make additions and changes to manuals

[spider.git] / txt / spiderCVS.txt

diff --git a/txt/spiderCVS.txt b/txt/spiderCVS.txt
index 8a2a11153a834a3df6f4e9c2679506b157008da7..3532d369d14bd331cee9aad8aabe033fd9b0d5f2 100644 (file)
--- a/txt/spiderCVS.txt
+++ b/txt/spiderCVS.txt
@@ -1,103 +1,37 @@
   The DXSpider CVS Changes addendum
   Ian Maude, G0VGS, (ianmaude@btinternet.com)
-  Version 0.1 March 2001
+  Version 1.50 July 2002
 
   A reference for CVS users of the DXSpider DXCluster program.
 
   If you have any problems with a new CVS version please mail the
-  support list or come and report on WW Convers channel 9000 or from a
-  44 host to sys2.pa4ab.ampr.org (44.137.44.16) port 6667 (IRC) and join
-  #9000.
+  support list.
 
 
-  The latest CVS is version 1.47.  There are major changes going on
-  currently as the code is altered to allow DXSpider to be run under
-  Microsoft Windows.
+  The latest CVS is version 1.50 build 57.002.  There are major changes
+  going on currently as the code is being prepared for New Protocol.
 
-  There is a separate file for the Windows installation in the
-  /spider/html and /spider/txt directories so I will not include that
-  here.
 
-  For Linux users, there are several steps to complete to update from
-  version 1.46.
+  There are currently no addenda, please look to the /spider/Changes
+  file for any small alterations.
 
-  PLEASE READ ALL THE FOLLOWING BEFORE STARTING
 
 
-  +\bo  tar up your existing perl and cmd directories and put them
-     somewhere safe so you can revert to the old version if necessary.
 
-  +\bo  Do a CVS update in the normal way (cvs update -d)
 
-  +\bo  cp /spider/perl/Listeners.pm to /spider/local and edit it as below
 
-  +\bo  comment out the spdlogin line in inetd.conf and 'killall -HUP
-     inetd'
 
-  +\bo  "make" the client in /spider/src (just in case it has changed)
 
-  +\bo  restart the cluster and pray :-)
 
-  The Listeners.pm file looks something like this ...
 
 
 
-       #
-       # Copy this file to /spider/local and modify it to your requirements
-       #
-       #
-       # This file specifies which local interfaces and ports you will be
-       # listening on
-       #
-       # You can add as many as you like
-       #
 
-       package main;
 
-       use vars qw(@listen);
 
-       @listen = (
-       #                  ["localhost", 7300],
-       #                  ["foo.dxcluster.net", 7300],
-                         );
 
-       1;
 
 
-  Alter the hostnames and ports to reflect you setup.  This file is only
-  used for incoming telnet requests.  You do not have to use hostnames,
-  it is quite ok to use IP addresses and it is also a matter of choice
-  whether or not you add the domain.
-
-  Here is an example of a working Listeners.pm file ..
-
-
-
-       @listen = (
-                          ["localhost", 8000],
-                          ["sys2", 8000],
-                          ["apu", 8000],
-                         );
-
-
-
-
-  Now all this is well and good if you have a static IP address.  If
-  your IP address is dynamic then one line will do, like this ...
-
-
-
-       @listen = (
-                          ["0.0.0.0", 8000],
-                         );
-
-
-
-
-  From this version, the file client.pl has ceased to be needed.  In
-  fact it has been removed.  If you are still using client.pl in your
-  ax25d.conf then replace it with /spider/src/client.
-