Create an 'accept this announce' line for a filter.
An accept filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
accept/ann input node_default by G,M,2
accept/ann user_default by G,M,2
+=== 8^ACCEPT/ROUTE <call> [0-9] <pattern>^Set an 'accept' filter line for routing
+Create an 'accept this routing PC Protocol' line for a filter.
+
+An accept filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is passed thru that interface. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+
+some examples:-
+
+ acc/route gb7djk call_dxcc 61,38 (send only UK+EIRE nodes)
+ acc/route gb7djk call gb7djk (equiv to SET/ISOLATE)
+
+You can use the tag 'all' to accept everything eg:
+
+ acc/route all
+
+
=== 0^ACCEPT/SPOTS [0-9] <pattern>^Set an 'accept' filter line for spots
Create an 'accept this spot' line for a filter.
An accept filter line means that if the spot matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
call <prefixes> eg: G,PA,HB9
info <string> eg: iota or qsl
by <prefixes>
some examples:-
- acc/spot 1 freq hf/cw
- acc/spot 2 freq vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
You can use the tag 'all' to accept everything, eg:
- ann/spot 3 all
+ acc/spot 3 all
but this probably for advanced users...
+
=== 8^ACCEPT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
This version allows a sysop to set a filter for a callsign as well as the
default for nodes and users eg:-
accept/spot user_default by G,M,2
+=== 0^ACCEPT/WCY [0-9] <pattern>^set an 'accept' WCY filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+There are no examples because WCY Broadcasts only come from one place and
+you either want them or not (see UNSET/WCY if you don't want them).
+
+This command is really provided for future use.
+
+See HELP FILTER for information.
+
+=== 8^ACCEPT/WCY <call> [input] [0-9] <pattern>^WCY filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ accept/wcy node_default all
+ set/hops node_default 10
+
+=== 0^ACCEPT/WWV [0-9] <pattern>^set an 'accept' WWV filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+for example
+
+ accept/wwv by_zone 4
+
+is probably the only useful thing to do (which will only show WWV broadcasts
+by stations in the US).
+
+See HELP FILTER for information.
+
+=== 8^ACCEPT/WWV <call> [input] [0-9] <pattern>^WWV filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ accept/wwv db0sue-7 1 by_zone 4
+ accept/wwv node_default all
+ set/hops node_default 10
+
+ accept/wwv user_default by W,K
+
=== 0^ANNOUNCE <text>^Send an announcement to LOCAL users only
<text> is the text of the announcement you wish to broadcast
If you have a filter:-
- acc/spot 1 freq hf/cw
- acc/spot 2 freq vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
and you say:-
you will be left with:-
- acc/spot 2 freq vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
If you do:
use the script in /spider/connect/<callsign> to effect the 'chat' exchange
necessary to traverse the network(s) to logon to the cluster <callsign>.
+=== 9^DELELE/USER <callsign> ...^Delete this user from the User Database
+This command will completely remove a one or more users from the database.
+It goes without saying that you should use this command CAREFULLY!
+
=== 0^DBAVAIL^Show a list of all the Databases in the system
Title says it all really, this command lists all the databases defined
in the system. It is also aliased to SHOW/COMMAND.
perl -d cluster.pl
It will interrupt the cluster just after the debug command has finished.
+
=== 0^DIRECTORY^List messages
=== 0^DIRECTORY ALL^List all messages
=== 0^DIRECTORY OWN^List your own messages
it BUT if you specify an 'accept' filter then any spots that don't
match are dumped. For example if I have a one line accept filter:-
- accept/spots freq vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+ accept/spots on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
then automatically you will ONLY get VHF spots from or to CQ zones 14
15 and 16. If you set a reject filter like:
- reject/spots freq hf/cw
+ reject/spots on hf/cw
Then you will get everything EXCEPT HF CW spots, If you am interested in IOTA
and will work it even on CW then you could say:-
- reject/spots freq hf/cw and not info iota
+ reject/spots on hf/cw and not info iota
But in that case you might only be interested in iota and say:-
- accept/spots not freq hf/cw or info iota
+ accept/spots not on hf/cw or info iota
which is exactly the same. You should choose one or the other until
you are confortable with the way it works. Yes, you can mix them
You can arrange your filter lines into logical units, either for your
own understanding or simply convenience. I have one set frequently:-
- reject/spots 1 freq/cw
- reject/spots 2 freq 50000/1400000 not (by_zone 14,15,16 or call_zone 14,15,16)
+ reject/spots 1 on hf/cw
+ reject/spots 2 on 50000/1400000 not (by_zone 14,15,16 or call_zone 14,15,16)
What this does is to ignore all HF CW spots (being a class B I can't
read any CW and couldn't possibly be interested in HF :-) and also
that you will NEED brackets in a situation like line 2 because,
without it, will assume:-
- (freq 50000/1400000 and by_zone 14,15,16) or call_zone 14,15,16
+ (on 50000/1400000 and by_zone 14,15,16) or call_zone 14,15,16
annoying, but that is the way it is. If you use OR - use
brackets. Whilst we are here CASE is not important. 'And BY_Zone' is
If you want to alter your filter you can just redefine one or more
lines of it or clear out one line. For example:-
- reject/spots 1 freq/ssb
+ reject/spots 1 on hf/ssb
or
my example that filters hf/cw spots and accepts vhf/uhf spots from EU
can be written with a mixed filter, eg:
- rej/spot freq hf/cw
- acc/spot freq 0/30000
- acc/spot 2 freq 50000/1400000 and (by_zone 14,15,16 or call_zone 14,15,16)
+ rej/spot on hf/cw
+ acc/spot on 0/30000
+ acc/spot 2 on 50000/1400000 and (by_zone 14,15,16 or call_zone 14,15,16)
each filter slot actually has a 'reject' slot and an 'accept'
slot. The reject slot is executed BEFORE the accept slot.
The next filter line lets through just VHF/UHF spots from EU.
+=== 8^FORWARD/LATLONG <node_call>^Send latitude and longitude information to another cluster
+This command sends all the latitude and longitude information that your
+cluster is holding against callsigns. One advantage of recieving this
+information is that more locator information is held by you. This
+means that more locators are given on the DX line assuming you have
+SET/DXGRID enabled. This could be a LOT of information though, so
+it is not recommended on slow links.
+
=== 1^FORWARD/OPERNAM <call>^Send out information on this <call> to all clusters
This command sends out any information held in the user file which can
be broadcast in PC41 protocol packets. This information is Name, QTH, Location
Reload the /spider/data/bands.pl file if you have changed it manually whilst
the cluster is running.
-=== 9^LOAD/BADDX^Reload the bad DX table
-Reload the /spider/data/baddx.pl file if you have changed it manually whilst
-the cluster is running. This table contains the DX Calls that, if spotted,
-will not be passed on. FR0G and TEST are classic examples.
-
=== 9^LOAD/BADMSG^Reload the bad msg table
Reload the /spider/msg/badmsg.pl file if you have changed it manually whilst
the cluster is running. This table contains a number of perl regular
or
pc G1TLH Try doing that properly!!!
-=== 1^PING <node>^Send a ping command to another cluster
-This command is used to estimate the quality of the link to another cluster.
-The time returned is the length of time taken for a PC51 to go to another
-cluster and be returned.
-
=== 0^KILL <msgno> [<msgno> ...]^Remove or erase a message from the system
You can get rid of any message to or originating from your callsign using
this command. You can remove more than one message at a time.
You can also use in the same way as a talk command to a connected user but
without any processing, added of "from <blah> to <blah" or whatever.
-=== 1^PING <node call>^Find out the delays an a circuit to another node
-This command will enable sysops to determine the speed of an inter-cluster
-node.
-
+=== 1^PING <node call>^Check the link quality between nodes
+This command allows you to send a frame to another cluster node on
+the network and get a return frame. The time it takes to do this
+is a good indication of the quality of the link. The actual time
+it takes is output to the console in seconds.
Any visible cluster node can be PINGed.
=== 1^RCMD <node call> <cmd>^Send a command to another DX Cluster
=== 5^READ-^
As a sysop you may read any message on the system
-=== 0^REJECT/ANNOUNCE [0-9] <pattern>^Set an 'reject' filter line for announce
+=== 0^REJECT/ANNOUNCE [0-9] <pattern>^Set a 'reject' filter line for announce
Create an 'reject this announce' line for a filter.
-An reject filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+A reject filter line means that if the announce matches this filter it is
+passed onto the user. See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
reject/ann input node_default by G,M,2
reject/ann user_default by G,M,2
-=== 0^REJECT/SPOTS [0-9] <pattern>^Set an 'reject' filter line for spots
-Create an 'reject this spot' line for a filter.
+=== 0^REJECT/SPOTS [0-9] <pattern>^Set a 'reject' filter line for spots
+Create a 'reject this spot' line for a filter.
-An reject filter line means that if the spot matches this filter it is
-dumped (not passed on). See HELP FILTERS for more info. Please read this
+A reject filter line means that if the spot matches this filter it is
+dumped (not passed on). See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
call <prefixes> eg: G,PA,HB9
info <string> eg: iota or qsl
by <prefixes>
For frequencies, you can use any of the band names defined in
SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
thus: hf/ssb. You can also just have a simple range like: 0/30000 -
-this is more efficient than saying simply: freq HF (but don't get
+this is more efficient than saying simply: on HF (but don't get
too hung up about that)
some examples:-
- rej/spot 1 freq hf
- rej/spot 2 freq vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
+ rej/spot 1 on hf
+ rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
You can use the tag 'all' to reject everything eg:
but this probably for advanced users...
+=== 8^REJECT/ROUTE <call> [0-9] <pattern>^Set an 'reject' filter line for routing
+Create an 'reject this routing PC Protocol' line for a filter.
+
+An reject filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is NOT passed thru that interface. See HELP FILTERING for more info. Please
+read this to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+
+some examples:-
+
+ rej/route gb7djk call_dxcc 61,38 (everything except UK+EIRE nodes)
+
+You can use the tag 'all' to reject everything eg:
+
+ rej/route all (equiv to [very] restricted mode)
+
=== 8^REJECT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
This version allows a sysop to set a filter for a callsign as well as the
default for nodes and users eg:-
reject/spot user_default by G,M,2
+=== 0^REJECT/WCY [0-9] <pattern>^set a 'reject' WCY filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+There are no examples because WCY Broadcasts only come from one place and
+you either want them or not (see UNSET/WCY if you don't want them).
+
+This command is really provided for future use.
+
+See HELP FILTER for information.
+
+=== 8^REJECT/WCY <call> [input] [0-9] <pattern>^WCY filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ reject/wcy gb7djk all
+
+=== 0^REJECT/WWV [0-9] <pattern>^set a 'reject' WWV filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+for example
+
+ reject/wwv by_zone 14,15,16
+
+is probably the only useful thing to do (which will only show WWV broadcasts
+by stations in the US).
+
+See HELP FILTER for information.
+
+=== 8^REJECT/WWV <call> [input] [0-9] <pattern>^WWV filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ reject/wwv db0sue-7 1 by_zone 4
+ reject/wwv node_default all
+
+ reject/wwv user_default by W
+
=== 0^REPLY^Reply (privately) to the last message that you have read
=== 0^REPLY <msgno>^Reply (privately) to the specified message
=== 0^REPLY B <msgno>^Reply as a Bulletin to the specified message
=== 5^SET/ARCLUSTER <call> [<call>..]^Make the callsign an AR-Cluster node
+=== 8^SET/BADDX <call>..^Stop words we do not wish to see in the callsign field
+of a dx spot being propagated
+=== 8^UNSET/BADDX <call>..^Allow a word to be seen again in a DX spot
+Setting a word as 'baddx' will prevent spots with that word in the
+callsign field of a DX spot from going any further. They will not be
+displayed and they will not be sent onto other nodes.
+
+The word must be wriiten in full, no wild cards are allowed eg:-
+
+ set/baddx FORSALE VIDEO FR0G
+
+To allow a word again, use the following command ...
+
+ unset/baddx VIDEO
+
+=== 8^SET/BADNODE <call>..^Stop spots from this node being propagated
+=== 8^UNSET/BADNODE <call>..^Allow spots from this node again
+Setting a callsign as a 'badnode' will prevent spots from that node
+going any further. They will not be displayed and they will not be
+sent onto other nodes.
+
+The call must be a full eg:-
+
+ set/badnode K1TTT
+
+will stop anything from K1TTT. If you want SSIDs as well then you must
+enter them specifically.
+
+ unset/badnode K1TTT
+
+will allow spots from him again.
+
+Use with extreme care. This command may well be superceeded by FILTERing.
+
+=== 8^SET/BADSPOTTER <call>..^Stop spots from this callsign being propagated
+=== 8^UNSET/BADSPOTTER <call>..^Allow spots from this callsign again
+Setting a callsign as a 'badspotter' will prevent spots from this callsign
+going any further. They will not be displayed and they will not be
+sent onto other nodes.
+
+The call must be written in full, no wild cards are allowed eg:-
+
+ set/badspotter VE2STN
+
+will stop anything from VE2STN. If you want SSIDs as well then you must
+enter them specifically.
+
+ unset/badspotter VE2STN
+
+will allow spots from him again.
+
+Use with extreme care. This command may well be superceded by FILTERing.
+
=== 0^SET/BEEP^Add a beep to DX and other messages on your terminal
=== 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
+=== 5^SET/BBS <call> [<call>..]^Make the callsign a BBS
+
=== 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
=== 9^SET/DEBUG <name>^Add a debug level to the debug set
=== 9^UNSET/DEBUG <name>^Remove a debug level from the debug set
+You can choose to log several different levels. The levels are
+
+chan
+state
+msg
+cron
+connect
+
+You can show what levels you are logging with SHOW/DEBUG
=== 0^SET/DX^Allow DX messages to come out on your terminal
=== 0^UNSET/DX^Stop DX messages coming out on your terminal
default values, if a node has not responded to a ping within 15 minutes,
it is disconnected.
+You can set this parameter between 1 and 9.
+
+It is STRONGLY recommended that you don't change the default.
+
=== 0^SET/PAGE <lines per page>^Set the lines per page
Tell the system how many lines you wish on a page when the number of line
of output from a command is more than this. The default is 20. Setting it
You can use this command to set a different interval. Please don't.
-But if you do the value you enter is treated as minutes up 60 and seconds
+But if you do the value you enter is treated as minutes up 30 and seconds
for numbers greater than that.
This is used also to help determine when a link is down at the far end
(as certain cluster software doesn't always notice), see SET/OBSCOUNT
for more information.
+If you must change it (and it may be useful for internet connected nodes
+on dynamic IP addresses that go away after a set time of usage) the time
+can be specified as:-
+
+ 5 which if less than 30 is converted to minutes otherwise is
+ taken as the no of seconds between pings.
+ 120s 120 seconds
+ 5m 5 minutes
+ 1h 1 hour
+
+Please be aware that this causes traffic to occur on the link, setting
+this value too low may annoy your neighbours beyond the point of
+endurance!
+
+You can switch this off by setting it to 0.
+
=== 9^SET/PRIVILEGE <n> <call> [<call..]^Set privilege level on a call
Set the privilege level on a callsign. The privilege levels that pertain
to commands are as default:-
If you are a sysop and you come in as a normal user on a remote connection
your privilege will automatically be set to 0.
+=== 0^UNSET/PRIVILEGE^Remove any privilege for this session
+You can use this command to 'protect' this session from unauthorised
+use. If you want to get your normal privilege back you will need to
+either logout and login again (if you are on a console) or use the
+SYSOP command.
+
=== 9^SET/PASSWORD <callsign> <string>^Set a users password
The password for a user can only be set by a full sysop. The string
can contain any characters but any spaces are removed (you can type in
=== 0^SET/WX^Allow WX messages to come out on your terminal
=== 0^UNSET/WX^Stop WX messages coming out on your terminal
-=== 0^SHOW/CALL <callsign>^Show any callbook details on a callsign
-This command queries an international callbook server on the internet
-and returns any information available for that callsign.
+=== 1^SHOW/BADDX^Show all the bad dx calls in the system
+Display all the bad dx callsigns in the system, see SET/BADDX
+for more information.
+
+=== 1^SHOW/BADNODE^Show all the bad nodes in the system
+Display all the bad node callsigns in the system, see SET/BADNODE
+for more information.
+
+=== 1^SHOW/BADSPOTTER^Show all the bad spotters in the system
+Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
+for more information.
+
+=== 0^SHOW/CONFIGURATION [<node>]^Show all the nodes and users visible
+This command allows you to see all the users that can be seen
+and the nodes to which they are connected.
+
+This command is normally abbreviated to: sh/c
+
+BE WARNED: the list that is returned can be VERY long
+
+=== 0^SHOW/CONFIGURATION/NODE^Show all the nodes connected locally
+Show all the nodes connected to this node.
+
+=== 1^SHOW/CONNECT^Show all the active connections
+This command shows information on all the active connections known to
+the node. This command gives slightly more information than WHO.
=== 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time
This is very nearly the same as SHOW/TIME, the only difference the format
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
+=== 9^SHOW/DEBUG^Show what levels of debug information you are logging
+
=== 0^SHOW/DX^Interrogate the spot database
If you just type SHOW/DX you will get the last so many spots
(sysop configurable, but usually 10).
Show the contents of all the filters that are set. This command displays
all the filters set - for all the various categories.
+=== 0^SHOW/HFSTATS^Show the HF DX Spot statistics
+Show the HF DX Spot statistics for your country for the last 31 days
+
=== 8^SHOW/HOPS <call> [ann|spots|wcy|wwv]^Show the hop counts for a node
This command shows the hop counts set up for a node. You can specify
which category you want to see. If you leave the category out then
=== 9^SHOW/LOCKOUT^Show the list of locked out or excluded callsigns
+=== 8^SHOW/LOG [<callsign>]^Show excerpts from the system log
+This command outputs a short section of the system log. On its own
+it will output a general logfile. With the optional callsign it will
+show output from the log associated with that callsign.
+
=== 0^SHOW/MOON [<prefix>|<callsign>]^Show Moon rise and set times
Show the Moon rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
SH/QRA 52 41 N 0 58 E
+=== 0^SHOW/QRZ <callsign>^Show any callbook details on a callsign
+This command queries the QRZ callbook server on the internet
+and returns any information available for that callsign. This service
+is provided for users of this software by http://www.qrz.com
+
+=== 0^SHOW/ROUTE <callsign> ...^Show the route to the callsign
+This command allows you to see to which node the callsigns specified are
+connected. It is a sort of inverse sh/config.
+
+sh/route n2tly
+
=== 0^SHOW/SATELLITE <name> [<hours> <interval>]^Show tracking data
Show the tracking data from your location to the satellite of your choice
from now on for the next few hours.
SH/SAT AO-10
SH/SAT FENGYUN1 12 2
+=== 6^SHOW/STATION ALL [<regex>]^Show list of users in the system
+=== 0^SHOW/STATION [<callsign> ..]^Show information about a callsign
+Show the information known about a callsign and whether (and where)
+that callsign is connected to the cluster.
+
+ SH/ST G1TLH
+
+If no callsign is given then show the information for yourself.
+
=== 0^SHOW/SUN [<prefix>|<callsign>]^Show sun rise and set times
Show the sun rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
+=== 0^SHOW/VHFSTATS^Show the VHF DX Spot statistics
+Show the VHF/UHF DX Spot statistics for your country for the last 31 days
+
=== 0^SHOW/WCY^Show last 10 WCY broadcasts
=== 0^SHOW/WCY <n>^Show last <n> WCY broadcasts
Display the most recent WCY information that has been received by the system
Only the fields that are defined (in perl term) will be displayed.
-=== 5^STAT/MSG <msgno>^Show the status of a message
+=== 1^STAT/MSG^Show the status of the message system
+=== 1^STAT/MSG <msgno>^Show the status of a message
This command shows the internal status of a message and includes information
such as to whom it has been forwarded, its size, origin etc etc.
+If no message number is given then the status of the message system is
+displayed.
+
+=== 5^STAT/ROUTE_NODE <callsign>^Show the data in a Route::Node object
+=== 5^STAT/ROUTE_NODE all^Show list of all Route::Node objects
+
+=== 5^STAT/ROUTE_USER <callsign>^Show the data in a Route::User object
+=== 5^STAT/ROUTE_USER all^Show list of all Route::User objects
+
=== 5^STAT/USER [<callsign>]^Show the full status of a user
Shows the full contents of a user record including all the secret flags
and stuff.
projects / spider.git / blobdiff