11.102 set/dx (0)
11.103 set/dxgrid (0)
11.104 set/dxnet <call> [<call>..] (5)
- 11.105 set/echo (0)
- 11.106 set/email <email> ... (0)
- 11.107 set/here (0)
- 11.108 set/homenode <node> (0)
- 11.109 set/hops <call> ann|spots|route|wwv|wcy <n> (8)
- 11.110 set/language <lang> (0)
- 11.111 set/location <lat & long> (0)
- 11.112 set/logininfo (0)
- 11.113 set/name <your name> (0)
- 11.114 set/node <call> [<call>..] (5)
- 11.115 set/obscount <count> <call> (8)
- 11.116 set/page <lines per page> (0)
- 11.117 set/password (0)
- 11.118 set/prompt <string> (0)
- 11.119 set/qra <locator> (0)
- 11.120 set/qth <your qth> (0)
- 11.121 set/spider <call> [<call>..] (5)
- 11.122 set/talk (0)
- 11.123 set/wcy (0)
- 11.124 set/wwv (0)
- 11.125 set/wx (0)
- 11.126 show/baddx (1)
- 11.127 show/badnode (1)
- 11.128 show/badspotter (1)
- 11.129 show/badword (1)
- 11.130 show/configuration [<node>] (0)
- 11.131 show/configuration/node (0)
- 11.132 show/connect (1)
- 11.133 show/date [<prefix>|<callsign>] (0)
- 11.134 show/dx (0)
- 11.135 show/dxcc <prefix> (0)
- 11.136 show/dxstats [days] [date] (0)
- 11.137 show/files [<filearea> [<string>]] (0)
- 11.138 show/filter (0)
- 11.139 show/hfstats [days] [date] (0)
- 11.140 show/hftable [days] [date] [prefix ...] (0)
- 11.141 show/hops <call> [ann|spots|route|wcy|wwv] (8)
- 11.142 show/isolate (1)
- 11.143 show/log [<callsign>] (8)
- 11.144 show/moon [ndays] [<prefix>|<callsign>] (0)
- 11.145 show/muf <prefix> [<hours>][long] (0)
- 11.146 show/newconfiguration [<node>] (0)
- 11.147 show/newconfiguration/node (0)
- 11.148 show/node [<callsign> ...] (1)
- 11.149 show/prefix <callsign> (0)
- 11.150 show/program (5)
- 11.151 show/qra <lat> <long> (0)
- 11.152 show/qra <locator> [<locator>] (0)
- 11.153 show/qrz <callsign> (0)
- 11.154 show/route <callsign> ... (0)
- 11.155 show/satellite <name> [<hours> <interval>] (0)
- 11.156 show/station all [<regex>] (6)
- 11.157 show/station [<callsign> ..] (0)
- 11.158 show/sun [ndays] [<prefix>|<callsign>] (0)
- 11.159 show/time [<prefix>|<callsign>] (0)
- 11.160 show/usdb [call ..] (0)
- 11.161 show/vhfstats [days] [date] (0)
- 11.162 show/vhftable [days] [date] [prefix ...] (0)
- 11.163 show/wcy (0)
- 11.164 show/wcy <n> (0)
- 11.165 show/wwv (0)
- 11.166 show/wwv <n> (0)
- 11.167 shutdown (5)
- 11.168 stat/channel [<callsign>] (5)
- 11.169 stat/db <dbname> (5)
- 11.170 stat/msg (1)
- 11.171 stat/msg <msgno> (1)
- 11.172 stat/route_node <callsign> (5)
- 11.173 stat/route_node all (5)
- 11.174 stat/route_user <callsign> (5)
- 11.175 stat/route_user all (5)
- 11.176 stat/user [<callsign>] (5)
- 11.177 sysop (0)
- 11.178 talk <call> > <node> [<text>] (0)
- 11.179 talk <call> [<text>] (0)
- 11.180 type <filearea>/<name> (0)
- 11.181 uncatchup <node call> all|[msgno> ...] (5)
- 11.182 unset/announce (0)
- 11.183 unset/anntalk (0)
- 11.184 unset/baddx <call>.. (8)
- 11.185 unset/badnode <call>.. (8)
- 11.186 unset/badspotter <call>.. (8)
- 11.187 unset/badword <word>.. (8)
- 11.188 unset/beep (0)
- 11.189 unset/dx (0)
- 11.190 unset/dxgrid (0)
- 11.191 unset/echo (0)
- 11.192 unset/email (0)
- 11.193 unset/here (0)
- 11.194 unset/hops <call> ann|spots|route|wwv|wcy (8)
- 11.195 unset/logininfo (0)
- 11.196 unset/privilege (0)
- 11.197 unset/prompt (0)
- 11.198 unset/talk (0)
- 11.199 unset/wcy (0)
- 11.200 unset/wwv (0)
- 11.201 unset/wx (0)
- 11.202 who (0)
- 11.203 wx <text> (0)
- 11.204 wx full <text> (0)
- 11.205 wx sysop <text> (5)
+ 11.105 set/dxstate (0)
+ 11.106 set/echo (0)
+ 11.107 set/email <email> ... (0)
+ 11.108 set/here (0)
+ 11.109 set/homenode <node> (0)
+ 11.110 set/hops <call> ann|spots|route|wwv|wcy <n> (8)
+ 11.111 set/language <lang> (0)
+ 11.112 set/location <lat & long> (0)
+ 11.113 set/logininfo (0)
+ 11.114 set/name <your name> (0)
+ 11.115 set/node <call> [<call>..] (5)
+ 11.116 set/obscount <count> <call> (8)
+ 11.117 set/page <lines per page> (0)
+ 11.118 set/password (0)
+ 11.119 set/prompt <string> (0)
+ 11.120 set/qra <locator> (0)
+ 11.121 set/qth <your qth> (0)
+ 11.122 set/spider <call> [<call>..] (5)
+ 11.123 set/talk (0)
+ 11.124 set/wcy (0)
+ 11.125 set/wwv (0)
+ 11.126 set/wx (0)
+ 11.127 show/baddx (1)
+ 11.128 show/badnode (1)
+ 11.129 show/badspotter (1)
+ 11.130 show/badword (1)
+ 11.131 show/configuration [<node>] (0)
+ 11.132 show/configuration/node (0)
+ 11.133 show/connect (1)
+ 11.134 show/date [<prefix>|<callsign>] (0)
+ 11.135 show/db0sdx <callsign> (0)
+ 11.136 show/dx (0)
+ 11.137 show/dxcc <prefix> (0)
+ 11.138 show/dxstats [days] [date] (0)
+ 11.139 show/files [<filearea> [<string>]] (0)
+ 11.140 show/filter (0)
+ 11.141 show/hfstats [days] [date] (0)
+ 11.142 show/hftable [days] [date] [prefix ...] (0)
+ 11.143 show/hops <call> [ann|spots|route|wcy|wwv] (8)
+ 11.144 show/isolate (1)
+ 11.145 show/log [<callsign>] (8)
+ 11.146 show/moon [ndays] [<prefix>|<callsign>] (0)
+ 11.147 show/muf <prefix> [<hours>][long] (0)
+ 11.148 show/newconfiguration [<node>] (0)
+ 11.149 show/newconfiguration/node (0)
+ 11.150 show/node [<callsign> ...] (1)
+ 11.151 show/prefix <callsign> (0)
+ 11.152 show/program (5)
+ 11.153 show/qra <lat> <long> (0)
+ 11.154 show/qra <locator> [<locator>] (0)
+ 11.155 show/qrz <callsign> (0)
+ 11.156 show/route <callsign> ... (0)
+ 11.157 show/satellite <name> [<hours> <interval>] (0)
+ 11.158 show/station all [<regex>] (6)
+ 11.159 show/station [<callsign> ..] (0)
+ 11.160 show/sun [ndays] [<prefix>|<callsign>] (0)
+ 11.161 show/time [<prefix>|<callsign>] (0)
+ 11.162 show/usdb [call ..] (0)
+ 11.163 show/vhfstats [days] [date] (0)
+ 11.164 show/vhftable [days] [date] [prefix ...] (0)
+ 11.165 show/wcy (0)
+ 11.166 show/wcy <n> (0)
+ 11.167 show/wm7d <callsign> (0)
+ 11.168 show/wwv (0)
+ 11.169 show/wwv <n> (0)
+ 11.170 shutdown (5)
+ 11.171 stat/channel [<callsign>] (5)
+ 11.172 stat/db <dbname> (5)
+ 11.173 stat/msg (1)
+ 11.174 stat/msg <msgno> (1)
+ 11.175 stat/route_node <callsign> (5)
+ 11.176 stat/route_node all (5)
+ 11.177 stat/route_user <callsign> (5)
+ 11.178 stat/route_user all (5)
+ 11.179 stat/user [<callsign>] (5)
+ 11.180 sysop (0)
+ 11.181 talk <call> > <node> [<text>] (0)
+ 11.182 talk <call> [<text>] (0)
+ 11.183 type <filearea>/<name> (0)
+ 11.184 uncatchup <node call> all|[msgno> ...] (5)
+ 11.185 unset/announce (0)
+ 11.186 unset/anntalk (0)
+ 11.187 unset/baddx <call>.. (8)
+ 11.188 unset/badnode <call>.. (8)
+ 11.189 unset/badspotter <call>.. (8)
+ 11.190 unset/badword <word>.. (8)
+ 11.191 unset/beep (0)
+ 11.192 unset/dx (0)
+ 11.193 unset/dxgrid (0)
+ 11.194 unset/dxstate (0)
+ 11.195 unset/echo (0)
+ 11.196 unset/email (0)
+ 11.197 unset/here (0)
+ 11.198 unset/hops <call> ann|spots|route|wwv|wcy (8)
+ 11.199 unset/logininfo (0)
+ 11.200 unset/privilege (0)
+ 11.201 unset/prompt (0)
+ 11.202 unset/talk (0)
+ 11.203 unset/wcy (0)
+ 11.204 unset/wwv (0)
+ 11.205 unset/wx (0)
+ 11.206 who (0)
+ 11.207 wx <text> (0)
+ 11.208 wx full <text> (0)
+ 11.209 wx sysop <text> (5)
+
+
______________________________________________________________________
1. Routing and Filtering
either. Use one or the other, not both.
-
You will only require this functionality if you are "well-connected".
What that means is that you are connected to several different parts
of (say) the EU cluster and, at the same time, also connected to two
per link default.
-
For the default routing filter then you have two real choices: either
a "national" view or the "safe" option of only your own callsign.
Examples of each (for my node: GB7DJK) are:-
Exactly the same rules apply for general route filtering. You would
use either an accept filter or a reject filter like this ...
+
+
+
reject/route <node_call> <filter_option>
or
will be renamed as you update.
-
There are 3 basic commands involved in setting and manipulating
filters. These are accept, reject and clear. First we will look
generally at filtering. There are a number of things you can filter in
on VHF which don't either originate or spot someone in Europe.
-
This is an example where you would use a line number (1 and 2 in this
case), if you leave the digit out, the system assumes '1'. Digits
'0'-'9' are available. This make it easier to see just what filters
You can filter in several different ways. The options are listed in
the various helpfiles for accept, reject and filter.
-
-
1.8. Default filters
Sometimes all that is needed is a general rule for node connects.
- 11.105. set/echo (0)
+ 11.105. set/dxstate (0)
+
+ set/dxstate Allow US State info on the end of DX announcements
+
+
+ 11.106. set/echo (0)
set/echo Make the cluster echo your input
- 11.106. set/email <email> ... (0)
+ 11.107. set/email <email> ... (0)
set/email <email> ... Set email address(es) and forward your personals
- 11.107. set/here (0)
+ 11.108. set/here (0)
set/here Tell the system you are present at your terminal
- 11.108. set/homenode <node> (0)
+ 11.109. set/homenode <node> (0)
set/homenode <node> Set your normal cluster callsign
- 11.109. set/hops <call> ann|spots|route|wwv|wcy <n> (8)
+ 11.110. set/hops <call> ann|spots|route|wwv|wcy <n> (8)
set/hops <call> ann|spots|route|wwv|wcy <n> Set hop count
- 11.110. set/language <lang> (0)
+ 11.111. set/language <lang> (0)
set/language <lang> Set the language you want to use
Currentlythe languages available are en (English), de (German), es
(Spanish) and nl (Dutch).
- 11.111. set/location <lat & long> (0)
+ 11.112. set/location <lat & long> (0)
set/location <lat & long> Set your latitude and longitude
- 11.112. set/logininfo (0)
+ 11.113. set/logininfo (0)
set/logininfo Inform when a station logs in locally
- 11.113. set/name <your name> (0)
+ 11.114. set/name <your name> (0)
set/name <your name> Set your name
SET/NAME Dirk
-
-
- 11.114. set/node <call> [<call>..] (5)
+ 11.115. set/node <call> [<call>..] (5)
set/node <call> [<call>..] Make the callsign an AK1A cluster
Tell the system that the call(s) are to be treated as AK1A cluster
andfed PC Protocol rather normal user commands.
- 11.115. set/obscount <count> <call> (8)
+ 11.116. set/obscount <count> <call> (8)
set/obscount <count> <call> Set the 'pump-up' obscelence PING counter
between 1 and 9.It is STRONGLY recommended that you don't change the
default.
- 11.116. set/page <lines per page> (0)
+ 11.117. set/page <lines per page> (0)
set/page <lines per page> Set the lines per page
The setting is stored in your user profile.
- 11.117. set/password (0)
+ 11.118. set/password (0)
set/password Set your own password
the screenas you type, depending on the type of telnet client you
have.
- 11.118. set/prompt <string> (0)
+ 11.119. set/prompt <string> (0)
set/prompt <string> Set your prompt to <string>
- 11.119. set/qra <locator> (0)
+ 11.120. set/qra <locator> (0)
set/qra <locator> Set your QRA Grid locator
- 11.120. set/qth <your qth> (0)
+ 11.121. set/qth <your qth> (0)
set/qth <your qth> Set your QTH
- 11.121. set/spider <call> [<call>..] (5)
+ 11.122. set/spider <call> [<call>..] (5)
set/spider <call> [<call>..] Make the callsign an DXSpider node
Tell the system that the call(s) are to be treated as DXSpider node
andfed new style DX Protocol rather normal user commands.
- 11.122. set/talk (0)
+ 11.123. set/talk (0)
set/talk Allow TALK messages to come out on your terminal
- 11.123. set/wcy (0)
+ 11.124. set/wcy (0)
set/wcy Allow WCY messages to come out on your terminal
- 11.124. set/wwv (0)
+ 11.125. set/wwv (0)
set/wwv Allow WWV messages to come out on your terminal
- 11.125. set/wx (0)
+ 11.126. set/wx (0)
set/wx Allow WX messages to come out on your terminal
- 11.126. show/baddx (1)
+ 11.127. show/baddx (1)
show/baddx Show all the bad dx calls in the system
Display all the bad dx callsigns in the system, see SET/BADDXfor more
information.
- 11.127. show/badnode (1)
+ 11.128. show/badnode (1)
show/badnode Show all the bad nodes in the system
Display all the bad node callsigns in the system, see SET/BADNODEfor
more information.
- 11.128. show/badspotter (1)
+ 11.129. show/badspotter (1)
show/badspotter Show all the bad spotters in the system
SET/BADSPOTTERfor more information.
- 11.129. show/badword (1)
+ 11.130. show/badword (1)
show/badword Show all the bad words in the system
Display all the bad words in the system, see SET/BADWORDfor more
information.
- 11.130. show/configuration [<node>] (0)
+ 11.131. show/configuration [<node>] (0)
show/configuration [<node>] Show all the nodes and users visible
- 11.131. show/configuration/node (0)
+ 11.132. show/configuration/node (0)
show/configuration/node Show all the nodes connected locally
Show all the nodes connected to this node.
- 11.132. show/connect (1)
+ 11.133. show/connect (1)
show/connect Show all the active connections
This command shows information on all the active connections known
tothe node. This command gives slightly more information than WHO.
- 11.13
3. show/date [<prefix>|<callsign>] (0)
+ 11.13
4. show/date [<prefix>|<callsign>] (0)
show/date [<prefix>|<callsign>] Show the local time
show UTC and UTC + the local offset (not including DST) atthe prefixes
or callsigns that you specify.
- 11.134. show/dx (0)
+ 11.135. show/db0sdx <callsign> (0)
+
+ show/db0sdx <callsign> Show QSL infomation from DB0SDX database
+
+ This command queries the DB0SDX QSL server on the internetand returns
+ any information available for that callsign. This serviceis provided
+ for users of this software by http://www.qslinfo.de.See also SHOW/QRZ,
+ SHOW/WM7D.
+
+ 11.136. show/dx (0)
show/dx Interrogate the spot database
qra [<locator>] - this will look for the specific locator if you specify one or else anything that looks like a locator.
-
dxcc - treat the prefix as a 'country' and look for spots from that country regardless of actual prefix. eg dxcc oq2
- You can also use this with the 'by' keyword so eg by W dxcc
+ You can also use this with the 'by' keyword so eg by W dxcc
- 11.13
5. show/dxcc <prefix> (0)
+ 11.13
7. show/dxcc <prefix> (0)
show/dxcc <prefix> Interrogate the spot database by country
- 11.136. show/dxstats [days] [date] (0)
+ 11.138. show/dxstats [days] [date] (0)
show/dxstats [days] [date] Show the DX Statistics
Show the total DX spots for the last <days> no of days (default is
31), starting from a <date> (default: today).
- 11.137. show/files [<filearea> [<string>]] (0)
+ 11.139. show/files [<filearea> [<string>]] (0)
show/files [<filearea> [<string>]] List the contents of a filearea
in astring to see a selection of files in a filearea eg:-
-
- SH/FILES bulletins arld*
+ SH/FILES bulletins arld*
See also TYPE - to see the contents of a file.
- 11.138. show/filter (0)
+ 11.140. show/filter (0)
show/filter Show the contents of all the filters you have set
Show the contents of all the filters that are set. This command
displaysall the filters set - for all the various categories.
- 11.139. show/hfstats [days] [date] (0)
+ 11.141. show/hfstats [days] [date] (0)
show/hfstats [days] [date] Show the HF DX Statistics
Show the HF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a <date> (default: today).
- 11.140. show/hftable [days] [date] [prefix ...] (0)
+ 11.142. show/hftable [days] [date] [prefix ...] (0)
show/hftable [days] [date] [prefix ...] Show the HF DX Spotter Table
printthe worldwide statistics.
- sh/hftable all
+ sh/hftable all
- 11.141. show/hops <call> [ann|spots|route|wcy|wwv] (8)
+
+ 11.143. show/hops <call> [ann|spots|route|wcy|wwv] (8)
show/hops <call> [ann|spots|route|wcy|wwv] Show the hop counts for a
node
specifywhich category you want to see. If you leave the category out
then all the categories will be listed.
- 11.142. show/isolate (1)
+ 11.144. show/isolate (1)
show/isolate Show list of ISOLATED nodes
- 11.143. show/log [<callsign>] (8)
+ 11.145. show/log [<callsign>] (8)
show/log [<callsign>] Show excerpts from the system log
will output a general logfile. With the optional callsign it willshow
output from the log associated with that callsign.
- 11.14
4. show/moon [ndays] [<prefix>|<callsign>] (0)
+ 11.14
6. show/moon [ndays] [<prefix>|<callsign>] (0)
show/moon [ndays] [<prefix>|<callsign>] Show Moon rise and set times
note that the rise and set times are given as the UT times of rise and
set on the requested UT day.
- 11.145. show/muf <prefix> [<hours>][long] (0)
+
+
+ 11.147. show/muf <prefix> [<hours>][long] (0)
show/muf <prefix> [<hours>][long] Show the likely propagation to a
prefix
Itshould be noted that the figures will probably not be very useful,
norterrible accurate, but it is included for completeness.
- 11.146. show/newconfiguration [<node>] (0)
+ 11.148. show/newconfiguration [<node>] (0)
show/newconfiguration [<node>] Show all the nodes and users visible
different formatwhich may not take up quite as much space if you don't
have anyloops.BE WARNED: the list that is returned can be VERY long
- 11.147. show/newconfiguration/node (0)
+ 11.149. show/newconfiguration/node (0)
show/newconfiguration/node Show all the nodes connected locally
Show all the nodes connected to this node in the new format.
- 11.148. show/node [<callsign> ...] (1)
+ 11.150. show/node [<callsign> ...] (1)
show/node [<callsign> ...] Show the type and version number of nodes
thecommand line. If no callsigns are specified then a sorted list of
allthe non-user callsigns known to the system will be displayed.
- 11.149. show/prefix <callsign> (0)
+ 11.151. show/prefix <callsign> (0)
show/prefix <callsign> Interrogate the prefix database
with the internal country no, the CQ and ITU regions. See also
SHOW/DXCC
- 11.150. show/program (5)
+ 11.152. show/program (5)
show/program Show the locations of all the included program modules
Thisis useful for checking where you think you have loaded a .pm file
from.
- 11.151. show/qra <lat> <long> (0)
+ 11.153. show/qra <lat> <long> (0)
show/qra <lat> <long> Convert lat/long to a QRA Grid locator
argument, forexample:-
- SH/QRA 52 41 N 0 58 E
+
+ SH/QRA 52 41 N 0 58 E
- 11.152. show/qra <locator> [<locator>] (0)
+ 11.154. show/qra <locator> [<locator>] (0)
show/qra <locator> [<locator>] Show distance between QRA Grid locators
- 11.153. show/qrz <callsign> (0)
+ 11.155. show/qrz <callsign> (0)
show/qrz <callsign> Show any callbook details on a callsign
This command queries the QRZ callbook server on the internetand
returns any information available for that callsign. This serviceis
- provided for users of this software by http://www.qrz.com
+ provided for users of this software by http://www.qrz.com See also
+ SHOW/WM7D for an alternative.
- 11.154. show/route <callsign> ... (0)
+ 11.156. show/route <callsign> ... (0)
show/route <callsign> ... Show the route to the callsign
- 11.155. show/satellite <name> [<hours> <interval>] (0)
+ 11.157. show/satellite <name> [<hours> <interval>] (0)
show/satellite <name> [<hours> <interval>] Show tracking data
- 11.156. show/station all [<regex>] (6)
+ 11.158. show/station all [<regex>] (6)
show/station all [<regex>] Show list of users in the system
- 11.157. show/station [<callsign> ..] (0)
+ 11.159. show/station [<callsign> ..] (0)
show/station [<callsign> ..] Show information about a callsign
where)that callsign is connected to the cluster.
- SH/ST G1TLH
+ SH/ST G1TLH
- If no callsign is given then show the information for yourself.
+ If no callsign is given then show the information for yourself.
- 11.1
58. show/sun [ndays] [<prefix>|<callsign>] (0)
+ 11.1
60. show/sun [ndays] [<prefix>|<callsign>] (0)
show/sun [ndays] [<prefix>|<callsign>] Show sun rise and set times
note that the rise and set times are given as the UT times of rise and
set on the requested UT day.
- 11.1
59. show/time [<prefix>|<callsign>] (0)
+ 11.1
61. show/time [<prefix>|<callsign>] (0)
show/time [<prefix>|<callsign>] Show the local time
prefixesthen it will show UTC and UTC + the local offset (not
including DST) atthe prefixes or callsigns that you specify.
- 11.160. show/usdb [call ..] (0)
+ 11.162. show/usdb [call ..] (0)
show/usdb [call ..] Show information held on the FCC Call database
- 11.161. show/vhfstats [days] [date] (0)
+ 11.163. show/vhfstats [days] [date] (0)
show/vhfstats [days] [date] Show the VHF DX Statistics
Show the VHF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a date (default: today).
-
- 11.162. show/vhftable [days] [date] [prefix ...] (0)
+ 11.164. show/vhftable [days] [date] [prefix ...] (0)
show/vhftable [days] [date] [prefix ...] Show the VHF DX Spotter Table
- 11.163. show/wcy (0)
+ 11.165. show/wcy (0)
show/wcy Show last 10 WCY broadcasts
- 11.164. show/wcy <n> (0)
+ 11.166. show/wcy <n> (0)
show/wcy <n> Show last <n> WCY broadcasts
Display the most recent WCY information that has been received by the
system
- 11.165. show/wwv (0)
+
+
+ 11.167. show/wm7d <callsign> (0)
+
+ show/wm7d <callsign> Show callbook details on a US callsigns
+
+ This command queries the WM7D callbook server on the internetand
+ returns any information available for that US callsign. This serviceis
+ provided for users of this software by http://www.wm7d.net.See also
+ SHOW/QRZ.
+
+ 11.168. show/wwv (0)
show/wwv Show last 10 WWV broadcasts
- 11.166. show/wwv <n> (0)
+ 11.169. show/wwv <n> (0)
show/wwv <n> Show last <n> WWV broadcasts
Display the most recent WWV information that has been received by the
system
- 11.167. shutdown (5)
+ 11.170. shutdown (5)
shutdown Shutdown the cluster
Shutdown the cluster and disconnect all the users
- 11.168. stat/channel [<callsign>] (5)
+ 11.171. stat/channel [<callsign>] (5)
stat/channel [<callsign>] Show the status of a channel on the cluster
that you are on or else for the callsign that you asked for.Only the
fields that are defined (in perl term) will be displayed.
- 11.169. stat/db <dbname> (5)
+ 11.172. stat/db <dbname> (5)
stat/db <dbname> Show the status of a database
privilege level you will see more or less information. This command is
unlikely to be of much use to anyone other than a sysop.
- 11.170. stat/msg (1)
+ 11.173. stat/msg (1)
stat/msg Show the status of the message system
- 11.171. stat/msg <msgno> (1)
+ 11.174. stat/msg <msgno> (1)
stat/msg <msgno> Show the status of a message
etc.If no message number is given then the status of the message
system is displayed.
- 11.172. stat/route_node <callsign> (5)
+ 11.175. stat/route_node <callsign> (5)
stat/route_node <callsign> Show the data in a Route::Node object
- 11.173. stat/route_node all (5)
+ 11.176. stat/route_node all (5)
stat/route_node all Show list of all Route::Node objects
-
- 11.174. stat/route_user <callsign> (5)
+ 11.177. stat/route_user <callsign> (5)
stat/route_user <callsign> Show the data in a Route::User object
- 11.175. stat/route_user all (5)
+ 11.178. stat/route_user all (5)
stat/route_user all Show list of all Route::User objects
- 11.176. stat/user [<callsign>] (5)
+ 11.179. stat/user [<callsign>] (5)
stat/user [<callsign>] Show the full status of a user
Shows the full contents of a user record including all the secret
flagsand stuff.Only the fields that are defined (in perl term) will be
displayed.
- 11.177. sysop (0)
+
+ 11.180. sysop (0)
sysop Regain your privileges if you login remotely
offerednumbers but nothing will happen when you input a string. Any
match iscase sensitive.
- 11.178. talk <call> > <node> [<text>] (0)
+ 11.181. talk <call> > <node> [<text>] (0)
talk <call> > <node> [<text>] Send a text message to another station
via a node
will send the hftable as you have it to all the people you are cur-
rently talking to.
- 11.179. talk <call> [<text>] (0)
+ 11.182. talk <call> [<text>] (0)
talk <call> [<text>] Send a text message to another station
- 11.180. type <filearea>/<name> (0)
+ 11.183. type <filearea>/<name> (0)
type <filearea>/<name> Look at the contents of a file in one of the
fileareas
See also SHOW/FILES to see what fileareas are available and a list of
content.
- 11.181. uncatchup <node call> all|[msgno> ...] (5)
+ 11.184. uncatchup <node call> all|[msgno> ...] (5)
uncatchup <node call> all|[msgno> ...] Unmark a message as sent
catchup GB7DJK all catchup GB7DJK 300 301 302 303 500-510
-
and to undo what you have just done:-
which will arrange for them to be forward candidates again.Order is
not important.
- 11.182. unset/announce (0)
+ 11.185. unset/announce (0)
unset/announce Stop announce messages coming out on your terminal
-
- 11.183. unset/anntalk (0)
+ 11.186. unset/anntalk (0)
unset/anntalk Stop talk like announce messages on your terminal
allows you to see them again. This is the default.
- 11.184. unset/baddx <call>.. (8)
+ 11.187. unset/baddx <call>.. (8)
unset/baddx <call>.. Propagate a dx spot with this callsign again
- 11.185. unset/badnode <call>.. (8)
+ 11.188. unset/badnode <call>.. (8)
unset/badnode <call>.. Allow spots from this node again
+
Setting a callsign as a 'badnode' will prevent spots from that node
going any further. They will not be displayed and they will not be
sent onto other nodes.The call must be a full eg:-
unset/badnode K1TTT
+
will allow spots from him again.Use with extreme care. This command
may well be superceeded by FILTERing.
- 11.186. unset/badspotter <call>.. (8)
+ 11.189. unset/badspotter <call>.. (8)
unset/badspotter <call>.. Allow spots from this callsign again
will allow spots from him again.Use with extreme care. This command
may well be superceded by FILTERing.
- 11.187. unset/badword <word>.. (8)
+ 11.190. unset/badword <word>.. (8)
unset/badword <word>.. Propagate things with this word again
unset/badword annihilated
-
will allow text with this word again.
- 11.188. unset/beep (0)
+ 11.191. unset/beep (0)
unset/beep Stop beeps for DX and other messages on your terminal
- 11.189. unset/dx (0)
+ 11.192. unset/dx (0)
unset/dx Stop DX messages coming out on your terminal
- 11.190. unset/dxgrid (0)
+ 11.193. unset/dxgrid (0)
unset/dxgrid Stop QRA Grid Squares on the end of DX announcements
cope with this. You can use this command to reset (or set)this
feature.
- 11.191. unset/echo (0)
+ 11.194. unset/dxstate (0)
+
+ unset/dxstate Stop US State info on the end of DX announcements
+
+ If the spotter's or spotted's US State is known it is output on the
+ end of a DX announcement (there is just enough room). A spotter's
+ state will appear on the RHS of the time (like SET/DXGRID) and the
+ spotted's State will appear on the LHS of thetime field. Any
+ information found will override any locator information from
+ SET/DXGRID.Some user programs cannot cope with this. You can use this
+ command to reset (or set) this feature.
+
+ 11.195. unset/echo (0)
unset/echo Stop the cluster echoing your input
setting appropriately. The setting is stored in your user profile.YOU
DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
- 11.192. unset/email (0)
+ 11.196. unset/email (0)
unset/email Stop personal msgs being forwarded by email
- 11.193. unset/here (0)
+ 11.197. unset/here (0)
unset/here Tell the system you are absent from your terminal
- 11.194. unset/hops <call> ann|spots|route|wwv|wcy (8)
+ 11.198. unset/hops <call> ann|spots|route|wwv|wcy (8)
unset/hops <call> ann|spots|route|wwv|wcy Unset hop count
- 11.195. unset/logininfo (0)
+ 11.199. unset/logininfo (0)
unset/logininfo Inform when a station logs out locally
- 11.196. unset/privilege (0)
+ 11.200. unset/privilege (0)
unset/privilege Remove any privilege for this session
will need toeither logout and login again (if you are on a console) or
use theSYSOP command.
- 11.197. unset/prompt (0)
+ 11.201. unset/prompt (0)
unset/prompt Set your prompt back to default
UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back
tonormal.
- 11.198. unset/talk (0)
+ 11.202. unset/talk (0)
unset/talk Stop TALK messages coming out on your terminal
- 11.199. unset/wcy (0)
+
+ 11.203. unset/wcy (0)
unset/wcy Stop WCY messages coming out on your terminal
- 11.200. unset/wwv (0)
+ 11.204. unset/wwv (0)
unset/wwv Stop WWV messages coming out on your terminal
- 11.201. unset/wx (0)
+ 11.205. unset/wx (0)
unset/wx Stop WX messages coming out on your terminal
- 11.202. who (0)
+ 11.206. who (0)
who Show who is physically connected
This is a quick listing that shows which callsigns are connected
andwhat sort of connection they have
- 11.203. wx <text> (0)
+ 11.207. wx <text> (0)
wx <text> Send a weather message to local users
-
- 11.204. wx full <text> (0)
+ 11.208. wx full <text> (0)
wx full <text> Send a weather message to all cluster users
- 11.205. wx sysop <text> (5)
+ 11.209. wx sysop <text> (5)
wx sysop <text> Send a weather message to other clusters only
projects / spider.git / blobdiff