[0] désactivé pour $_[1]},
761 unsethop1 => q{Syntaxe: unset/hops <indicatif> ann|spots|route|wwv|wcy},
762 unsethop2 => q{Nombre de hops supprimé vers $_[1] pour $_[0]'},
763 user => q{Utilisateur},
764 userconn => q{Utilisateurs connectés sur},
765 usernf => q{*** Pas d'enregistrement utilisateur trouvé pour $_[0] ***},
766 usstates => q{Affichage des états US activé pour $_[0]},
767 usstateu => q{Affichage des états US désactivé pour $_[0]},
768 wcy1 => q{$_[0] manque ou est une valeur hors limites},
769 wcy2 => q{Annonce WCY double},
770 wcy3 => q{ Date Heure SFI A K Kprévu R SA GMF Aurora Source},
771 wcys => q{WCY activé pour $_[0]},
772 wcyu => q{WCY désactivé pour $_[0]},
773 wpc16s => q{PC16 provenant de $_[0] autorisés},
774 wpc16u => q{PC16 provenant de $_[0] refusés},
775 wpc19s => q{Routage des PC19 pour $_[0] activé},
776 wpc19u => q{Routage des PC19 pour $_[0] désactivé},
777 wwv1 => q{$_[0] manque ou est une valeur hors limites},
778 wwv2 => q{Annonce WWV double},
779 wwv3 => q{ Date Heure SFI A K Prévision Source},
780 wwvs => q{WWV activé pour $_[0]},
781 wwvu => q{WWV désactivé pour $_[0]},
782 wxs => q{WX activé pour $_[0]},
783 wxu => q{WX désactivé pour $_[0]},
786 addr => q{La dirección es ahora: $_[0]},
787 already => q{$_[0] ya está conectado},
788 anns => q{Activada la recepción de anuncios para $_[0]},
789 annu => q{Desactivada la recepción de anuncios para $_[0]},
790 annts => q{Modo AnnTalk activado para $_[0]},
791 anntu => q{Modo AnnTalk desactivado para $_[0]},
793 badnode1 => q{No se aceptan spots con origen en $_[0], se añade a la lista badnode},
794 badnode2 => q{Se aceptan spots del nodo $_[0], sale de la lista badnode},
795 badnode3 => q{Lista de nodos rechazados:},
796 bbse1 => q{Por favor introduce tu BBS, set/bbs <tu bbs>},
797 bbs => q{Tu BBS es ahora "$_[0]"},
798 beepoff => q{Avisos sonoros desactivados},
799 beepon => q{Avisos sonoros activados},
800 believes => q{Creo en el nodo $_[0] via $_[1]},
801 believeu => q{No creo en el nodo $_[0] via $_[1]},
802 buddya => q{$_[0] se añade a tu lista de indicativos amigos},
803 buddyu => q{$_[0] se elimina de tu lista de indicativos amigos},
804 call1 => q{Se encontró el indicativo vía $_[0]:},
805 chatend => q{Finalizado el modo chat en el canal $_[0]},
806 chatinst => q{Entrando en modo Chat en el canal $_[0], /EX para salir, /<cmd> para ejecutar un comando},
807 chatprompt => q{Chat ($_[0])>},
808 chattoomany => q{Operación no permitida, actualmente estas en el canal $_[1], usa /chat $_[0]},
809 conother => q{Lo siento $_[0] ya estás conectado en otro puerto},
810 concluster => q{Lo siento $_[0] ya estás conectado en otro cluster},
811 conscript => q{No hay ningún script que se llame "$_[0]" en $main::root/connect},
812 confail => q{La conexión con $_[0] ha fallado ($_[1])},
813 constart => q{Se inicia la conexión a $_[0]},
814 conbump => q{Reconectado como $_[0] en $_[1], Esta sesión termina y se te desconecta},
815 deluser =>'El usuario $_[0] ha sido borrado de la base de datos',
817 db1 => q{Esta base de datos está en $_[0]},
818 db2 => q{Lo siento, pero no se encontró $_[0] en $_[1]},
819 db3 => q{Lo siento, la base de datos $_[0] no existe aquí},
820 db4 => q{Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible},
821 db5 => q{Accediendo a la base de datos remota $_[0]...espere...},
822 db6 => q{La base de datos $_[0] ya existe, bórrala primero},
823 db7 => q{La base de datos $_[0] creada para el nodo remoto $_[1]},
824 db8 => q{Base de datos $_[0] creada localmente},
825 db9 => q{La base de datos $_[0] ha sido eliminada},
826 db10 => q{$_[0] registros importados para la base de datos $_[1]},
827 db11 => q{Tu petición ha sido enviada a $_[0], por favor espera...},
828 dfreq1 => q{La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw},
829 dir1 => q{No hay mensajes nuevos},
831 disc2 => q{Canal $_[0] desconectado},
832 disc3 => q{No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada},
833 disc4 => q{No existía el canal o la conexión, $_[0] se elimina},
834 done => q{Comando ejecutado con éxito.},
835 dup => q{Lo siento, esto es un duplicado},
836 dx1 => q{Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario},
837 dx2 => q{Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario},
838 dx3 => q{El indicativo o la frecuencia es incorrecta},
839 dxcqs => q{Activada la recepción de Zonas CQ en spots de DX para $_[0]},
840 dxcqu => q{Desactivada la recepción de Zonas CQ en spots de DX para $_[0]},
841 dxitus => q{Activada la recepción de Zonas ITU en spots de DX para $_[0]},
842 dxituu => q{Desactivada la recepción de Zonas ITU en spots de DX para $_[0]},
843 dxs => q{Activada la recepción de spots de DX para $_[0]},
844 dxu => q{Desactivada la recepción de spots de DX para $_[0]},
845 e1 => q{Este comando no es válido},
846 e2 => q{Error: $_[0]},
847 e3 => q{$_[0]: $_[1] no encontrado},
848 e4 => q{Se necesita, por lo menos, un prefijo o indicativo},
849 e5 => q{No estás autorizado},
850 e6 => q{*** No se ha especificado una estación ***},
851 e7 => q{$_[0] no está visible en la red actualmente},
852 e8 => q{Se necesita un indicativo y algún texto},
853 e9 => q{Se necesita al menos algún texto},
854 e10 => q{$_[0] no se encuentra conectado},
855 e11 => q{No puedes usar tu propio $main:mycall como destino},
856 e12 => q{Se necesita el indicativo del nodo},
857 e13 => q{$_[0] no es un nodo},
858 e14 => q{El primer argumento debe de ser numérico y > 0},
859 e15 => q{calificador no válido "$_[0]"},
860 e16 => q{El fichero "$_[0]" ya existe},
861 e17 => q{Por favor no uses la palabra: @_ aquí},
862 e18 => q{No se puede conectar con $_[0] ($!)},
863 e19 => q{Carácter no válido en la línea $_[0]},
864 e20 => q{Símbolo $_[0] no reconocido},
865 e21 => q{$_[0] no es numérico},
866 e22 => q{$_[0] no es un indicativo},
867 e23 => q{$_[0] fuera de rango (ej: 0/30000)},
868 e24 => q{Lo siento, el acceso a internet no está habilitado},
869 e25 => q{Lo siento el valor debe de estar entre $_[0] y $_[1]},
870 e26 => q{Demasiados errores, serás desconectado},
871 e27 => q{$_[0] no es un número o un prefijo},
872 e28 => q{Lo siento, necesitas registrarte (SP $main::myalias para registrarte)', },
873 e29 => q{Necesitas password'},
874 e30 => q{No se puede abrir $_[0] $!},
875 e31 => q{$_[0] no es un usuario'},
876 e32 => q{Se necesita una frase de contraseña},
877 e33 => q{$_[0] No es un número de días o una fecha válida},
878 e34 => q{Se necesita un grupo y algún texto},
879 e35 => q{No eres un miembro del grupo $_[0], usa join $_[0] para entrar en este grupo},
880 e36 => q{Solo puedes hacer esto desde el prompt de usuario},
882 echoon => q{Eco local activado},
883 echooff => q{Eco local desactivado},
884 echow => q{*Eco local desactivado, set/echo para activarlo},
885 emaile1 => q{Por favor introduce tu E-mail, set/email <tu E-mail>},
886 emaila => q{Tu dirección E-mail es ahora "$_[0]"},
887 email => q{La dirección E-mail es ahora: $_[0]},
888 export1 => q{uso: export <número_mensaje> <nombre_fichero>},
889 export2 => q{$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])},
890 export3 => q{$_[2 ] exportando mensaje $_[0] a $_[1]},
891 filter1 => q{Filtro $_[0] actualizado con el nombre $_[1]},
892 filter2 => q{Es necesario un valor para $_[0]},
893 filter3 => q{No hay filtros definidos para $_[0]},
894 filter4 => q{Filtro número $_[2] del tipo: $_[0]$_[1] borrado para $_[3]},
895 filter5 => q{Se necesitan algunos comandos para el filtro...},
896 filter6 => q{$_[0]$_[1] Filtro para $[2] no encontrado},
897 grids => q{Activada recepción de locators en spot (DX Grid) para $_[0]},
898 gridu => q{Desactivada recepción de locators en spot (DX Grid) para $_[0]},
899 gtks => q{Terminal GTK activado para $_[0]},
900 gtku => q{Terminal GTK desactivado para $_[0]},
901 illcall => q{Lo siento, $_[0] no es un indicativo válido},
902 hasha => q{$_[0] ya existe en $_[1]},
903 hashb => q{$_[0] añadido a $_[1]},
904 hashc => q{$_[0] eliminado de $_[1]},
905 hashd => q{$_[0] no se encuentra en $_[1]},
906 hashe => q{$_[0] activado $_[1]},
908 helpe1 => q{La ayuda no está disponible, comunícaselo al sysop},
909 helpe2 => q{No hay ayuda disponible para $_[0]},
910 heres => q{Se informa a la red: $_[0] está presente},
911 heade1 => q{Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra},
912 hereu => q{Se informa a la red: $_[0] está ausente},
913 homebbs => q{Tu BBS es ahora: $_[0]},
914 homenode => q{Tu cluster habitual es ahora: $_[0]},
915 hnodee1 => q{Por favor introduce tu cluster habitual, set/homenode <Tu DX cluster>},
916 hnodee2 => q{Error al definir homenode en $_[0]},
917 hnode => q{Tu nodo habitual es ahora "$_[0]"},
918 init1 => q{Enviado mensaje de inicialización a $_[0]},
919 iso => q{El cluster $_[0] se pone en modo pasivo (Aislado)},
920 isou => q{El cluster $_[0] se pone en modo activo},
921 isoc => q{$_[0] creado y definido como pasivo (Aislado)},
922 isoari => q{Existe un filtro de rutas "input" para $_[0]; clear/route input $_[0] primero},
923 isoaro => q{Existe un filtro de rutas para $_[0]; clear/route $_[0] primero', },
924 isow => q{$_[0] está en modo aislado; unset/isolate $_[0] primero},
925 join => q{Entras en el grupo $_[0]},
926 l1 => q{Lo siento $_[0], ya estás conectado en otro canal},
927 l2 => q{Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version},
928 lang => q{El idioma seleccionado es el Español},
929 lange1 => q{set/language <idioma> donde <idioma> es uno entre ($_[0])},
930 lange2 => q{Error al seleccionar idioma en $_[0]},
931 lastconn => q{Última conexión},
932 leave => q{Abandonas el grupo $_[0]},
933 lh1 => q{$main::data/hop_table.pl no existe},
935 loce1 => q{Por favor introduce tu posición, set/location <latitud longitud>},
936 loce2 => q{No se reconoce "$_[0]" como una Lat/Long (ej: 52 20 N 0 16E)},
937 loce3 => q{$_[0] es un QRA locator, por favor usa: set/qra $_[0]},
938 loc => q{Tu Lat/Long es ahora "$_[0]"},
939 location => q{Location},
940 lockout => q{$_[0] Excluido del sistema},
941 lockoutc => q{$_[0] Creado y excluido del sistema},
942 lockoutun => q{$_[0] Autorizado para conectar},
943 lockoutuse => q{Uso: sh/lockout <indicativo|prefijo>|ALL},
944 loginb => q{El colega $_[0] ha conectado},
945 loginbn => q{El colega $_[0] ha conectado en $_[1]},
946 logoutb => q{El colega $_[0] se ha desconectado},
947 logoutbn => q{El colega $_[0] se ha desconectado de $_[1]},
948 loginu => q{$_[0] conecta},
949 logoutu => q{$_[0] se desconecta},
950 loginn => q{$_[0] conecta},
951 logoutn => q{$_[0] se desconecta},
952 m1 => q{Introduce el título (máx. 30 caractéres):},
953 m2 => q{Copia del mensaje $_[0] enviada a $_[1]},
954 m3 => q{Lo siento, $_[0] no se aceptan mensajes a ese tópico},
955 m4 => q{Lo siento, no se puede acceder al mensaje $_[0]},
956 m5 => q{Lo siento, se necesita un número de mensaje},
957 m6 => q{Reenviado a: $_[0]},
958 m7 => q{Título : $_[0]},
959 m8 => q{Introduce mensaje. /EX para terminar o /ABORT para interrumpir},
960 m9 => q{Hay correo nuevo para ti. Bórralo una vez leído.},
961 m10 => q{Mensaje interrumpido},
962 m11 => q{Mensaje nr $_[0] guardado y enviado a $_[1]},
963 m12 => q{Mensaje nr $_[0] borrado},
964 m13 => q{Mensaje nr $_[0] no encontrado},
965 m14 => q{Mensaje nr $_[0] marcado para ser enviado a $_[1]},
966 m15 => q{El mensaje nr $_[0] no se enviará a $_[1]},
967 m16 => q{Se necesita un número de mensaje},
968 m17 => q{Lo siento, no puedo enviar el mensaje en $_[0] modo},
969 m18 => q{Lo siento, el mensaje $_[0] está actualmente marcado como KEEP (Guardarlo)},
970 m19 => q{Fichero de inicio de conexión de $_[0] guardado, contiene $_[1] línea(s)},
971 m20 => q{Fichero de inicio de conexión vacio de $_[0] borrado},
972 msg1 => q{Cola de mensajes tipo Boletín},
973 msg2 => q{Cola de mensajes tipo Privados},
974 msg3 => q{Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]},
975 msgu => q{Uso: msg <cmd> <msgno> data...},
976 merge1 => q{Petición de envío de $_[1] spots y $_[2] WWV enviada a $_[0]},
977 moon => q{QTH dd/mm/yyyy Salida Puesta},
978 moon_with_azel => q{QTH dd/mm/yyyy Salida Puesta Azim Elev', },
979 mond => q{Activado modo monitor},
980 mone => q{Desactivado modo monitor},
982 namee1 => q{Por favor, introduce tu nombre con set/name <tu nombre>},
983 namee2 => q{No se encuentra el usuario $_[0]!},
984 name => q{Tu nombre es "$_[0]"},
985 nodea => q{$_[0] definido como nodo AK1A },
986 nodeac => q{$_[0] creado como nodo AK1A },
987 nodeb => q{$_[0] definido como BBS},
988 nodebc => q{$_[0] creado como BBS},
989 nodec => q{$_[0] definido como nodo CLX },
990 nodecc => q{$_[0] creado como nodo CLX },
991 noder => q{$_[0] definido como nodo AR-Cluster },
992 noderc => q{$_[0] creado como nodo AR-Cluster },
993 nodes => q{$_[0] definido como nodo DXSpider },
994 nodesc => q{$_[0] creado como nodo DXSpider },
995 nodex => q{$_[0] definido como nodo DXNET },
996 nodexc => q{$_[0] creado como nodo DXNET },
997 nodeu => q{$_[0] es ahora un usuario},
998 nodee1 => q{No puedes usar este comando mientras $_[0] se encuentre conectado},
999 notdone => q{No se ha podido realizar la operación},
1000 nothere => q{Lo siento, pero $_[0] no está aquí ahora, inténtalo mas tarde},
1001 obscount => q{El parámetro Ping obsolescence count para $_[0] se ajusta a $_[1]},
1002 ok => q{Operación realizada},
1003 outconn => q{Iniciando conexión con $_[0]},
1004 page => q{Teclea Enter para continuar, A para abortar (Quedan $_[0] líneas) >},
1005 pagelth => q{La longitud de las páginas es ahora de $_[0] línea(s)},
1006 passerr => q{Por favor usa: SET/PASS <password> <indicativo>},
1007 passphrase => q{Passphrase definida o cambiada para $_[0]},
1008 passphraseu => q{Passphrase borrada para $_[0]},
1009 password => q{El Password ha sido definido o cambiado para $_[0]},
1010 passwordu => q{Contraseña borrada para $_[0]},
1011 pc90s => q{PC90 activado para $_[0]},
1012 pc90u => q{PC90 desactivado para $_[0]},
1013 pingo => q{Iniciado el ping a $_[0]},
1014 pingi => q{Ping devuelto por $_[0] en $_[1] (Ave $_[2]) segundos},
1015 pinge1 => q{No puedes enviarte un ping a ti mismo!},
1016 pingint => q{Intervalo de ping para $_[0] ajustado a $_[1] segundos},
1017 'pos' => q{Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]},
1018 prs => q{El Prompt ha sido cambiado},
1019 pru => q{El Prompt vuelve a ser el normal por defecto},
1020 priv => q{Nivel de privilegios modificado para $_[0]},
1021 prx => q{$main::mycall >},
1022 pw0 => q{Escribe el password antiguo: },
1023 pw1 => q{Escribe el nuevo password: },
1024 pw2 => q{Confirma el nuevo password: },
1025 pw3 => q{El Password ha sido cambiado},
1026 pw4 => q{Los passwords no coinciden, NO se han cambiado},
1027 qll => q{Por favor introduce tu locator con set/location o set/qra},
1028 qthe1 => q{Por favor introduce tu QTH, set/qth <tu qth>},
1029 qth => q{Tu QTH es ahora "$_[0]"},
1030 qrae1 => q{Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)},
1031 qrashe1 => q{Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS},
1032 qrae2 => q{No se reconoce "$_[0]" como un QRA locator ( ej JO02LQ)},
1033 qra => q{Tu QRA Locator es ahora "$_[0]"},
1034 qsl1 => q{Indicativo Manager Nº veces Último Spot De},
1035 rcmdo => q{RCMD "$_[0]" enviado a $_[1]},
1036 read1 => q{Lo siento, no hay mensajes nuevos para ti},
1037 read2 => q{Mensaje $_[0] no encontrado},
1038 read3 => q{Mensaje $_[0] no disponible},
1039 rec => q{$_[0] registro(s)},
1040 reg => q{$_[0] registrado},
1041 regc => q{$_[0] creado y registrado},
1042 reginac => q{El registro no está activo (set/var \$main::regreq = 1 para activarlo)},
1043 regun => q{El usuario $_[0] no está registrado},
1044 route => q{$_[0] en $_[1] vía $_[2]},
1045 sat1 => q{Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos},
1046 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
1047 sat3 => q{Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]},
1048 sat4 => q{Satélites disponibles:},
1049 sat5 => q{Es necesario el título nnnn.AMSAT para actualizar datos keps. desde un mensaje},
1050 satnf => q{Satélite $_[0] desconocido},
1051 satdisc => q{-----},
1052 set => q{$_[0] habilitado para $_[1]},
1053 sethop1 => q{Uso: set/hops <indicativo> ann|spots|wwv|wcy <nr de hops>},
1054 sethop2 => q{$_[0] hops set on $_[1]$_[2] para $_[3]},
1055 sethop3 => q{No hay hops definidos para $_[0]},
1056 showconf => q{Nodo Indicativos},
1057 shu => q{"SHU" No es suficiente! Es necesario como mínimo escribir "SHUT" para apagar el cluster},
1058 shutting => q{$main::mycall shutting down...},
1059 sloc => q{Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm},
1060 snode1 => q{Nodo Call Sort Versión},
1061 snode2 => q{$_[0] $_[1] $_[2]},
1062 snode3 => q{$_[0] Indicativo desconocido},
1063 sqra => q{Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm},
1064 sorry => q{Lo siento},
1065 spf1 => q{spoof: creando nuevo usuario $_[0]},
1066 stathf => q{Estadísticas de spots en HF de los últimos $_[1] días desde el $_[0]},
1067 stathft => q{Estadísticas de spots en HF de los últimos $_[2] días desde el $_[1] para DXCC $_[0]},
1068 statvhf => q{VHF + DX Spot Stats, últimos $_[1] días desde el $_[0]},
1069 statvhft => q{VHF + DX Spot Stats, últimos $_[2] días desde el $_[1] para DXCC $_[0]},
1070 statdx => q{Total de Spots de DX en los últimos $_[1] días desde el $_[0]},
1071 storable => q{Por favor, instale el módulo Storable de CPAN'},
1072 sun => q{QTH dd/mm/yyyy Salida Puesta},
1073 sun_with_azel => q{QTH dd/mm/yyyy Salida Puesta Azim Elev},
1074 susdb1 => q{Uso: indicativo estado ciudad},
1075 susdb2 => q{USDB $_[0] era $_[1], $_[2]},
1076 susdb3 => q{USDB $_[0] es ahora $_[1], $_[2]},
1077 susdb4 => q{USDB $_[0] borrado},
1078 suser1 => q{Uso: indicativo user_field_name valor},
1079 suser2 => q{Usuario $_[0] no encontrado},
1080 suser3 => q{User field '$_[0]' era '$_[1]' ahora es '$_[2]'},
1081 suser4 => q{User field name '$_[0]' no existe},
1082 time1 => q{Horario local: $_[0] $_[1], UTC $_[2]},
1083 time2 => q{$_[0] Local (standard) time: $_[1] ($_[2] Horas)},
1084 time3 => q{$_[0] $_[1]},
1085 talks => q{Recepción de mensajes Talk activado para $_[0]},
1086 talku => q{Recepción de mensajes Talk desactivado para $_[0]},
1087 talkend => q{Finalizado modo talk contigo},
1088 talkinst => q{Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando},
1089 talknh => q{Lo siento $_[0] no está conectado en este momento},
1090 talkprompt => q{Talk ($_[0])>},
1091 talkstart => q{Iniciando modo talk contigo},
1092 unset => q{$_[0] desactivado para $_[1]},
1093 unsethop1 => q{Uso: unset/hops <indicativo> ann|spots|wwv|wcy},
1094 unsethop2 => q{Borrados los hops para $_[1] en $_[0]'},
1096 userconn => q{Indicativos conectados a},
1097 usernf => q{*** No se encuentra el registro de usuario de $_[0] ***},
1098 usstates => q{Activada vista del estado USA en spots para $_[0]},
1099 usstateu => q{Desactivada vista del estado USA en spots para $_[0]},
1100 usernf => q{*** Registro de usuario $_[0] no encontrado ***},
1101 wcy1 => q{$_[0] falta o está fuera de rango},
1102 wcy2 => q{WCY Duplicado},
1103 wcy3 => q{Fecha Hora SFI A K Exp.K R SA GMF Aurora Logger},
1104 wcys => q{Activada recepción de anuncios WCY para $_[0]},
1105 wcyu => q{Desactivada recepción de anuncios WWV para $_[0]},
1106 wpc16s => q{Admitir PC16 de $_[0] activado},
1107 wpc16u => q{Admitir PC16 de $_[0] desactivado},
1108 wpc19s => q{Activada ruta PC19 para $_[0]},
1109 wpc19u => q{Desactivada ruta PC19 para $_[0]},
1110 wpc90s => q{PC90 para $_[0] activado},
1111 wpc90u => q{PC90 para $_[0] descativado},
1112 wwv1 => q{$_[0] falta o está fuera de rango},
1113 wwv2 => q{WWV Duplicado},
1114 wwv3 => q{Fecha Hora SFI A K Previsión Logger},
1115 wwvs => q{Activada recepción de anuncios WWV para $_[0]},
1116 wwvu => q{Desactivada recepción de anuncios WWV para $_[0]},
1117 wxs => q{Activada recepción de anuncios WX para $_[0]},
1118 wxu => q{Desactivada recepción de anuncios WX para $_[0]},
1122 addr => q{Adresse gesetzt auf: $_[0]},
1123 already => q{$_[0] bereits verbunden},
1124 anns => q{Announce flag gesetzt auf $_[0]},
1125 annu => q{Announce flag zurueckgesetzt auf $_[0]},
1126 annts => q{AnnTalk flag gesetzt auf $_[0]},
1127 anntu => q{AnnTalk flag zurueckgesetzt auf $_[0]},
1128 badnode1 => q{$_[0] ist nun ein bad node},
1129 badnode2 => q{$_[0] ist nun ein good node},
1130 badnode3 => q{Liste der Bad Nodes:-},
1131 bbse1 => q{Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>},
1132 bbs => q{Deine BBS Adresse ist nun "$_[0]"},
1133 beepoff => q{Beeps sind nun aus},
1134 beepon => q{Beeps sind jetzt eingeschaltet},
1135 call1 => q{Callsign lookup via $_[0]:},
1136 conother => q{Sorry $_[0] Du bist zu diesem Cluster auf einem anderen Port connected},
1137 concluster => q{Sorry $_[0] Du bist schon anderswo mit einem Cluster verbunden (on $_[1])},
1138 conscript => q{Kein connect script mit Namen "$_[0]" gefunden in $main::root/connect},
1139 confail => q{Verbindungsaufbau zu $_[0] misslungen ($_[1])},
1140 constart => q{Verbindungsaufbau zu $_[0] gestartet},
1141 deluser => q{User $_[0] wurde geloescht},
1142 db1 => q{Diese Datenbank ist untergebracht bei $_[0]},
1143 db2 => q{Sorry, aber Schluesselwort: $_[0] wurde nicht gefunden in $_[1]},
1144 db3 => q{Sorry, Datenbank $_[0] existiert hier nicht},
1145 db4 => q{Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online},
1146 db5 => q{Zugriff auf fremde Datenbank bei $_[0]...standby...},
1147 db6 => q{Datenbank $_[0] existiert bereits, bitte zuerst loeschen},
1148 db7 => q{Datenbank $_[0] angelegt fuer remote Cluster $_[1]},
1149 db8 => q{Datenbank $_[0] lokal angelegt},
1150 db9 => q{Datenbank $_[0] entfernt},
1151 db10 => q{$_[0] Datensaetze importiert in $_[1]},
1152 db11 => q{Sende Deine Anfrage(n)an $_[0], bitte stand by...},
1153 db12 => q{DB Name Location Cmd Chain},
1154 dfreq1 => q{Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oder hf/cw},
1155 dir1 => q{Keine Nachricht gefunden},
1156 disc1 => q{Disconnected von $_[0]},
1157 disc2 => q{Kanal $_[0] disconnected},
1158 disc3 => q{Kein Kanal, aber Verbindung $_[0] disconnected},
1159 disc4 => q{Kein Kanal oder Verbindung, aber Waise $_[0] disconnected},
1161 dup => q{Sorry, dies ist ein Duplikat},
1162 dx1 => q{Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar},
1163 dx2 => q{Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar},
1164 dx3 => q{Das Rufzeichen oder Frequenz ist ungueltig},
1165 dxcqs => q{DX CQ Zones aktiviert fuer $_[0]},
1166 dxcqu => q{DX CQ Zones deaktiviert fuer $_[0]},
1167 dxitus => q{DX ITU Zones aktiviert fuer $_[0]},
1168 dxituu => q{DX ITU Zones deaktiviert fuer $_[0]},
1169 dxs => q{DX Spots flag gesetzt auf $_[0]},
1170 dxu => q{DX Spots flag zurueckgesetzt auf $_[0]},
1171 e1 => q{Ungueltiger Befehl},
1172 e2 => q{Fehler: $_[0]},
1173 e3 => q{$_[0]: $_[1] nicht gefunden},
1174 e4 => q{Brauche zumindestens einen Prefix oder ein Rufzeichen},
1175 e5 => q{Nicht erlaubt},
1176 e6 => q{*** Keine Station angegeben ***},
1177 e7 => q{Rufzeichen $_[0] nicht sichtbar im Cluster},
1178 e8 => q{Brauche ein Rufzeichen und etwas Text},
1179 e9 => q{Brauche wenigstens etwas Text},
1180 e10 => q{$_[0] nicht lokal connected},
1181 e11 => q{Kann nicht $main:mein Rufzeichen als Ziel},
1182 e12 => q{Brauche ein Node Rufzeichen},
1183 e13 => q{$_[0] ist kein Node},
1184 e14 => q{Erstes Argument muss eine Zahl und > 0 sein},
1185 e15 => q{Unguelitges Abfragekriterium "$_[0]"},
1186 e16 => q{Datei "$_[0]" existiert},
1187 e17 => q{Bitte gebrauche dieses Wort: @_ nicht hier},
1188 e18 => q{Kann nicht verbinden mit $_[0] ($!)},
1189 e19 => q{Ungueltiger Character in der Zeile $_[0]},
1190 e20 => q{Kuerzel $_[0] nicht erkannt},
1191 e21 => q{$_[0] nicht numerisch},
1192 e22 => q{$_[0] kein Rufzeichen},
1193 e23 => q{$_[0] kein Bereich (z.B. 0/30000)},
1194 e24 => q{Sorry, Internet Zugriff ist nicht freigeschaltet},
1195 e25 => q{Sorry der Wert muss zwischen $_[0] und $_[1] sein},
1196 e26 => q{Zu viele Fehler gleichzeitig, Du wirst disconnected},
1197 e27 => q{$_[0] kein numerisches oder Rufzeichen Prefix},
1198 e28 => q{Sorry, Du musst Dich registrieren (SP $main::myalias to register)},
1199 e29 => q{Brauche eine Passwort},
1200 e30 => q{Kann nicht $_[0] $ oeffnen!},
1201 e31 => q{$_[0] ist kein User'},
1202 e32 => q{Brauche ein Passwort},
1203 e33 => q{$_[0] ist keine Anzahl von Tagen oder ein gueltiges Datum},
1204 e34 => q{Brauche eine GROUP und etwas Text},
1205 e35 => q{Du bist kein Mitglied von $_[0], trete $_[0] bei},
1206 echoon => q{Echo enabled},
1207 echooff => q{Echo disabled},
1208 echow => q{*Echo ist momentan disabled, set/echo zum aktivieren},
1209 emaile1 => q{Bitte E-Mail Addresse eingeben, set/email <Deine e-mail Adresse>},
1210 emaila => q{Deine E-Mail Adresse ist nun "$_[0]"},
1211 email => q{E-mail Adresse gesetzt auf: $_[0]},
1212 export1 => q{Gebrauch: export <msgno> <dateiname>},
1213 export2 => q{$_[3] has error exporting msg $_[0]to $_[1] ($_[2])},
1214 export3 => q{$_[2 ] exportierte msg $_[0] to $_[1]},
1215 filter1 => q{Filter $_[0] upgedated fuer $_[1]},
1216 filter2 => q{Unbekanntes Filter Schluesselwort $_[0]},
1217 filter3 => q{Keine Filter definiert fuer $_[0]},
1218 filter4 => q{$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]},
1219 filter5 => q{brauche ein paar Filter Kommandos...},
1220 filter6 => q{$_[0]$_[1] Filter fuer $[2] nicht gefunden},
1221 grids => q{DX Grid flag gesetzt auf $_[0]},
1222 gridu => q{DX Grid flag zurueckgesetzt auf $_[0]},
1223 illcall => q{Sorry, $_[0] ist ein ungueltiges Rufzeichen},
1224 hasha => q{$_[0] existiert bereits in $_[1]},
1225 hashb => q{$_[0] zugefuegt zu $_[1]},
1226 hashc => q{$_[0] entfernt von $_[1]},
1227 hashd => q{$_[0] nicht in $_[1]},
1228 hashe => q{$_[0] gesetzt auf $_[1]},
1229 helpe1 => q{Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen},
1230 helpe2 => q{Keine Hilfe verfuegbar auf $_[0]},
1231 heres => q{Hier gesetzt auf $_[0]},
1232 heade1 => q{Using $main::mycall Coords, entspricht einem set/location or set/qra},
1233 hereu => q{HERE zurueckgesetzt auf $_[0]},
1234 homebbs => q{Heimat-BBS gesetzt auf: $_[0]},
1235 homenode => q{Heimat-Node gesetzt auf: $_[0]},
1236 hnodee1 => q{Bitte Heimat-Node eingeben, set/homenode <Dein Heimat DX Cluster>},
1237 hnodee2 => q{Heimat-Node setzen ist misslungen $_[0]},
1238 hnode => q{Dein Heimat-Node ist nun "$_[0]"},
1239 init1 => q{Initialisierungs-Nachricht gesendet an $_[0]},
1240 iso => q{$_[0] Isoliert},
1241 isou => q{$_[0] UnIsoliert},
1242 isoc => q{$_[0] erstellt und Isoliert},
1243 isoari => q{Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst},
1244 isoaro => q{Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst},
1245 isow => q{$_[0] ist isoliert; unset/isolate $_[0] zuerst},
1246 join => q{Trete Gespraechsgruppe $_[0] bei},
1247 l1 => q{Sorry $_[0], Du bist bereits auf einem anderen Kanal eingeloggt},
1248 l2 => q{Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build},
1249 lang => q{Sprache ist jetzt Deutsch},
1250 lange1 => q{set/language <lang> wobei <lang> ist eine von ($_[0])},
1251 lange2 => q{Fehler beim Setzen der Sprache auf $_[0]},
1252 lh1 => q{$main::data/hop_table.pl existiert nicht},
1253 loce1 => q{Bitte Deinen Standort eingeben, set/location <latitude longitude>},
1254 loce2 => q{Nicht anerkannt "$_[0]" als Lat/Long (z.B. 52 20 N 0 16 E)},
1255 loce3 => q{$_[0] ist ein QRA Locator, Gebrauch: set/qra $_[0]},
1256 loc => q{Dein Lat/Long ist nun "$_[0]"},
1257 lockout => q{$_[0] ausgesperrt},
1258 lockoutc => q{$_[0] erstellt und ausgesperrt},
1259 lockoutun => q{$_[0] Aussperrung aufgehoben},
1260 lockoutuse => q{Gebrauch: sh/lockout <Rufzeichen>|ALL},
1261 loginu => q{User $_[0] hat eingeloggt},
1262 logoutu => q{User $_[0] hat ausgeloggt},
1263 loginn => q{Node $_[0] hat eingeloggt},
1264 logoutn => q{Node $_[0] hat ausgeloggt},
1265 m1 => q{Betreff eingeben (max. 30 Zeichen):},
1266 m2 => q{Kopie der msg $_[0] gesendet an $_[1]},
1267 m3 => q{Sorry, $_[0] ist keine akzeptable TO Adresse},
1268 m4 => q{Sorry, kann nicht zugreifen auf Nachricht $_[0]},
1269 m5 => q{Sorry, ich brauche eine Nachrichten Nummer},
1270 m6 => q{Reply to: $_[0]},
1271 m7 => q{Betreff : $_[0]},
1272 m8 => q{Nachricht eingeben, /EX zum Absenden oder /ABORT zum Abbrechen},
1273 m9 => q{Neue Nachricht(en) fuer Dich},
1274 m10 => q{Nachricht abgebrochen},
1275 m11 => q{Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]},
1276 m12 => q{Nachricht Nr. $_[0] geloescht},
1277 m13 => q{Nachricht Nr. $_[0] fehlt},
1278 m14 => q{Nachricht Nr. $_[0] markiert als gesendet an $_[1]},
1279 m15 => q{Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]},
1280 m16 => q{Brauche eine Nachrichten-Nummer},
1281 m17 => q{Sorry, kann Nachricht nicht senden im $_[0] Mode},
1282 m18 => q{Sorry, Status von Nachricht Nr. $_[0] ist momentan KEEP},
1283 msg1 => q{Bulletin Nachrichten aufgeschoben},
1284 msg2 => q{Private Nachrichten aufgeschoben},
1285 msg3 => q{Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]},
1286 msgu => q{Gebrauch: msg <cmd> <msgno> data...},
1287 merge1 => q{Merge request fuer $_[1] Spots und $_[2] WWV gesendet an $_[0]},
1288 moon => q{Standort dd/mm/yyyy Rise Set},
1289 moon_with_azel => q{Standort dd/mm/yyyy Rise Set Azim Elev},
1290 mond => q{Ueberwachung Disabled},
1291 mone => q{Ueberwachung Enabled},
1292 namee1 => q{Bitte Deinen Namen eingeben, set/name <Dein Name>},
1293 namee2 => q{Kann User $_[0] nicht finden!},
1294 name => q{Dein Name ist jetzt "$_[0]"},
1295 nodea => q{$_[0] gesetzt als AK1A style Node},
1296 nodeac => q{$_[0] erstellt als AK1A style Node},
1297 nodeb => q{$_[0] gesetzt als BBS},
1298 nodebc => q{$_[0] erstellt als BBS},
1299 nodec => q{$_[0] gesetzt als CLX style Node},
1300 nodecc => q{$_[0] erstellt als CLX style Node},
1301 noder => q{$_[0] gesetzt als AR-Cluster style Node},
1302 noderc => q{$_[0] erstellt als AR-Cluster style Node},
1303 nodes => q{$_[0] gesetzt als DXSpider style Node},
1304 nodesc => q{$_[0] erstellt als DXSpider style Node},
1305 nodex => q{$_[0] gesetzt als DXNET style Node},
1306 nodexc => q{$_[0] erstellt als DXNET style Node},
1307 nodeu => q{$_[0] zurueckgesetzt als ein User},
1308 nodee1 => q{Du kannst dieses Kommando nicht ausfuehren waehrend Dein Ziel ($_[0]) online ist},
1309 notdone => q{Nicht ausgefuehrt},
1310 nothere => q{Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter noch einmal Versuchen},
1311 obscount => q{Ping obsolescence count on $_[0] set to $_[1]},
1312 ok => q{Operation erfolgreich},
1313 outconn => q{Outstanding connect to $_[0]},
1314 page => q{Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >},
1315 pagelth => q{Seitenlaenge ist nun $_[0]},
1316 passerr => q{Gebrauch: SET/PASS <Passwort> <Rufzeichen>},
1317 password => q{Passwort gesetzt oder geaendert fuer $_[0]},
1318 passwordu => q{Passwort geloescht fuer $_[0]},
1319 pingo => q{Ping gestartet nach $_[0]},
1320 pingi => q{Ping erfolgreich zu $_[0] $_[1] (durchschn. $_[2]) Sekunden},
1321 pinge1 => q{Du kannst Dich nicht selber pingen!},
1322 pingint => q{Ping-Intervall zu $_[0] gesetzt auf $_[1] Sekunden},
1323 'pos' => q{Von Rufzeichen: $_[0] Breite: $_[1] Laenge: $_[2]},
1324 prs => q{Prompt gesetzt auf "$_[0]"},
1325 pru => q{Prompt jetzt zurueckgesetzt auf Default-Einstellung},
1326 priv => q{Priviligierten Level geaendert auf $_[0]},
1327 prx => q{$main::mycall >},
1328 pw0 => q{Altes Passwort eingeben: },
1329 pw1 => q{Neues Passwort eingeben: },
1330 pw2 => q{Wiederhole neues Passwort: },
1331 pw3 => q{Passwort geaendert},
1332 pw4 => q{Passwoerter differieren, Passwort NICHT geaendert},
1333 qll => q{Bitte gib Deinen Standort als geograph. Koordinaten mit set/location oder als Maidenhead-Kenner mit set/qra ein},
1334 qthe1 => q{Bitte gib Dein QTH ein mit set/qth <Dein qth>},
1335 qth => q{Dein QTH ist nun "$_[0]"},
1336 qrae1 => q{Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)},
1337 qrashe1 => q{Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS},
1338 qrae2 => q{Erkenne nicht "$_[0]" als einen QRA Locator (z.B. JO02LQ)},
1339 qra => q{Dein QRA Locator ist nun "$_[0]"},
1340 rcmdo => q{RCMD "$_[0]" gesendet an $_[1]},
1341 read1 => q{Sorry, keine neuen Nachrichten fuer Dich},
1342 read2 => q{Msg $_[0] nicht gefunden},
1343 read3 => q{Msg $_[0] nicht verfuegbar},
1344 rec => q{$_[0] records},
1345 reg => q{$_[0] registriert},
1346 regc => q{$_[0] erstellt und registriert},
1347 reginac => q{Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)},
1348 regun => q{$_[0] unregistriert},
1349 route => q{$_[0] auf $_[1] via $_[2]},
1350 sat1 => q{Tracking Tabelle fuer $_[0] fuer die naechsten $_[1] Stunden alle $_[2] mins},
1351 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
1352 sat3 => q{Syntax: SH/SAT <name> [<hours> <interval>]},
1353 sat4 => q{Satelliten verfuegbar:-},
1354 sat5 => q{Brauche nnnnn.AMSAT im Betreff um Keplerelemente von dieser Nachricht zu laden},
1355 satnf => q{Satellit $_[0] unbekannt},
1356 satdisc => q{-----},
1357 sethop1 => q{Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>},
1358 sethop2 => q{$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]},
1359 sethop3 => q{Keine hops gesetzt fuer $_[0]},
1360 shu => q{"SHU" genuegt nicht! Du musst mindestens "SHUT" eingeben, um den Node herunterzufahren},
1361 shutting => q{$main::mycall shutting down...},
1362 sloc => q{Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern},
1363 snode1 => q{Node Call Sort Version},
1364 snode2 => q{$_[0] $_[1] $_[2]},
1365 snode3 => q{$_[0] Unbekanntes Rufzeichen},
1366 sqra => q{Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern},
1368 spf1 => q{spoof: erzeuge neuen User $_[0]},
1369 stathf => q{HF DX Spot Stats, letzte 31 Tage},
1370 stathft => q{HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]},
1371 statvhf => q{VHF+ DX Spot Stats, letzte 31 Tage},
1372 statvhft => q{VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]},
1373 statdx => q{Total DX Spots letzte 31 Tage},
1374 sun => q{Location dd/mm/jjjj Rise Set},
1375 sun_with_azel => q{Location dd/mm/jjjj Rise Set Azim Elev},
1376 suser1 => q{Gebrauch: Rufzeichen user_field_name value},
1377 suser2 => q{User $_[0] nicht gefunden},
1378 suser3 => q{User Feld '$_[0]' war '$_[1]' nun gesetzt auf '$_[2]'},
1379 suser4 => q{User Feld Name '$_[0]' existiert nicht},
1380 time1 => q{Lokala Zeit: $_[0] $_[1], UTC $_[2]},
1381 time2 => q{$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)},
1382 time3 => q{$_[0] $_[1]},
1383 talks => q{Talk flag gesetzt auf $_[0]},
1384 talku => q{Talk flag zurueckgesetzt auf $_[0]},
1385 talkend => q{Beendet Talk zu Dir},
1386 talkinst => q{Talkmode, /EX zum Beenden, /<cmd> um ein Kommando auszufuehren},
1387 talknh => q{Sorry $_[0] ist im moment nicht online},
1388 talkprompt => q{Talk ($_[0])>},
1389 talkstart => q{Startet Talkmode zu Dir},
1390 unset => q{$_[0] deaktiviert fuer $_[1]},
1391 unsethop1 => q{Gebrauch: unset/hops <call> ann|spots|wwv|wcy},
1393 userconn => q{Rufzeichen verbunden mit},
1394 usernf => q{*** User Satz fuer $_[0] nicht gefunden ***},
1395 wwvs => q{WWV flag gesetzt auf $_[0]},
1396 wwvu => q{WWV flag zurueckgesetzt auf $_[0]},
1397 wxs => q{WX flag gesetzt auf $_[0]},
1398 wxu => q{WX flag zurueckgesetzt auf $_[0]},
1401 addr => q{Indirizzo impostato a: $_[0]},
1402 already => q{$_[0] e' connesso},
1403 anns => q{Annunci attivati alle_[0]},
1404 annu => q{Annunci disattivati alle $_[0]},
1405 annts => q{Talk attivato alle $_[0]},
1406 anntu => q{Talk disattivato alle $_[0]},
1407 badnode1 => q{$_[0] e' un nodo disabilitato},
1408 badnode2 => q{$_[0] e' un nodo attivo},
1409 badnode3 => q{Lista dei nodi disabilitati:-},
1410 bbse1 => q{Per favore inserisci l'indirizzo del tuo BBS con set/bbs <tuo bbs>},
1411 bbs => q{Il tuo BBS e' ora "$_[0]"},
1412 beepoff => q{I beep sono disattivati},
1413 beepon => q{I beep sono attivati},
1414 call1 => q{Ricerca del nominativo via $_[0]:},
1415 conother => q{Spiacente $_[0] sei connesso già su un'altra porta},
1416 concluster => q{Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])},
1417 conscript => q{nessuno script di connessione chiamato "$_[0]" trovato in $main::root/connect},
1418 confail => q{connessione a $_[0] fallita ($_[1])},
1419 constart => q{connessione a $_[0] iniziata},
1420 deluser => q{L'utente $_[0] e' stato eliminato},
1421 db1 => q{Questo database e' presso $_[0]},
1422 db2 => q{Spiacente, ma la chiave: $_[0] non e' stata trovata in $_[1]},
1423 db3 => q{Spiacente, il database $_[0] non esiste qui},
1424 db4 => q{Spiacente, il database $_[0] presso $_[1] non e' disponibile al momento},
1425 db5 => q{Sto accedendo al database remoto presso $_[0]...attendere...},
1426 db6 => q{Il database $_[0] esiste già, cancellalo prima},
1427 db7 => q{Il database $_[0] e' stato creato per il nodo remoto $_[1]},
1428 db8 => q{Il database $_[0] e' stato creato localmente},
1429 db9 => q{Il database $_[0] e' stato eliminato},
1430 db10 => q{$_[0] record importati in $_[1]},
1431 db11 => q{Sto inviando le tue richieste a $_[0], attendi...},
1432 dfreq1 => q{Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw'},
1433 dir1 => q{Nessun messaggio trovato},
1434 disc1 => q{Disconnesso da $_[0]},
1435 disc2 => q{Canalew $_[0] disconnesso},
1436 disc3 => q{Nessun canale, ma la connessione $_[0] disconnessa},
1437 disc4 => q{Nessun canale o connessione ma $_[0] disconnesso},
1439 dup => q{Spiacente, questo e' un doppione},
1440 dx1 => q{Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento},
1441 dx2 => q{Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento},
1442 dx3 => q{Il nominativo o la frequenza sono errati},
1443 dxs => q{DX Spots attivati alle $_[0]},
1444 dxu => q{DX Spots disattivati alle $_[0]},
1445 e1 => q{Comando errato},
1446 e2 => q{Errore: $_[0]},
1447 e3 => q{$_[0]: $_[1] non trovato},
1448 e4 => q{Inserire un prefisso o un nominativo},
1449 e5 => q{Non permesso},
1450 e6 => q{*** Nessuna stazione specificata ***},
1451 e7 => q{il nominativo $_[0] non e' visibile sul cluster},
1452 e8 => q{Inserire un nominativo o del testo},
1453 e9 => q{Inserire del testo},
1454 e10 => q{$_[0] non connesso localmente},
1455 e11 => q{Impossibile usare $main:mycall come destinazione},
1456 e12 => q{Inserire il nominativo di un nodo},
1457 e13 => q{$_[0] non e' un nodo},
1458 e14 => q{Il primo argomento deve essere numerico e > 0},
1459 e15 => q{qualificatore non valido "$_[0]"},
1460 e16 => q{Il file "$_[0]" esiste},
1461 e17 => q{Non usare le parole: @_ qui'},
1462 e18 => q{Impossibile connettere $_[0] ($!)},
1463 e19 => q{Carattere non valido nella linea $_[0]},
1464 e20 => q{separatore $_[0] non riconosciuto},
1465 e21 => q{$_[0] non e' numerico},
1466 e22 => q{$_[0] non e' un nominativo},
1467 e23 => q{$_[0] non e' un intervallo (es 0/30000)'},
1468 e24 => q{Spiacente, l'accesso ad internet non e' abilitato},
1469 e25 => q{Spiacente il valore deve essere tra $_[0] e $_[1]},
1470 e26 => q{Troppi errori, stai per essere disconnesso},
1471 e27 => q{$_[0] non e' un prefisso numeroco o di nominativo'},
1472 e28 => q{Spiacente, devi essere registrato (SP $main::myalias per registrarti)},
1473 e29 => q{E' necessaria una password},
1475 echoon => q{Echo abilitato},
1476 echooff => q{Echo disabilitato},
1477 echow => q{*Echo e' al momento disabilitato, usa set/echo per abilitarlo},
1478 emaile1 => q{Per favore inserisci il tuo indirizzo email con: set/email <indirizzo>},
1479 emaila => q{Il tuo indirizzo email e' ora "$_[0]"},
1480 email => q{Indirizzo email impostato a: $_[0]},
1481 export1 => q{sintassi: export <num_mess> <nome_file>},
1482 export2 => q{$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])},
1483 export3 => q{$_[2 ] messaggi esportati da $_[0] a $_[1]},
1484 filter1 => q{Filtro $_[0] aggiornato per $_[1]},
1485 filter2 => q{Chiave sconosciuta per il filtro $_[0]},
1486 filter3 => q{Nessun filtro definito per $_[0]},
1487 filter4 => q{$_[0]$_[1] Filtro $_[2] cancellato per $_[3]},
1488 filter5 => q{necessito qualche comando per i filtri...},
1489 filter6 => q{$_[0]$_[1] Filtro per $[2] non trovato},
1490 grids => q{DX Grid attivato alle $_[0]},
1491 gridu => q{DX Grid disattivato alle $_[0]},
1492 illcall => q{Spiacente, $_[0] non e' un nominativo valido},
1493 hasha => q{$_[0] già esiste $_[1]},
1494 hashb => q{$_[0] aggiunto a $_[1]},
1495 hashc => q{$_[0] rimosso da $_[1]},
1496 hashd => q{$_[0] non in $_[1]'},
1497 hashe => q{$_[0] impostato a $_[1]'},
1498 helpe1 => q{Aiuto non disponibile, contatta il sysop},
1499 helpe2 => q{Nessun aiuto per $_[0]},
1500 heres => q{Here abilitato per $_[0]},
1501 heade1 => q{Sto usando le coordinate $main::mycall, e' preferibile impostarle con set/location o set/qra},
1502 hereu => q{Here disattivato per $_[0]},
1503 homebbs => q{Home BBS impostata a: $_[0]},
1504 homenode => q{Home Node impostato a: $_[0]},
1505 hnodee1 => q{Per piacere imposta il tuo Home Node con set/homenode <nominativo_cluster>},
1506 hnodee2 => q{Impostazione dell'homenode fallita per $_[0]},
1507 hnode => q{Il tuo Homenode e' adesso "$_[0]"},
1508 init1 => q{inizializzaione inviata a $_[0]},
1509 iso => q{$_[0] Isolato},
1510 isou => q{$_[0] non Isolato},
1511 isoc => q{$_[0] creato ed isolato},
1512 isoari => q{c'e' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima},
1513 isoaro => q{c'e' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima},
1514 isow => q{$_[0] e' isolato; unset/isolate $_[0] prima},
1515 l1 => q{Spiacente $_[0], sei già collegato sun un altro canale},
1516 l2 => q{Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build},
1517 lang => q{La lingua selezionata e' adesso Italiano},
1518 lange1 => q{set/language <lingua> dove <lingua> e' una tra ($_[0])},
1519 lange2 => q{impostazione lingua fallita per $_[0]'},
1520 lh1 => q{$main::data/hop_table.pl non esiste},
1521 loce1 => q{Per piacere inserisci la tua posizione, set/location <latitudine longitudine>},
1522 loce2 => q{Non riconosco "$_[0]" come Lat/Long (es 52 20 N 0 16 E)},
1523 loce3 => q{$_[0] e' una locatore QRA, usa: set/qra $_[0]},
1524 loc => q{I tuoi dati Lat/Long sono ora "$_[0]"},
1525 lockout => q{$_[0] Bloccato},
1526 lockoutc => q{$_[0] Creato e bloccato},
1527 lockoutun => q{$_[0] Sbloccato},
1528 lockoutuse => q{sintassi: sh/lockout <nominativo>|ALL},
1529 loginu => q{L'utente $_[0] e' entrato nel cluster},
1530 logoutu => q{L'utente $_[0] e' uscito dal cluster},
1531 loginn => q{Il nodo $_[0] si e' connesso},
1532 logoutn => q{Il nodo $_[0] si e' disconnesso},
1533 m1 => q{Inserisci il Soggetto (30 caratteri):},
1534 m2 => q{Copia del messaggio $_[0] spedita a $_[1]},
1535 m3 => q{Spiacente, $_[0] non e' un destinatario accettabile},
1536 m4 => q{Spiacente, non posso accedere al messaggio $_[0]},
1537 m5 => q{Spiacente, ho bisogno del numero di un messaggio'},
1538 m6 => q{Rispondi a: $_[0]},
1539 m7 => q{Soggetto : $_[0]},
1540 m8 => q{Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire},
1541 m9 => q{Nuovi messaggi sono arrivati per te},
1542 m10 => q{Messaggio abortito},
1543 m11 => q{Il messaggio $_[0] e' stato salvato e inviato a $_[1]},
1544 m12 => q{Il messaggio $_[0] e' stato cancellato},
1545 m13 => q{Il messaggio $_[0] non esiste},
1546 m14 => q{Il messaggio $_[0] e' stato marcato come spedito a $_[1]},
1547 m15 => q{Il messaggio $_[0] risolta ora non spedito a $_[1]},
1548 m16 => q{Specificare il numero del messaggio},
1549 m17 => q{Spiacente, impossibile spedire messaggi in modo $_[0]},
1550 msg1 => q{Bollettino messo in coda},
1551 msg2 => q{Messaggio messo in coda},
1552 msg3 => q{Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]},
1553 msgu => q{sintassi: msg <comando> <num_mess> dati...},
1554 merge1 => q{Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]},
1555 moon => q{Localita gg/mm/aaaa Alba Tramonto},
1556 moon_with_azel => q{Località gg/mm/aaaa Alba Tramonto Azim Elev},
1557 mond => q{Monitor disabilitato},
1558 mone => q{Monitor abilitato},
1559 namee1 => q{Per favore inserisci con set/name <nome>},
1560 namee2 => q{Impossibile trovare l'utente $_[0]!},
1561 name => q{Il tuo nome ora e' "$_[0]"},
1562 nodea => q{$_[0] impostato come nodo stile AK1A},
1563 nodeac => q{$_[0] creato come nodo stile AK1A},
1564 nodeb => q{$_[0] impostato come BBS},
1565 nodebc => q{$_[0] creato come BBS},
1566 nodec => q{$_[0] impostato come nodo stile CLX},
1567 nodecc => q{$_[0] creato come nodo stile CLX},
1568 noder => q{$_[0] impostato come nodo stile AR-Cluster},
1569 noderc => q{$_[0] creato come nodo stile AR-Cluster},
1570 nodes => q{$_[0] impostato come nodo stile DXSpider},
1571 nodesc => q{$_[0] creato come nodo stile DXSpider},
1572 nodex => q{$_[0] impostato come nodo stile DXNET},
1573 nodexc => q{$_[0] creato come nodo stile DXNET},
1574 nodeu => q{$_[0] impostato come utente},
1575 nodee1 => q{Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e' connesso},
1576 notdone => q{Non eseguito},
1577 nothere => q{Spiacente, ma $_[0] non e' presente al momento, prova più tardi'},
1578 obscount => q{Contatore di obsolescenza del ping per $_[0] impostato a $_[1]},
1579 ok => q{Operazione eseguita con successo},
1580 outconn => q{Connessione in corso per $_[0]},
1581 page => q{Premi Invio per continuare, A per annullare ($_[0] linee) >},
1582 pagelth => q{La lunghezza della pagina e' adesso $_[0]},
1583 passerr => q{sintassi: SET/PASS <password> <nominativo>},
1584 password => q{Password impostata o cambiata per $_[0]},
1585 passwordu => q{Password rimossa per $_[0]},
1586 pingo => q{Ping mandato a $_[0]},
1587 pingi => q{Ping ritornato da $_[0] $_[1] (media $_[2]) secondi},
1588 pinge1 => q{Non puoi far un ping su te stesso!},
1589 pingint => q{Intervallo di ping per $_[0] impostato a $_[1] secondi},
1590 'pos' => q{Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]},
1591 priv => q{Privilegi cambiati per $_[0]},
1592 prs => q{Prompt impostato a "$_[0]"},
1593 pru => q{Prompt reimpostato al predefinito},
1594 prx => q{$main::mycall >},
1595 pw0 => q{Inserisci la vecchia password: },
1596 pw1 => q{Inserisci la nuova password: },
1597 pw2 => q{Reinserisci la nuova password: },
1598 pw3 => q{Password modificata},
1599 pw4 => q{Le password sono differenti, password NON cambiata},
1600 qll => q{Per favore inserisci la tua località con set/location o set/qra},
1601 qthe1 => q{Per favore inserisci il tuo QTH con set/qth <qth>},
1602 qth => q{Il tuo QTH e' adesso "$_[0]"},
1603 qrae1 => q{Per favore inserisci il tuo locatore QRA con set/qra <locatore> (es set/qra JM77GF)},
1604 qrashe1 => q{Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS},
1605 qrae2 => q{Non riconosco "$_[0]" come locatore QRA (es JM77GF)},
1606 qra => q{Il tuo locatore QRA e' adesso "$_[0]"},
1607 rcmdo => q{RCMD "$_[0]" spedito a $_[1]},
1608 rec => q{$_[0] records},
1609 read1 => q{Spiacente, non ci sono nuovi messaggi per te},
1610 read2 => q{Messaggio $_[0] non trovato},
1611 read3 => q{Messaggio $_[0] non disponibile},
1612 rec => q{$_[0] records},
1613 reg => q{$_[0] registrato},
1614 regc => q{$_[0] creato e registrato},
1615 reginac => q{La registrazione non e' attiva (set/var \$main::reqreg = 1 per attivarla)},
1616 regun => q{$_[0] deregistrato},
1617 route => q{$_[0] su $_[1] via $_[2]},
1618 sat1 => q{Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins},
1619 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
1620 sat3 => q{Sintassi: SH/SAT <nome> [<ore> <intervallo>]},
1621 sat4 => q{Satelliti disponibili/Età dei Kepleriani (giorni):-},
1622 sat5 => q{serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio},
1623 satnf => q{Satellite $_[0] sconosciuto},
1624 satdisc => q{-----},
1625 sethop1 => q{sintassi: set/hops <nominativo> ann|spots|wwv|wcy <num di salti>},
1626 sethop2 => q{$_[0] salti impostai per $_[1]$_[2] per $_[3]'},
1627 sethop3 => q{Nessun salto impostato per $_[0]'},
1628 shutting => q{$main::mycall si sta arrestando...},
1629 sloc => q{Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm},
1630 snode1 => q{Nodo Nominativo Ordine Versione},
1631 snode2 => q{$_[0] $_[1] $_[2]},
1632 snode3 => q{$_[0] Nominativo sconosciuto},
1633 sqra => q{Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm},
1634 sorry => q{Spiacente},
1635 spf1 => q{spoof: sto creando il nuovo utente $_[0]},
1636 stathf => q{Statistiche HF DX Spot, ultimi 31 giorni},
1637 stathft => q{Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]},
1638 statvhf => q{Statistiche VHF+ DX Spot, ultimi 31 giorni},
1639 statvhft => q{Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]},
1640 statdx => q{Totale DX Spots degli ultimi 31 giorni},
1641 sun => q{Località gg/mm/aaaa Alba Tramonto},
1642 sun_with_azel => q{Località gg/mm/aaaa Alba Tramonto Azim Elev},
1644 suser1 => q{sintassi: nominatio campo_utente valore},
1645 suser2 => q{Utente $_[0] non trovato},
1646 suser3 => q{Il campo utente '$_[0]' era '$_[1]' ora e' impostao a '$_[2]'},
1647 suser4 => q{Il campo utente '$_[0]' non esiste},
1648 time1 => q{Ora locale: $_[0] $_[1], UTC $_[2]},
1649 time2 => q{$_[0] Ora (standard) locale: $_[1] ($_[2] ore)},
1650 time3 => q{$_[0] $_[1]},
1651 talks => q{Talk abilitato per $_[0]},
1652 talku => q{Talk disabilitato per $_[0]},
1653 talkend => q{Chiude il la conversazione con te},
1654 talkinst => q{Stai entrando nel modo conversazione, /EX per uscire, /<cmd> per eseguire un comando},
1655 talknh => q{Spiaente $_[0] non e' collegato al momento},
1656 talkprompt => q{Talk ($_[0])>},
1657 talkstart => q{Inizia una conversazione con te},
1658 unsethop1 => q{sintassi: unset/hops <nominativo> ann|spots|wwv|wcy},
1659 unsethop2 => q{salti eliminati su $_[1] per $_[0]},
1660 usernf => q{*** Record utente per $_[0] non trovato ***},
1661 wcy1 => q{$_[0] manca o e' fuori limite},
1662 wcy2 => q{WCY duplicato},
1663 wwv1 => q{$_[0] manca o e' fuori limite},
1664 wwv2 => q{WWV duplicato},
1665 wwvs => q{WWV abilitati per $_[0]},
1666 wwvu => q{WWV disabilitati per $_[0]},
1667 wxs => q{WX abilitati per $_[0]},
1668 wxu => q{WX disabilitati per $_[0]},
1673 addr => q{Adresa nastavena na: $_[0]},
1674 already => q{$_[0] je uz pripojen},
1675 anns => q{Ann je povolen pro $_[0]},
1676 annu => q{Ann je zakazan pro $_[0]},
1677 annts => q{AnnTalk je povolen pro $_[0]},
1678 anntu => q{AnnTalk je zakazan pro $_[0]},
1679 badnode1 => q{$_[0] je nyni zavadny nod},
1680 badnode2 => q{$_[0] je nyni bezvadny nod},
1681 badnode3 => q{Seznam zavadnych nodu:-},
1682 bbse1 => q{Prosim zadej svou BBS adresu, set/bbs <tva bbs adresa>},
1683 bbs => q{Tva BBS adresa je nyni "$_[0]"},
1684 beepoff => q{Zvuky jsou nyni vypnuty},
1685 beepon => q{Zvuky jsou nyni zapnuty},
1686 call1 => q{Vyhledani znacky pres $_[0]:},
1687 conother => q{Lituji $_[0], jses na me napojen na jinem portu},
1688 concluster => q{Lituji $_[0], jses uz napojen nekde jinde na clusteru (na $_[1])},
1689 conscript => q{nebyl spusten connect skript "$_[0]" nalezen v $main::root/connect},
1690 confail => q{pripojeni na $_[0] selhalo ($_[1])},
1691 constart => q{pripojeni na $_[0] bylo zahajeno},
1692 deluser => q{Uzivatel $_[0] byl smazan},
1693 db1 => q{Tato databaze se nachazi na $_[0]},
1694 db2 => q{Lituji, ale klic $_[0] nebyl nalezen v $_[1]},
1695 db3 => q{Lituji, ale databaze $_[0] se zde nenachazi},
1696 db4 => q{Lituji, databaze $_[0] na $_[1] neni momentalne online},
1697 db5 => q{Pripojuji vzdalenou databazi na $_[0]...cekej...},
1698 db6 => q{Databaze $_[0] uz existuje, nejprve ji smaz},
1699 db7 => q{Databaze $_[0] byla vytvorena pro vzdaleny nod $_[1]},
1700 db8 => q{Databaze $_[0] byla vytvorena lokalne},
1701 db9 => q{Databaze $_[0] byla smazana},
1702 db10 => q{$_[0] zaznamu bylo vlozeno do $_[1]},
1703 db11 => q{Posilam tvuj pozadavek do $_[0], prosim cekej...},
1704 dfreq1 => q{Neplatna freq $_[0], potrebuji napr 0/30000 nebo hf nebo hf/cw'},
1705 dir1 => q{Zadne zpravy nebyly nalezeny},
1706 disc1 => q{Odpojeno uzivatelem $_[0]},
1707 disc2 => q{Kanal $_[0] odpojen},
1708 disc3 => q{Zadny kanal, ale spojeni $_[0] zruseno},
1709 disc4 => q{Zadny kanal ani spojeni, ale $_[0] byl odpojen},
1711 dup => q{Lituji, toto je duplikat},
1712 dx1 => q{Frekvence $_[0] neni uvnitr pasma (viz show/band); pouziti: DX [BY call] freq call text},
1713 dx2 => q{Potrebuji znacku; pouziti: DX [BY call] freq call text},
1714 dx3 => q{Znacka nebo frekvence je neplatna},
1715 dxs => q{DX spoty jsou povoleny pro $_[0]},
1716 dxu => q{DX spoty jsou zakazany pro $_[0]},
1717 e1 => q{Neplatny prikaz},
1718 e2 => q{Chyba: $_[0]},
1719 e3 => q{$_[0]: $_[1] nebylo nalezeno},
1720 e4 => q{Potrebuji alespon prefix nebo znacku},
1721 e5 => q{Neni povoleno},
1722 e6 => q{*** Zadna stanice specifikovana ***},
1723 e7 => q{znacka $_[0] neni v clusteru viditelna},
1724 e8 => q{Potrebuji znacku a nejaky text},
1725 e9 => q{Potrebuji alespon nejaky text},
1726 e10 => q{Stanice $_[0] neni pripojena lokalne},
1727 e11 => q{Nemohu pouzit $main:mycall jako cil},
1728 e12 => q{Potrebuji znacku nodu},
1729 e13 => q{$_[0] neni nod},
1730 e14 => q{Prvni argument musi byt cislo vetsi nez 0},
1731 e15 => q{neplatny parametr "$_[0]"},
1732 e16 => q{Soubor "$_[0]" uz existuje},
1733 e17 => q{Prosim nepouzivej zde toto slovo: @_'},
1734 e18 => q{Nemohu se pripojit na $_[0] ($!)},
1735 e19 => q{neplatny znak v radku $_[0]},
1736 e20 => q{retezec $_0] nebyl rozpoznan},
1737 e21 => q{$_[0] neni cislo},
1738 e22 => q{$_[0] neni znacka},
1739 e23 => q{$_[0] neni v rozsahu (napr 0/30000)'},
1740 e24 => q{Lituji, pristup na internet neni povolen},
1741 e25 => q{Lituji, hodnota musi byt mezi $_[0] a $_[1]},
1742 e26 => q{Prilis mnoho chyb najednou, jsi odpojovan},
1743 e27 => q{$_[0] neni cislo nebo prefix'},
1744 e28 => q{Lituji, musis byt registrovan (SP $main::myalias k registraci)},
1745 e29 => q{Potrebuji heslo},
1746 e30 => q{Nemohu otevrit $_[0] $!},
1747 e31 => q{$_[0] neni uzivatel'},
1748 e32 => q{Potrebuji frazi},
1749 e33 => q{$_[0] neni pocet dnu nebo platne datum},
1751 echoon => q{Echo povoleno},
1752 echooff => q{Echo zakazano},
1753 echow => q{*Echo je momentalne zakazano, pouzij set/echo k povoleni},
1754 emaile1 => q{Prosim zadej svou e-mailovou adresu, set/email <tva emailova adresa>},
1755 emaila => q{Tva e-mailova adresa je nyni "$_[0]"},
1756 email => q{E-mailova adresa je nastavena na: $_[0]},
1757 export1 => q{pouziti: export <cislo zpravy> <soubor>},
1758 export2 => q{$_[3] hlasi chyby pri exportu zpravy $_[0] do $_[1] ($_[2])},
1759 export3 => q{$_[2 ] exportoval zpravu $_[0] to $_[1]},
1760 filter1 => q{Filtr $_[0] byl zmenen pro for $_[1]},
1761 filter2 => q{Neznamy prikaz filtru $_[0]},
1762 filter3 => q{Nejsou zadne definovane filtry pro $_[0]},
1763 filter4 => q{$_[0]$_[1] Filtr $_[2] smazan pro $_[3]},
1764 filter5 => q{potrebuji nejake prikazy filtru...},
1765 filter6 => q{$_[0]$_[1] Filtr pro $[2] nebyl nalezen},
1766 grids => q{QRA ctverec byl povolen pro $_[0]},
1767 gridu => q{QRA ctverec byl zakazan pro $_[0]},
1768 illcall => q{Lituji, $_[0] neni platna znacka},
1769 hasha => q{$_[0] uz existuje v $_[1]},
1770 hashb => q{$_[0] byl pridan do $_[1]},
1771 hashc => q{$_[0] byl odstranen z $_[1]},
1772 hashd => q{$_[0] neni v $_[1]'},
1773 hashe => q{$_[0] byl nastaven v $_[1]'},
1774 helpe1 => q{Systemova napoveda neni k dispozici, informuj sysopa},
1775 helpe2 => q{Napoveda neni k dispozici k $_[0]},
1776 heres => q{$_[0] je pritomen},
1777 heade1 => q{S pouzitim souradnic clusteru, doporucuji zadat set/location nebo set/qra},
1778 hereu => q{$_[0] neni pritomen},
1779 homebbs => q{Domaci BBS je nastavena na: $_[0]},
1780 homenode => q{Domaci DXC nod je nastaven na: $_[0]},
1781 hnodee1 => q{Prosim zadej svuj domaci DXC nod, set/homenode <tvuj domaci DX cluster>},
1782 hnodee2 => q{Nastaveni domaciho nodu na $_[0] selhalo},
1783 hnode => q{Tvuj domaci nod je nyni "$_[0]"},
1784 init1 => q{vyslana inicializacni zprava do $_[0]},
1785 iso => q{$_[0] izolovan},
1786 isou => q{$_[0] neni izolovan},
1787 isoc => q{$_[0] vytvoren a izolovan},
1788 isoari => q{vstupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route input $_[0]},
1789 isoaro => q{vystupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route $_[0]},
1790 isow => q{$_[0] je izolovan; zadej nejprve unset/isolate $_[0]},
1791 l1 => q{Lituji $_[0], uz jsi zalogovan na jinem kanalu},
1792 l2 => q{Ahoj $_[0], toto je $main::mycall, $main::myqth\npouzivajici DXSpider V$main::version build $main::build},
1793 lang => q{Jazyk je nyni nastaven na Cestinu (napoveda zatim v procesu)},
1794 lange1 => q{set/language <lang> kde <lang> je jedno z ($_[0])},
1795 lange2 => q{selhalo nastaveni jazyka na $_[0]'},
1796 lh1 => q{$main::data/hop_table.pl neexistuje},
1797 loce1 => q{Prosim zadej svou polohu, set/location <sirka delka>},
1798 loce2 => q{Nemohu rozpoznat "$_[0]" jako sirka/delka (napr 52 20 N 0 16 E)},
1799 loce3 => q{$_[0] je QRA lokator, prosim pouzij: set/qra $_[0]},
1800 loc => q{Tva poloha (sirka/delka) je nyni "$_[0]"},
1801 lockout => q{$_[0] zamknuto},
1802 lockoutc => q{$_[0] vytvoreno a zamknuto},
1803 lockoutun => q{$_[0] Odemceno},
1804 lockoutuse => q{pouziti: sh/lockout <znacka>|ALL},
1805 loginu => q{Uzivatel $_[0] prihlasen},
1806 logoutu => q{Uzivatel $_[0] odhlasen},
1807 loginn => q{Nod $_[0] prihlasen},
1808 logoutn => q{Nod $_[0] odhlasen},
1809 m1 => q{Zadej nazev (30 znaku):},
1810 m2 => q{Kopie zpravy $_[0] byla odeslana k $_[1]},
1811 m3 => q{Lituji, $_[0] je neplatna cilova adresa},
1812 m4 => q{Lituji, zprava $_[0] neni dostupna},
1813 m5 => q{Lituji, potrebuji cislo zpravy'},
1814 m6 => q{Odpoved na: $_[0]},
1815 m7 => q{Nezev: $_[0]},
1816 m8 => q{Zadej text zpravy /EX pro konec nebo /ABORT k preruseni},
1817 m9 => q{Mas novou zpravu},
1818 m10 => q{Zprava prerusena},
1819 m11 => q{Zprava c. $_[0] ulozena a smerovana na $_[1]},
1820 m12 => q{Zprava c. $_[0] byla smazana},
1821 m13 => q{Zprava c. $_[0] chybi},
1822 m14 => q{Zprava c. $_[0] byla oznacena a zaslana do $_[1]},
1823 m15 => q{Zprava c. $_[0] byla neoznacena a zaslana do $_[1]},
1824 m16 => q{Potrebuji cislo zpravy},
1825 m17 => q{Lituji, nemohu posilat zpravy v modu $_[0]},
1826 m18 => q{Lituji, zprava $_[0] ma momentalne status KEEP},
1827 msg1 => q{Zpravy v rubrikach cekaji ve fronte},
1828 msg2 => q{Privatni zpravy cekaji ve fronte},
1829 msg3 => q{Zprava $_[0]: $_[1] byla zmenena z $_[2] na $_[3]},
1830 msgu => q{pouziti: msg <prikaz> <cislo zpravu> data...},
1831 merge1 => q{Pozadavek na Merge pro $_[1] spotu a $_[2] WWV byl zaslan do $_[0]},
1832 moon => q{Poloha dd/mm/yyyy Vychod Zapad},
1833 moon_with_azel => q{Poloha dd/mm/yyyy Vychod Zapad Azim Elev},
1834 mond => q{Monitoring je zakazan},
1835 mone => q{Monitoring je povolen},
1836 namee1 => q{Prosim zadej sve jmeno, set/name <tve jmeno>},
1837 namee2 => q{Nemohu najit uzivatele $_[0]!},
1838 name => q{Tve jmeno je nyni "$_[0]"},
1839 nodea => q{$_[0] nastaven jako nod typu AK1A},
1840 nodeac => q{$_[0] vytvoren jako nod typu AK1A},
1841 nodeb => q{$_[0] nastaven jako BBS},
1842 nodebc => q{$_[0] vytvoren jako BBS},
1843 nodec => q{$_[0] nastaven jako nod typu CLX},
1844 nodecc => q{$_[0] vytvoren jako nod typu CLX},
1845 noder => q{$_[0] nastaven jako nod typu AR-Cluster},
1846 noderc => q{$_[0] vytvoren jako nod typu AR-Cluster},
1847 nodes => q{$_[0] nastaven jako nod typu DXSpider},
1848 nodesc => q{$_[0] vytvoren jako nod typu DXSpider},
1849 nodex => q{$_[0] nastaven jako nod typu DXNET},
1850 nodexc => q{$_[0] vytvoren jako nod typu DXNET},
1851 nodeu => q{$_[0] nastaven opet jako uzivatel},
1852 nodee1 => q{Nemuzes pouzit tento prikaz zatimco tvuj cil ($_[0]) je on-line},
1853 notdone => q{NEBYLO provedeno},
1854 nothere => q{Lituji, ale $_[0] neni momentalne zde, zkus to pozdeji'},
1855 obscount => q{Pocatecni hodnota Ping citace nodu $_[0] byla nastavena na $_[1]},
1856 ok => q{Operace byla uspesna},
1857 outconn => q{Zbyvajici spojeni na $_[0]},
1858 page => q{Stiskni Enter pro pokracovani, A k preruseni ($_[0] radku) >},
1859 pagelth => q{Delka stranky je nyni $_[0]},
1860 passerr => q{Prosim pouzij: SET/PASS <heslo> <znacka>},
1861 passphrase => q{Fraze byla nastavena nebo zmenena pro $_[0]},
1862 passphraseu => q{Fraze byla odstranena pro $_[0]},
1863 password => q{Heslo bylo nastaveno nebo zmeneno pro $_[0]},
1864 passwordu => q{Heslo bylo odstraneno pro $_[0]},
1865 pc90s => q{PC90 bylo povoleno pro $_[0]},
1866 pc90u => q{PC90 bylo zakazano $_[0]},
1867 pingo => q{Ping byl zaslan na $_[0]},
1868 pingi => q{Ping se vratil od $_[0] $_[1] (Prum $_[2]) sekundy},
1869 pinge1 => q{Nemuzu pingnout sam sebe!},
1870 pingint => q{Ping interval na $_[0] byl nastaven na $_[1] sekundy},
1871 'pos' => q{Od znacky: $_[0] Sirka: $_[1] Delka: $_[2]},
1872 pr2 => q{($_[0]) de $main::mycall $_[1] $_[2] >},
1873 prs => q{Prompt byl nastaven na "$_[0]"},
1874 pru => q{Prompt byl vracen na default},
1875 priv => q{Uroven prav byla zmenena na $_[0]},
1876 prx => q{$main::mycall >},
1877 pw0 => q{Zadej stare heslo: },
1878 pw1 => q{Zadej nove heslo: },
1879 pw2 => q{Zadej znovu nove heslo: },
1880 pw3 => q{Heslo bylo zmeneno},
1881 pw4 => q{Hesla se lisi, heslo NEBYLO zmeneno},
1882 qll => q{Prpsim zadej svou polohu s pomoci set/location nebo set/qra},
1883 qthe1 => q{Prosim zadej sve QTH, set/qth <tve QTH>},
1884 qth => q{Tve QTH je nyni "$_[0]"},
1885 qrae1 => q{Prosim zadej svuj QRA lokator, set/qra <qra lokator> (napr set/qra JN79FM)},
1886 qrashe1 => q{Prosim zadej QRA locator, napr sh/qra JN79FM nebo sh/qra JN79FM JN63GV},
1887 qrae2 => q{Nerozpoznal jsem "$_[0]" jako QRA lokator (napr JN79FM)},
1888 qra => q{Tvuj QRA lokator je nyni "$_[0]"},
1889 rcmdo => q{RCMD "$_[0]" bylo zaslano do $_[1]},
1890 read1 => q{Lituji, nemas zadne nove zpravy},
1891 read2 => q{Zprava $_[0] nenalezena},
1892 read3 => q{Msg $_[0] neni k dispozici},
1893 rec => q{$_[0] zaznamu},
1894 reg => q{$_[0] registrovano},
1895 regc => q{$_[0] vytvoreno a registrovano},
1896 reginac => q{Registrace neni aktivni (set/var \$main::reqreg = 1 k aktivaci)},
1897 regun => q{$_[0] neregistrovano},
1898 route => q{$_[0] na $_[1] via $_[2]},
1899 sat1 => q{Tabulka pro $_[0] pro nasledujicich $_[1] hodin s intervalem $_[2] min},
1900 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Vzdal Km},
1901 sat3 => q{Syntaxe: SH/SAT <jmeno> [<hodin> <interval>]},
1902 sat4 => q{Druzice k dispozici/Stari Kepl. elem (dny):-},
1903 sat5 => q{potrebuji nnnnn.AMSAT v nazvu ke stazeni keps z teto zpravy},
1904 satnf => q{Druzice $_[0] je neznama},
1905 satdisc => q{-----},
1906 set => q{$_[0] povoleno pro $_[1]},
1907 sethop1 => q{pouziti: set/hops <znacka> ann|spots|wwv|wcy <pocet skoku>},
1908 sethop2 => q{$_[0] skoku nastaveno na $_[1]$_[2] pro $_[3]'},
1909 sethop3 => q{Zadny pocet skoku nastaven pro $_[0]'},
1910 shu => q{"SHU" nestaci, je treba alespon "SHUT" k vypnuti nodu},
1911 shutting => q{$main::mycall se vypina...},
1912 sloc => q{Cluster lat $_[0] long $_[1], NEZAPOMEN ZMENIT DXVars.pm},
1913 snode1 => q{Nod Znacka Typ Verze },
1914 snode2 => q{$_[0] $_[1] $_[2]},
1915 snode3 => q{$_[0] Neznama znacka},
1916 sqra => q{Cluster QRA Lokator$_[0], NEZAPOMEN ZMENIT DXVars.pm},
1918 spf1 => q{spoof: vytvarim noveho uzivatele $_[0]},
1919 stathf => q{HF DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]},
1920 stathft => q{HF DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]},
1921 statvhf => q{VHF+ DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]},
1922 statvhft => q{VHF+ DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]},
1923 statdx => q{Prehled DX Spotu pro $_[1] dni pocinaje $_[0]},
1924 sun => q{Poloha dd/mm/yyyy Vychod Zapad},
1925 sun_with_azel => q{Poloha dd/mm/yyyy Vychod Zapad Azim Elev},
1926 susdb1 => q{pouziti: znacka stat mesto},
1927 susdb2 => q{USDB $_[0] bylo $_[1], $_[2]},
1928 susdb3 => q{USDB $_[0] je nyni $_[1], $_[2]},
1929 susdb4 => q{USDB $_[0] smazano},
1930 suser1 => q{pouziti: znacka jmeno_uzivatele hodnota},
1931 suser2 => q{User $_[0] nebylo nalezeno},
1932 suser3 => q{User field '$_[0]' bylo '$_[1]' nyni nastaveno na '$_[2]'},
1933 suser4 => q{Jmeno uzivatele '$_[0]' neexistuje},
1934 time1 => q{Lokalni cas: $_[0] $_[1], UTC $_[2]},
1935 time2 => q{$_[0] Lokalni (standardni) cas: $_[1] ($_[2] hodin)},
1936 time3 => q{$_[0] $_[1]},
1937 talks => q{Talk povolen pro $_[0]},
1938 talku => q{Talk zakazan pro $_[0]},
1939 talkend => q{Skoncil spolecnou konverzaci},
1940 talkinst => q{Vstupuji do konverzacniho modu, /EX pro skonceni, /<paikaz> ke spusteni prikazu},
1941 talknh => q{Lituji, $_[0] neni momentalne online},
1942 talkprompt => q{Talk ($_[0])>},
1943 talkstart => q{Zahajil spolecnou konverzaci},
1944 unset => q{$_[0] zakazano pro for $_[1]},
1945 unsethop1 => q{pouziti: unset/hops <znacka> ann|spots|wwv|wcy},
1946 unsethop2 => q{pocet skoku neni nastaven na $_[1] pro $_[0]'},
1947 usernf => q{*** Uzivatelsky zaznam pro $_[0] nebyl nalezen ***},
1948 wcy1 => q{$_[0] bud chybi nebo je mimo rozsah},
1949 wcy2 => q{Duplicitni WCY},
1950 wcys => q{WCY je povoleno pro $_[0]},
1951 wcyu => q{WCY je zakazano pro $_[0]},
1952 wwv1 => q{$_[0] bud chybi nebo je mimo rozsah},
1953 wwv2 => q{Duplicitni WWV},
1954 wwvs => q{WWV je povoleno pro $_[0]},
1955 wwvu => q{WWV je zakazano pro $_[0]},
1956 wxs => q{WX je povoleno pro $_[0]},
1957 wxu => q{WX je zakazano pro $_[0]},
1961 addr => q{Endereo definido para: $_[0]},
1962 already => q{$_[0] J ligado},
1963 anns => q{Anncios activado para $_[0]},
1964 annu => q{Anncios desactivado para $_[0]},
1965 annts => q{AnnTalk activado para $_[0]},
1966 anntu => q{AnnTalk desactivado para $_[0]},
1967 badnode1 => q{$_[0] agora um node mau},
1968 badnode2 => q{$_[0] agora um bom node},
1969 badnode3 => q{Lista dos maus nodes:-},
1970 bbse1 => q{Por favor escreva qual a sua BBS local,, set/bbs <a sua bbs local>},
1971 bbs => q{A sua bbs local agora "$_[0]"},
1972 beepoff => q{A campainha est desligada agora},
1973 beepon => q{A campainha est ligada agora},
1974 call1 => q{Indicativo fechado via $_[0]:},
1975 conother => q{Desculpe $_[0] voc est ligado a mim noutra porta},
1976 concluster => q{Desculpe $_[0] voc j est ligado em algum sitio no cluster (on $_[1])},
1977 conscript => q{nenhum script de ligao chamado "$_[0]" encontrado em $main::root/connect},
1978 confail => q{ligao para $_[0] falhada ($_[1])},
1979 constart => q{ligao para $_[0] comeada},
1980 deluser => q{User $_[0] foi apagado},
1981 db1 => q{Esta base de dados est localizada em $_[0]},
1982 db2 => q{Desculpe, mas a tecla: $_[0] no foi encontrada em $_[1]},
1983 db3 => q{Desculpe, base de dados $_[0] no\ existe aqui},
1984 db4 => q{Desculp, base de dados $_[0] localizada em $_[1] no\ est actualmente acessivel},
1985 db5 => q{Acedendo a base da dados remota em $_[0]...espere...},
1986 db6 => q{Base de dados $_[0] j existe, apague-a primeiro},
1987 db7 => q{Base de dados $_[0] criada para um node remoto $_[1]},
1988 db8 => q{Base de dados $_[0] criada localmente},
1989 db9 => q{Base de dados $_[0] removida},
1990 db10 => q{$_[0] registos importados para $_[1]},
1991 db11 => q{Enviando o(s) seu(s) pedido(s) para $_[0], por favor espere...},
1992 dfreq1 => q{Freq invlida $_[0] precisa: ex 0/30000 ou hf ou hf/cw'},
1993 dir1 => q{Nenhumas mensagens encontradas},
1994 disc1 => q{Desligado por $_[0]},
1995 disc2 => q{Canal $_[0] desligado},
1996 disc3 => q{Nenhum canal, mas ligao $_[0] desfeita},
1997 disc4 => q{Nenhum canal ou ligao mas orfo $_[0] desligado},
1999 dup => q{Desculpe, isto um duplicado},
2000 dx1 => q{Frequencia $_[0] no em banda (veja show/band); uso: DX [de indicativo] freq call comentrios},
2001 dx2 => q{Preciso de um indicativo; uso: DX [de indicativo] freq call comentrios},
2002 dx3 => q{O indicativo ou frequncia est invlido},
2003 dxcqs => q{DX CQ Zonas activado para $_[0]},
2004 dxcqu => q{DX CQ Zonas desactivada para $_[0]},
2005 dxitus => q{DX ITU Zonas activado para $_[0]},
2006 dxituu => q{DX ITU Zonas desactivada para $_[0]},
2007 dxs => q{DX Spots activado para $_[0]},
2008 dxu => q{DX Spots desactivado $_[0]},
2009 e1 => q{Comando invlido},
2010 e2 => q{Erro: $_[0]},
2011 e3 => q{$_[0]: $_[1] no encontrado},
2012 e4 => q{Preciso de pelo menos dum prefixo ou indicativo},
2013 e5 => q{No permitido},
2014 e6 => q{*** Nenhuma estao especificada ***},
2015 e7 => q{indicativo $_[0] no visivel no cluster},
2016 e8 => q{Preciso de um indicativo e algum texto},
2017 e9 => q{Preciso de pelo menos dalgum texto},
2018 e10 => q{$_[0] no est ligado localmente},
2019 e11 => q{No pode usar $main:mycall como alvo},
2020 e12 => q{Preciso de um indicativo de node},
2021 e13 => q{$_[0] no um node},
2022 e14 => q{O primeiro argumento deve ser numrico e > 0},
2023 e15 => q{qualificador invlido "$_[0]"},
2024 e16 => q{O ficheiro "$_[0]" existe},
2025 e17 => q{Por favor no use as palavras: @_ aqui'},
2026 e18 => q{No posso ligar a $_[0] ($!)},
2027 e19 => q{Caracter invlido na linha $_[0]},
2028 e20 => q{sinal $_[0] no reconhecido},
2029 e21 => q{$_[0] no numrico},
2030 e22 => q{$_[0] no um indicativo},
2031 e23 => q{$_[0] no um intervalo (ex 0/30000)'},
2032 e24 => q{Desculpe, acesso internet no est activado},
2033 e25 => q{Desculpe o valor deve estar entre $_[0] e $_[1]},
2034 e26 => q{Muitos erros concurrenciais, voc vai ser desligado},
2035 e27 => q{$_[0] no um nmero ou um prefixo de um indicativo'},
2036 e28 => q{Desculpe, voc precisa ser registado (SP $main::myalias para registrar)},
2037 e29 => q{Preciso de uma password},
2038 e30 => q{No posso abrir $_[0] $!},
2039 e31 => q{$_[0] no um usurio'},
2040 e32 => q{Preciso de uma passphrase},
2041 e33 => q{$_[0] no um nmero de dias ou uma data vlida},
2042 e34 => q{Preciso de um GRUPO e algum texto},
2043 e35 => q{Voc no um membro de $_[0], junte $_[0]},
2045 echoon => q{Eco activado},
2046 echooff => q{Eco desactivado},
2047 echow => q{*O eco est actualmente desactivado, escreva set/echo para activar},
2048 emaile1 => q{Por favor escreva o seu email, faa set/email <seu email>},
2049 emaila => q{O seu email agora "$_[0]"},
2050 email => q{Email definido para: $_[0]},
2051 export1 => q{uso: export <msgno> <nome de ficheiro>},
2052 export2 => q{$_[3] houve um erro ao exportar a msg $_[0] para $_[1] ($_[2])},
2053 export3 => q{$_[2 ] msg $_[0] exportada para $_[1]},
2054 filter1 => q{Filtro $_[0] actualizado para $_[1]},
2055 filter2 => q{Filtro de palavra chave $_[0] desconhecido},
2056 filter3 => q{Nenhuns filtros definidos para $_[0]},
2057 filter4 => q{$_[0]$_[1] Filtro $_[2] apagado para $_[3]},
2058 filter5 => q{preciso de alguns comandos de filtro...},
2059 filter6 => q{$_[0]$_[1] Filtro para $[2] no encontrado},
2060 grids => q{Grelha de DX activado para $_[0]},
2061 gridu => q{Grelha de DX desactivado para $_[0]},
2062 illcall => q{Desculpe, $_[0] um indicativo invlido},
2063 hasha => q{$_[0] j existe em $_[1]},
2064 hashb => q{$_[0] adicionado para $_[1]},
2065 hashc => q{$_[0] removido de $_[1]},
2066 hashd => q{$_[0] no em $_[1]'},
2067 hashe => q{$_[0] definido em $_[1]'},
2068 helpe1 => q{Sistema de ajuda no disponivel, diga ao sysop},
2069 helpe2 => q{Nenhuma ajuda disponivel em $_[0]},
2070 heres => q{Aqui definido em $_[0]},
2071 heade1 => q{Usando $main::mycall coords, considere fazer um set/location ou set/qra},
2072 hereu => q{Aqui no definido em $_[0]},
2073 homebbs => q{BBS local definida como: $_[0]},
2074 homenode => q{Node local definido como: $_[0]},
2075 hnodee1 => q{Por favor escreva o seu node local, set/homenode <o seu DX Cluster>},
2076 hnodee2 => q{Falha ao definir o node local em $_[0]},
2077 hnode => q{O seu node local agora "$_[0]"},
2078 init1 => q{enviar mensagem de inicializao para $_[0]},
2079 iso => q{$_[0] Isolado},
2080 isou => q{$_[0] No isolado},
2081 isoc => q{$_[0] criado e isolado},
2082 isoari => q{h um filtro de rota entrado para $_[0]; clear/route input $_[0] primeiro},
2083 isoaro => q{h um filtro de rota saido para $_[0]; clear/route $_[0] primeiro},
2084 isow => q{$_[0] est isolado; unset/isolate $_[0] primeiro},
2085 join => q{a juntar ao grupo $_[0]},
2086 l1 => q{Desculpe $_[0], voc est ligado noutro canal},
2087 l2 => q{Ol $_[0], isto $main::mycall em $main::myqth\nrunning DXSpider V$main::version build $main::build},
2088 lang => q{Linguagem agora o Portugus},
2089 lange1 => q{set/language <ling> aonde <ling> uma de ($_[0])},
2090 lange2 => q{falha ao definir uma lngua em $_[0]'},
2091 leave => q{a deixar o grupo $_[0]},
2092 lh1 => q{$main::data/hop_table.pl no existe},
2093 loce1 => q{Por favor diga as suas coordenadas,, set/location <latitude longitude>},
2094 loce2 => q{No reconhece "$_[0]" como uma Lat/Long (ex 52 20 N 0 16 E)},
2095 loce3 => q{$_[0] um locator, por favor use: set/qra $_[0]},
2096 loc => q{A sua lat/long agora "$_[0]"},
2097 lockout => q{$_[0] Fechado},
2098 lockoutc => q{$_[0] Criado e fechado},
2099 lockoutun => q{$_[0] Aberto},
2100 lockoutuse => q{uso: sh/lockout <call>|ALL},
2101 loginu => q{Usurio $_[0] ligou},
2102 logoutu => q{Usurio $_[0] desligou-se},
2103 loginn => q{Node $_[0] ligou},
2104 logoutn => q{Node $_[0] desligou},
2105 m1 => q{Escrever o ttulo (30 caracteres):},
2106 m2 => q{Cpia da msg $_[0] enviada para $_[1]},
2107 m3 => q{Desculpe, $_[0] o endereo inaceitvel},
2108 m4 => q{Desculpe, no pode aceder mensagem $_[0]},
2109 m5 => q{Desculpe, eu preciso do nmero da mensagem'},
2110 m6 => q{Responder a: $_[0]},
2111 m7 => q{Ttulo : $_[0]},
2112 m8 => q{Escrever a mensagem /EX para enviar ou /ABORT para sair},
2113 m9 => q{Uma nova mensagem chegou para si},
2114 m10 => q{Mensagem abortada},
2115 m11 => q{Mensagem nmero $_[0] guardada e enviada para $_[1]},
2116 m12 => q{Mensagem nmero $_[0] apagada},
2117 m13 => q{Mensagem nmero $_[0] desaparecida},
2118 m14 => q{Mensagem nmero $_[0] marcada como enviada para $_[1]},
2119 m15 => q{Mensagem nmero $_[0] desmarcada como enviada para $_[1]},
2120 m16 => q{Preciso do nmero da mensagem},
2121 m17 => q{Desculpe, no posso enviar mensagens no modo $_[0]},
2122 m18 => q{Desculpe, a mensagem $_[0] est actualmente definida como KEEP},
2123 msg1 => q{Filas das mensagens de boletins},
2124 msg2 => q{Filas das mensagens privadas},
2125 msg3 => q{Mensagem $_[0]: $_[1] alterada de $_[2] para $_[3]},
2126 msgu => q{uso: msg <cmd> <msgno> data...},
2127 merge1 => q{Submeter pedido para $_[1] spots e $_[2] WWV enviado para $_[0]},
2128 moon => q{Localizao dd/mm/yyyy Subir Definido},
2129 moon_with_azel => q{Localizao dd/mm/yyyy Subir Definido Azim Elev},
2130 mond => q{Monitorizao desactivada},
2131 mone => q{Monitorizao activada},
2132 namee1 => q{Por favor escreva o seu nome, set/name <o seu nome>},
2133 namee2 => q{No encontro o usurio $_[0]!},
2134 name => q{O seu nome "$_[0]"},
2135 nodea => q{$_[0] definido como um node tipo AK1A},
2136 nodeac => q{$_[0] criado como um node tipo AK1A},
2137 nodeb => q{$_[0] definido como BBS},
2138 nodebc => q{$_[0] criado como BBS},
2139 nodec => q{$_[0] definido como um node tipo CLX},
2140 nodecc => q{$_[0] criado como um node tipo CLX},
2141 noder => q{$_[0] definido como um node tipo AR-Cluster},
2142 noderc => q{$_[0] criado como um node tipo AR-Cluster},
2143 nodes => q{$_[0] definido como um node tipo DXSpider},
2144 nodesc => q{$_[0] criado como um node tipo DXSpider},
2145 nodex => q{$_[0] definido como um node tipo DXNET},
2146 nodexc => q{$_[0] criado como um node tipo DXNET},
2147 nodeu => q{$_[0] definido como um usurio},
2148 nodee1 => q{Voc no pode usar este comando enquanto o seu alvo ($_[0]) est ligado},
2149 notdone => q{No foi feito},
2150 nothere => q{Desculpe, mas $_[0] no est aqui de momento, por favor tente mais tarde'},
2151 obscount => q{Ping obsolescence conta como $_[0] definido para $_[1]},
2152 ok => q{Operao bem sucedida},
2153 outconn => q{Ligao exterior para $_[0]},
2154 page => q{Prima no Enter para continuar, A para abortar ($_[0] linhas) >},
2155 pagelth => q{O tamanho da pgina agora de $_[0]},
2156 passerr => q{Por favor use: SET/PASS <password> <indicativo>},
2157 passphrase => q{Passphrase definida ou alterada por $_[0]},
2158 passphraseu => q{Passphrase removida por $_[0]},
2159 password => q{Password definida ou alterada por $_[0]},
2160 passwordu => q{Password removida por $_[0]},
2161 pc90s => q{PC90 activado por $_[0]},
2162 pc90u => q{PC90 desactivado $_[0]},
2163 pingo => q{Ping comeou para $_[0]},
2164 pingi => q{Ping retornado de $_[0] $_[1] (Ave $_[2]) segundos},
2165 pinge1 => q{No pode fazer ping para si prprio!},
2166 pingint => q{Intervalo de Ping em $_[0] definido para $_[1] segundos},
2167 'pos' => q{Do indicativo: $_[0] Lat: $_[1] Long: $_[2]},
2168 prs => q{Prompt agora definida para "$_[0]"},
2169 pru => q{Prompt agora regressou para a default},
2170 priv => q{Nivel de privilgio alterado em $_[0]},
2171 prx => q{$main::mycall >},
2172 pw0 => q{Escreva a password antiga: },
2173 pw1 => q{Escreva a password nova: },
2174 pw2 => q{Escreva novamente a nova password: },
2175 pw3 => q{Password alterada},
2176 pw4 => q{As Passwordes diferem, a password NO foi alterada},
2177 qll => q{Por favor escreva a sua localizao com set/location ou set/qra},
2178 qthe1 => q{Por favor escreva o seu QTH, set/qth <o seu qth>},
2179 qth => q{O seu QTH "$_[0]"},
2180 qrae1 => q{Por favor escreva o seu locator, set/qra <locator> (ex set/qra IM58LP)},
2181 qrashe1 => q{Por favor escreva o seu locator, ex sh/qra IM58LP ou sh/qra IM58LP IO93NS},
2182 qrae2 => q{No reconhece "$_[0]" como um locator (ex IM58LP)},
2183 qra => q{O seu locator "$_[0]"},
2184 qsl1 => q{Call Manager Times Last Time Seen De},
2185 rcmdo => q{RCMD "$_[0]" enviado para $_[1]},
2186 read1 => q{Desculpe, nenhuma mensagem nova para voc},
2187 read2 => q{Msg $_[0] no foi encontrada},
2188 read3 => q{Msg $_[0] no est disponivel},
2189 rec => q{$_[0] registos},
2190 reg => q{$_[0] registados},
2191 regc => q{$_[0] criado e registado},
2192 reginac => q{O registo no est activo (set/var \$main::reqreg = 1 para activar)},
2193 regun => q{$_[0] no registado},
2194 route => q{$_[0] em $_[1] via $_[2]},
2195 sat1 => q{Tabela de rbitras para $_[0] para a prxima $_[1] horas em todos os $_[2] mins},
2196 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
2197 sat3 => q{Sintaxe: SH/SAT <nome> [<horas> <intervalo>]},
2198 sat4 => q{Satlites disponiveis/Idade das rbitras (dias):-},
2199 sat5 => q{preciso nnnnn.AMSAT no ttulo para carregar as rbitras desde esta mensagem},
2200 satnf => q{Satlite $_[0] desconhecido},
2201 satdisc => q{-----},
2202 set => q{$_[0] activado por $_[1]},
2203 sethop1 => q{uso: set/hops <indicativo> ann|spots|wwv|wcy <nmero de saltos>},
2204 sethop2 => q{$_[0] saltos definidos em $_[1]$_[2] por $_[3]'},
2205 sethop3 => q{Nenhuns saltos definidos por $_[0]'},
2206 shu => q{"SHU" no suficiente! voc precisa pelo menos de "SHUT" para desligar o node},
2207 shutting => q{$main::mycall a desligar...},
2208 sloc => q{Cluster lat $_[0] long $_[1], NO ESQUECER DE ALTERAR O SEU DXVars.pm},
2209 snode1 => q{Node Call Sort Verso},
2210 snode2 => q{$_[0] $_[1] $_[2]},
2211 snode3 => q{$_[0] indicativo desconhecido},
2212 sqra => q{Cluster locator$_[0], NO ESQUECER DE ALTERAR O SEU DXVars.pm},
2213 sorry => q{Desculpe},
2214 spf1 => q{spoof: criando um novo usurio $_[0]},
2215 stathf => q{HF DX Spot Stats, ltimo $_[1] dias de $_[0]},
2216 stathft => q{HF DX Spot Stats, ltimo $_[2] dias de $_[1] por DXCC $_[0]},
2217 statvhf => q{VHF+ DX Spot Stats, ltimo $_[1] dias de $_[0]},
2218 statvhft => q{VHF+ DX Spot Stats, ltimo $_[2] dias de $_[1] por DXCC $_[0]},
2219 statdx => q{Total DX Spots por $_[1] dias de $_[0]},
2220 sun => q{Localizao dd/mm/yyyy Subir Definido},
2221 sun_with_azel => q{Localizao dd/mm/yyyy Subir Definido Azim Elev},
2222 susdb1 => q{uso: indicativo da cidade do estado},
2223 susdb2 => q{USDB $_[0] foi $_[1], $_[2]},
2224 susdb3 => q{USDB $_[0] agora $_[1], $_[2]},
2225 susdb4 => q{USDB $_[0] apagado},
2226 suser1 => q{uso: indicativo valor user_field_name},
2227 suser2 => q{Usurio $_[0] no foi encontrado},
2228 suser3 => q{Campo do usurio '$_[0]' fooi '$_[1]' agora definido para '$_[2]'},
2229 suser4 => q{O campo de nome do usurio '$_[0]' no existe},
2230 time1 => q{Tempo local: $_[0] $_[1], UTC $_[2]},
2231 time2 => q{$_[0] Tempo local (standard): $_[1] ($_[2] Horas)},
2232 time3 => q{$_[0] $_[1]},
2233 talks => q{QSO activado por $_[0]},
2234 talku => q{QSO desactivado por $_[0]},
2235 talkend => q{Conversao acabada para si},
2236 talkinst => q{A entrar no mode de conversao, /EX para terminar, /<cmd> para correr como um comando},
2237 talknh => q{Desculpe $_[0] no est ligado de momento},
2238 talkprompt => q{Conversar ($_[0])>},
2239 talkstart => q{A comear a conversao para si},
2240 unset => q{$_[0] desactivado por $_[1]},
2241 unsethop1 => q{uso: unset/hops <indicativo> ann|spots|wwv|wcy},
2242 unsethop2 => q{saltos no definidos em $_[1] por $_[0]'},
2243 usernf => q{*** Registo de usurio por $_[0] no foi encontrado ***},
2244 usstates => q{Mostrar estados dos EUA activado por $_[0]},
2245 usstateu => q{Desactivar os estados dos EUA por $_[0]},
2246 wcy1 => q{$_[0] est desaparecido ou fora de alcance},
2247 wcy2 => q{WCY duplicado},
2248 wcys => q{WCY enabled for $_[0]},
2249 wcyu => q{WCY desactivado por $_[0]},
2250 wpc16s => q{Permite o PC16 de $_[0] activado},
2251 wpc16u => q{Permite o PC16 de $_[0] desactivado},
2252 wpc19s => q{Rota PC19 por $_[0] activado},
2253 wpc19u => q{Rota PC19 por $_[0] desactivado},
2254 wwv1 => q{$_[0] est desaparecido ou fora de alcance},
2255 wwv2 => q{WWV duplicado},
2256 wwvs => q{WWV activado por $_[0]},
2257 wwvu => q{WWV desactivado $_[0]},
2258 wxs => q{WX activado por $_[0]},
2259 wxu => q{WX desactivado por $_[0]},
projects / spider.git / blob