already => '$_[0] already connnected',
anns => 'Announce flag set on $_[0]',
annu => 'Announce flag unset on $_[0]',
+ badnode1 => '$_[0] is now a bad node',
+ badnode2 => '$_[0] is now a good node',
+ badnode3 => 'List of Bad Nodes:-',
bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
bbs => 'Your BBS Address is now \"$_[0]\"',
beepoff => 'Beeps are now off',
beepon => 'Beeps are now on',
- conother => 'Sorry $_[0] you are connected on another port',
- concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster',
+ call1 => 'Callsign lookup via $_[0]:',
+ conother => 'Sorry $_[0] you are connected to me on another port',
+ concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
confail => 'connection to $_[0] failed ($_[1])',
constart => 'connection to $_[0] started',
+ deluser => 'User $_[0] has been deleted',
+ db1 => 'This database is hosted at $_[0]',
+ db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
+ db3 => 'Sorry, database $_[0] doesn\'t exist here',
+ db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
+ db5 => 'Accessing remote database on $_[0]...standby...',
+ db6 => 'Database $_[0] already exists, delete it first',
+ db7 => 'Database $_[0] created for remote node $_[1]',
+ db8 => 'Database $_[0] created locally',
+ db9 => 'Database $_[0] removed',
+ db10 => '$_[0] records imported into $_[1]',
+ db11 => 'Sending your request(s) to $_[0], please stand by...',
+ dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
disc1 => 'Disconnected by $_[0]',
- disc2 => '$_[0] disconnected',
- dx1 => 'Frequency $_[0] not in band [usage: DX freq call comments](see sh/band)',
- dx2 => 'Need a callsign [usage: DX freq call comments]',
+ disc2 => 'Channel $_[0] disconnected',
+ disc3 => 'No Channel, but connection $_[0] disconnected',
+ disc4 => 'No Channel or connection but orphan $_[0] disconnected',
+ done => 'Done',
+ dup => 'Sorry, this is a duplicate',
+ dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
+ dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
dxs => 'DX Spots flag set on $_[0]',
dxu => 'DX Spots flag unset on $_[0]',
e1 => 'Invalid command',
e8 => 'Need a callsign and some text',
e9 => 'Need at least some text',
e10 => '$_[0] not connected locally',
+ e11 => 'Can\'t use $main:mycall as target',
e12 => 'Need a node callsign',
e13 => '$_[0] is not a node',
+ e14 => 'First argument must be numeric and > 0',
+ e15 => 'invalid qualifier \"$_[0]\"',
+ e16 => 'File \"$_[0]\" exists',
+ e17 => 'Please don\'t use the words: @_ on here',
+ e18 => 'Cannot connect to $_[0] ($!)',
+ e19 => 'Invalid character in line',
+ e20 => 'token $_[0] not recognised',
+ e21 => '$_[0] not numeric',
+ e22 => '$_[0] not a callsign',
+ e23 => '$_[0] not a range (eg 0/30000)',
+ e24 => 'Sorry, Internet access is not enabled',
+ e25 => 'Sorry the value must be between $_[0] and $_[1]',
+ e26 => 'Too many concurrent errors, you are being disconnected',
+
+ echoon => 'Echoing enabled',
+ echooff => 'Echoing disabled',
+ echow => '*Echoing is currently disabled, set/echo to enable',
emaile1 => 'Please enter your email address, set/email <your e-mail address>',
emaila => 'Your E-Mail Address is now \"$_[0]\"',
email => 'E-mail address set to: $_[0]',
+ export1 => 'usage: export <msgno> <filename>',
+ export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
+ export3 => '$_[2 ] exported msg $_[0] to $_[1]',
+ filter1 => 'Filter $_[0] updated for $_[1]',
+ filter2 => 'Unknown filter keyword $_[0]',
+ filter3 => 'No filters defined for $_[0]',
+ filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
+ filter5 => 'need some filter commands...',
+ filter6 => '$_[0]$_[1] Filter for $[2] not found',
+ grids => 'DX Grid flag set on $_[0]',
+ gridu => 'DX Grid flag unset on $_[0]',
+ hasha => '$_[0] already exists in $_[1]',
+ hashb => '$_[0] added to $_[1]',
+ hashc => '$_[0] removed from $_[1]',
+ hashd => '$_[0] not in $_[1]',
+ hashe => '$_[0] set on $_[1]',
helpe1 => 'Help system unavailable, tell sysop',
helpe2 => 'No help available on $_[0]',
heres => 'Here set on $_[0]',
homebbs => 'Home BBS set to: $_[0]',
homenode => 'Home Node set to: $_[0]',
hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
+ hnodee2 => 'Failed to set homenode on $_[0]',
hnode => 'Your Homenode is now \"$_[0]\"',
+ init1 => 'sent initialisation message to $_[0]',
iso => '$_[0] Isolated',
isou => '$_[0] UnIsolated',
isoc => '$_[0] created and Isolated',
+ isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
+ isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
+ isow => '$_[0] is isolated; unset/isolate $_[0] first',
l1 => 'Sorry $_[0], you are already logged on on another channel',
- l2 => 'Hello $_[0], this is $main::mycall in $main::myqth running DXSpider V$main::version',
+ l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
+ lang => 'Language is now $_[0]',
+ lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
+ lange2 => 'failed to set language on $_[0]',
lh1 => '$main::data/hop_table.pl doesn\'t exist',
loce1 => 'Please enter your location,, set/location <latitude longitude>',
loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
+ loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
loc => 'Your Lat/Long is now \"$_[0]\"',
lockout => '$_[0] Locked out',
+ lockoutc => '$_[0] Created and Locked out',
lockoutun => '$_[0] Unlocked',
- m2 => '$_[0] Information: $_[1]',
+ loginu => 'User $_[0] has logged in',
+ logoutu => 'User $_[0] has logged out',
+ loginn => 'Node $_[0] has logged in',
+ logoutn => 'Node $_[0] has logged out',
+ m1 => 'Enter Subject (30 characters):',
+ m2 => 'Copy of msg $_[0] sent to $_[1]',
+ m3 => 'Sorry, $_[0] is an unacceptable TO address',
+ m4 => 'Sorry, can\'t access message $_[0]',
+ m5 => 'Sorry, I need a message number',
+ m6 => 'Reply to: $_[0]',
+ m7 => 'Subject : $_[0]',
+ m8 => 'Enter Message /EX to send or /ABORT to exit',
+ m9 => 'New mail has arrived for you',
+ m10 => 'Message Aborted',
+ m11 => 'Message no $_[0] saved and directed to $_[1]',
+ m12 => 'Message no $_[0] deleted',
+ m13 => 'Message no $_[0] missing',
+ m14 => 'Message no $_[0] marked as sent to $_[1]',
+ m15 => 'Message no $_[0] unmarked as sent to $_[1]',
+ m16 => 'Need a Message number',
+ m17 => 'Sorry, cannot send messages in $_[0] mode',
+ msg1 => 'Bulletin Messages Queued',
+ msg2 => 'Private Messages Queued',
+ msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
+ msgu => 'usage: msg <cmd> <msgno> data...',
merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
+ moon => 'Location Rise Set Azim Elev RGain dB',
+ mond => 'Monitoring Disabled',
+ mone => 'Monitoring Enabled',
namee1 => 'Please enter your name, set/name <your name>',
namee2 => 'Can\'t find user $_[0]!',
name => 'Your name is now \"$_[0]\"',
- node => '$_[0] set as AK1A style Node',
+ nodea => '$_[0] set as AK1A style Node',
+ nodeac => '$_[0] created as AK1A style Node',
+ nodeb => '$_[0] set as BBS',
+ nodebc => '$_[0] created as BBS',
+ nodec => '$_[0] set as CLX style Node',
+ nodecc => '$_[0] created as CLX style Node',
+ noder => '$_[0] set as AR-Cluster style Node',
+ noderc => '$_[0] created as AR-Cluster style Node',
+ nodes => '$_[0] set as DXSpider style Node',
+ nodesc => '$_[0] created as DXSpider style Node',
+ nodex => '$_[0] set as DXNET style Node',
+ nodexc => '$_[0] created as DXNET style Node',
nodeu => '$_[0] set back as a User',
- nodec => '$_[0] created as AK1A style Node',
nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
+ notdone => 'NOT Done',
+ nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
+ obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
ok => 'Operation successful',
+ outconn => 'Outstanding connect to $_[0]',
page => 'Press Enter to continue, A to abort ($_[0] lines) >',
pagelth => 'Page Length is now $_[0]',
+ passerr => 'Please use: SET/PASS <password> <callsign>',
+ password => 'Password set or changed for $_[0]',
pingo => 'Ping Started to $_[0]',
- pingi => 'Ping Returned from $_[0] ($_[2] secs)',
- pr => '$_[0] de $main::mycall $main::cldate $main::ztime >',
+ pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
+ pinge1 => 'Cannot ping yourself!',
+ pingint => 'Ping interval on $_[0] set to $_[1] secs',
+ 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
+ pr => '$_[0] de $main::mycall $_[1] $_[2] >',
+ pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
priv => 'Privilege level changed on $_[0]',
prx => '$main::mycall >',
qll => 'Please enter your location with set/location or set/qra',
qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
qra => 'Your QRA Locator is now \"$_[0]\"',
rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
+ rec => '$_[0] records',
read1 => 'Sorry, no new messages for you',
read2 => 'Msg $_[0] not found',
read3 => 'Msg $_[0] not available',
+ route => '$_[0] on $_[1] via $_[2]',
+ sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
+ sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
+ sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
+ sat4 => 'Satellites available:-',
+ satnf => 'Satellite $_[0] unknown',
+ satdisc => '-----',
+ sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
+ sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
+ sethop3 => 'No hops set for $_[0]',
shutting => '$main::mycall shutting down...',
+ sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
+ snode1 => 'Node Call Sort Version',
+ snode2 => '$_[0] $_[1] $_[2]',
+ snode3 => '$_[0] Unknown Call',
+ sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
+ sorry => 'Sorry',
+ spf1 => 'spoof: creating new user $_[0]',
+ stathf => 'HF DX Spot Stats, last 31 days',
+ stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
+ statvhf => 'VHF+ DX Spot Stats, last 31 days',
+ statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
+ statdx => 'Total DX Spots last 31 days',
+ sun => 'Location Rise Set Azim Elev',
+ suser1 => 'usage: callsign user_field_name value',
+ suser2 => 'User $_[0] not found',
+ suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
+ suser4 => 'User field name \'$_[0]\' doesn\'t exist',
+ time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
+ time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
+ time3 => '$_[0] $_[1]',
talks => 'Talk flag set on $_[0]',
talku => 'Talk flag unset on $_[0]',
+ talkend => 'Finished talking to you',
+ talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
+ talkprompt => 'Talk ($_[0])>',
+ talkstart => 'Starting talking to you',
usernf => '*** User record for $_[0] not found ***',
wwvs => 'WWV flag set on $_[0]',
wwvu => 'WWV flag unset on $_[0]',
+ wxs => 'WX flag set on $_[0]',
+ wxu => 'WX flag unset on $_[0]',
+ },
+ nl => {
+ addr => 'Addres gezet op: $_[0]',
+ already => '$_[0] reeds geconnect',
+ anns => 'Announce berichten AAN gezet voor $_[0]',
+ annu => 'Announce berichten UIT gezet voor $_[0]',
+ bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
+ bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
+ beepoff => 'De beep staat nu UIT',
+ beepon => 'De beep staat nu AAN',
+ conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
+ concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
+ conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
+ confail => 'Verbinding met $_[0] mislukt ($_[1])',
+ constart => 'Verbinding met $_[0] gestart',
+ disc1 => 'Gedisconnect door $_[0]',
+ disc2 => '$_[0] gedisconnect',
+ dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
+ dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
+ dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
+ dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
+ e1 => 'Ongeldige opdracht',
+ e2 => 'Fout: $_[0]',
+ e3 => '$_[0]: $_[1] niet gevonden',
+ e4 => 'Minimaal een prefix of een call nodig',
+ e5 => 'Niet toegestaan',
+ e6 => '*** Geen station gespecifiseerd ***',
+ e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
+ e8 => 'Ik heb een call en tekst nodig',
+ e9 => 'Ik heb wel tekst nodig voor een announce!',
+ e10 => '$_[0] is niet lokaal verbonden',
+ e12 => 'Ik heb een node call nodig',
+ e13 => '$_[0] is geen node',
+ emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
+ emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
+ email => 'E-mail addres gezet op: $_[0]',
+ helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
+ helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
+ heres => 'Aanwezigheid AAN gezet voor $_[0]',
+ heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
+ hereu => 'Aanwezigheid UIT gezet voor $_[0]',
+ homebbs => 'Uw Home mailbox is nu $_[0]',
+ homenode => 'Uw (Home) DX-Cluster is : $_[0]',
+ hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
+ hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
+ iso => '$_[0] is geisoleerd (Isolated)',
+ isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
+ isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
+ l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
+ l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
+ lh1 => '$main::data/hop_table.pl bestaat niet',
+ loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
+ loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
+ loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
+ lockout => '$_[0] heeft geen toegang meer (Locked out)',
+ lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
+ m2 => '$_[0] Informatie: $_[1]',
+ merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
+ msgnew => 'Er is nieuwe post gearriveerd voor u',
+ namee1 => 'Geef aub uw naam met, set/name <uw naam>',
+ namee2 => 'Gebruiker $_[0] niet te vinden!',
+ name => 'Uw naam is gezet op \"$_[0]\"',
+ node => '$_[0] gezet als een AK1A stijl DX-cluster',
+ nodeu => '$_[0] teruggezet naar gebruiker status',
+ nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
+ nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
+ ok => 'Opdracht succesvol uitgevoerd',
+ page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
+ pagelth => 'Paginalengte gezet op ($_[0]) regels',
+ passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
+ password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
+ pingo => 'Ping gestart naar $_[0]',
+ pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
+ pr => '$_[0] de $main::mycall $_[1] $_[2] >',
+ pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
+ priv => 'Privilege level gewijzigd op $_[0]',
+ prx => '$main::mycall >',
+ qll => 'Geef uw locator met set/location of set/qra',
+ qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
+ qth => 'Uw QTH is nu \"$_[0]\"',
+ qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
+ qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
+ qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
+ qra => 'Uw QRA Locator is nu \"$_[0]\"',
+ rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
+ read1 => 'Sorry, geen berichten voor u',
+ read2 => 'Bericht $_[0] niet gevonden',
+ read3 => 'Bericht $_[0] niet beschikbaar',
+ shutting => '$main::mycall gaat QRT...',
+ sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
+ sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
+ talks => 'Talk berichten AAN gezet voor $_[0]',
+ talku => 'Talk berichten UIT gezet voor $_[0]',
+ usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
+ wwvs => 'WWV berichten AAN gezet voor $_[0]',
+ wwvu => 'WWV berichten UIT gezet voor $_[0]',
+ wxs => 'WX berichten AAN gezet voor $_[0]',
+ wxu => 'WX berichten UIT gezet voor $_[0]',
},
fr => {
},
de => {
},
+ sp => {
+ addr => 'Dirección es ahora: $_[0]',
+ already => '$_[0] ya esta conctado',
+ anns => 'Anuncios activados $_[0]',
+ annu => 'Anuncios desactivados $_[0]',
+ badnode1 => '$_[0] es ahora un nodo indeseado',
+ badnode2 => '$_[0] es ahora un nodo normal',
+ badnode3 => 'Lista de nodos indeseados:-',
+ bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
+ bbs => 'Tu BBS es ahora \"$_[0]\"',
+ beepoff => 'Beeps desactivados',
+ beepon => 'Beeps activados',
+ call1 => 'Callsign lookup via $_[0]:',
+ conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
+ concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
+ conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
+ confail => 'conexión con $_[0] fallida ($_[1])',
+ constart => 'conexión con $_[0] ha comenzado',
+ disc1 => 'Desconectado por $_[0]',
+ disc2 => '$_[0] desconectado',
+ disc3 => 'No Channel, but connection $_[0] disconnected',
+ disc4 => 'No Channel or connection but orphan $_[0] disconnected',
+ db1 => 'Esta base de datos está en $_[0]',
+ db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
+ db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
+ db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
+ db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
+ db6 => 'Base de datos $_[0] ya existe, bórrala primero',
+ db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]',
+ db8 => 'Base de datos $_[0] creada localmente',
+ db9 => 'Base de datos $_[0] borrada',
+ db10 => '$_[0] records imported into $_[1]',
+ db11 => 'Petición enviada a $_[0], por favor espera...',
+ dfreq1 => 'Frecuencia invalida $_[0] se necesita: ej 0/30000 o hf o hf/cw',
+ dup => 'Lo siento, esto es un duplicado',
+ dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
+ dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
+ dxs => 'DX Spots activado $_[0]',
+ dxu => 'DX Spots desactivado $_[0]',
+ e1 => 'Comando inválido',
+ e2 => 'Error: $_[0]',
+ e3 => '$_[0]: $_[1] no encontrado',
+ e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
+ e5 => 'No permitido',
+ e6 => '*** No se ha especificado una estación ***',
+ e7 => 'indicativo $_[0] no visible en el cluster',
+ e8 => 'Se necesita un indicativo y algo de texto',
+ e9 => 'Se necesita al menos algo de texto',
+ e10 => '$_[0] no conectado en local',
+ e11 => 'Can\'t use $main:mycall as target',
+ e12 => 'Se necesita el indicativo del nodo',
+ e13 => '$_[0] no es un nodo',
+ e14 => 'El primer argumento debe de ser mumérico y > 0',
+ e15 => 'cualificador no válido \"$_[0]\"',
+ e16 => 'El fichero \"$_[0]\" ya existe',
+ e17 => 'Por favor no uses la palabra: @_ aqui',
+ e18 => 'No se puede conectar con $_[0] ($!)',
+ e19 => 'Caracter inválido en la linea',
+ e20 => 'señal $_[0] no reconocido',
+ e21 => '$_[0] no numérico',
+ e22 => '$_[0] no es un indicativo',
+ e23 => '$_[0] fuera de rango (ej: 0/30000)',
+ e24 => 'Lo siento, el acceso a internet no está habilitado',
+ e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
+ e26 => 'Demasiados errores, seras desconectado',
+ echoon => 'Habilitado eco',
+ echooff => 'Deshabilitado eco',
+ echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
+ emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
+ emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
+ email => 'E-mail es ahora: $_[0]',
+ export1 => 'usa: export <msgno> <filename>',
+ export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])',
+ export3 => '$_[2 ] exportando msg $_[0] to $_[1]',
+ filter1 => 'Filtro $_[0] actualizado para $_[1]',
+ filter2 => 'Necesito un valor para $_[0]',
+ filter3 => 'No hay filtros definidos para $_[0]',
+ filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
+ filter5 => 'necesito algunos camandos para el filtro...',
+ filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
+ grids => 'DX Grid está activado $_[0]',
+ gridu => 'DX Grid está desavtivado $_[0]',
+ hasha => '$_[0] ya existe en $_[1]',
+ hashb => '$_[0] añadido a $_[1]',
+ hashc => '$_[0] eliminado desde $_[1]',
+ hashd => '$_[0] no en $_[1]',
+ hashe => '$_[0] activado $_[1]',
+ helpe1 => 'La ayuda no esta disponible, avisa al sysop',
+ helpe2 => 'No hay ayuda disponible en $_[0]',
+ heres => 'Estas presente $_[0]',
+ heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
+ hereu => 'Estas ausente $_[0]',
+ homebbs => 'Tu BBS es ahora: $_[0]',
+ homenode => 'Tu Nodo habitual es ahora: $_[0]',
+ hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
+ hnodee2 => 'Fallo al poner homenode en $_[0]',
+ hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
+ init1 => 'enviando mensaje de inicialización a $_[0]',
+ iso => '$_[0] Aislado',
+ isou => '$_[0] en red',
+ isoc => '$_[0] creado y aislado',
+ l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
+ l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
+ lang => 'El idioma es ahora $_[0]',
+ lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
+ lange2 => 'fallo al poner idioma en $_[0]',
+ lh1 => '$main::data/hop_table.pl no existe',
+ loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
+ loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
+ loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
+ loc => 'Tu Lat/Long es ahora \"$_[0]\"',
+ lockout => '$_[0] Boloqueado',
+ lockoutc => '$_[0] Creado y bloqueado',
+ lockoutun => '$_[0] Desbloqueado',
+ loginu => 'Usuario $_[0] conectado',
+ logoutu => 'Usuario $_[0] desconectado',
+ loginn => 'Nodo $_[0] conectado',
+ logoutn => 'Nodo $_[0] desconectado',
+ m1 => 'Introduce título (30 caracteres):',
+ m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
+ m3 => 'Lo siento, $_[0] no se puede enviar TO dirección',
+ m4 => 'Lo siento, no puedo acceder al mensaje $_[0]',
+ m5 => 'Lo siento, se necesita un número de mensaje',
+ m6 => 'Reenviado a: $_[0]',
+ m7 => 'Título : $_[0]',
+ m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
+ m9 => 'Hay correo nuevo para ti.Borralo una vez leido.',
+ m10 => 'mensaje interrumpido',
+ m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
+ m12 => 'mensaje nr $_[0] borrado',
+ m13 => 'mensaje nr $_[0] no encontrado',
+ m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]',
+ m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]',
+ m16 => 'Necesito un número de mensaje',
+ m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
+ msg1 => 'Bulletin Messages Queued',
+ msg2 => 'Private Messages Queued',
+ msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
+ msgu => 'usa: msg <cmd> <msgno> data...',
+ merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
+ moon => 'QTH Salida Puesta Azim Elev RGain dB',
+ namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
+ namee2 => 'No se encuentra el usuario $_[0]!',
+ name => 'Tu nombre es ahora \"$_[0]\"',
+ nodea => '$_[0] fijado como nodo AK1A ',
+ nodeac => '$_[0] creado como nodo AK1A ',
+ nodeb => '$_[0] fijado como BBS',
+ nodebc => '$_[0] creado como BBS',
+ nodec => '$_[0] fijado como nodo CLX ',
+ nodecc => '$_[0] creado como nodo CLX ',
+ noder => '$_[0] fijado como nodo AR-Cluster ',
+ noderc => '$_[0] creado como nodo AR-Cluster ',
+ nodes => '$_[0] fijado como nodo DXSpider ',
+ nodesc => '$_[0] creado como nodo DXSpider ',
+ nodex => '$_[0] fijado como nodo DXNET ',
+ nodexc => '$_[0] creado como nodo DXNET ',
+ nodeu => '$_[0] es ahora un usuario',
+ nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
+ notdone => 'NO se pudo hacer',
+ nothere => 'Lo siento, pero $_[0] no esta aqui ahora, intentalo mas tarde',
+ obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
+ ok => 'Operación realizada',
+ outconn => 'Iniciando conexion con $_[0]',
+ page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >',
+ pagelth => 'La longitud de las páginas es ahora $_[0]',
+ passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
+ password => 'Password ajustado o cambiado para $_[0]',
+ pingo => 'Iniciado el ping a $_[0]',
+ pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs',
+ pinge1 => 'No puedes enviarte un ping a ti mismo!',
+ pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos',
+ 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
+ pr => '$_[0] de $main::mycall $_[1] $_[2] >',
+ pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
+ priv => 'Nivel de privilegios en $_[0]',
+ prx => '$main::mycall >',
+ qll => 'Por favor introduce tu locator con set/location o set/qra',
+ qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
+ qth => 'Tu QTH es ahora \"$_[0]\"',
+ qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
+ qrashe1 => 'Por favor introduce un QRA locator, ej set/qra JO02LQ o sh/qra JO02LQ IO93NS',
+ qrae2 => 'No se reconocio \"$_[0]\" como un QRA locator ( ej JO02LQ)',
+ qra => 'Tu QRA Locator es ahora \"$_[0]\"',
+ rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
+ rec => '$_[0] records',
+ read1 => 'Lo siento, no hay mensajes nuevos para ti',
+ read2 => 'Msg $_[0] no encontrado',
+ read3 => 'Msg $_[0] no disponible',
+ route => '$_[0] en $_[1] via $_[2]',
+ sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] minutos',
+ sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
+ sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
+ sat4 => 'Satélites disponibles:-',
+ satnf => 'Satélite $_[0] desconocido',
+ satdisc => '-----',
+ sethop1 => 'usa: set/hops <call> ann|spots|wwv|wcy <nr de hops>',
+ sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
+ sethop3 => 'No hay hops definidos para $_[0]',
+ shutting => '$main::mycall shutting down...',
+ sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
+ snode1 => 'Nodo Call Sort Version',
+ snode2 => '$_[0] $_[1] $_[2]',
+ snode3 => '$_[0] Indicativo desconocido',
+ sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
+ sorry => 'Lo siento',
+ spf1 => 'spoof: creando nuevo usuario $_[0]',
+ sun => 'QTH Salida Puesta Azim Elev',
+ suser1 => 'usa: indicativo user_field_name value',
+ suser2 => 'Usuario $_[0] no encontrado',
+ suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
+ suser4 => 'User field name \'$_[0]\' doesn\'t exist',
+ time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
+ time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
+ time3 => '$_[0] $_[1]',
+ talks => 'Talk activado $_[0]',
+ talku => 'Talk desactivado $_[0]',
+ talkend => 'Finalizado modo talk contigo',
+ talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
+ talkprompt => 'Talk ($_[0])>',
+ talkstart => 'Iniciando modo talk contigo',
+ usernf => '*** User record for $_[0] no encontrado ***',
+ wwvs => 'WWV activado $_[0]',
+ wwvu => 'WWV desactivado $_[0]',
+ wxs => 'WX activado $_[0]',
+ wxu => 'WX desactivado $_[0]',
+ },
);
projects / spider.git / blobdiff