From ded9826c433e14be019cb8713ebfb5a7ff65ea13 Mon Sep 17 00:00:00 2001 From: g0vgs Date: Sun, 23 Feb 2003 07:41:03 +0000 Subject: [PATCH] Add new commands to manuals --- Changes | 1 + html/adminmanual_en-11.html | 224 +++++++++-------- html/adminmanual_en.html | 206 +++++++-------- html/usermanual_en-12.html | 177 ++++++++----- html/usermanual_en.html | 142 ++++++----- sgml/adminmanual_en.sgml | 55 ++++ sgml/installation.sgml | 2 +- sgml/usermanual_en.sgml | 55 ++++ txt/adminmanual_en.txt | 489 +++++++++++++++++++----------------- txt/usermanual_en.txt | 462 +++++++++++++++++++--------------- 10 files changed, 1037 insertions(+), 776 deletions(-) diff --git a/Changes b/Changes index c44c9cc2..e85c6748 100644 --- a/Changes +++ b/Changes @@ -1,6 +1,7 @@ 23Feb03======================================================================= 1. Added show/wm7d command (a US only callbook server) [by K1XX]. 2. Added a prototype show/db0sdx command (w.i.p). +3. Add new Commands to manuals (g0vgs) 22Feb03======================================================================= 1. changed qrz.com address 2. added Charlie's [K1XX] new wpxloc.raw data stuff to get WA1, KC3 type diff --git a/html/adminmanual_en-11.html b/html/adminmanual_en-11.html index 48ec68b6..a4fa0fcd 100644 --- a/html/adminmanual_en-11.html +++ b/html/adminmanual_en-11.html @@ -1058,22 +1058,27 @@ This will show YOU the output from SH/VHFTABLE and also store it in themessage.

set/dxnet <call> [<call>..] Make the callsign an DXNet node

-

11.105 set/echo (0) +

11.105 set/dxstate (0) +

+ +

set/dxstate Allow US State info on the end of DX announcements

+ +

11.106 set/echo (0)

set/echo Make the cluster echo your input

-

11.106 set/email <email> ... (0) +

11.107 set/email <email> ... (0)

set/email <email> ... Set email address(es) and forward your personals

-

11.107 set/here (0) +

11.108 set/here (0)

set/here Tell the system you are present at your terminal

-

11.108 set/homenode <node> (0) +

11.109 set/homenode <node> (0)

set/homenode <node> Set your normal cluster callsign

@@ -1084,27 +1089,27 @@ This will show YOU the output from SH/VHFTABLE and also store it in themessage.

-

11.109 set/hops <call> ann|spots|route|wwv|wcy <n> (8) +

11.110 set/hops <call> ann|spots|route|wwv|wcy <n> (8)

set/hops <call> ann|spots|route|wwv|wcy <n> Set hop count

-

11.110 set/language <lang> (0) +

11.111 set/language <lang> (0)

set/language <lang> Set the language you want to use

You can select the language that you want the cluster to use. Currentlythe languages available are en (English), de (German), es (Spanish) and nl (Dutch).

-

11.111 set/location <lat & long> (0) +

11.112 set/location <lat & long> (0)

set/location <lat & long> Set your latitude and longitude

-

11.112 set/logininfo (0) +

11.113 set/logininfo (0)

set/logininfo Inform when a station logs in locally

-

11.113 set/name <your name> (0) +

11.114 set/name <your name> (0)

set/name <your name> Set your name

@@ -1115,17 +1120,17 @@ This will show YOU the output from SH/VHFTABLE and also store it in themessage.

-

11.114 set/node <call> [<call>..] (5) +

11.115 set/node <call> [<call>..] (5)

set/node <call> [<call>..] Make the callsign an AK1A cluster

Tell the system that the call(s) are to be treated as AK1A cluster andfed PC Protocol rather normal user commands.

-

11.115 set/obscount <count> <call> (8) +

11.116 set/obscount <count> <call> (8)

set/obscount <count> <call> Set the 'pump-up' obscelence PING counter

From 1.35 onwards neighbouring nodes are pinged at regular intervals (seeSET/PINGINTERVAL), usually 300 seconds or 5 minutes. There is a 'pump-up'counter which is decremented on every outgoing ping and then reset tothe 'obscount' value on every incoming ping. The default value of thisparameter is 2. What this means is that a neighbouring node will be pinged twice at (default) 300 second intervals and if no reply has been heard just beforewhat would be the third attempt, that node is disconnected.If a ping is heard then the obscount is reset to the full value. Usingdefault values, if a node has not responded to a ping within 15 minutes,it is disconnected.You can set this parameter between 1 and 9.It is STRONGLY recommended that you don't change the default.

-

11.116 set/page <lines per page> (0) +

11.117 set/page <lines per page> (0)

set/page <lines per page> Set the lines per page

@@ -1136,17 +1141,17 @@ This will show YOU the output from SH/VHFTABLE and also store it in themessage. The setting is stored in your user profile.

-

11.117 set/password (0) +

11.118 set/password (0)

set/password Set your own password

This command only works for a 'telnet' user (currently). It willonly work if you have a password already set. This initial passwordcan only be set by the sysop.When you execute this command it will ask you for your old password,then ask you to type in your new password twice (to make sure youget it right). You may or may not see the data echoed on the screenas you type, depending on the type of telnet client you have.

-

11.118 set/prompt <string> (0) +

11.119 set/prompt <string> (0)

set/prompt <string> Set your prompt to <string>

-

11.119 set/qra <locator> (0) +

11.120 set/qra <locator> (0)

set/qra <locator> Set your QRA Grid locator

@@ -1157,7 +1162,7 @@ The setting is stored in your user profile.

-

11.120 set/qth <your qth> (0) +

11.121 set/qth <your qth> (0)

set/qth <your qth> Set your QTH

@@ -1168,52 +1173,52 @@ The setting is stored in your user profile.

-

11.121 set/spider <call> [<call>..] (5) +

11.122 set/spider <call> [<call>..] (5)

set/spider <call> [<call>..] Make the callsign an DXSpider node

Tell the system that the call(s) are to be treated as DXSpider node andfed new style DX Protocol rather normal user commands.

-

11.122 set/talk (0) +

11.123 set/talk (0)

set/talk Allow TALK messages to come out on your terminal

-

11.123 set/wcy (0) +

11.124 set/wcy (0)

set/wcy Allow WCY messages to come out on your terminal

-

11.124 set/wwv (0) +

11.125 set/wwv (0)

set/wwv Allow WWV messages to come out on your terminal

-

11.125 set/wx (0) +

11.126 set/wx (0)

set/wx Allow WX messages to come out on your terminal

-

11.126 show/baddx (1) +

11.127 show/baddx (1)

show/baddx Show all the bad dx calls in the system

Display all the bad dx callsigns in the system, see SET/BADDXfor more information.

-

11.127 show/badnode (1) +

11.128 show/badnode (1)

show/badnode Show all the bad nodes in the system

Display all the bad node callsigns in the system, see SET/BADNODEfor more information.

-

11.128 show/badspotter (1) +

11.129 show/badspotter (1)

show/badspotter Show all the bad spotters in the system

Display all the bad spotter's callsigns in the system, see SET/BADSPOTTERfor more information.

-

11.129 show/badword (1) +

11.130 show/badword (1)

show/badword Show all the bad words in the system

Display all the bad words in the system, see SET/BADWORDfor more information.

-

11.130 show/configuration [<node>] (0) +

11.131 show/configuration [<node>] (0)

show/configuration [<node>] Show all the nodes and users visible

@@ -1235,22 +1240,27 @@ will produce a complete list of all nodes. BE WARNED: the list that is returned

-

11.131 show/configuration/node (0) +

11.132 show/configuration/node (0)

show/configuration/node Show all the nodes connected locally

Show all the nodes connected to this node.

-

11.132 show/connect (1) +

11.133 show/connect (1)

show/connect Show all the active connections

This command shows information on all the active connections known tothe node. This command gives slightly more information than WHO.

-

11.133 show/date [<prefix>|<callsign>] (0) +

11.134 show/date [<prefix>|<callsign>] (0)

show/date [<prefix>|<callsign>] Show the local time

This is very nearly the same as SHOW/TIME, the only difference the formatof the date string if no arguments are given.If no prefixes or callsigns are given then this command returns the localtime and UTC as the computer has it right now. If you give some prefixesthen it will show UTC and UTC + the local offset (not including DST) atthe prefixes or callsigns that you specify.

-

11.134 show/dx (0) +

11.135 show/db0sdx <callsign> (0) +

+ +

show/db0sdx <callsign> Show QSL infomation from DB0SDX database

+

This command queries the DB0SDX QSL server on the internetand returns any information available for that callsign. This serviceis provided for users of this software by http://www.qslinfo.de.See also SHOW/QRZ, SHOW/WM7D.

+

11.136 show/dx (0)

show/dx Interrogate the spot database

@@ -1321,7 +1331,7 @@ will produce a complete list of all nodes. BE WARNED: the list that is returned

-

11.135 show/dxcc <prefix> (0) +

11.137 show/dxcc <prefix> (0)

show/dxcc <prefix> Interrogate the spot database by country

@@ -1338,12 +1348,12 @@ This can be done with the SHOW/DX command like this:-

-

11.136 show/dxstats [days] [date] (0) +

11.138 show/dxstats [days] [date] (0)

show/dxstats [days] [date] Show the DX Statistics

Show the total DX spots for the last <days> no of days (default is 31), starting from a <date> (default: today).

-

11.137 show/files [<filearea> [<string>]] (0) +

11.139 show/files [<filearea> [<string>]] (0)

show/files [<filearea> [<string>]] List the contents of a filearea

@@ -1360,17 +1370,17 @@ where <filearea> is the name of the filearea you want to see the contents See also TYPE - to see the contents of a file.

-

11.138 show/filter (0) +

11.140 show/filter (0)

show/filter Show the contents of all the filters you have set

Show the contents of all the filters that are set. This command displaysall the filters set - for all the various categories.

-

11.139 show/hfstats [days] [date] (0) +

11.141 show/hfstats [days] [date] (0)

show/hfstats [days] [date] Show the HF DX Statistics

Show the HF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a <date> (default: today).

-

11.140 show/hftable [days] [date] [prefix ...] (0) +

11.142 show/hftable [days] [date] [prefix ...] (0)

show/hftable [days] [date] [prefix ...] Show the HF DX Spotter Table

@@ -1399,22 +1409,22 @@ This will show the stats for your DXCC for that CQWW contest weekend. You can sp

-

11.141 show/hops <call> [ann|spots|route|wcy|wwv] (8) +

11.143 show/hops <call> [ann|spots|route|wcy|wwv] (8)

show/hops <call> [ann|spots|route|wcy|wwv] Show the hop counts for a node

This command shows the hop counts set up for a node. You can specifywhich category you want to see. If you leave the category out then all the categories will be listed.

-

11.142 show/isolate (1) +

11.144 show/isolate (1)

show/isolate Show list of ISOLATED nodes

-

11.143 show/log [<callsign>] (8) +

11.145 show/log [<callsign>] (8)

show/log [<callsign>] Show excerpts from the system log

This command outputs a short section of the system log. On its ownit will output a general logfile. With the optional callsign it willshow output from the log associated with that callsign.

-

11.144 show/moon [ndays] [<prefix>|<callsign>] (0) +

11.146 show/moon [ndays] [<prefix>|<callsign>] (0)

show/moon [ndays] [<prefix>|<callsign>] Show Moon rise and set times

@@ -1437,7 +1447,7 @@ or in three days time:- Upto 366 days can be checked both in the past and in the future.Please note that the rise and set times are given as the UT times of rise and set on the requested UT day.

-

11.145 show/muf <prefix> [<hours>][long] (0) +

11.147 show/muf <prefix> [<hours>][long] (0)

show/muf <prefix> [<hours>][long] Show the likely propagation to a prefix

@@ -1466,32 +1476,32 @@ will get you the above display, but with the next 24 hours worth ofpropagation d Gives you an estimate of the long path propagation characterics. Itshould be noted that the figures will probably not be very useful, norterrible accurate, but it is included for completeness.

-

11.146 show/newconfiguration [<node>] (0) +

11.148 show/newconfiguration [<node>] (0)

show/newconfiguration [<node>] Show all the nodes and users visible

This command allows you to see all the users that can be seenand the nodes to which they are connected. This command produces essentially the same information as SHOW/CONFIGURATION except that it shows all the duplication ofany routes that might be present It also uses a different formatwhich may not take up quite as much space if you don't have anyloops.BE WARNED: the list that is returned can be VERY long

-

11.147 show/newconfiguration/node (0) +

11.149 show/newconfiguration/node (0)

show/newconfiguration/node Show all the nodes connected locally

Show all the nodes connected to this node in the new format.

-

11.148 show/node [<callsign> ...] (1) +

11.150 show/node [<callsign> ...] (1)

show/node [<callsign> ...] Show the type and version number of nodes

Show the type and version (if connected) of the nodes specified on thecommand line. If no callsigns are specified then a sorted list of allthe non-user callsigns known to the system will be displayed.

-

11.149 show/prefix <callsign> (0) +

11.151 show/prefix <callsign> (0)

show/prefix <callsign> Interrogate the prefix database

This command takes the <callsign> (which can be a full or partial callsign or a prefix), looks up which internal country number it is and then displays all the relevant prefixes for that countrytogether with the internal country no, the CQ and ITU regions. See also SHOW/DXCC

-

11.150 show/program (5) +

11.152 show/program (5)

show/program Show the locations of all the included program modules

Show the name and location where every program module was load from. Thisis useful for checking where you think you have loaded a .pm file from.

-

11.151 show/qra <lat> <long> (0) +

11.153 show/qra <lat> <long> (0)

show/qra <lat> <long> Convert lat/long to a QRA Grid locator

@@ -1508,17 +1518,17 @@ The first example will show the distance and bearing to the locator fromyourself

-

11.152 show/qra <locator> [<locator>] (0) +

11.154 show/qra <locator> [<locator>] (0)

show/qra <locator> [<locator>] Show distance between QRA Grid locators

-

11.153 show/qrz <callsign> (0) +

11.155 show/qrz <callsign> (0)

show/qrz <callsign> Show any callbook details on a callsign

-

This command queries the QRZ callbook server on the internetand returns any information available for that callsign. This serviceis provided for users of this software by http://www.qrz.com

-

11.154 show/route <callsign> ... (0) +

This command queries the QRZ callbook server on the internetand returns any information available for that callsign. This serviceis provided for users of this software by http://www.qrz.com See also SHOW/WM7D for an alternative.

+

11.156 show/route <callsign> ... (0)

show/route <callsign> ... Show the route to the callsign

@@ -1529,7 +1539,7 @@ The first example will show the distance and bearing to the locator fromyourself

-

11.155 show/satellite <name> [<hours> <interval>] (0) +

11.157 show/satellite <name> [<hours> <interval>] (0)

show/satellite <name> [<hours> <interval>] Show tracking data

@@ -1540,12 +1550,12 @@ The first example will show the distance and bearing to the locator fromyourself

-

11.156 show/station all [<regex>] (6) +

11.158 show/station all [<regex>] (6)

show/station all [<regex>] Show list of users in the system

-

11.157 show/station [<callsign> ..] (0) +

11.159 show/station [<callsign> ..] (0)

show/station [<callsign> ..] Show information about a callsign

@@ -1556,7 +1566,7 @@ The first example will show the distance and bearing to the locator fromyourself If no callsign is given then show the information for yourself.

-

11.158 show/sun [ndays] [<prefix>|<callsign>] (0) +

11.160 show/sun [ndays] [<prefix>|<callsign>] (0)

show/sun [ndays] [<prefix>|<callsign>] Show sun rise and set times

@@ -1579,12 +1589,12 @@ or in three days time:- Upto 366 days can be checked both in the past and in the future.Please note that the rise and set times are given as the UT times of rise and set on the requested UT day.

-

11.159 show/time [<prefix>|<callsign>] (0) +

11.161 show/time [<prefix>|<callsign>] (0)

show/time [<prefix>|<callsign>] Show the local time

If no prefixes or callsigns are given then this command returns the localtime and UTC as the computer has it right now. If you give some prefixesthen it will show UTC and UTC + the local offset (not including DST) atthe prefixes or callsigns that you specify.

-

11.160 show/usdb [call ..] (0) +

11.162 show/usdb [call ..] (0)

show/usdb [call ..] Show information held on the FCC Call database

@@ -1595,12 +1605,12 @@ Upto 366 days can be checked both in the past and in the future.Please note that

-

11.161 show/vhfstats [days] [date] (0) +

11.163 show/vhfstats [days] [date] (0)

show/vhfstats [days] [date] Show the VHF DX Statistics

Show the VHF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a date (default: today).

-

11.162 show/vhftable [days] [date] [prefix ...] (0) +

11.164 show/vhftable [days] [date] [prefix ...] (0)

show/vhftable [days] [date] [prefix ...] Show the VHF DX Spotter Table

@@ -1629,77 +1639,82 @@ This will show the stats for your DXCC for that CQWW contest weekend. You can sp

-

11.163 show/wcy (0) +

11.165 show/wcy (0)

show/wcy Show last 10 WCY broadcasts

-

11.164 show/wcy <n> (0) +

11.166 show/wcy <n> (0)

show/wcy <n> Show last <n> WCY broadcasts

Display the most recent WCY information that has been received by the system

-

11.165 show/wwv (0) +

11.167 show/wm7d <callsign> (0) +

+ +

show/wm7d <callsign> Show callbook details on a US callsigns

+

This command queries the WM7D callbook server on the internetand returns any information available for that US callsign. This serviceis provided for users of this software by http://www.wm7d.net.See also SHOW/QRZ.

+

11.168 show/wwv (0)

show/wwv Show last 10 WWV broadcasts

-

11.166 show/wwv <n> (0) +

11.169 show/wwv <n> (0)

show/wwv <n> Show last <n> WWV broadcasts

Display the most recent WWV information that has been received by the system

-

11.167 shutdown (5) +

11.170 shutdown (5)

shutdown Shutdown the cluster

Shutdown the cluster and disconnect all the users

-

11.168 stat/channel [<callsign>] (5) +

11.171 stat/channel [<callsign>] (5)

stat/channel [<callsign>] Show the status of a channel on the cluster

Show the internal status of the channel object either for the channel that you are on or else for the callsign that you asked for.Only the fields that are defined (in perl term) will be displayed.

-

11.169 stat/db <dbname> (5) +

11.172 stat/db <dbname> (5)

stat/db <dbname> Show the status of a database

Show the internal status of a database descriptor.Depending on your privilege level you will see more or less information. This command is unlikely to be of much use to anyone other than a sysop.

-

11.170 stat/msg (1) +

11.173 stat/msg (1)

stat/msg Show the status of the message system

-

11.171 stat/msg <msgno> (1) +

11.174 stat/msg <msgno> (1)

stat/msg <msgno> Show the status of a message

This command shows the internal status of a message and includes informationsuch as to whom it has been forwarded, its size, origin etc etc.If no message number is given then the status of the message system is displayed.

-

11.172 stat/route_node <callsign> (5) +

11.175 stat/route_node <callsign> (5)

stat/route_node <callsign> Show the data in a Route::Node object

-

11.173 stat/route_node all (5) +

11.176 stat/route_node all (5)

stat/route_node all Show list of all Route::Node objects

-

11.174 stat/route_user <callsign> (5) +

11.177 stat/route_user <callsign> (5)

stat/route_user <callsign> Show the data in a Route::User object

-

11.175 stat/route_user all (5) +

11.178 stat/route_user all (5)

stat/route_user all Show list of all Route::User objects

-

11.176 stat/user [<callsign>] (5) +

11.179 stat/user [<callsign>] (5)

stat/user [<callsign>] Show the full status of a user

Shows the full contents of a user record including all the secret flagsand stuff.Only the fields that are defined (in perl term) will be displayed.

-

11.177 sysop (0) +

11.180 sysop (0)

sysop Regain your privileges if you login remotely

@@ -1716,7 +1731,7 @@ you type:- They will all match. If there is no password you will still be offerednumbers but nothing will happen when you input a string. Any match iscase sensitive.

-

11.178 talk <call> > <node> [<text>] (0) +

11.181 talk <call> > <node> [<text>] (0)

talk <call> > <node> [<text>] Send a text message to another station via a node

@@ -1739,12 +1754,12 @@ If you are in 'Talk' mode, there is an extention to the '/' command whichallows will send the hftable as you have it to all the people you are currently talking to.

-

11.179 talk <call> [<text>] (0) +

11.182 talk <call> [<text>] (0)

talk <call> [<text>] Send a text message to another station

-

11.180 type <filearea>/<name> (0) +

11.183 type <filearea>/<name> (0)

type <filearea>/<name> Look at the contents of a file in one of the fileareas

@@ -1755,7 +1770,7 @@ will send the hftable as you have it to all the people you are currently talking See also SHOW/FILES to see what fileareas are available and a list of content.

-

11.181 uncatchup <node call> all|[msgno> ...] (5) +

11.184 uncatchup <node call> all|[msgno> ...] (5)

uncatchup <node call> all|[msgno> ...] Unmark a message as sent

@@ -1772,12 +1787,12 @@ and to undo what you have just done:- which will arrange for them to be forward candidates again.Order is not important.

-

11.182 unset/announce (0) +

11.185 unset/announce (0)

unset/announce Stop announce messages coming out on your terminal

-

11.183 unset/anntalk (0) +

11.186 unset/anntalk (0)

unset/anntalk Stop talk like announce messages on your terminal

@@ -1794,7 +1809,7 @@ you will suppress several of these announces, you may miss the odd useful one as allows you to see them again. This is the default.

-

11.184 unset/baddx <call>.. (8) +

11.187 unset/baddx <call>.. (8)

unset/baddx <call>.. Propagate a dx spot with this callsign again

@@ -1811,7 +1826,7 @@ To allow a word again, use the following command ...

-

11.185 unset/badnode <call>.. (8) +

11.188 unset/badnode <call>.. (8)

unset/badnode <call>.. Allow spots from this node again

@@ -1828,7 +1843,7 @@ will stop anything from K1TTT. If you want SSIDs as well then you mustenter them will allow spots from him again.Use with extreme care. This command may well be superceeded by FILTERing.

-

11.186 unset/badspotter <call>.. (8) +

11.189 unset/badspotter <call>.. (8)

unset/badspotter <call>.. Allow spots from this callsign again

@@ -1845,7 +1860,7 @@ will stop anything from VE2STN. This command will automaticallystop spots from t will allow spots from him again.Use with extreme care. This command may well be superceded by FILTERing.

-

11.187 unset/badword <word>.. (8) +

11.190 unset/badword <word>.. (8)

unset/badword <word>.. Propagate things with this word again

@@ -1862,27 +1877,32 @@ will stop anything with these words in the text. will allow text with this word again.

-

11.188 unset/beep (0) +

11.191 unset/beep (0)

unset/beep Stop beeps for DX and other messages on your terminal

-

11.189 unset/dx (0) +

11.192 unset/dx (0)

unset/dx Stop DX messages coming out on your terminal

-

11.190 unset/dxgrid (0) +

11.193 unset/dxgrid (0)

unset/dxgrid Stop QRA Grid Squares on the end of DX announcements

A standard feature which is enabled in version 1.43 and above is that if the spotter's grid square is known it is output on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. You can use this command to reset (or set)this feature.

-

11.191 unset/echo (0) +

11.194 unset/dxstate (0) +

+ +

unset/dxstate Stop US State info on the end of DX announcements

+

If the spotter's or spotted's US State is known it is output on the end of a DX announcement (there is just enough room). A spotter's state will appear on the RHS of the time (like SET/DXGRID) and the spotted's State will appear on the LHS of thetime field. Any information found will override any locator information from SET/DXGRID.Some user programs cannot cope with this. You can use this command to reset (or set) this feature.

+

11.195 unset/echo (0)

unset/echo Stop the cluster echoing your input

If you are connected via a telnet session, different implimentationsof telnet handle echo differently depending on whether you are connected via port 23 or some other port. You can use this commandto change the setting appropriately. The setting is stored in your user profile.YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.

-

11.192 unset/email (0) +

11.196 unset/email (0)

unset/email Stop personal msgs being forwarded by email

@@ -1899,12 +1919,12 @@ You can have more than one email address (each one separated by a space).Emails

-

11.193 unset/here (0) +

11.197 unset/here (0)

unset/here Tell the system you are absent from your terminal

-

11.194 unset/hops <call> ann|spots|route|wwv|wcy (8) +

11.198 unset/hops <call> ann|spots|route|wwv|wcy (8)

unset/hops <call> ann|spots|route|wwv|wcy Unset hop count

@@ -1921,17 +1941,17 @@ Set SHOW/HOPS for information on what is already set. This commandcreates a filt

-

11.195 unset/logininfo (0) +

11.199 unset/logininfo (0)

unset/logininfo Inform when a station logs out locally

-

11.196 unset/privilege (0) +

11.200 unset/privilege (0)

unset/privilege Remove any privilege for this session

You can use this command to 'protect' this session from unauthoriseduse. If you want to get your normal privilege back you will need toeither logout and login again (if you are on a console) or use theSYSOP command.

-

11.197 unset/prompt (0) +

11.201 unset/prompt (0)

unset/prompt Set your prompt back to default

@@ -1942,42 +1962,42 @@ Set SHOW/HOPS for information on what is already set. This commandcreates a filt UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back tonormal.

-

11.198 unset/talk (0) +

11.202 unset/talk (0)

unset/talk Stop TALK messages coming out on your terminal

-

11.199 unset/wcy (0) +

11.203 unset/wcy (0)

unset/wcy Stop WCY messages coming out on your terminal

-

11.200 unset/wwv (0) +

11.204 unset/wwv (0)

unset/wwv Stop WWV messages coming out on your terminal

-

11.201 unset/wx (0) +

11.205 unset/wx (0)

unset/wx Stop WX messages coming out on your terminal

-

11.202 who (0) +

11.206 who (0)

who Show who is physically connected

This is a quick listing that shows which callsigns are connected andwhat sort of connection they have

-

11.203 wx <text> (0) +

11.207 wx <text> (0)

wx <text> Send a weather message to local users

-

11.204 wx full <text> (0) +

11.208 wx full <text> (0)

wx full <text> Send a weather message to all cluster users

-

11.205 wx sysop <text> (5) +

11.209 wx sysop <text> (5)

wx sysop <text> Send a weather message to other clusters only

diff --git a/html/adminmanual_en.html b/html/adminmanual_en.html index 8e8b16cd..e87719f2 100644 --- a/html/adminmanual_en.html +++ b/html/adminmanual_en.html @@ -213,107 +213,111 @@ Charlie Carroll, K1XX, (k1xx@ptcnh.net)February 2003 revision 0.3
  • 11.102 set/dx (0)
  • 11.103 set/dxgrid (0)
  • 11.104 set/dxnet <call> [<call>..] (5) -
  • 11.105 set/echo (0) -
  • 11.106 set/email <email> ... (0) -
  • 11.107 set/here (0) -
  • 11.108 set/homenode <node> (0) -
  • 11.109 set/hops <call> ann|spots|route|wwv|wcy <n> (8) -
  • 11.110 set/language <lang> (0) -
  • 11.111 set/location <lat & long> (0) -
  • 11.112 set/logininfo (0) -
  • 11.113 set/name <your name> (0) -
  • 11.114 set/node <call> [<call>..] (5) -
  • 11.115 set/obscount <count> <call> (8) -
  • 11.116 set/page <lines per page> (0) -
  • 11.117 set/password (0) -
  • 11.118 set/prompt <string> (0) -
  • 11.119 set/qra <locator> (0) -
  • 11.120 set/qth <your qth> (0) -
  • 11.121 set/spider <call> [<call>..] (5) -
  • 11.122 set/talk (0) -
  • 11.123 set/wcy (0) -
  • 11.124 set/wwv (0) -
  • 11.125 set/wx (0) -
  • 11.126 show/baddx (1) -
  • 11.127 show/badnode (1) -
  • 11.128 show/badspotter (1) -
  • 11.129 show/badword (1) -
  • 11.130 show/configuration [<node>] (0) -
  • 11.131 show/configuration/node (0) -
  • 11.132 show/connect (1) -
  • 11.133 show/date [<prefix>|<callsign>] (0) -
  • 11.134 show/dx (0) -
  • 11.135 show/dxcc <prefix> (0) -
  • 11.136 show/dxstats [days] [date] (0) -
  • 11.137 show/files [<filearea> [<string>]] (0) -
  • 11.138 show/filter (0) -
  • 11.139 show/hfstats [days] [date] (0) -
  • 11.140 show/hftable [days] [date] [prefix ...] (0) -
  • 11.141 show/hops <call> [ann|spots|route|wcy|wwv] (8) -
  • 11.142 show/isolate (1) -
  • 11.143 show/log [<callsign>] (8) -
  • 11.144 show/moon [ndays] [<prefix>|<callsign>] (0) -
  • 11.145 show/muf <prefix> [<hours>][long] (0) -
  • 11.146 show/newconfiguration [<node>] (0) -
  • 11.147 show/newconfiguration/node (0) -
  • 11.148 show/node [<callsign> ...] (1) -
  • 11.149 show/prefix <callsign> (0) -
  • 11.150 show/program (5) -
  • 11.151 show/qra <lat> <long> (0) -
  • 11.152 show/qra <locator> [<locator>] (0) -
  • 11.153 show/qrz <callsign> (0) -
  • 11.154 show/route <callsign> ... (0) -
  • 11.155 show/satellite <name> [<hours> <interval>] (0) -
  • 11.156 show/station all [<regex>] (6) -
  • 11.157 show/station [<callsign> ..] (0) -
  • 11.158 show/sun [ndays] [<prefix>|<callsign>] (0) -
  • 11.159 show/time [<prefix>|<callsign>] (0) -
  • 11.160 show/usdb [call ..] (0) -
  • 11.161 show/vhfstats [days] [date] (0) -
  • 11.162 show/vhftable [days] [date] [prefix ...] (0) -
  • 11.163 show/wcy (0) -
  • 11.164 show/wcy <n> (0) -
  • 11.165 show/wwv (0) -
  • 11.166 show/wwv <n> (0) -
  • 11.167 shutdown (5) -
  • 11.168 stat/channel [<callsign>] (5) -
  • 11.169 stat/db <dbname> (5) -
  • 11.170 stat/msg (1) -
  • 11.171 stat/msg <msgno> (1) -
  • 11.172 stat/route_node <callsign> (5) -
  • 11.173 stat/route_node all (5) -
  • 11.174 stat/route_user <callsign> (5) -
  • 11.175 stat/route_user all (5) -
  • 11.176 stat/user [<callsign>] (5) -
  • 11.177 sysop (0) -
  • 11.178 talk <call> > <node> [<text>] (0) -
  • 11.179 talk <call> [<text>] (0) -
  • 11.180 type <filearea>/<name> (0) -
  • 11.181 uncatchup <node call> all|[msgno> ...] (5) -
  • 11.182 unset/announce (0) -
  • 11.183 unset/anntalk (0) -
  • 11.184 unset/baddx <call>.. (8) -
  • 11.185 unset/badnode <call>.. (8) -
  • 11.186 unset/badspotter <call>.. (8) -
  • 11.187 unset/badword <word>.. (8) -
  • 11.188 unset/beep (0) -
  • 11.189 unset/dx (0) -
  • 11.190 unset/dxgrid (0) -
  • 11.191 unset/echo (0) -
  • 11.192 unset/email (0) -
  • 11.193 unset/here (0) -
  • 11.194 unset/hops <call> ann|spots|route|wwv|wcy (8) -
  • 11.195 unset/logininfo (0) -
  • 11.196 unset/privilege (0) -
  • 11.197 unset/prompt (0) -
  • 11.198 unset/talk (0) -
  • 11.199 unset/wcy (0) -
  • 11.200 unset/wwv (0) -
  • 11.201 unset/wx (0) -
  • 11.202 who (0) -
  • 11.203 wx <text> (0) -
  • 11.204 wx full <text> (0) -
  • 11.205 wx sysop <text> (5) +
  • 11.105 set/dxstate (0) +
  • 11.106 set/echo (0) +
  • 11.107 set/email <email> ... (0) +
  • 11.108 set/here (0) +
  • 11.109 set/homenode <node> (0) +
  • 11.110 set/hops <call> ann|spots|route|wwv|wcy <n> (8) +
  • 11.111 set/language <lang> (0) +
  • 11.112 set/location <lat & long> (0) +
  • 11.113 set/logininfo (0) +
  • 11.114 set/name <your name> (0) +
  • 11.115 set/node <call> [<call>..] (5) +
  • 11.116 set/obscount <count> <call> (8) +
  • 11.117 set/page <lines per page> (0) +
  • 11.118 set/password (0) +
  • 11.119 set/prompt <string> (0) +
  • 11.120 set/qra <locator> (0) +
  • 11.121 set/qth <your qth> (0) +
  • 11.122 set/spider <call> [<call>..] (5) +
  • 11.123 set/talk (0) +
  • 11.124 set/wcy (0) +
  • 11.125 set/wwv (0) +
  • 11.126 set/wx (0) +
  • 11.127 show/baddx (1) +
  • 11.128 show/badnode (1) +
  • 11.129 show/badspotter (1) +
  • 11.130 show/badword (1) +
  • 11.131 show/configuration [<node>] (0) +
  • 11.132 show/configuration/node (0) +
  • 11.133 show/connect (1) +
  • 11.134 show/date [<prefix>|<callsign>] (0) +
  • 11.135 show/db0sdx <callsign> (0) +
  • 11.136 show/dx (0) +
  • 11.137 show/dxcc <prefix> (0) +
  • 11.138 show/dxstats [days] [date] (0) +
  • 11.139 show/files [<filearea> [<string>]] (0) +
  • 11.140 show/filter (0) +
  • 11.141 show/hfstats [days] [date] (0) +
  • 11.142 show/hftable [days] [date] [prefix ...] (0) +
  • 11.143 show/hops <call> [ann|spots|route|wcy|wwv] (8) +
  • 11.144 show/isolate (1) +
  • 11.145 show/log [<callsign>] (8) +
  • 11.146 show/moon [ndays] [<prefix>|<callsign>] (0) +
  • 11.147 show/muf <prefix> [<hours>][long] (0) +
  • 11.148 show/newconfiguration [<node>] (0) +
  • 11.149 show/newconfiguration/node (0) +
  • 11.150 show/node [<callsign> ...] (1) +
  • 11.151 show/prefix <callsign> (0) +
  • 11.152 show/program (5) +
  • 11.153 show/qra <lat> <long> (0) +
  • 11.154 show/qra <locator> [<locator>] (0) +
  • 11.155 show/qrz <callsign> (0) +
  • 11.156 show/route <callsign> ... (0) +
  • 11.157 show/satellite <name> [<hours> <interval>] (0) +
  • 11.158 show/station all [<regex>] (6) +
  • 11.159 show/station [<callsign> ..] (0) +
  • 11.160 show/sun [ndays] [<prefix>|<callsign>] (0) +
  • 11.161 show/time [<prefix>|<callsign>] (0) +
  • 11.162 show/usdb [call ..] (0) +
  • 11.163 show/vhfstats [days] [date] (0) +
  • 11.164 show/vhftable [days] [date] [prefix ...] (0) +
  • 11.165 show/wcy (0) +
  • 11.166 show/wcy <n> (0) +
  • 11.167 show/wm7d <callsign> (0) +
  • 11.168 show/wwv (0) +
  • 11.169 show/wwv <n> (0) +
  • 11.170 shutdown (5) +
  • 11.171 stat/channel [<callsign>] (5) +
  • 11.172 stat/db <dbname> (5) +
  • 11.173 stat/msg (1) +
  • 11.174 stat/msg <msgno> (1) +
  • 11.175 stat/route_node <callsign> (5) +
  • 11.176 stat/route_node all (5) +
  • 11.177 stat/route_user <callsign> (5) +
  • 11.178 stat/route_user all (5) +
  • 11.179 stat/user [<callsign>] (5) +
  • 11.180 sysop (0) +
  • 11.181 talk <call> > <node> [<text>] (0) +
  • 11.182 talk <call> [<text>] (0) +
  • 11.183 type <filearea>/<name> (0) +
  • 11.184 uncatchup <node call> all|[msgno> ...] (5) +
  • 11.185 unset/announce (0) +
  • 11.186 unset/anntalk (0) +
  • 11.187 unset/baddx <call>.. (8) +
  • 11.188 unset/badnode <call>.. (8) +
  • 11.189 unset/badspotter <call>.. (8) +
  • 11.190 unset/badword <word>.. (8) +
  • 11.191 unset/beep (0) +
  • 11.192 unset/dx (0) +
  • 11.193 unset/dxgrid (0) +
  • 11.194 unset/dxstate (0) +
  • 11.195 unset/echo (0) +
  • 11.196 unset/email (0) +
  • 11.197 unset/here (0) +
  • 11.198 unset/hops <call> ann|spots|route|wwv|wcy (8) +
  • 11.199 unset/logininfo (0) +
  • 11.200 unset/privilege (0) +
  • 11.201 unset/prompt (0) +
  • 11.202 unset/talk (0) +
  • 11.203 unset/wcy (0) +
  • 11.204 unset/wwv (0) +
  • 11.205 unset/wx (0) +
  • 11.206 who (0) +
  • 11.207 wx <text> (0) +
  • 11.208 wx full <text> (0) +
  • 11.209 wx sysop <text> (5)
    Next diff --git a/html/usermanual_en-12.html b/html/usermanual_en-12.html index 2a5c917c..c6866508 100644 --- a/html/usermanual_en-12.html +++ b/html/usermanual_en-12.html @@ -1146,25 +1146,31 @@ message.

    set/dxgrid Allow QRA Grid Squares on the end of DX announcements

    -

    12.60 set/echo +

    12.60 set/dxstate +

    + +

    set/dxstate Allow US State info on the end of DX announcements

    + + +

    12.61 set/echo

    set/echo Make the cluster echo your input

    -

    12.61 set/email <email> ... +

    12.62 set/email <email> ...

    set/email <email> ... Set email address(es) and forward your personals

    -

    12.62 set/here +

    12.63 set/here

    set/here Tell the system you are present at your terminal

    -

    12.63 set/homenode <node> +

    12.64 set/homenode <node>

    set/homenode <node> Set your normal cluster callsign

    @@ -1179,7 +1185,7 @@ eg:-

    -

    12.64 set/language <lang> +

    12.65 set/language <lang>

    set/language <lang> Set the language you want to use

    @@ -1187,19 +1193,19 @@ eg:-

    You can select the language that you want the cluster to use. Currently the languages available are en (English), de (German), es (Spanish) and nl (Dutch).

    -

    12.65 set/location <lat & long> +

    12.66 set/location <lat & long>

    set/location <lat & long> Set your latitude and longitude

    -

    12.66 set/logininfo +

    12.67 set/logininfo

    set/logininfo Inform when a station logs in locally

    -

    12.67 set/name <your name> +

    12.68 set/name <your name>

    set/name <your name> Set your name

    @@ -1212,7 +1218,7 @@ and nl (Dutch).

    -

    12.68 set/page <lines per page> +

    12.69 set/page <lines per page>

    set/page <lines per page> Set the lines per page

    @@ -1228,7 +1234,7 @@ explicitly to 0 will disable paging.

    The setting is stored in your user profile.

    -

    12.69 set/password +

    12.70 set/password

    set/password Set your own password

    @@ -1240,13 +1246,13 @@ can only be set by the sysop.

    then ask you to type in your new password twice (to make sure you get it right). You may or may not see the data echoed on the screen as you type, depending on the type of telnet client you have.

    -

    12.70 set/prompt <string> +

    12.71 set/prompt <string>

    set/prompt <string> Set your prompt to <string>

    -

    12.71 set/qra <locator> +

    12.72 set/qra <locator>

    set/qra <locator> Set your QRA Grid locator

    @@ -1261,7 +1267,7 @@ correctly (assuming your locator is correct ;-). For example:-

    -

    12.72 set/qth <your qth> +

    12.73 set/qth <your qth>

    set/qth <your qth> Set your QTH

    @@ -1274,31 +1280,31 @@ correctly (assuming your locator is correct ;-). For example:-

    -

    12.73 set/talk +

    12.74 set/talk

    set/talk Allow TALK messages to come out on your terminal

    -

    12.74 set/wcy +

    12.75 set/wcy

    set/wcy Allow WCY messages to come out on your terminal

    -

    12.75 set/wwv +

    12.76 set/wwv

    set/wwv Allow WWV messages to come out on your terminal

    -

    12.76 set/wx +

    12.77 set/wx

    set/wx Allow WX messages to come out on your terminal

    -

    12.77 show/configuration [<node>] +

    12.78 show/configuration [<node>]

    show/configuration [<node>] Show all the nodes and users visible

    @@ -1335,13 +1341,13 @@ that prefix.

    -

    12.78 show/configuration/node +

    12.79 show/configuration/node

    show/configuration/node Show all the nodes connected locally

    Show all the nodes connected to this node.

    -

    12.79 show/date [<prefix>|<callsign>] +

    12.80 show/date [<prefix>|<callsign>]

    show/date [<prefix>|<callsign>] Show the local time

    @@ -1352,7 +1358,16 @@ of the date string if no arguments are given.

    time and UTC as the computer has it right now. If you give some prefixes then it will show UTC and UTC + the local offset (not including DST) at the prefixes or callsigns that you specify.

    -

    12.80 show/dx +

    12.81 show/db0sdx <callsign> +

    + +

    show/db0sdx <callsign> Show QSL infomation from DB0SDX database

    + +

    This command queries the DB0SDX QSL server on the internet +and returns any information available for that callsign. This service +is provided for users of this software by http://www.qslinfo.de.

    +

    See also SHOW/QRZ, SHOW/WM7D.

    +

    12.82 show/dx

    show/dx Interrogate the spot database

    @@ -1479,7 +1494,7 @@ any order to the basic SHOW/DX command, they are:-

    -

    12.81 show/dxcc <prefix> +

    12.83 show/dxcc <prefix>

    show/dxcc <prefix> Interrogate the spot database by country

    @@ -1508,14 +1523,14 @@ e.g.

    -

    12.82 show/dxstats [days] [date] +

    12.84 show/dxstats [days] [date]

    show/dxstats [days] [date] Show the DX Statistics

    Show the total DX spots for the last <days> no of days (default is 31), starting from a <date> (default: today).

    -

    12.83 show/files [<filearea> [<string>]] +

    12.85 show/files [<filearea> [<string>]]

    show/files [<filearea> [<string>]] List the contents of a filearea

    @@ -1540,21 +1555,21 @@ string to see a selection of files in a filearea eg:-

    See also TYPE - to see the contents of a file.

    -

    12.84 show/filter +

    12.86 show/filter

    show/filter Show the contents of all the filters you have set

    Show the contents of all the filters that are set. This command displays all the filters set - for all the various categories.

    -

    12.85 show/hfstats [days] [date] +

    12.87 show/hfstats [days] [date]

    show/hfstats [days] [date] Show the HF DX Statistics

    Show the HF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a <date> (default: today).

    -

    12.86 show/hftable [days] [date] [prefix ...] +

    12.88 show/hftable [days] [date] [prefix ...]

    show/hftable [days] [date] [prefix ...] Show the HF DX Spotter Table

    @@ -1607,7 +1622,7 @@ the worldwide statistics.

    -

    12.87 show/moon [ndays] [<prefix>|<callsign>] +

    12.89 show/moon [ndays] [<prefix>|<callsign>]

    show/moon [ndays] [<prefix>|<callsign>] Show Moon rise and set times

    @@ -1650,7 +1665,7 @@ if you want to see yesterday's times then do:-

    Upto 366 days can be checked both in the past and in the future.

    Please note that the rise and set times are given as the UT times of rise and set on the requested UT day.

    -

    12.88 show/muf <prefix> [<hours>][long] +

    12.90 show/muf <prefix> [<hours>][long]

    show/muf <prefix> [<hours>][long] Show the likely propagation to a prefix

    @@ -1729,7 +1744,7 @@ propagation data.

    Gives you an estimate of the long path propagation characterics. It should be noted that the figures will probably not be very useful, nor terrible accurate, but it is included for completeness.

    -

    12.89 show/newconfiguration [<node>] +

    12.91 show/newconfiguration [<node>]

    show/newconfiguration [<node>] Show all the nodes and users visible

    @@ -1742,13 +1757,13 @@ any routes that might be present It also uses a different format which may not take up quite as much space if you don't have any loops.

    BE WARNED: the list that is returned can be VERY long

    -

    12.90 show/newconfiguration/node +

    12.92 show/newconfiguration/node

    show/newconfiguration/node Show all the nodes connected locally

    Show all the nodes connected to this node in the new format.

    -

    12.91 show/prefix <callsign> +

    12.93 show/prefix <callsign>

    show/prefix <callsign> Interrogate the prefix database

    @@ -1758,7 +1773,7 @@ callsign or a prefix), looks up which internal country number it is and then displays all the relevant prefixes for that country together with the internal country no, the CQ and ITU regions.

    See also SHOW/DXCC

    -

    12.92 show/qra <lat> <long> +

    12.94 show/qra <lat> <long>

    show/qra <lat> <long> Convert lat/long to a QRA Grid locator

    @@ -1789,13 +1804,13 @@ example:-

    -

    12.93 show/qra <locator> [<locator>] +

    12.95 show/qra <locator> [<locator>]

    show/qra <locator> [<locator>] Show distance between QRA Grid locators

    -

    12.94 show/qrz <callsign> +

    12.96 show/qrz <callsign>

    show/qrz <callsign> Show any callbook details on a callsign

    @@ -1803,7 +1818,8 @@ example:-

    This command queries the QRZ callbook server on the internet and returns any information available for that callsign. This service is provided for users of this software by http://www.qrz.com

    -

    12.95 show/route <callsign> ... +

    See also SHOW/WM7D for an alternative.

    +

    12.97 show/route <callsign> ...

    show/route <callsign> ... Show the route to the callsign

    @@ -1818,7 +1834,7 @@ connected. It is a sort of inverse sh/config.

    -

    12.96 show/satellite <name> [<hours> <interval>] +

    12.98 show/satellite <name> [<hours> <interval>]

    show/satellite <name> [<hours> <interval>] Show tracking data

    @@ -1843,7 +1859,7 @@ limits.

    -

    12.97 show/station [<callsign> ..] +

    12.99 show/station [<callsign> ..]

    show/station [<callsign> ..] Show information about a callsign

    @@ -1858,7 +1874,7 @@ that callsign is connected to the cluster.

    If no callsign is given then show the information for yourself.

    -

    12.98 show/sun [ndays] [<prefix>|<callsign>] +

    12.100 show/sun [ndays] [<prefix>|<callsign>]

    show/sun [ndays] [<prefix>|<callsign>] Show sun rise and set times

    @@ -1900,7 +1916,7 @@ if you want to see yesterday's times then do:-

    Upto 366 days can be checked both in the past and in the future.

    Please note that the rise and set times are given as the UT times of rise and set on the requested UT day.

    -

    12.99 show/time [<prefix>|<callsign>] +

    12.101 show/time [<prefix>|<callsign>]

    show/time [<prefix>|<callsign>] Show the local time

    @@ -1909,7 +1925,7 @@ and set on the requested UT day.

    time and UTC as the computer has it right now. If you give some prefixes then it will show UTC and UTC + the local offset (not including DST) at the prefixes or callsigns that you specify.

    -

    12.100 show/usdb [call ..] +

    12.102 show/usdb [call ..]

    show/usdb [call ..] Show information held on the FCC Call database

    @@ -1924,14 +1940,14 @@ his is being run on this system, eg:-

    -

    12.101 show/vhfstats [days] [date] +

    12.103 show/vhfstats [days] [date]

    show/vhfstats [days] [date] Show the VHF DX Statistics

    Show the VHF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a date (default: today).

    -

    12.102 show/vhftable [days] [date] [prefix ...] +

    12.104 show/vhftable [days] [date] [prefix ...]

    show/vhftable [days] [date] [prefix ...] Show the VHF DX Spotter Table

    @@ -1984,31 +2000,41 @@ the worldwide statistics.

    -

    12.103 show/wcy +

    12.105 show/wcy

    show/wcy Show last 10 WCY broadcasts

    -

    12.104 show/wcy <n> +

    12.106 show/wcy <n>

    show/wcy <n> Show last <n> WCY broadcasts

    Display the most recent WCY information that has been received by the system

    -

    12.105 show/wwv + +

    12.107 show/wm7d <callsign> +

    + +

    show/wm7d <callsign> Show callbook details on a US callsigns

    + +

    This command queries the WM7D callbook server on the internet +and returns any information available for that US callsign. This service +is provided for users of this software by http://www.wm7d.net.

    +

    See also SHOW/QRZ.

    +

    12.108 show/wwv

    show/wwv Show last 10 WWV broadcasts

    -

    12.106 show/wwv <n> +

    12.109 show/wwv <n>

    show/wwv <n> Show last <n> WWV broadcasts

    Display the most recent WWV information that has been received by the system

    -

    12.107 sysop +

    12.110 sysop

    sysop Regain your privileges if you login remotely

    @@ -2044,7 +2070,7 @@ you type:-

    They will all match. If there is no password you will still be offered numbers but nothing will happen when you input a string. Any match is case sensitive.

    -

    12.108 talk <call> > <node> [<text>] +

    12.111 talk <call> > <node> [<text>]

    talk <call> > <node> [<text>] Send a text message to another station via a node

    @@ -2095,13 +2121,13 @@ with the '//' command. For example:-

    will send the hftable as you have it to all the people you are currently talking to.

    -

    12.109 talk <call> [<text>] +

    12.112 talk <call> [<text>]

    talk <call> [<text>] Send a text message to another station

    -

    12.110 type <filearea>/<name> +

    12.113 type <filearea>/<name>

    type <filearea>/<name> Look at the contents of a file in one of the fileareas

    @@ -2117,13 +2143,13 @@ enter:-

    See also SHOW/FILES to see what fileareas are available and a list of content.

    -

    12.111 unset/announce +

    12.114 unset/announce

    unset/announce Stop announce messages coming out on your terminal

    -

    12.112 unset/anntalk +

    12.115 unset/anntalk

    unset/anntalk Stop talk like announce messages on your terminal

    @@ -2148,19 +2174,19 @@ welter of useless ones.

    allows you to see them again. This is the default.

    -

    12.113 unset/beep +

    12.116 unset/beep

    unset/beep Stop beeps for DX and other messages on your terminal

    -

    12.114 unset/dx +

    12.117 unset/dx

    unset/dx Stop DX messages coming out on your terminal

    -

    12.115 unset/dxgrid +

    12.118 unset/dxgrid

    unset/dxgrid Stop QRA Grid Squares on the end of DX announcements

    @@ -2170,7 +2196,20 @@ that if the spotter's grid square is known it is output on the end of a DX announcement (there is just enough room). Some user programs cannot cope with this. You can use this command to reset (or set) this feature.

    -

    12.116 unset/echo +

    12.119 unset/dxstate +

    + +

    unset/dxstate Stop US State info on the end of DX announcements

    + +

    If the spotter's or spotted's US State is known it is output on the +end of a DX announcement (there is just enough room).

    +

    A spotter's state will appear on the RHS of the time (like +SET/DXGRID) and the spotted's State will appear on the LHS of the +time field. Any information found will override any locator +information from SET/DXGRID.

    +

    Some user programs cannot cope with this. You can use this command +to reset (or set) this feature.

    +

    12.120 unset/echo

    unset/echo Stop the cluster echoing your input

    @@ -2181,7 +2220,7 @@ connected via port 23 or some other port. You can use this command to change the setting appropriately.

    The setting is stored in your user profile.

    YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.

    -

    12.117 unset/email +

    12.121 unset/email

    unset/email Stop personal msgs being forwarded by email

    @@ -2207,19 +2246,19 @@ Emails are forwarded to all the email addresses you specify.

    -

    12.118 unset/here +

    12.122 unset/here

    unset/here Tell the system you are absent from your terminal

    -

    12.119 unset/logininfo +

    12.123 unset/logininfo

    unset/logininfo Inform when a station logs out locally

    -

    12.120 unset/privilege +

    12.124 unset/privilege

    unset/privilege Remove any privilege for this session

    @@ -2228,7 +2267,7 @@ Emails are forwarded to all the email addresses you specify.

    use. If you want to get your normal privilege back you will need to either logout and login again (if you are on a console) or use the SYSOP command.

    -

    12.121 unset/prompt +

    12.125 unset/prompt

    unset/prompt Set your prompt back to default

    @@ -2246,44 +2285,44 @@ fixed prompt).

    UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back to normal.

    -

    12.122 unset/talk +

    12.126 unset/talk

    unset/talk Stop TALK messages coming out on your terminal

    -

    12.123 unset/wcy +

    12.127 unset/wcy

    unset/wcy Stop WCY messages coming out on your terminal

    -

    12.124 unset/wwv +

    12.128 unset/wwv

    unset/wwv Stop WWV messages coming out on your terminal

    -

    12.125 unset/wx +

    12.129 unset/wx

    unset/wx Stop WX messages coming out on your terminal

    -

    12.126 who +

    12.130 who

    who Show who is physically connected

    This is a quick listing that shows which callsigns are connected and what sort of connection they have

    -

    12.127 wx <text> +

    12.131 wx <text>

    wx <text> Send a weather message to local users

    -

    12.128 wx full <text> +

    12.132 wx full <text>

    wx full <text> Send a weather message to all cluster users

    diff --git a/html/usermanual_en.html b/html/usermanual_en.html index d1072541..f98b0679 100644 --- a/html/usermanual_en.html +++ b/html/usermanual_en.html @@ -151,75 +151,79 @@ Contents
  • 12.57 set/beep
  • 12.58 set/dx
  • 12.59 set/dxgrid -
  • 12.60 set/echo -
  • 12.61 set/email <email> ... -
  • 12.62 set/here -
  • 12.63 set/homenode <node> -
  • 12.64 set/language <lang> -
  • 12.65 set/location <lat & long> -
  • 12.66 set/logininfo -
  • 12.67 set/name <your name> -
  • 12.68 set/page <lines per page> -
  • 12.69 set/password -
  • 12.70 set/prompt <string> -
  • 12.71 set/qra <locator> -
  • 12.72 set/qth <your qth> -
  • 12.73 set/talk -
  • 12.74 set/wcy -
  • 12.75 set/wwv -
  • 12.76 set/wx -
  • 12.77 show/configuration [<node>] -
  • 12.78 show/configuration/node -
  • 12.79 show/date [<prefix>|<callsign>] -
  • 12.80 show/dx -
  • 12.81 show/dxcc <prefix> -
  • 12.82 show/dxstats [days] [date] -
  • 12.83 show/files [<filearea> [<string>]] -
  • 12.84 show/filter -
  • 12.85 show/hfstats [days] [date] -
  • 12.86 show/hftable [days] [date] [prefix ...] -
  • 12.87 show/moon [ndays] [<prefix>|<callsign>] -
  • 12.88 show/muf <prefix> [<hours>][long] -
  • 12.89 show/newconfiguration [<node>] -
  • 12.90 show/newconfiguration/node -
  • 12.91 show/prefix <callsign> -
  • 12.92 show/qra <lat> <long> -
  • 12.93 show/qra <locator> [<locator>] -
  • 12.94 show/qrz <callsign> -
  • 12.95 show/route <callsign> ... -
  • 12.96 show/satellite <name> [<hours> <interval>] -
  • 12.97 show/station [<callsign> ..] -
  • 12.98 show/sun [ndays] [<prefix>|<callsign>] -
  • 12.99 show/time [<prefix>|<callsign>] -
  • 12.100 show/usdb [call ..] -
  • 12.101 show/vhfstats [days] [date] -
  • 12.102 show/vhftable [days] [date] [prefix ...] -
  • 12.103 show/wcy -
  • 12.104 show/wcy <n> -
  • 12.105 show/wwv -
  • 12.106 show/wwv <n> -
  • 12.107 sysop -
  • 12.108 talk <call> > <node> [<text>] -
  • 12.109 talk <call> [<text>] -
  • 12.110 type <filearea>/<name> -
  • 12.111 unset/announce -
  • 12.112 unset/anntalk -
  • 12.113 unset/beep -
  • 12.114 unset/dx -
  • 12.115 unset/dxgrid -
  • 12.116 unset/echo -
  • 12.117 unset/email -
  • 12.118 unset/here -
  • 12.119 unset/logininfo -
  • 12.120 unset/privilege -
  • 12.121 unset/prompt -
  • 12.122 unset/talk -
  • 12.123 unset/wcy -
  • 12.124 unset/wwv -
  • 12.125 unset/wx -
  • 12.126 who -
  • 12.127 wx <text> -
  • 12.128 wx full <text> +
  • 12.60 set/dxstate +
  • 12.61 set/echo +
  • 12.62 set/email <email> ... +
  • 12.63 set/here +
  • 12.64 set/homenode <node> +
  • 12.65 set/language <lang> +
  • 12.66 set/location <lat & long> +
  • 12.67 set/logininfo +
  • 12.68 set/name <your name> +
  • 12.69 set/page <lines per page> +
  • 12.70 set/password +
  • 12.71 set/prompt <string> +
  • 12.72 set/qra <locator> +
  • 12.73 set/qth <your qth> +
  • 12.74 set/talk +
  • 12.75 set/wcy +
  • 12.76 set/wwv +
  • 12.77 set/wx +
  • 12.78 show/configuration [<node>] +
  • 12.79 show/configuration/node +
  • 12.80 show/date [<prefix>|<callsign>] +
  • 12.81 show/db0sdx <callsign> +
  • 12.82 show/dx +
  • 12.83 show/dxcc <prefix> +
  • 12.84 show/dxstats [days] [date] +
  • 12.85 show/files [<filearea> [<string>]] +
  • 12.86 show/filter +
  • 12.87 show/hfstats [days] [date] +
  • 12.88 show/hftable [days] [date] [prefix ...] +
  • 12.89 show/moon [ndays] [<prefix>|<callsign>] +
  • 12.90 show/muf <prefix> [<hours>][long] +
  • 12.91 show/newconfiguration [<node>] +
  • 12.92 show/newconfiguration/node +
  • 12.93 show/prefix <callsign> +
  • 12.94 show/qra <lat> <long> +
  • 12.95 show/qra <locator> [<locator>] +
  • 12.96 show/qrz <callsign> +
  • 12.97 show/route <callsign> ... +
  • 12.98 show/satellite <name> [<hours> <interval>] +
  • 12.99 show/station [<callsign> ..] +
  • 12.100 show/sun [ndays] [<prefix>|<callsign>] +
  • 12.101 show/time [<prefix>|<callsign>] +
  • 12.102 show/usdb [call ..] +
  • 12.103 show/vhfstats [days] [date] +
  • 12.104 show/vhftable [days] [date] [prefix ...] +
  • 12.105 show/wcy +
  • 12.106 show/wcy <n> +
  • 12.107 show/wm7d <callsign> +
  • 12.108 show/wwv +
  • 12.109 show/wwv <n> +
  • 12.110 sysop +
  • 12.111 talk <call> > <node> [<text>] +
  • 12.112 talk <call> [<text>] +
  • 12.113 type <filearea>/<name> +
  • 12.114 unset/announce +
  • 12.115 unset/anntalk +
  • 12.116 unset/beep +
  • 12.117 unset/dx +
  • 12.118 unset/dxgrid +
  • 12.119 unset/dxstate +
  • 12.120 unset/echo +
  • 12.121 unset/email +
  • 12.122 unset/here +
  • 12.123 unset/logininfo +
  • 12.124 unset/privilege +
  • 12.125 unset/prompt +
  • 12.126 unset/talk +
  • 12.127 unset/wcy +
  • 12.128 unset/wwv +
  • 12.129 unset/wx +
  • 12.130 who +
  • 12.131 wx <text> +
  • 12.132 wx full <text>
    Next diff --git a/sgml/adminmanual_en.sgml b/sgml/adminmanual_en.sgml index eff06a86..769dc87d 100644 --- a/sgml/adminmanual_en.sgml +++ b/sgml/adminmanual_en.sgml @@ -3671,6 +3671,14 @@ You can carry on with the message until you are ready to send it. set/dxnet <call> [<call>..] Make the callsign an DXNet node +

    +set/dxstate (0) + +

    + +set/dxstate Allow US State info on the end of DX announcements + +

    set/echo (0) @@ -4015,6 +4023,19 @@ If no prefixes or callsigns are given then this command returns the local time and UTC as the computer has it right now. If you give some prefixes then it will show UTC and UTC + the local offset (not including DST) at the prefixes or callsigns that you specify. +show/db0sdx <callsign> (0) + +

    + +show/db0sdx <callsign> Show QSL infomation from DB0SDX database + + +

    +This command queries the DB0SDX QSL server on the internet +and returns any information available for that callsign. This service +is provided for users of this software by http://www.qslinfo.de. + +See also SHOW/QRZ, SHOW/WM7D. show/dx (0)

    @@ -4508,6 +4529,8 @@ example:- This command queries the QRZ callbook server on the internet and returns any information available for that callsign. This service is provided for users of this software by http://www.qrz.com + +See also SHOW/WM7D for an alternative. show/route <callsign> ... (0)

    @@ -4725,6 +4748,20 @@ the worldwide statistics.

    Display the most recent WCY information that has been received by the system + +show/wm7d <callsign> (0) + +

    + +show/wm7d <callsign> Show callbook details on a US callsigns + + +

    +This command queries the WM7D callbook server on the internet +and returns any information available for that US callsign. This service +is provided for users of this software by http://www.wm7d.net. + +See also SHOW/QRZ. show/wwv (0)

    @@ -5153,6 +5190,24 @@ that if the spotter's grid square is known it is output on the end of a DX announcement (there is just enough room). Some user programs cannot cope with this. You can use this command to reset (or set) this feature. +unset/dxstate (0) + +

    + +unset/dxstate Stop US State info on the end of DX announcements + + +

    +If the spotter's or spotted's US State is known it is output on the +end of a DX announcement (there is just enough room). + +A spotter's state will appear on the RHS of the time (like +SET/DXGRID) and the spotted's State will appear on the LHS of the +time field. Any information found will override any locator +information from SET/DXGRID. + +Some user programs cannot cope with this. You can use this command +to reset (or set) this feature. unset/echo (0)

    diff --git a/sgml/installation.sgml b/sgml/installation.sgml index 25fcc621..a558ca85 100644 --- a/sgml/installation.sgml +++ b/sgml/installation.sgml @@ -51,7 +51,7 @@ perl distribution. - + diff --git a/sgml/usermanual_en.sgml b/sgml/usermanual_en.sgml index 54225e67..bac44d2f 100644 --- a/sgml/usermanual_en.sgml +++ b/sgml/usermanual_en.sgml @@ -2221,6 +2221,14 @@ You can carry on with the message until you are ready to send it. set/dxgrid Allow QRA Grid Squares on the end of DX announcements +

    +set/dxstate + +

    + +set/dxstate Allow US State info on the end of DX announcements + +

    set/echo @@ -2462,6 +2470,19 @@ If no prefixes or callsigns are given then this command returns the local time and UTC as the computer has it right now. If you give some prefixes then it will show UTC and UTC + the local offset (not including DST) at the prefixes or callsigns that you specify. +show/db0sdx <callsign> + +

    + +show/db0sdx <callsign> Show QSL infomation from DB0SDX database + + +

    +This command queries the DB0SDX QSL server on the internet +and returns any information available for that callsign. This service +is provided for users of this software by http://www.qslinfo.de. + +See also SHOW/QRZ, SHOW/WM7D. show/dx

    @@ -2903,6 +2924,8 @@ example:- This command queries the QRZ callbook server on the internet and returns any information available for that callsign. This service is provided for users of this software by http://www.qrz.com + +See also SHOW/WM7D for an alternative. show/route <callsign> ...

    @@ -3112,6 +3135,20 @@ the worldwide statistics.

    Display the most recent WCY information that has been received by the system + +show/wm7d <callsign> + +

    + +show/wm7d <callsign> Show callbook details on a US callsigns + + +

    +This command queries the WM7D callbook server on the internet +and returns any information available for that US callsign. This service +is provided for users of this software by http://www.wm7d.net. + +See also SHOW/QRZ. show/wwv

    @@ -3303,6 +3340,24 @@ that if the spotter's grid square is known it is output on the end of a DX announcement (there is just enough room). Some user programs cannot cope with this. You can use this command to reset (or set) this feature. +unset/dxstate + +

    + +unset/dxstate Stop US State info on the end of DX announcements + + +

    +If the spotter's or spotted's US State is known it is output on the +end of a DX announcement (there is just enough room). + +A spotter's state will appear on the RHS of the time (like +SET/DXGRID) and the spotted's State will appear on the LHS of the +time field. Any information found will override any locator +information from SET/DXGRID. + +Some user programs cannot cope with this. You can use this command +to reset (or set) this feature. unset/echo

    diff --git a/txt/adminmanual_en.txt b/txt/adminmanual_en.txt index 4401fede..caf24704 100644 --- a/txt/adminmanual_en.txt +++ b/txt/adminmanual_en.txt @@ -173,107 +173,113 @@ 11.102 set/dx (0) 11.103 set/dxgrid (0) 11.104 set/dxnet [..] (5) - 11.105 set/echo (0) - 11.106 set/email ... (0) - 11.107 set/here (0) - 11.108 set/homenode (0) - 11.109 set/hops ann|spots|route|wwv|wcy (8) - 11.110 set/language (0) - 11.111 set/location (0) - 11.112 set/logininfo (0) - 11.113 set/name (0) - 11.114 set/node [..] (5) - 11.115 set/obscount (8) - 11.116 set/page (0) - 11.117 set/password (0) - 11.118 set/prompt (0) - 11.119 set/qra (0) - 11.120 set/qth (0) - 11.121 set/spider [..] (5) - 11.122 set/talk (0) - 11.123 set/wcy (0) - 11.124 set/wwv (0) - 11.125 set/wx (0) - 11.126 show/baddx (1) - 11.127 show/badnode (1) - 11.128 show/badspotter (1) - 11.129 show/badword (1) - 11.130 show/configuration [] (0) - 11.131 show/configuration/node (0) - 11.132 show/connect (1) - 11.133 show/date [|] (0) - 11.134 show/dx (0) - 11.135 show/dxcc (0) - 11.136 show/dxstats [days] [date] (0) - 11.137 show/files [ []] (0) - 11.138 show/filter (0) - 11.139 show/hfstats [days] [date] (0) - 11.140 show/hftable [days] [date] [prefix ...] (0) - 11.141 show/hops [ann|spots|route|wcy|wwv] (8) - 11.142 show/isolate (1) - 11.143 show/log [] (8) - 11.144 show/moon [ndays] [|] (0) - 11.145 show/muf [][long] (0) - 11.146 show/newconfiguration [] (0) - 11.147 show/newconfiguration/node (0) - 11.148 show/node [ ...] (1) - 11.149 show/prefix (0) - 11.150 show/program (5) - 11.151 show/qra (0) - 11.152 show/qra [] (0) - 11.153 show/qrz (0) - 11.154 show/route ... (0) - 11.155 show/satellite [ ] (0) - 11.156 show/station all [] (6) - 11.157 show/station [ ..] (0) - 11.158 show/sun [ndays] [|] (0) - 11.159 show/time [|] (0) - 11.160 show/usdb [call ..] (0) - 11.161 show/vhfstats [days] [date] (0) - 11.162 show/vhftable [days] [date] [prefix ...] (0) - 11.163 show/wcy (0) - 11.164 show/wcy (0) - 11.165 show/wwv (0) - 11.166 show/wwv (0) - 11.167 shutdown (5) - 11.168 stat/channel [] (5) - 11.169 stat/db (5) - 11.170 stat/msg (1) - 11.171 stat/msg (1) - 11.172 stat/route_node (5) - 11.173 stat/route_node all (5) - 11.174 stat/route_user (5) - 11.175 stat/route_user all (5) - 11.176 stat/user [] (5) - 11.177 sysop (0) - 11.178 talk > [] (0) - 11.179 talk [] (0) - 11.180 type / (0) - 11.181 uncatchup all|[msgno> ...] (5) - 11.182 unset/announce (0) - 11.183 unset/anntalk (0) - 11.184 unset/baddx .. (8) - 11.185 unset/badnode .. (8) - 11.186 unset/badspotter .. (8) - 11.187 unset/badword .. (8) - 11.188 unset/beep (0) - 11.189 unset/dx (0) - 11.190 unset/dxgrid (0) - 11.191 unset/echo (0) - 11.192 unset/email (0) - 11.193 unset/here (0) - 11.194 unset/hops ann|spots|route|wwv|wcy (8) - 11.195 unset/logininfo (0) - 11.196 unset/privilege (0) - 11.197 unset/prompt (0) - 11.198 unset/talk (0) - 11.199 unset/wcy (0) - 11.200 unset/wwv (0) - 11.201 unset/wx (0) - 11.202 who (0) - 11.203 wx (0) - 11.204 wx full (0) - 11.205 wx sysop (5) + 11.105 set/dxstate (0) + 11.106 set/echo (0) + 11.107 set/email ... (0) + 11.108 set/here (0) + 11.109 set/homenode (0) + 11.110 set/hops ann|spots|route|wwv|wcy (8) + 11.111 set/language (0) + 11.112 set/location (0) + 11.113 set/logininfo (0) + 11.114 set/name (0) + 11.115 set/node [..] (5) + 11.116 set/obscount (8) + 11.117 set/page (0) + 11.118 set/password (0) + 11.119 set/prompt (0) + 11.120 set/qra (0) + 11.121 set/qth (0) + 11.122 set/spider [..] (5) + 11.123 set/talk (0) + 11.124 set/wcy (0) + 11.125 set/wwv (0) + 11.126 set/wx (0) + 11.127 show/baddx (1) + 11.128 show/badnode (1) + 11.129 show/badspotter (1) + 11.130 show/badword (1) + 11.131 show/configuration [] (0) + 11.132 show/configuration/node (0) + 11.133 show/connect (1) + 11.134 show/date [|] (0) + 11.135 show/db0sdx (0) + 11.136 show/dx (0) + 11.137 show/dxcc (0) + 11.138 show/dxstats [days] [date] (0) + 11.139 show/files [ []] (0) + 11.140 show/filter (0) + 11.141 show/hfstats [days] [date] (0) + 11.142 show/hftable [days] [date] [prefix ...] (0) + 11.143 show/hops [ann|spots|route|wcy|wwv] (8) + 11.144 show/isolate (1) + 11.145 show/log [] (8) + 11.146 show/moon [ndays] [|] (0) + 11.147 show/muf [][long] (0) + 11.148 show/newconfiguration [] (0) + 11.149 show/newconfiguration/node (0) + 11.150 show/node [ ...] (1) + 11.151 show/prefix (0) + 11.152 show/program (5) + 11.153 show/qra (0) + 11.154 show/qra [] (0) + 11.155 show/qrz (0) + 11.156 show/route ... (0) + 11.157 show/satellite [ ] (0) + 11.158 show/station all [] (6) + 11.159 show/station [ ..] (0) + 11.160 show/sun [ndays] [|] (0) + 11.161 show/time [|] (0) + 11.162 show/usdb [call ..] (0) + 11.163 show/vhfstats [days] [date] (0) + 11.164 show/vhftable [days] [date] [prefix ...] (0) + 11.165 show/wcy (0) + 11.166 show/wcy (0) + 11.167 show/wm7d (0) + 11.168 show/wwv (0) + 11.169 show/wwv (0) + 11.170 shutdown (5) + 11.171 stat/channel [] (5) + 11.172 stat/db (5) + 11.173 stat/msg (1) + 11.174 stat/msg (1) + 11.175 stat/route_node (5) + 11.176 stat/route_node all (5) + 11.177 stat/route_user (5) + 11.178 stat/route_user all (5) + 11.179 stat/user [] (5) + 11.180 sysop (0) + 11.181 talk > [] (0) + 11.182 talk [] (0) + 11.183 type / (0) + 11.184 uncatchup all|[msgno> ...] (5) + 11.185 unset/announce (0) + 11.186 unset/anntalk (0) + 11.187 unset/baddx .. (8) + 11.188 unset/badnode .. (8) + 11.189 unset/badspotter .. (8) + 11.190 unset/badword .. (8) + 11.191 unset/beep (0) + 11.192 unset/dx (0) + 11.193 unset/dxgrid (0) + 11.194 unset/dxstate (0) + 11.195 unset/echo (0) + 11.196 unset/email (0) + 11.197 unset/here (0) + 11.198 unset/hops ann|spots|route|wwv|wcy (8) + 11.199 unset/logininfo (0) + 11.200 unset/privilege (0) + 11.201 unset/prompt (0) + 11.202 unset/talk (0) + 11.203 unset/wcy (0) + 11.204 unset/wwv (0) + 11.205 unset/wx (0) + 11.206 who (0) + 11.207 wx (0) + 11.208 wx full (0) + 11.209 wx sysop (5) + + ______________________________________________________________________ 1. Routing and Filtering @@ -339,7 +345,6 @@ either. Use one or the other, not both. - You will only require this functionality if you are "well-connected". What that means is that you are connected to several different parts of (say) the EU cluster and, at the same time, also connected to two @@ -403,7 +408,6 @@ per link default. - For the default routing filter then you have two real choices: either a "national" view or the "safe" option of only your own callsign. Examples of each (for my node: GB7DJK) are:- @@ -465,6 +469,9 @@ Exactly the same rules apply for general route filtering. You would use either an accept filter or a reject filter like this ... + + + reject/route or @@ -525,7 +532,6 @@ will be renamed as you update. - There are 3 basic commands involved in setting and manipulating filters. These are accept, reject and clear. First we will look generally at filtering. There are a number of things you can filter in @@ -646,7 +652,6 @@ on VHF which don't either originate or spot someone in Europe. - This is an example where you would use a line number (1 and 2 in this case), if you leave the digit out, the system assumes '1'. Digits '0'-'9' are available. This make it easier to see just what filters @@ -704,8 +709,6 @@ You can filter in several different ways. The options are listed in the various helpfiles for accept, reject and filter. - - 1.8. Default filters Sometimes all that is needed is a general rule for node connects. @@ -3619,22 +3622,27 @@ - 11.105. set/echo (0) + 11.105. set/dxstate (0) + + set/dxstate Allow US State info on the end of DX announcements + + + 11.106. set/echo (0) set/echo Make the cluster echo your input - 11.106. set/email ... (0) + 11.107. set/email ... (0) set/email ... Set email address(es) and forward your personals - 11.107. set/here (0) + 11.108. set/here (0) set/here Tell the system you are present at your terminal - 11.108. set/homenode (0) + 11.109. set/homenode (0) set/homenode Set your normal cluster callsign @@ -3647,12 +3655,12 @@ - 11.109. set/hops ann|spots|route|wwv|wcy (8) + 11.110. set/hops ann|spots|route|wwv|wcy (8) set/hops ann|spots|route|wwv|wcy Set hop count - 11.110. set/language (0) + 11.111. set/language (0) set/language Set the language you want to use @@ -3660,17 +3668,17 @@ Currentlythe languages available are en (English), de (German), es (Spanish) and nl (Dutch). - 11.111. set/location (0) + 11.112. set/location (0) set/location Set your latitude and longitude - 11.112. set/logininfo (0) + 11.113. set/logininfo (0) set/logininfo Inform when a station logs in locally - 11.113. set/name (0) + 11.114. set/name (0) set/name Set your name @@ -3679,16 +3687,14 @@ SET/NAME Dirk - - - 11.114. set/node [..] (5) + 11.115. set/node [..] (5) set/node [..] Make the callsign an AK1A cluster Tell the system that the call(s) are to be treated as AK1A cluster andfed PC Protocol rather normal user commands. - 11.115. set/obscount (8) + 11.116. set/obscount (8) set/obscount Set the 'pump-up' obscelence PING counter @@ -3705,7 +3711,7 @@ between 1 and 9.It is STRONGLY recommended that you don't change the default. - 11.116. set/page (0) + 11.117. set/page (0) set/page Set the lines per page @@ -3720,7 +3726,7 @@ The setting is stored in your user profile. - 11.117. set/password (0) + 11.118. set/password (0) set/password Set your own password @@ -3732,12 +3738,12 @@ the screenas you type, depending on the type of telnet client you have. - 11.118. set/prompt (0) + 11.119. set/prompt (0) set/prompt Set your prompt to - 11.119. set/qra (0) + 11.120. set/qra (0) set/qra Set your QRA Grid locator @@ -3751,7 +3757,7 @@ - 11.120. set/qth (0) + 11.121. set/qth (0) set/qth Set your QTH @@ -3762,48 +3768,48 @@ - 11.121. set/spider [..] (5) + 11.122. set/spider [..] (5) set/spider [..] Make the callsign an DXSpider node Tell the system that the call(s) are to be treated as DXSpider node andfed new style DX Protocol rather normal user commands. - 11.122. set/talk (0) + 11.123. set/talk (0) set/talk Allow TALK messages to come out on your terminal - 11.123. set/wcy (0) + 11.124. set/wcy (0) set/wcy Allow WCY messages to come out on your terminal - 11.124. set/wwv (0) + 11.125. set/wwv (0) set/wwv Allow WWV messages to come out on your terminal - 11.125. set/wx (0) + 11.126. set/wx (0) set/wx Allow WX messages to come out on your terminal - 11.126. show/baddx (1) + 11.127. show/baddx (1) show/baddx Show all the bad dx calls in the system Display all the bad dx callsigns in the system, see SET/BADDXfor more information. - 11.127. show/badnode (1) + 11.128. show/badnode (1) show/badnode Show all the bad nodes in the system Display all the bad node callsigns in the system, see SET/BADNODEfor more information. - 11.128. show/badspotter (1) + 11.129. show/badspotter (1) show/badspotter Show all the bad spotters in the system @@ -3811,14 +3817,14 @@ SET/BADSPOTTERfor more information. - 11.129. show/badword (1) + 11.130. show/badword (1) show/badword Show all the bad words in the system Display all the bad words in the system, see SET/BADWORDfor more information. - 11.130. show/configuration [] (0) + 11.131. show/configuration [] (0) show/configuration [] Show all the nodes and users visible @@ -3846,20 +3852,20 @@ - 11.131. show/configuration/node (0) + 11.132. show/configuration/node (0) show/configuration/node Show all the nodes connected locally Show all the nodes connected to this node. - 11.132. show/connect (1) + 11.133. show/connect (1) show/connect Show all the active connections This command shows information on all the active connections known tothe node. This command gives slightly more information than WHO. - 11.133. show/date [|] (0) + 11.134. show/date [|] (0) show/date [|] Show the local time @@ -3870,7 +3876,16 @@ show UTC and UTC + the local offset (not including DST) atthe prefixes or callsigns that you specify. - 11.134. show/dx (0) + 11.135. show/db0sdx (0) + + show/db0sdx Show QSL infomation from DB0SDX database + + This command queries the DB0SDX QSL server on the internetand returns + any information available for that callsign. This serviceis provided + for users of this software by http://www.qslinfo.de.See also SHOW/QRZ, + SHOW/WM7D. + + 11.136. show/dx (0) show/dx Interrogate the spot database @@ -3915,12 +3930,11 @@ qra [] - this will look for the specific locator if you specify one or else anything that looks like a locator. - dxcc - treat the prefix as a 'country' and look for spots from that country regardless of actual prefix. eg dxcc oq2 - You can also use this with the 'by' keyword so eg by W dxcc + You can also use this with the 'by' keyword so eg by W dxcc @@ -3932,7 +3946,7 @@ - 11.135. show/dxcc (0) + 11.137. show/dxcc (0) show/dxcc Interrogate the spot database by country @@ -3954,14 +3968,14 @@ - 11.136. show/dxstats [days] [date] (0) + 11.138. show/dxstats [days] [date] (0) show/dxstats [days] [date] Show the DX Statistics Show the total DX spots for the last no of days (default is 31), starting from a (default: today). - 11.137. show/files [ []] (0) + 11.139. show/files [ []] (0) show/files [ []] List the contents of a filearea @@ -3979,28 +3993,27 @@ in astring to see a selection of files in a filearea eg:- - - SH/FILES bulletins arld* + SH/FILES bulletins arld* See also TYPE - to see the contents of a file. - 11.138. show/filter (0) + 11.140. show/filter (0) show/filter Show the contents of all the filters you have set Show the contents of all the filters that are set. This command displaysall the filters set - for all the various categories. - 11.139. show/hfstats [days] [date] (0) + 11.141. show/hfstats [days] [date] (0) show/hfstats [days] [date] Show the HF DX Statistics Show the HF DX spots breakdown by band for the last no of days (default is 31), starting from a (default: today). - 11.140. show/hftable [days] [date] [prefix ...] (0) + 11.142. show/hftable [days] [date] [prefix ...] (0) show/hftable [days] [date] [prefix ...] Show the HF DX Spotter Table @@ -4040,11 +4053,12 @@ printthe worldwide statistics. - sh/hftable all + sh/hftable all - 11.141. show/hops [ann|spots|route|wcy|wwv] (8) + + 11.143. show/hops [ann|spots|route|wcy|wwv] (8) show/hops [ann|spots|route|wcy|wwv] Show the hop counts for a node @@ -4053,12 +4067,12 @@ specifywhich category you want to see. If you leave the category out then all the categories will be listed. - 11.142. show/isolate (1) + 11.144. show/isolate (1) show/isolate Show list of ISOLATED nodes - 11.143. show/log [] (8) + 11.145. show/log [] (8) show/log [] Show excerpts from the system log @@ -4066,7 +4080,7 @@ will output a general logfile. With the optional callsign it willshow output from the log associated with that callsign. - 11.144. show/moon [ndays] [|] (0) + 11.146. show/moon [ndays] [|] (0) show/moon [ndays] [|] Show Moon rise and set times @@ -4103,7 +4117,9 @@ note that the rise and set times are given as the UT times of rise and set on the requested UT day. - 11.145. show/muf [][long] (0) + + + 11.147. show/muf [][long] (0) show/muf [][long] Show the likely propagation to a prefix @@ -4169,7 +4185,7 @@ Itshould be noted that the figures will probably not be very useful, norterrible accurate, but it is included for completeness. - 11.146. show/newconfiguration [] (0) + 11.148. show/newconfiguration [] (0) show/newconfiguration [] Show all the nodes and users visible @@ -4180,13 +4196,13 @@ different formatwhich may not take up quite as much space if you don't have anyloops.BE WARNED: the list that is returned can be VERY long - 11.147. show/newconfiguration/node (0) + 11.149. show/newconfiguration/node (0) show/newconfiguration/node Show all the nodes connected locally Show all the nodes connected to this node in the new format. - 11.148. show/node [ ...] (1) + 11.150. show/node [ ...] (1) show/node [ ...] Show the type and version number of nodes @@ -4194,7 +4210,7 @@ thecommand line. If no callsigns are specified then a sorted list of allthe non-user callsigns known to the system will be displayed. - 11.149. show/prefix (0) + 11.151. show/prefix (0) show/prefix Interrogate the prefix database @@ -4204,7 +4220,7 @@ with the internal country no, the CQ and ITU regions. See also SHOW/DXCC - 11.150. show/program (5) + 11.152. show/program (5) show/program Show the locations of all the included program modules @@ -4212,7 +4228,7 @@ Thisis useful for checking where you think you have loaded a .pm file from. - 11.151. show/qra (0) + 11.153. show/qra (0) show/qra Convert lat/long to a QRA Grid locator @@ -4234,24 +4250,26 @@ argument, forexample:- - SH/QRA 52 41 N 0 58 E + + SH/QRA 52 41 N 0 58 E - 11.152. show/qra [] (0) + 11.154. show/qra [] (0) show/qra [] Show distance between QRA Grid locators - 11.153. show/qrz (0) + 11.155. show/qrz (0) show/qrz Show any callbook details on a callsign This command queries the QRZ callbook server on the internetand returns any information available for that callsign. This serviceis - provided for users of this software by http://www.qrz.com + provided for users of this software by http://www.qrz.com See also + SHOW/WM7D for an alternative. - 11.154. show/route ... (0) + 11.156. show/route ... (0) show/route ... Show the route to the callsign @@ -4263,7 +4281,7 @@ - 11.155. show/satellite [ ] (0) + 11.157. show/satellite [ ] (0) show/satellite [ ] Show tracking data @@ -4282,12 +4300,12 @@ - 11.156. show/station all [] (6) + 11.158. show/station all [] (6) show/station all [] Show list of users in the system - 11.157. show/station [ ..] (0) + 11.159. show/station [ ..] (0) show/station [ ..] Show information about a callsign @@ -4295,14 +4313,14 @@ where)that callsign is connected to the cluster. - SH/ST G1TLH + SH/ST G1TLH - If no callsign is given then show the information for yourself. + If no callsign is given then show the information for yourself. - 11.158. show/sun [ndays] [|] (0) + 11.160. show/sun [ndays] [|] (0) show/sun [ndays] [|] Show sun rise and set times @@ -4338,7 +4356,7 @@ note that the rise and set times are given as the UT times of rise and set on the requested UT day. - 11.159. show/time [|] (0) + 11.161. show/time [|] (0) show/time [|] Show the local time @@ -4347,7 +4365,7 @@ prefixesthen it will show UTC and UTC + the local offset (not including DST) atthe prefixes or callsigns that you specify. - 11.160. show/usdb [call ..] (0) + 11.162. show/usdb [call ..] (0) show/usdb [call ..] Show information held on the FCC Call database @@ -4359,15 +4377,14 @@ - 11.161. show/vhfstats [days] [date] (0) + 11.163. show/vhfstats [days] [date] (0) show/vhfstats [days] [date] Show the VHF DX Statistics Show the VHF DX spots breakdown by band for the last no of days (default is 31), starting from a date (default: today). - - 11.162. show/vhftable [days] [date] [prefix ...] (0) + 11.164. show/vhftable [days] [date] [prefix ...] (0) show/vhftable [days] [date] [prefix ...] Show the VHF DX Spotter Table @@ -4411,37 +4428,48 @@ - 11.163. show/wcy (0) + 11.165. show/wcy (0) show/wcy Show last 10 WCY broadcasts - 11.164. show/wcy (0) + 11.166. show/wcy (0) show/wcy Show last WCY broadcasts Display the most recent WCY information that has been received by the system - 11.165. show/wwv (0) + + + 11.167. show/wm7d (0) + + show/wm7d Show callbook details on a US callsigns + + This command queries the WM7D callbook server on the internetand + returns any information available for that US callsign. This serviceis + provided for users of this software by http://www.wm7d.net.See also + SHOW/QRZ. + + 11.168. show/wwv (0) show/wwv Show last 10 WWV broadcasts - 11.166. show/wwv (0) + 11.169. show/wwv (0) show/wwv Show last WWV broadcasts Display the most recent WWV information that has been received by the system - 11.167. shutdown (5) + 11.170. shutdown (5) shutdown Shutdown the cluster Shutdown the cluster and disconnect all the users - 11.168. stat/channel [] (5) + 11.171. stat/channel [] (5) stat/channel [] Show the status of a channel on the cluster @@ -4449,7 +4477,7 @@ that you are on or else for the callsign that you asked for.Only the fields that are defined (in perl term) will be displayed. - 11.169. stat/db (5) + 11.172. stat/db (5) stat/db Show the status of a database @@ -4457,12 +4485,12 @@ privilege level you will see more or less information. This command is unlikely to be of much use to anyone other than a sysop. - 11.170. stat/msg (1) + 11.173. stat/msg (1) stat/msg Show the status of the message system - 11.171. stat/msg (1) + 11.174. stat/msg (1) stat/msg Show the status of a message @@ -4471,34 +4499,34 @@ etc.If no message number is given then the status of the message system is displayed. - 11.172. stat/route_node (5) + 11.175. stat/route_node (5) stat/route_node Show the data in a Route::Node object - 11.173. stat/route_node all (5) + 11.176. stat/route_node all (5) stat/route_node all Show list of all Route::Node objects - - 11.174. stat/route_user (5) + 11.177. stat/route_user (5) stat/route_user Show the data in a Route::User object - 11.175. stat/route_user all (5) + 11.178. stat/route_user all (5) stat/route_user all Show list of all Route::User objects - 11.176. stat/user [] (5) + 11.179. stat/user [] (5) stat/user [] Show the full status of a user Shows the full contents of a user record including all the secret flagsand stuff.Only the fields that are defined (in perl term) will be displayed. - 11.177. sysop (0) + + 11.180. sysop (0) sysop Regain your privileges if you login remotely @@ -4528,7 +4556,7 @@ offerednumbers but nothing will happen when you input a string. Any match iscase sensitive. - 11.178. talk > [] (0) + 11.181. talk > [] (0) talk > [] Send a text message to another station via a node @@ -4575,12 +4603,12 @@ will send the hftable as you have it to all the people you are cur- rently talking to. - 11.179. talk [] (0) + 11.182. talk [] (0) talk [] Send a text message to another station - 11.180. type / (0) + 11.183. type / (0) type / Look at the contents of a file in one of the fileareas @@ -4597,7 +4625,7 @@ See also SHOW/FILES to see what fileareas are available and a list of content. - 11.181. uncatchup all|[msgno> ...] (5) + 11.184. uncatchup all|[msgno> ...] (5) uncatchup all|[msgno> ...] Unmark a message as sent @@ -4612,7 +4640,6 @@ catchup GB7DJK all catchup GB7DJK 300 301 302 303 500-510 - and to undo what you have just done:- @@ -4623,13 +4650,12 @@ which will arrange for them to be forward candidates again.Order is not important. - 11.182. unset/announce (0) + 11.185. unset/announce (0) unset/announce Stop announce messages coming out on your terminal - - 11.183. unset/anntalk (0) + 11.186. unset/anntalk (0) unset/anntalk Stop talk like announce messages on your terminal @@ -4652,7 +4678,7 @@ allows you to see them again. This is the default. - 11.184. unset/baddx .. (8) + 11.187. unset/baddx .. (8) unset/baddx .. Propagate a dx spot with this callsign again @@ -4674,10 +4700,11 @@ - 11.185. unset/badnode .. (8) + 11.188. unset/badnode .. (8) unset/badnode .. Allow spots from this node again + Setting a callsign as a 'badnode' will prevent spots from that node going any further. They will not be displayed and they will not be sent onto other nodes.The call must be a full eg:- @@ -4694,10 +4721,11 @@ unset/badnode K1TTT + will allow spots from him again.Use with extreme care. This command may well be superceeded by FILTERing. - 11.186. unset/badspotter .. (8) + 11.189. unset/badspotter .. (8) unset/badspotter .. Allow spots from this callsign again @@ -4723,7 +4751,7 @@ will allow spots from him again.Use with extreme care. This command may well be superceded by FILTERing. - 11.187. unset/badword .. (8) + 11.190. unset/badword .. (8) unset/badword .. Propagate things with this word again @@ -4743,20 +4771,19 @@ unset/badword annihilated - will allow text with this word again. - 11.188. unset/beep (0) + 11.191. unset/beep (0) unset/beep Stop beeps for DX and other messages on your terminal - 11.189. unset/dx (0) + 11.192. unset/dx (0) unset/dx Stop DX messages coming out on your terminal - 11.190. unset/dxgrid (0) + 11.193. unset/dxgrid (0) unset/dxgrid Stop QRA Grid Squares on the end of DX announcements @@ -4766,7 +4793,19 @@ cope with this. You can use this command to reset (or set)this feature. - 11.191. unset/echo (0) + 11.194. unset/dxstate (0) + + unset/dxstate Stop US State info on the end of DX announcements + + If the spotter's or spotted's US State is known it is output on the + end of a DX announcement (there is just enough room). A spotter's + state will appear on the RHS of the time (like SET/DXGRID) and the + spotted's State will appear on the LHS of thetime field. Any + information found will override any locator information from + SET/DXGRID.Some user programs cannot cope with this. You can use this + command to reset (or set) this feature. + + 11.195. unset/echo (0) unset/echo Stop the cluster echoing your input @@ -4776,7 +4815,7 @@ setting appropriately. The setting is stored in your user profile.YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25. - 11.192. unset/email (0) + 11.196. unset/email (0) unset/email Stop personal msgs being forwarded by email @@ -4798,12 +4837,12 @@ - 11.193. unset/here (0) + 11.197. unset/here (0) unset/here Tell the system you are absent from your terminal - 11.194. unset/hops ann|spots|route|wwv|wcy (8) + 11.198. unset/hops ann|spots|route|wwv|wcy (8) unset/hops ann|spots|route|wwv|wcy Unset hop count @@ -4825,12 +4864,12 @@ - 11.195. unset/logininfo (0) + 11.199. unset/logininfo (0) unset/logininfo Inform when a station logs out locally - 11.196. unset/privilege (0) + 11.200. unset/privilege (0) unset/privilege Remove any privilege for this session @@ -4839,7 +4878,7 @@ will need toeither logout and login again (if you are on a console) or use theSYSOP command. - 11.197. unset/prompt (0) + 11.201. unset/prompt (0) unset/prompt Set your prompt back to default @@ -4856,45 +4895,45 @@ UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back tonormal. - 11.198. unset/talk (0) + 11.202. unset/talk (0) unset/talk Stop TALK messages coming out on your terminal - 11.199. unset/wcy (0) + + 11.203. unset/wcy (0) unset/wcy Stop WCY messages coming out on your terminal - 11.200. unset/wwv (0) + 11.204. unset/wwv (0) unset/wwv Stop WWV messages coming out on your terminal - 11.201. unset/wx (0) + 11.205. unset/wx (0) unset/wx Stop WX messages coming out on your terminal - 11.202. who (0) + 11.206. who (0) who Show who is physically connected This is a quick listing that shows which callsigns are connected andwhat sort of connection they have - 11.203. wx (0) + 11.207. wx (0) wx Send a weather message to local users - - 11.204. wx full (0) + 11.208. wx full (0) wx full Send a weather message to all cluster users - 11.205. wx sysop (5) + 11.209. wx sysop (5) wx sysop Send a weather message to other clusters only diff --git a/txt/usermanual_en.txt b/txt/usermanual_en.txt index 09dd45cc..6ad8d628 100644 --- a/txt/usermanual_en.txt +++ b/txt/usermanual_en.txt @@ -109,75 +109,79 @@ 12.57 set/beep 12.58 set/dx 12.59 set/dxgrid - 12.60 set/echo - 12.61 set/email ... - 12.62 set/here - 12.63 set/homenode - 12.64 set/language - 12.65 set/location - 12.66 set/logininfo - 12.67 set/name - 12.68 set/page - 12.69 set/password - 12.70 set/prompt - 12.71 set/qra - 12.72 set/qth - 12.73 set/talk - 12.74 set/wcy - 12.75 set/wwv - 12.76 set/wx - 12.77 show/configuration [] - 12.78 show/configuration/node - 12.79 show/date [|] - 12.80 show/dx - 12.81 show/dxcc - 12.82 show/dxstats [days] [date] - 12.83 show/files [ []] - 12.84 show/filter - 12.85 show/hfstats [days] [date] - 12.86 show/hftable [days] [date] [prefix ...] - 12.87 show/moon [ndays] [|] - 12.88 show/muf [][long] - 12.89 show/newconfiguration [] - 12.90 show/newconfiguration/node - 12.91 show/prefix - 12.92 show/qra - 12.93 show/qra [] - 12.94 show/qrz - 12.95 show/route ... - 12.96 show/satellite [ ] - 12.97 show/station [ ..] - 12.98 show/sun [ndays] [|] - 12.99 show/time [|] - 12.100 show/usdb [call ..] - 12.101 show/vhfstats [days] [date] - 12.102 show/vhftable [days] [date] [prefix ...] - 12.103 show/wcy - 12.104 show/wcy - 12.105 show/wwv - 12.106 show/wwv - 12.107 sysop - 12.108 talk > [] - 12.109 talk [] - 12.110 type / - 12.111 unset/announce - 12.112 unset/anntalk - 12.113 unset/beep - 12.114 unset/dx - 12.115 unset/dxgrid - 12.116 unset/echo - 12.117 unset/email - 12.118 unset/here - 12.119 unset/logininfo - 12.120 unset/privilege - 12.121 unset/prompt - 12.122 unset/talk - 12.123 unset/wcy - 12.124 unset/wwv - 12.125 unset/wx - 12.126 who - 12.127 wx - 12.128 wx full + 12.60 set/dxstate + 12.61 set/echo + 12.62 set/email ... + 12.63 set/here + 12.64 set/homenode + 12.65 set/language + 12.66 set/location + 12.67 set/logininfo + 12.68 set/name + 12.69 set/page + 12.70 set/password + 12.71 set/prompt + 12.72 set/qra + 12.73 set/qth + 12.74 set/talk + 12.75 set/wcy + 12.76 set/wwv + 12.77 set/wx + 12.78 show/configuration [] + 12.79 show/configuration/node + 12.80 show/date [|] + 12.81 show/db0sdx + 12.82 show/dx + 12.83 show/dxcc + 12.84 show/dxstats [days] [date] + 12.85 show/files [ []] + 12.86 show/filter + 12.87 show/hfstats [days] [date] + 12.88 show/hftable [days] [date] [prefix ...] + 12.89 show/moon [ndays] [|] + 12.90 show/muf [][long] + 12.91 show/newconfiguration [] + 12.92 show/newconfiguration/node + 12.93 show/prefix + 12.94 show/qra + 12.95 show/qra [] + 12.96 show/qrz + 12.97 show/route ... + 12.98 show/satellite [ ] + 12.99 show/station [ ..] + 12.100 show/sun [ndays] [|] + 12.101 show/time [|] + 12.102 show/usdb [call ..] + 12.103 show/vhfstats [days] [date] + 12.104 show/vhftable [days] [date] [prefix ...] + 12.105 show/wcy + 12.106 show/wcy + 12.107 show/wm7d + 12.108 show/wwv + 12.109 show/wwv + 12.110 sysop + 12.111 talk > [] + 12.112 talk [] + 12.113 type / + 12.114 unset/announce + 12.115 unset/anntalk + 12.116 unset/beep + 12.117 unset/dx + 12.118 unset/dxgrid + 12.119 unset/dxstate + 12.120 unset/echo + 12.121 unset/email + 12.122 unset/here + 12.123 unset/logininfo + 12.124 unset/privilege + 12.125 unset/prompt + 12.126 unset/talk + 12.127 unset/wcy + 12.128 unset/wwv + 12.129 unset/wx + 12.130 who + 12.131 wx + 12.132 wx full ______________________________________________________________________ @@ -200,6 +204,7 @@ Of course, the DX is still posted to you all the while! + 11..22.. SSoo wwhhaatt iiss DDXXSSppiiddeerr?? PacketCluster nodes have been around since roughly 1985. The original @@ -207,6 +212,7 @@ about 1992 Dick stopped the development of the PacketCluster software for amateur radio. Many systems are still using this relatively old DOS software today. + There are several new compatible cluster programs around now, including DXSpider. DXSpider is a clone of PacketCluster software that runs under several operating systems including Linux and Windows. @@ -388,9 +394,9 @@ - show/dx on 20m - show/dx 10 on 20m - show/dx 20 on 20m + show/dx on 20m + show/dx 10 on 20m + show/dx 20 on 20m @@ -457,7 +463,6 @@ information can be found in the Command Set section. - 44..22.. PPoossttiinngg DDXX.. To post DX you use the DDXX command. The syntax is shown below. @@ -510,6 +515,7 @@ return the correct information. + 55..11.. SSuunn The SSHHOOWW//SSUUNN command can be used in three different ways. It can be @@ -520,7 +526,7 @@ - show/sun + show/sun @@ -569,7 +575,6 @@ ZS So-Africa-ZS6-ZS 03:59Z 16:42Z 277.6 35.0 - 55..22.. MMoooonn The SSHHOOWW//MMOOOONN command works in the same way as the SSHHOOWW//SSUUNN command. @@ -638,6 +643,7 @@ EExxaammppllee:: + announce 10 FM is open in IO84NB to europe. @@ -688,10 +694,10 @@ - show/configuration - show/configuration/nodes - show/configuration (node_call) - show/configuration (prefix) + show/configuration + show/configuration/nodes + show/configuration (node_call) + show/configuration (prefix) @@ -699,26 +705,26 @@ - sh/c - Node Callsigns - EI5TCR (7 users) - GB7ADX - GB7BAA G4FPV G8TIC - GB7BIG (GD0TEP) GD3UMW - GB7BPQ (G0INA) G0RCI G3AKU G3OCA - (GB7CDX) G3JNB G4ALR - GB7DJK G0FYD G0REK G1TLH G4PEL G4SOZ - G4TVR G7SQW K8AZ M0CTQ-1 MM1CXE-10 - ON7WP - GB7DXA G0RDI G8SJP - GB7DXC (G0HDB) G0WFK (G1FYC) G3KWK G3LME - G3OIL G4BGW G4FUJ (G4PDQ) GW7SMV - GB7DXE G1NNB - (GB7DXG) GU6EFB GU7DHI - GB7DXK G1NTW G3IBI G3NSM G3XAQ G4CUS - G4XQY G7GAN - GB7DXM G1EUC G3GAF G3LAS G4ZTR G8WXU - M0BCT M1EMF + sh/c + Node Callsigns + EI5TCR (7 users) + GB7ADX + GB7BAA G4FPV G8TIC + GB7BIG (GD0TEP) GD3UMW + GB7BPQ (G0INA) G0RCI G3AKU G3OCA + (GB7CDX) G3JNB G4ALR + GB7DJK G0FYD G0REK G1TLH G4PEL G4SOZ + G4TVR G7SQW K8AZ M0CTQ-1 MM1CXE-10 + ON7WP + GB7DXA G0RDI G8SJP + GB7DXC (G0HDB) G0WFK (G1FYC) G3KWK G3LME + G3OIL G4BGW G4FUJ (G4PDQ) GW7SMV + GB7DXE G1NNB + (GB7DXG) GU6EFB GU7DHI + GB7DXK G1NTW G3IBI G3NSM G3XAQ G4CUS + G4XQY G7GAN + GB7DXM G1EUC G3GAF G3LAS G4ZTR G8WXU + M0BCT M1EMF @@ -751,12 +757,12 @@ - Node Callsigns - PI4TUE-8 9A1CMA-6 DF6PW DL4FAY DL4KAK DL4WF-2 - F5NOD-2 F5PAC IZ0CSR N6CR OH2BLD - ON1LVL-13 ON4CBT ON4CJP ON5DXL-14 ON7NQ - PA0RCT PA3DYS PA3FDO PA5KW-4 PI4TUE-9 - YT1XX + Node Callsigns + PI4TUE-8 9A1CMA-6 DF6PW DL4FAY DL4KAK DL4WF-2 + F5NOD-2 F5PAC IZ0CSR N6CR OH2BLD + ON1LVL-13 ON4CBT ON4CJP ON5DXL-14 ON7NQ + PA0RCT PA3DYS PA3FDO PA5KW-4 PI4TUE-9 + YT1XX @@ -812,7 +818,6 @@ talk g0rdi Having a good day Iain? - This example would send the line "Having a good day Iain?" to the user g0rdi but would leave you in normal mode. @@ -823,6 +828,7 @@ Talk (G0RDI)> + As you can see, you can still run commands whilst in talk mode. Simply prefix the command with a / like /sh/dx and you will get the expected output. If the user is connected to another node, you may @@ -937,7 +943,6 @@ it's entirety unless you specify a page length. You can set your page length to any number you like and when the message reaches that number of lines you will get a prompt giving you options. - EExxaammppllee:: @@ -998,8 +1003,6 @@ To delete a message, you use the _d_e_l_e_t_e command. You can only delete messages sent to or received by yourself. Bulletins are dealt with automatically or by the sysop. - - 1100.. FFiilltteerriinngg ((FFrroomm vveerrssiioonn 11..4455)) 1100..11.. GGeenneerraall ffiilltteerr rruulleess @@ -1058,6 +1061,7 @@ the same principles to all types of filter. + 1100..22.. TTyyppeess ooff ffiilltteerr There are two main types of filter, _a_c_c_e_p_t or _r_e_j_e_c_t. You can use @@ -1120,9 +1124,6 @@ You can arrange your filter lines into logical units, either for your own understanding or simply convenience. Here is an example ... - - - reject/spots 1 on hf/cw reject/spots 2 on 50000/1400000 not (by_zone 14,15,16 or call_zone 14,15,16) @@ -1130,6 +1131,8 @@ What this does is to ignore all HF CW spots and also rejects any spots on VHF which don't either originate or spot someone in Europe. + + This is an example where you would use a line number (1 and 2 in this case), if you leave the digit out, the system assumes '1'. Digits '0'-'9' are available. This make it easier to see just what filters @@ -1188,7 +1191,6 @@ the various helpfiles for accept, reject and filter. - 1100..44.. AAddvvaanncceedd ffiilltteerriinngg Once you are happy with the results you get, you may like to @@ -1253,7 +1255,6 @@ AA..Use the SSEETT//BBEEEEPP command. You can find information on this in the "DXSpider Command Reference" section. - QQ..I got disconnected from the cluster and now I can't log back in again. What is wrong? @@ -1319,9 +1320,9 @@ - acc/ann dest 6MUK - acc/ann 2 by_zone 14,15,16 - (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16) + acc/ann dest 6MUK + acc/ann 2 by_zone 14,15,16 + (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16) @@ -2490,25 +2491,31 @@ - 1122..6600.. sseett//eecchhoo + 1122..6600.. sseett//ddxxssttaattee + + sseett//ddxxssttaattee Allow US State info on the end of DX announcements + + + + 1122..6611.. sseett//eecchhoo sseett//eecchhoo Make the cluster echo your input - 1122..6611.. sseett//eemmaaiill <> ...... + 1122..6622.. sseett//eemmaaiill <> ...... sseett//eemmaaiill <> ...... Set email address(es) and forward your personals - 1122..6622.. sseett//hheerree + 1122..6633.. sseett//hheerree sseett//hheerree Tell the system you are present at your terminal - 1122..6633.. sseett//hhoommeennooddee <> + 1122..6644.. sseett//hhoommeennooddee <> sseett//hhoommeennooddee <> Set your normal cluster callsign @@ -2522,7 +2529,7 @@ - 1122..6644.. sseett//llaanngguuaaggee <> + 1122..6655.. sseett//llaanngguuaaggee <> sseett//llaanngguuaaggee <> Set the language you want to use @@ -2531,19 +2538,19 @@ Currently the languages available are en (English), de (German), es (Spanish) and nl (Dutch). - 1122..6655.. sseett//llooccaattiioonn <> + 1122..6666.. sseett//llooccaattiioonn <> sseett//llooccaattiioonn <> Set your latitude and longitude - 1122..6666.. sseett//llooggiinniinnffoo + 1122..6677.. sseett//llooggiinniinnffoo sseett//llooggiinniinnffoo Inform when a station logs in locally - 1122..6677.. sseett//nnaammee <> + 1122..6688.. sseett//nnaammee <> sseett//nnaammee <> Set your name @@ -2554,7 +2561,8 @@ SET/NAME Dirk - 1122..6688.. sseett//ppaaggee <> + + 1122..6699.. sseett//ppaaggee <> sseett//ppaaggee <> Set the lines per page @@ -2571,7 +2579,7 @@ The setting is stored in your user profile. - 1122..6699.. sseett//ppaasssswwoorrdd + 1122..7700.. sseett//ppaasssswwoorrdd sseett//ppaasssswwoorrdd Set your own password @@ -2585,13 +2593,13 @@ it right). You may or may not see the data echoed on the screen as you type, depending on the type of telnet client you have. - 1122..7700.. sseett//pprroommpptt <> + 1122..7711.. sseett//pprroommpptt <> sseett//pprroommpptt <> Set your prompt to - 1122..7711.. sseett//qqrraa <> + 1122..7722.. sseett//qqrraa <> sseett//qqrraa <> Set your QRA Grid locator @@ -2605,7 +2613,7 @@ - 1122..7722.. sseett//qqtthh <> + 1122..7733.. sseett//qqtthh <> sseett//qqtthh <> Set your QTH @@ -2617,31 +2625,31 @@ - 1122..7733.. sseett//ttaallkk + 1122..7744.. sseett//ttaallkk sseett//ttaallkk Allow TALK messages to come out on your terminal - 1122..7744.. sseett//wwccyy + 1122..7755.. sseett//wwccyy sseett//wwccyy Allow WCY messages to come out on your terminal - 1122..7755.. sseett//wwwwvv + 1122..7766.. sseett//wwwwvv sseett//wwwwvv Allow WWV messages to come out on your terminal - 1122..7766.. sseett//wwxx + 1122..7777.. sseett//wwxx sseett//wwxx Allow WX messages to come out on your terminal - 1122..7777.. sshhooww//ccoonnffiigguurraattiioonn [[<>]] + 1122..7788.. sshhooww//ccoonnffiigguurraattiioonn [[<>]] sshhooww//ccoonnffiigguurraattiioonn [[<>]] Show all the nodes and users visible @@ -2668,8 +2676,6 @@ list of the users for that node or list of nodes starting with that prefix. - - SH/C GB7DJK @@ -2678,14 +2684,14 @@ - 1122..7788.. sshhooww//ccoonnffiigguurraattiioonn//nnooddee + 1122..7799.. sshhooww//ccoonnffiigguurraattiioonn//nnooddee sshhooww//ccoonnffiigguurraattiioonn//nnooddee Show all the nodes connected locally Show all the nodes connected to this node. - 1122..7799.. sshhooww//ddaattee [[<>||<>]] + 1122..8800.. sshhooww//ddaattee [[<>||<>]] sshhooww//ddaattee [[<>||<>]] Show the local time @@ -2698,7 +2704,18 @@ prefixes then it will show UTC and UTC + the local offset (not including DST) at the prefixes or callsigns that you specify. - 1122..8800.. sshhooww//ddxx + 1122..8811.. sshhooww//ddbb00ssddxx <> + + sshhooww//ddbb00ssddxx <> Show QSL infomation from DB0SDX database + + + This command queries the DB0SDX QSL server on the internet and returns + any information available for that callsign. This service is provided + for users of this software by http://www.qslinfo.de. + + See also SHOW/QRZ, SHOW/WM7D. + + 1122..8822.. sshhooww//ddxx sshhooww//ddxx Interrogate the spot database @@ -2735,6 +2752,7 @@ / + info - any spots containing in the info or remarks @@ -2776,19 +2794,19 @@ - SH/DX 9m0 - SH/DX on 20m info iota - SH/DX 9a on vhf day 30 - SH/DX rf1p qsl - SH/DX iota - SH/DX iota eu-064 - SH/DX qra jn86 - SH/DX dxcc oq2 - SH/DX dxcc oq2 by w dxcc + SH/DX 9m0 + SH/DX on 20m info iota + SH/DX 9a on vhf day 30 + SH/DX rf1p qsl + SH/DX iota + SH/DX iota eu-064 + SH/DX qra jn86 + SH/DX dxcc oq2 + SH/DX dxcc oq2 by w dxcc - 1122..8811.. sshhooww//ddxxcccc <> + 1122..8833.. sshhooww//ddxxcccc <> sshhooww//ddxxcccc <> Interrogate the spot database by country @@ -2815,9 +2833,7 @@ SH/DX dxcc g SH/DX dxcc w on 20m iota - - - 1122..8822.. sshhooww//ddxxssttaattss [[ddaayyss]] [[ddaattee]] + 1122..8844.. sshhooww//ddxxssttaattss [[ddaayyss]] [[ddaattee]] sshhooww//ddxxssttaattss [[ddaayyss]] [[ddaattee]] Show the DX Statistics @@ -2825,7 +2841,7 @@ Show the total DX spots for the last no of days (default is 31), starting from a (default: today). - 1122..8833.. sshhooww//ffiilleess [[<> [[<>]]]] + 1122..8855.. sshhooww//ffiilleess [[<> [[<>]]]] sshhooww//ffiilleess [[<> [[<>]]]] List the contents of a filearea @@ -2837,6 +2853,8 @@ SH/FILES + + where is the name of the filearea you want to see the con- tents of. @@ -2850,7 +2868,7 @@ See also TYPE - to see the contents of a file. - 1122..8844.. sshhooww//ffiilltteerr + 1122..8866.. sshhooww//ffiilltteerr sshhooww//ffiilltteerr Show the contents of all the filters you have set @@ -2858,7 +2876,7 @@ Show the contents of all the filters that are set. This command displays all the filters set - for all the various categories. - 1122..8855.. sshhooww//hhffssttaattss [[ddaayyss]] [[ddaattee]] + 1122..8877.. sshhooww//hhffssttaattss [[ddaayyss]] [[ddaattee]] sshhooww//hhffssttaattss [[ddaayyss]] [[ddaattee]] Show the HF DX Statistics @@ -2866,7 +2884,7 @@ Show the HF DX spots breakdown by band for the last no of days (default is 31), starting from a (default: today). - 1122..8866.. sshhooww//hhffttaabbllee [[ddaayyss]] [[ddaattee]] [[pprreeffiixx ......]] + 1122..8888.. sshhooww//hhffttaabbllee [[ddaayyss]] [[ddaattee]] [[pprreeffiixx ......]] sshhooww//hhffttaabbllee [[ddaayyss]] [[ddaattee]] [[pprreeffiixx ......]] Show the HF DX Spotter Table @@ -2923,7 +2941,7 @@ - 1122..8877.. sshhooww//mmoooonn [[nnddaayyss]] [[<>||<>]] + 1122..8899.. sshhooww//mmoooonn [[nnddaayyss]] [[<>||<>]] sshhooww//mmoooonn [[nnddaayyss]] [[<>||<>]] Show Moon rise and set times @@ -2940,7 +2958,6 @@ If all else fails it will show the Moonrise and set times for the node that you are connected to. - For example:- @@ -2972,7 +2989,7 @@ Please note that the rise and set times are given as the UT times of rise and set on the requested UT day. - 1122..8888.. sshhooww//mmuuff <> [[<>]][[lloonngg]] + 1122..9900.. sshhooww//mmuuff <> [[<>]][[lloonngg]] sshhooww//mmuuff <> [[<>]][[lloonngg]] Show the likely propagation to a prefix @@ -3004,7 +3021,6 @@ (Zen) and the likely signal strengths. Then for each frequency for which the system thinks there is a likelihood of a circuit it prints a value. - The value is currently a likely S meter reading based on the conventional 6dB / S point scale. If the value has a '+' appended it means that it is 1/2 an S point stronger. If the value is preceeded by @@ -3023,6 +3039,8 @@ produces: + + RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21 Power : 20 dBW Distance: 6283 km Delay: 22.4 ms Location Lat / Long Azim @@ -3059,11 +3077,12 @@ should be noted that the figures will probably not be very useful, nor terrible accurate, but it is included for completeness. - 1122..8899.. sshhooww//nneewwccoonnffiigguurraattiioonn [[<>]] + 1122..9911.. sshhooww//nneewwccoonnffiigguurraattiioonn [[<>]] sshhooww//nneewwccoonnffiigguurraattiioonn [[<>]] Show all the nodes and users visible + This command allows you to see all the users that can be seen and the nodes to which they are connected. @@ -3074,14 +3093,14 @@ BE WARNED: the list that is returned can be VERY long - 1122..9900.. sshhooww//nneewwccoonnffiigguurraattiioonn//nnooddee + 1122..9922.. sshhooww//nneewwccoonnffiigguurraattiioonn//nnooddee sshhooww//nneewwccoonnffiigguurraattiioonn//nnooddee Show all the nodes connected locally Show all the nodes connected to this node in the new format. - 1122..9911.. sshhooww//pprreeffiixx <> + 1122..9933.. sshhooww//pprreeffiixx <> sshhooww//pprreeffiixx <> Interrogate the prefix database @@ -3093,7 +3112,7 @@ See also SHOW/DXCC - 1122..9922.. sshhooww//qqrraa <> <> + 1122..9944.. sshhooww//qqrraa <> <> sshhooww//qqrraa <> <> Convert lat/long to a QRA Grid locator @@ -3125,13 +3144,13 @@ - 1122..9933.. sshhooww//qqrraa <> [[<>]] + 1122..9955.. sshhooww//qqrraa <> [[<>]] sshhooww//qqrraa <> [[<>]] Show distance between QRA Grid locators - 1122..9944.. sshhooww//qqrrzz <> + 1122..9966.. sshhooww//qqrrzz <> sshhooww//qqrrzz <> Show any callbook details on a callsign @@ -3140,7 +3159,9 @@ returns any information available for that callsign. This service is provided for users of this software by http://www.qrz.com - 1122..9955.. sshhooww//rroouuttee <> ...... + See also SHOW/WM7D for an alternative. + + 1122..9977.. sshhooww//rroouuttee <> ...... sshhooww//rroouuttee <> ...... Show the route to the callsign @@ -3149,11 +3170,12 @@ are connected. It is a sort of inverse sh/config. + sh/route n2tly - 1122..9966.. sshhooww//ssaatteelllliittee <> [[<> <>]] + 1122..9988.. sshhooww//ssaatteelllliittee <> [[<> <>]] sshhooww//ssaatteelllliittee <> [[<> <>]] Show tracking data @@ -3183,7 +3205,7 @@ - 1122..9977.. sshhooww//ssttaattiioonn [[<> ....]] + 1122..9999.. sshhooww//ssttaattiioonn [[<> ....]] sshhooww//ssttaattiioonn [[<> ....]] Show information about a callsign @@ -3199,7 +3221,7 @@ If no callsign is given then show the information for yourself. - 1122..9988.. sshhooww//ssuunn [[nnddaayyss]] [[<>||<>]] + 1122..110000.. sshhooww//ssuunn [[nnddaayyss]] [[<>||<>]] sshhooww//ssuunn [[nnddaayyss]] [[<>||<>]] Show sun rise and set times @@ -3245,8 +3267,7 @@ Please note that the rise and set times are given as the UT times of rise and set on the requested UT day. - - 1122..9999.. sshhooww//ttiimmee [[<>||<>]] + 1122..110011.. sshhooww//ttiimmee [[<>||<>]] sshhooww//ttiimmee [[<>||<>]] Show the local time @@ -3256,7 +3277,7 @@ prefixes then it will show UTC and UTC + the local offset (not including DST) at the prefixes or callsigns that you specify. - 1122..110000.. sshhooww//uussddbb [[ccaallll ....]] + 1122..110022.. sshhooww//uussddbb [[ccaallll ....]] sshhooww//uussddbb [[ccaallll ....]] Show information held on the FCC Call database @@ -3270,7 +3291,7 @@ - 1122..110011.. sshhooww//vvhhffssttaattss [[ddaayyss]] [[ddaattee]] + 1122..110033.. sshhooww//vvhhffssttaattss [[ddaayyss]] [[ddaattee]] sshhooww//vvhhffssttaattss [[ddaayyss]] [[ddaattee]] Show the VHF DX Statistics @@ -3278,7 +3299,7 @@ Show the VHF DX spots breakdown by band for the last no of days (default is 31), starting from a date (default: today). - 1122..110022.. sshhooww//vvhhffttaabbllee [[ddaayyss]] [[ddaattee]] [[pprreeffiixx ......]] + 1122..110044.. sshhooww//vvhhffttaabbllee [[ddaayyss]] [[ddaattee]] [[pprreeffiixx ......]] sshhooww//vvhhffttaabbllee [[ddaayyss]] [[ddaattee]] [[pprreeffiixx ......]] Show the VHF DX Spotter Table @@ -3309,8 +3330,6 @@ sh/vhftable 20 pa - - If you want to start at a different day, simply add the date in some recognizable form:- @@ -3333,13 +3352,15 @@ sh/vhftable all - 1122..110033.. sshhooww//wwccyy + + + 1122..110055.. sshhooww//wwccyy sshhooww//wwccyy Show last 10 WCY broadcasts - 1122..110044.. sshhooww//wwccyy <> + 1122..110066.. sshhooww//wwccyy <> sshhooww//wwccyy <> Show last WCY broadcasts @@ -3347,21 +3368,32 @@ Display the most recent WCY information that has been received by the system - 1122..110055.. sshhooww//wwwwvv + + 1122..110077.. sshhooww//wwmm77dd <> + + sshhooww//wwmm77dd <> Show callbook details on a US callsigns + + + This command queries the WM7D callbook server on the internet and + returns any information available for that US callsign. This service + is provided for users of this software by http://www.wm7d.net. + + See also SHOW/QRZ. + + 1122..110088.. sshhooww//wwwwvv sshhooww//wwwwvv Show last 10 WWV broadcasts - 1122..110066.. sshhooww//wwwwvv <> + 1122..110099.. sshhooww//wwwwvv <> sshhooww//wwwwvv <> Show last WWV broadcasts Display the most recent WWV information that has been received by the system - - 1122..110077.. ssyyssoopp + 1122..111100.. ssyyssoopp ssyyssoopp Regain your privileges if you login remotely @@ -3399,7 +3431,7 @@ numbers but nothing will happen when you input a string. Any match is case sensitive. - 1122..110088.. ttaallkk <> >> <> [[<>]] + 1122..111111.. ttaallkk <> >> <> [[<>]] ttaallkk <> >> <> [[<>]] Send a text message to another station via a node @@ -3425,7 +3457,6 @@ All the usual announcements, spots and so on will still come out on your terminal. - If you want to do something (such as send a spot) you preceed the normal command with a '/' character, eg:- @@ -3457,15 +3488,13 @@ will send the hftable as you have it to all the people you are currently talking to. - - - 1122..110099.. ttaallkk <> [[<>]] + 1122..111122.. ttaallkk <> [[<>]] ttaallkk <> [[<>]] Send a text message to another station - 1122..111100.. ttyyppee <>//<> + 1122..111133.. ttyyppee <>//<> ttyyppee <>//<> Look at the contents of a file in one of the fileareas @@ -3483,13 +3512,13 @@ See also SHOW/FILES to see what fileareas are available and a list of content. - 1122..111111.. uunnsseett//aannnnoouunnccee + 1122..111144.. uunnsseett//aannnnoouunnccee uunnsseett//aannnnoouunnccee Stop announce messages coming out on your terminal - 1122..111122.. uunnsseett//aannnnttaallkk + 1122..111155.. uunnsseett//aannnnttaallkk uunnsseett//aannnnttaallkk Stop talk like announce messages on your terminal @@ -3515,19 +3544,19 @@ allows you to see them again. This is the default. - 1122..111133.. uunnsseett//bbeeeepp + 1122..111166.. uunnsseett//bbeeeepp uunnsseett//bbeeeepp Stop beeps for DX and other messages on your terminal - 1122..111144.. uunnsseett//ddxx + 1122..111177.. uunnsseett//ddxx uunnsseett//ddxx Stop DX messages coming out on your terminal - 1122..111155.. uunnsseett//ddxxggrriidd + 1122..111188.. uunnsseett//ddxxggrriidd uunnsseett//ddxxggrriidd Stop QRA Grid Squares on the end of DX announcements @@ -3538,7 +3567,22 @@ cope with this. You can use this command to reset (or set) this feature. - 1122..111166.. uunnsseett//eecchhoo + 1122..111199.. uunnsseett//ddxxssttaattee + + uunnsseett//ddxxssttaattee Stop US State info on the end of DX announcements + + + If the spotter's or spotted's US State is known it is output on the + end of a DX announcement (there is just enough room). + + A spotter's state will appear on the RHS of the time (like SET/DXGRID) + and the spotted's State will appear on the LHS of the time field. Any + information found will override any locator information from + SET/DXGRID. + + Some user programs cannot cope with this. You can use this command to + reset (or set) this feature. + 1122..112200.. uunnsseett//eecchhoo uunnsseett//eecchhoo Stop the cluster echoing your input @@ -3552,7 +3596,7 @@ YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25. - 1122..111177.. uunnsseett//eemmaaiill + 1122..112211.. uunnsseett//eemmaaiill uunnsseett//eemmaaiill Stop personal msgs being forwarded by email @@ -3578,19 +3622,19 @@ - 1122..111188.. uunnsseett//hheerree + 1122..112222.. uunnsseett//hheerree uunnsseett//hheerree Tell the system you are absent from your terminal - 1122..111199.. uunnsseett//llooggiinniinnffoo + 1122..112233.. uunnsseett//llooggiinniinnffoo uunnsseett//llooggiinniinnffoo Inform when a station logs out locally - 1122..112200.. uunnsseett//pprriivviilleeggee + 1122..112244.. uunnsseett//pprriivviilleeggee uunnsseett//pprriivviilleeggee Remove any privilege for this session @@ -3600,7 +3644,8 @@ either logout and login again (if you are on a console) or use the SYSOP command. - 1122..112211.. uunnsseett//pprroommpptt + + 1122..112255.. uunnsseett//pprroommpptt uunnsseett//pprroommpptt Set your prompt back to default @@ -3619,46 +3664,45 @@ UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back to normal. - 1122..112222.. uunnsseett//ttaallkk + 1122..112266.. uunnsseett//ttaallkk uunnsseett//ttaallkk Stop TALK messages coming out on your terminal - 1122..112233.. uunnsseett//wwccyy + 1122..112277.. uunnsseett//wwccyy uunnsseett//wwccyy Stop WCY messages coming out on your terminal - 1122..112244.. uunnsseett//wwwwvv + 1122..112288.. uunnsseett//wwwwvv uunnsseett//wwwwvv Stop WWV messages coming out on your terminal - 1122..112255.. uunnsseett//wwxx + 1122..112299.. uunnsseett//wwxx uunnsseett//wwxx Stop WX messages coming out on your terminal - 1122..112266.. wwhhoo + 1122..113300.. wwhhoo wwhhoo Show who is physically connected - This is a quick listing that shows which callsigns are connected and what sort of connection they have - 1122..112277.. wwxx <> + 1122..113311.. wwxx <> wwxx <> Send a weather message to local users - 1122..112288.. wwxx ffuullll <> + 1122..113322.. wwxx ffuullll <> wwxx ffuullll <> Send a weather message to all cluster users -- 2.34.1