The DXSpider Installation and Administration Manual
Ian Maude, G0VGS, (ianmaude@btinternet.com)
- Version 1.28 January 2001
+ Version 1.31 January 2001
A reference for SysOps of the DXSpider DXCluster program.
______________________________________________________________________
8. Other filters
8.1 Filtering Mail
- 8.2 Filtering DX callouts
+ 8.2 Filtering DX callouts (Depricated)
8.3 Filtering words from text fields in Announce, Talk and DX spots
- 9. Information, files and useful programs
-
- 9.1 MOTD
- 9.2 Downtime message
- 9.3 Other text messages
- 9.4 The Aliases file
- 9.5 Forward.pl
- 9.6 Distribution lists
- 9.7 Console.pl
-
- 10. CVS
-
- 11. The DXSpider command set
-
- 11.1 accept/announce (0)
- 11.2 accept/announce (extended for sysops) (8)
- 11.3 accept/spots (0)
- 11.4 accept/spots (extended for sysops) (8)
- 11.5 accept/wcy (0)
- 11.6 accept/wcy (extended for sysops) (8)
- 11.7 accept/wwv (0)
- 11.8 accept/wwv (extended for sysops) (8)
- 11.9 announce (0)
- 11.10 announce full (0)
- 11.11 announce sysop (5)
- 11.12 apropos (0)
- 11.13 bye (0)
- 11.14 catchup (5)
- 11.15 clear/spots (0)
- 11.16 connect (5)
- 11.17 dbavail (0)
- 11.18 dbcreate (9)
- 11.19 dbimport (9)
- 11.20 dbremove (9)
- 11.21 dbshow (0)
- 11.22 debug (9)
- 11.23 directory (0)
- 11.24 directory (extended for sysops) (5)
- 11.25 disconnect (8)
- 11.26 dx (0)
- 11.27 export (9)
- 11.28 export_users (9)
- 11.29 forward/latlong (8)
- 11.30 forward/opername (1)
- 11.31 help (0)
- 11.32 init (5)
- 11.33 kill (0)
- 11.34 kill (5)
- 11.35 kill full (5)
- 11.36 links (0)
- 11.37 load/aliases (9)
- 11.38 load/baddx (9)
- 11.39 load/badmsg (9)
- 11.40 load/badwords (9)
- 11.41 load/bands (9)
- 11.42 load/cmd_cache (9)
- 11.43 load/forward (9)
- 11.44 load/messages (9)
- 11.45 load/prefixes (9)
- 11.46 merge (5)
- 11.47 msg (9)
- 11.48 pc (8)
- 11.49 ping (1)
- 11.50 rcmd (1)
- 11.51 read (0)
- 11.52 read (extended for sysops) (5)
- 11.53 reject/announce
- 11.54 reject/announce (extended for sysops) (8)
- 11.55 reject/spots (0)
- 11.56 reject/spots (extended for sysops) (8)
- 11.57 reject/wcy (0)
- 11.58 reject/wcy (extended for sysops) (8)
- 11.59 reject/wwv (0)
- 11.60 reject/wwv (extended for sysops) (8)
- 11.61 reply (0)
- 11.62 send (0)
- 11.63 set/address (0)
- 11.64 set/announce (0)
- 11.65 set/arcluster (5)
- 11.66 set/badnode (6)
- 11.67 set/beep (0)
- 11.68 set/clx (5)
- 11.69 set/debug (9)
- 11.70 set/dx (0)
- 11.71 set/dxgrid (0)
- 11.72 set/dxnet (5)
- 11.73 set/echo (0)
- 11.74 set/here (0)
- 11.75 set/homenode (0)
- 11.76 set/hops (8)
- 11.77 set/isolate (9)
- 11.78 set/language (0)
- 11.79 set/location (0)
- 11.80 set/sys_location (9)
- 11.81 set/logininfo (0)
- 11.82 set/lockout (9)
- 11.83 set/name (0)
- 11.84 set/node (9)
- 11.85 set/obscount (9)
- 11.86 set/page (0)
- 11.87 set/password (9)
- 11.88 set/pinginterval (9)
- 11.89 set/privilege (9)
- 11.90 set/spider (5)
- 11.91 set/sys_qra (9)
- 11.92 set/qra (0)
- 11.93 set/qth (0)
- 11.94 set/talk (0)
- 11.95 set/wcy (0)
- 11.96 set/wwv (0)
- 11.97 set/wx (0)
- 11.98 show/badnode (6)
- 11.99 show/date (0)
- 11.100 show/dx (0)
- 11.101 show/dxcc (0)
- 11.102 show/files (0)
- 11.103 show/filter (0)
- 11.104 show/filter (extended for sysops) (5)
- 11.105 show/hops (8)
- 11.106 show/isolate (1)
- 11.107 show/lockout (9)
- 11.108 show/moon (0)
- 11.109 show/muf (0)
- 11.110 show/node (1)
- 11.111 show/prefix (0)
- 11.112 show/program (5)
- 11.113 show/qra (0)
- 11.114 show/qrz (0)
- 11.115 show/route (0)
- 11.116 show/satellite (0)
- 11.117 show/sun (0)
- 11.118 show/time (0)
- 11.119 show/wcy (0)
- 11.120 show/wwv (0)
- 11.121 shutdown (5)
- 11.122 spoof (9)
- 11.123 stat/db (5)
- 11.124 stat/channel (5)
- 11.125 stat/msg (5)
- 11.126 stat/user (5)
- 11.127 sysop (0)
- 11.128 talk (0)
- 11.129 type (0)
- 11.130 who (0)
- 11.131 wx (0)
- 11.132 wx (enhanced for sysops) (5)
-
+ 9. Mail
+
+ 9.1 Personal mail
+ 9.2 Bulletin mail
+ 9.3 Forward.pl
+ 9.4 The msg command
+ 9.5 Message status
+ 9.6 Filtering mail
+ 9.7 Distribution lists
+ 9.8 BBS interface
+
+ 10. Information, files and useful programs
+
+ 10.1 MOTD
+ 10.2 Downtime message
+ 10.3 Other text messages
+ 10.4 The Aliases file
+ 10.5 Console.pl
+ 10.6 Updating kepler data
+
+ 11. CVS
+
+ 12. The DXSpider command set
+
+ 12.1 accept/announce (0)
+ 12.2 accept/announce (extended for sysops) (8)
+ 12.3 accept/spots (0)
+ 12.4 accept/spots (extended for sysops) (8)
+ 12.5 accept/wcy (0)
+ 12.6 accept/wcy (extended for sysops) (8)
+ 12.7 accept/wwv (0)
+ 12.8 accept/wwv (extended for sysops) (8)
+ 12.9 announce (0)
+ 12.10 announce full (0)
+ 12.11 announce sysop (5)
+ 12.12 apropos (0)
+ 12.13 bye (0)
+ 12.14 catchup (5)
+ 12.15 clear/spots (0)
+ 12.16 connect (5)
+ 12.17 dbavail (0)
+ 12.18 dbcreate (9)
+ 12.19 dbimport (9)
+ 12.20 dbremove (9)
+ 12.21 dbshow (0)
+ 12.22 debug (9)
+ 12.23 directory (0)
+ 12.24 directory (extended for sysops) (5)
+ 12.25 disconnect (8)
+ 12.26 dx (0)
+ 12.27 export (9)
+ 12.28 export_users (9)
+ 12.29 forward/latlong (8)
+ 12.30 forward/opername (1)
+ 12.31 help (0)
+ 12.32 init (5)
+ 12.33 kill (0)
+ 12.34 kill (5)
+ 12.35 kill full (5)
+ 12.36 links (0)
+ 12.37 load/aliases (9)
+ 12.38 load/baddx (9)
+ 12.39 load/badmsg (9)
+ 12.40 load/badwords (9)
+ 12.41 load/bands (9)
+ 12.42 load/cmd_cache (9)
+ 12.43 load/forward (9)
+ 12.44 load/messages (9)
+ 12.45 load/prefixes (9)
+ 12.46 merge (5)
+ 12.47 msg (9)
+ 12.48 pc (8)
+ 12.49 ping (1)
+ 12.50 rcmd (1)
+ 12.51 read (0)
+ 12.52 read (extended for sysops) (5)
+ 12.53 reject/announce
+ 12.54 reject/announce (extended for sysops) (8)
+ 12.55 reject/spots (0)
+ 12.56 reject/spots (extended for sysops) (8)
+ 12.57 reject/wcy (0)
+ 12.58 reject/wcy (extended for sysops) (8)
+ 12.59 reject/wwv (0)
+ 12.60 reject/wwv (extended for sysops) (8)
+ 12.61 reply (0)
+ 12.62 send (0)
+ 12.63 set/address (0)
+ 12.64 set/announce (0)
+ 12.65 set/arcluster (5)
+ 12.66 set/baddx (8)
+ 12.67 set/badnode (6)
+ 12.68 set/badspotter (8)
+ 12.69 set/beep (0)
+ 12.70 set/clx (5)
+ 12.71 set/debug (9)
+ 12.72 set/dx (0)
+ 12.73 set/dxgrid (0)
+ 12.74 set/dxnet (5)
+ 12.75 set/echo (0)
+ 12.76 set/here (0)
+ 12.77 set/homenode (0)
+ 12.78 set/hops (8)
+ 12.79 set/isolate (9)
+ 12.80 set/language (0)
+ 12.81 set/location (0)
+ 12.82 set/sys_location (9)
+ 12.83 set/logininfo (0)
+ 12.84 set/lockout (9)
+ 12.85 set/name (0)
+ 12.86 set/node (9)
+ 12.87 set/obscount (9)
+ 12.88 set/page (0)
+ 12.89 set/password (9)
+ 12.90 set/pinginterval (9)
+ 12.91 set/privilege (9)
+ 12.92 set/spider (5)
+ 12.93 set/sys_qra (9)
+ 12.94 set/qra (0)
+ 12.95 set/qth (0)
+ 12.96 set/talk (0)
+ 12.97 set/wcy (0)
+ 12.98 set/wwv (0)
+ 12.99 set/wx (0)
+ 12.100 show/baddx (1)
+ 12.101 show/badnode (6)
+ 12.102 show/badspotter (1)
+ 12.103 show/date (0)
+ 12.104 show/dx (0)
+ 12.105 show/dxcc (0)
+ 12.106 show/files (0)
+ 12.107 show/filter (0)
+ 12.108 show/filter (extended for sysops) (5)
+ 12.109 show/hops (8)
+ 12.110 show/isolate (1)
+ 12.111 show/lockout (9)
+ 12.112 show/moon (0)
+ 12.113 show/muf (0)
+ 12.114 show/node (1)
+ 12.115 show/prefix (0)
+ 12.116 show/program (5)
+ 12.117 show/qra (0)
+ 12.118 show/qrz (0)
+ 12.119 show/route (0)
+ 12.120 show/satellite (0)
+ 12.121 show/sun (0)
+ 12.122 show/time (0)
+ 12.123 show/wcy (0)
+ 12.124 show/wwv (0)
+ 12.125 shutdown (5)
+ 12.126 spoof (9)
+ 12.127 stat/db (5)
+ 12.128 stat/channel (5)
+ 12.129 stat/msg (5)
+ 12.130 stat/user (5)
+ 12.131 sysop (0)
+ 12.132 talk (0)
+ 12.133 type (0)
+ 12.134 who (0)
+ 12.135 wx (0)
+ 12.136 wx (enhanced for sysops) (5)
______________________________________________________________________
1\b1.\b. I\bIn\bns\bst\bta\bal\bll\bla\bat\bti\bio\bon\bn (\b(O\bOr\bri\big\bgi\bin\bna\bal\bl v\bve\ber\brs\bsi\bio\bon\bn b\bby\by I\bIa\bai\bin\bn P\bPh\bhi\bil\bll\bli\bip\bps\bs,\b, G\bG0\b0R\bRD\bDI\bI)\b)
- Last modified: 03 January 2001 by Ian Maude, G0VGS
-
-
1\b1.\b.1\b1.\b. I\bIn\bnt\btr\bro\bod\bdu\buc\bct\bti\bio\bon\bn
This section describes the installation of DX Spider v1.35 on a RedHat
the above list as the earliest versions usable.
+
1\b1.\b.2\b2.\b. P\bPr\bre\bep\bpa\bar\bra\bat\bti\bio\bon\bn
I will assume that you have already downloaded the latest tarball of
callsign (this will be used as an alias) and root. The finished line
in /etc/group should look something like this
+
spider:x:251:sysop,g0vgs,root
# find . -type d -exec chmod 2775 {} \;
# find . -type f -exec chmod 775 {} \;
+
+
+
+
This last step allows various users of the group _\bs_\bp_\bi_\bd_\be_\br to have write
access to all the directories. This is not really needed just yet but
will be useful when web interfaces start to appear.
There appears to be an extra slash in there. However this has to be
there for the file to work so leave it in.
-
-
P\bPL\bLE\bEA\bAS\bSE\bE U\bUS\bSE\bE C\bCA\bAP\bPI\bIT\bTA\bAL\bL L\bLE\bET\bTT\bTE\bER\bRS\bS F\bFO\bOR\bR C\bCA\bAL\bLL\bLS\bSI\bIG\bGN\bNS\bS
- $ cd ../perl
+ $ cd ../perl
If you do, congratulations! If not, look over the instructions again,
you have probably missed something out. You can shut spider down
again with the command ....
+
+
+
shutdown
spdlogin 8000/tcp # spider anonymous login port
-
-
Then add a line in /etc/inetd.conf like this ....
- killall -HUP inetd
+ killall -HUP inetd
any major differences at the moment, it allows for compatibility. The
4 types are ...
-
-
set/node (AK1A type)
set/spider
set/dxnet
-
-
-
-
-
-
-
-
# All lines starting with a # are ignored, as are completely
blank lines.
- timeout 15
- connect telnet dirkl.tobit.co.uk
- # tell GB7DJK-1 that it is connected to GB7DJK
- # you can leave this out if you call this script 'gb7djk'
- client gb7djk telnet
+
+
+ timeout 15
+ connect telnet dirkl.tobit.co.uk
+ # tell GB7DJK-1 that it is connected to GB7DJK
+ # you can leave this out if you call this script 'gb7djk'
+ client gb7djk telnet
+
+
+
Both these examples assume that everything is set up properly at the
avoid this use the following line ...
+
+
+
+
+
+
In a script, this might look like ...
+
The callsign involved will be the callsign of the cluster node you are
going to connect to. This will now check every 10 minutes to see if
gb7xxx is connected, if it is then nothing will be done. If it is
- #
- # hop table construction
- #
- package DXProt;
- # default hopcount to use
- $def_hopcount = 5;
- # some variable hop counts based on message type
- %hopcount =
- (
- 11 => 10,
- 16 => 10,
- 17 => 10,
- 19 => 10,
- 21 => 10,
- );
- # the per node hop control thingy
- %nodehops =
- GB7ADX => { 11 => 8,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- GB7UDX => { 11 => 8,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- GB7BAA => {
- 11 => 5,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- };
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ #
+ # hop table construction
+ #
+
+ package DXProt;
+
+ # default hopcount to use
+ $def_hopcount = 5;
+
+ # some variable hop counts based on message type
+ %hopcount =
+ (
+ 11 => 10,
+ 16 => 10,
+ 17 => 10,
+ 19 => 10,
+ 21 => 10,
+ );
+
+
+ # the per node hop control thingy
+
+
+ %nodehops =
+
+ GB7ADX => { 11 => 8,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+
+ GB7UDX => { 11 => 8,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+ GB7BAA => {
+ 11 => 5,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+ };
+
+
will bring your changes into effect.
+
5\b5.\b.2\b2.\b. I\bIs\bso\bol\bla\bat\bti\bin\bng\bg n\bne\bet\btw\bwo\bor\brk\bks\bs
It is possible to isolate networks from each other on a "gateway" node
This is very simple and only 2 possible states exist, accept (1) or
drop (0).
+
The second element is the field_no. There are 13 possiblities to
choose from here ....
- 0 = frequency
- 1 = call
- 2 = date in unix format
- 3 = comment
- 4 = spotter
- 5 = spotted dxcc country
- 6 = spotter's dxcc country
- 7 = origin
- 8 = spotted itu
- 9 = spotted cq
- 10 = spotter's itu
- 11 = spotter's cq
- 12 = callsign of the channel on which the spot has appeared
+
+
+
+
+
+ 0 = frequency
+ 1 = call
+ 2 = date in unix format
+ 3 = comment
+ 4 = spotter
+ 5 = spotted dxcc country
+ 6 = spotter's dxcc country
+ 7 = origin
+ 8 = spotted itu
+ 9 = spotted cq
+ 10 = spotter's itu
+ 11 = spotter's cq
+ 12 = callsign of the channel on which the spot has appeared
a list of letters separated by the pipe symbol.
+
What this line does is tell the program to drop any spots posted by
anyone in the USA, Canada or Japan.
[ 0, 0, 'd', 0 ]
];
+
+
+
+
In this example, only the prefixes listed will be allowed. It is
possible to be quite specific. The Dutch prefix "P" is followed by
several secondary identifiers which are allowed. So, in the example,
etc in a particular country.
- 8\b8.\b.2\b2.\b. F\bFi\bil\blt\bte\ber\bri\bin\bng\bg D\bDX\bX c\bca\bal\bll\blo\bou\but\bts\bs
+ 8\b8.\b.2\b2.\b. F\bFi\bil\blt\bte\ber\bri\bin\bng\bg D\bDX\bX c\bca\bal\bll\blo\bou\but\bts\bs (\b(D\bDe\bep\bpr\bri\bic\bca\bat\bte\bed\bd)\b)
+
+ _\bF_\br_\bo_\bm _\bv_\be_\br_\bs_\bi_\bo_\bn _\b1_\b._\b4_\b7_\b, _\bt_\bh_\bi_\bs _\bm_\be_\bt_\bh_\bo_\bd _\bi_\bs _\br_\be_\bp_\bl_\ba_\bc_\be_\bd _\bb_\by _\bt_\bh_\be _\bc_\bo_\bm_\bm_\ba_\bn_\bd _\bs_\be_\bt_\b/_\bb_\ba_\bd_\bd_\bx
+
In the same way as mail, there are some types of spot we do not wish
to pass on to users or linked cluster nodes. In the /spider/data
-
-
-
# the list of dx spot addresses that we don't store and don't pass on
load/badwords.
- 9\b9.\b. I\bIn\bnf\bfo\bor\brm\bma\bat\bti\bio\bon\bn,\b, f\bfi\bil\ble\bes\bs a\ban\bnd\bd u\bus\bse\bef\bfu\bul\bl p\bpr\bro\bog\bgr\bra\bam\bms\bs
+ 9\b9.\b. M\bMa\bai\bil\bl
+
+ DXSpider deals seamlessly with standard AK1A type mail. It supports
+ both personal and bulletin mail and the sysop has additional commands
+ to ensure that mail gets to where it is meant. DXSpider will send
+ mail almost immediately, assuming that the target is on line.
+ However, only one mail message is dealt with at any one time. If a
+ mail message is already being sent or recieved, then the new message
+ will be queued until it has finished.
+
+ The cluster mail is automatically deleted after 30 days unless the
+ sysop sets the "keep" flag using the _\bm_\bs_\bg command.
+
+ 9\b9.\b.1\b1.\b. P\bPe\ber\brs\bso\bon\bna\bal\bl m\bma\bai\bil\bl
+
+ Personal mail is sent using the _\bs_\bp command. This is actually the
+ default method of sending mail and so a simple _\bs for send will do. A
+ full list of the send commands and options is in the _\bc_\bo_\bm_\bm_\ba_\bn_\bd _\bs_\be_\bt
+ section, so I will not duplicate them here.
+
+
+ 9\b9.\b.2\b2.\b. B\bBu\bul\bll\ble\bet\bti\bin\bn m\bma\bai\bil\bl
+
+ Bulletin mail is sent by using the _\bs_\bb command. This is one of the
+ most common mistakes users make when sending mail. They send a
+ bulletin mail with _\bs or _\bs_\bp instead of _\bs_\bb and of course the message
+ never leaves the cluster. This can be rectified by the sysop by using
+ the _\bm_\bs_\bg command.
+
+
+ Bulletin addresses can be set using the Forward.pl file.
+
+
+ 9\b9.\b.3\b3.\b. F\bFo\bor\brw\bwa\bar\brd\bd.\b.p\bpl\bl
+
+ DXSpider receives all and any mail sent to it without any alterations
+ needed in files. Because personal and bulletin mail are treated
+ differently, there is no need for a list of accepted bulletin
+ addresses. It is necessary, however, to tell the program which links
+ accept which bulletins. For example, it is pointless sending
+ bulletins addresses to "UK" to any links other than UK ones. The file
+ that does this is called forward.pl and lives in /spider/msg. At
+ default, like other spider files it is named forward.pl.issue. Rename
+ it to forward.pl and edit the file to match your requirements. The
+ format is below ...
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ #
+ # this is an example message forwarding file for the system
+ #
+ # The format of each line is as follows
+ #
+ # type to/from/at pattern action destinations
+ # P/B/F T/F/A regex I/F [ call [, call ...] ]
+ #
+ # type: P - private, B - bulletin (msg), F - file (ak1a bull)
+ # to/from/at: T - to field, F - from field, A - home bbs, O - origin
+ # pattern: a perl regex on the field requested
+ # action: I - ignore, F - forward
+ # destinations: a reference to an array containing node callsigns
+ #
+ # if it is non-private and isn't in here then it won't get forwarded
+ #
+ # Currently only type B msgs are affected by this code.
+ #
+ # The list is read from the top down, the first pattern that matches
+ # causes the action to be taken.
+ #
+ # The pattern can be undef or 0 in which case it will always be selected
+ # for the action specified
+ #
+ # If the BBS list is undef or 0 and the action is 'F' (and it matches the
+ # pattern) then it will always be forwarded to every node that doesn't have
+ # it (I strongly recommend you don't use this unless you REALLY mean it, if
+ # you allow a new link with this on EVERY bull will be forwarded immediately
+ # on first connection)
+ #
+
+ package DXMsg;
+
+ @forward = (
+ );
+
+
+
+
+ Simply insert a bulletin address and state in the brackets where you
+ wish that mail to go. For example, you can see here that mail sent to
+ "UK" will only be sent to the UK links and not to PA4AB-14.
+
+
+ To force the cluster to reread the file use load/forward
+
+
+
+ 9\b9.\b.4\b4.\b. T\bTh\bhe\be m\bms\bsg\bg c\bco\bom\bmm\bma\ban\bnd\bd
+
+ The _\bm_\bs_\bg command is a very powerful and flexible tool for the sysop.
+ It allows the sysop to alter to and from fields and make other changes
+ to manage the cluster mail.
+
+ Here is a full list of the various options ...
+
+
+
+
+
+
+
+
+
+
+
+ MSG TO <msgno> <call> - change TO callsign to <call>
+ MSG FRom <msgno> <call> - change FROM callsign to <call>
+ MSG PRrivate <msgno> - set private flag
+ MSG NOPRrivate <msgno> - unset private flag
+ MSG RR <msgno> - set RR flag
+ MSG NORR <msgno> - unset RR flag
+ MSG KEep <msgno> - set the keep flag (message won't be deleted ever)
+ MSG NOKEep <msgno> - unset the keep flag
+ MSG SUbject <msgno> <new> - change the subject to <new>
+ MSG WAittime <msgno> - remove any waiting time for this message
+ MSG NOREad <msgno> - mark message as unread
+ MSG REad <msgno> - mark message as read
+ MSG QUeue - queue any outstanding bulletins
+ MSG QUeue 1 - queue any outstanding private messages
+
+
+
+
+ These commands are simply typed from within the cluster as the sysop
+ user.
+
+
+ 9\b9.\b.5\b5.\b. M\bMe\bes\bss\bsa\bag\bge\be s\bst\bta\bat\btu\bus\bs
+
+ You can check on a message from within the cluster by using the
+ command _\bs_\bt_\ba_\bt_\b/_\bm_\bs_\bg. This will give you additional information on the
+ message number including which nodes have received it, which node it
+ was received from and when etc. Here is an example of the output of
+ the command ...
+
+
+
+ G0VGS de GB7MBC 28-Jan-2001 1308Z >
+ stat/msg 6869
+ From: GB7DJK
+ Msg Time: 26-Jan-2001 1302Z
+ Msgno: 6869
+ Origin: GB7DJK
+ Size: 8012
+ Subject: AMSAT 2line KEPS 01025.AMSAT
+ To: UK
+ Got it Nodes: GB7BAA, GB7ADX
+ Private: 0
+ Read Confirm: 0
+ Times read: 0
+ G0VGS de GB7MBC 28-Jan-2001 1308Z >
+
+
- 9\b9.\b.1\b1.\b. M\bMO\bOT\bTD\bD
+
+
+ 9\b9.\b.6\b6.\b. F\bFi\bil\blt\bte\ber\bri\bin\bng\bg m\bma\bai\bil\bl
+
+ This is described in the section on _\bO_\bt_\bh_\be_\br _\bf_\bi_\bl_\bt_\be_\br_\bs so I will not
+ duplicate it here.
+
+
+ 9\b9.\b.7\b7.\b. D\bDi\bis\bst\btr\bri\bib\bbu\but\bti\bio\bon\bn l\bli\bis\bst\bts\bs
+
+ Distribution lists are simply a list of users to send certain types of
+ mail to. An example of this is mail you only wish to send to other
+ sysops. In /spider/msg there is a directory called _\bd_\bi_\bs_\bt_\br_\bo. You put
+ any distibution lists in here. For example, here is a file called
+ SYSOP.pl that caters for the UK sysops.
+
+
+ qw(GB7TLH GB7DJK GB7DXM GB7CDX GB7BPQ GB7DXN GB7MBC GB7MBC-6 GB7MDX
+ GB7NDX GB7SDX GB7TDX GB7UDX GB7YDX GB7ADX GB7BAA GB7DXA GB7DXH
+ GB7DXK GB7DXI GB7DXS)
+
+
+
+
+ Any mail sent to "sysop" would only be sent to the callsigns in this
+ list.
+
+
+ 9\b9.\b.8\b8.\b. B\bBB\bBS\bS i\bin\bnt\bte\ber\brf\bfa\bac\bce\be
+
+ Spider provides a simple BBS interface. No input is required from the
+ sysop of the cluster at all. The BBS simply sets the cluster as a BBS
+ and pushes any required mail to the cluster. No mail can flow from
+ Spider to the BBS, the interface is one-way.
+
+
+ Please be careful not to flood the cluster network with unnecessary
+ mail. Make sure you only send mail to the clusters that want it by
+ using the Forward.pl file very carefully.
+
+
+ 1\b10\b0.\b. I\bIn\bnf\bfo\bor\brm\bma\bat\bti\bio\bon\bn,\b, f\bfi\bil\ble\bes\bs a\ban\bnd\bd u\bus\bse\bef\bfu\bul\bl p\bpr\bro\bog\bgr\bra\bam\bms\bs
+
+ 1\b10\b0.\b.1\b1.\b. M\bMO\bOT\bTD\bD
One of the more important things a cluster sysop needs to do is to get
information to his users. The simplest way to do this is to have a
to the cluster.
- 9\b9.\b.2\b2.\b. D\bDo\bow\bwn\bnt\bti\bim\bme\be m\bme\bes\bss\bsa\bag\bge\be
+ 1\b10\b0.\b.2\b2.\b. D\bDo\bow\bwn\bnt\bti\bim\bme\be m\bme\bes\bss\bsa\bag\bge\be
If for any reason the cluster is down, maybe for upgrade or
maintenance but the machine is still running, a message can be sent to
actually running.
- 9\b9.\b.3\b3.\b. O\bOt\bth\bhe\ber\br t\bte\bex\bxt\bt m\bme\bes\bss\bsa\bag\bge\bes\bs
+ 1\b10\b0.\b.3\b3.\b. O\bOt\bth\bhe\ber\br t\bte\bex\bxt\bt m\bme\bes\bss\bsa\bag\bge\bes\bs
You can set other text messages to be read by the user if they input
the file name. This could be for news items or maybe information for
They can be read by the user by typing the command ....
-
-
type news
+
You can see that in the files area (basically the packclus directory)
there is a file called _\bn_\be_\bw_\bs and a directory called _\bb_\bu_\bl_\bl_\be_\bt_\bi_\bn_\bs. You can
also see that dates they were created. In the case of the file _\bn_\be_\bw_\bs,
- show/files bulletins
- opdx390 21381 29-Nov-1999 1621Z opdx390.1 1670 29-Nov-1999 1621Z
- opdx390.2 2193 29-Nov-1999 1621Z opdx391 25045 29-Nov-1999 1621Z
- opdx392 35969 29-Nov-1999 1621Z opdx393 15023 29-Nov-1999 1621Z
- opdx394 33429 29-Nov-1999 1621Z opdx394.1 3116 29-Nov-1999 1621Z
- opdx395 24319 29-Nov-1999 1621Z opdx396 32647 29-Nov-1999 1621Z
- opdx396.1 5537 29-Nov-1999 1621Z opdx396.2 6242 29-Nov-1999 1621Z
- opdx397 18433 29-Nov-1999 1621Z opdx398 19961 29-Nov-1999 1621Z
- opdx399 17719 29-Nov-1999 1621Z opdx400 19600 29-Nov-1999 1621Z
- opdx401 27738 29-Nov-1999 1621Z opdx402 18698 29-Nov-1999 1621Z
- opdx403 24994 29-Nov-1999 1621Z opdx404 15685 29-Nov-1999 1621Z
- opdx405 13984 29-Nov-1999 1621Z opdx405.1 4166 29-Nov-1999 1621Z
- opdx406 28934 29-Nov-1999 1621Z opdx407 24153 29-Nov-1999 1621Z
- opdx408 15081 29-Nov-1999 1621Z opdx409 23234 29-Nov-1999 1621Z
- Press Enter to continue, A to abort (16 lines) >
+
+
+
+
+
+
+
+
+
+
+
+
+ show/files bulletins
+ opdx390 21381 29-Nov-1999 1621Z opdx390.1 1670 29-Nov-1999 1621Z
+ opdx390.2 2193 29-Nov-1999 1621Z opdx391 25045 29-Nov-1999 1621Z
+ opdx392 35969 29-Nov-1999 1621Z opdx393 15023 29-Nov-1999 1621Z
+ opdx394 33429 29-Nov-1999 1621Z opdx394.1 3116 29-Nov-1999 1621Z
+ opdx395 24319 29-Nov-1999 1621Z opdx396 32647 29-Nov-1999 1621Z
+ opdx396.1 5537 29-Nov-1999 1621Z opdx396.2 6242 29-Nov-1999 1621Z
+ opdx397 18433 29-Nov-1999 1621Z opdx398 19961 29-Nov-1999 1621Z
+ opdx399 17719 29-Nov-1999 1621Z opdx400 19600 29-Nov-1999 1621Z
+ opdx401 27738 29-Nov-1999 1621Z opdx402 18698 29-Nov-1999 1621Z
+ opdx403 24994 29-Nov-1999 1621Z opdx404 15685 29-Nov-1999 1621Z
+ opdx405 13984 29-Nov-1999 1621Z opdx405.1 4166 29-Nov-1999 1621Z
+ opdx406 28934 29-Nov-1999 1621Z opdx407 24153 29-Nov-1999 1621Z
+ opdx408 15081 29-Nov-1999 1621Z opdx409 23234 29-Nov-1999 1621Z
+ Press Enter to continue, A to abort (16 lines) >
The page length will of course depend on what you have it set to!
- 9\b9.\b.4\b4.\b. T\bTh\bhe\be A\bAl\bli\bia\bas\bse\bes\bs f\bfi\bil\ble\be
+ 1\b10\b0.\b.4\b4.\b. T\bTh\bhe\be A\bAl\bli\bia\bas\bse\bes\bs f\bfi\bil\ble\be
You will find a file in /spider/cmd/ called Aliases. First, copy this
file to /spider/local_cmd/Aliases and edit this file. You will see
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
#!/usr/bin/perl
# provide some standard aliases for commands for terminally
the results once you have set an alias.
- 9\b9.\b.5\b5.\b. F\bFo\bor\brw\bwa\bar\brd\bd.\b.p\bpl\bl
+ 1\b10\b0.\b.5\b5.\b. C\bCo\bon\bns\bso\bol\ble\be.\b.p\bpl\bl
- DXSpider receives all and any mail sent to it without any alterations
- needed in files. Because personal and bulletin mail are treated
- differently, there is no need for a list of accepted bulletin
- addresses. It is necessary, however, to tell the program which links
- accept which bulletins. For example, it is pointless sending
- bulletins addresses to "UK" to any links other than UK ones. The file
- that does this is called forward.pl and lives in /spider/msg. At
- default, like other spider files it is named forward.pl.issue. Rename
- it to forward.pl and edit the file to match your requirements. The
- format is below ...
+ In later versions of Spider a simple console program is provided for
+ the sysop. This has a type ahead buffer with line editing facilities
+ and colour for spots, announces etc. To use this program, simply use
+ console.pl instead of client.pl.
+ To edit the colours, copy /spider/perl/Console.pl to /spider/local and
+ edit the file with your favourite editor.
- #
- # this is an example message forwarding file for the system
- #
- # The format of each line is as follows
- #
- # type to/from/at pattern action destinations
- # P/B/F T/F/A regex I/F [ call [, call ...] ]
- #
- # type: P - private, B - bulletin (msg), F - file (ak1a bull)
- # to/from/at: T - to field, F - from field, A - home bbs, O - origin
- # pattern: a perl regex on the field requested
- # action: I - ignore, F - forward
- # destinations: a reference to an array containing node callsigns
- #
- # if it is non-private and isn't in here then it won't get forwarded
- #
- # Currently only type B msgs are affected by this code.
- #
- # The list is read from the top down, the first pattern that matches
- # causes the action to be taken.
- #
- # The pattern can be undef or 0 in which case it will always be selected
- # for the action specified
- #
- # If the BBS list is undef or 0 and the action is 'F' (and it matches the
- # pattern) then it will always be forwarded to every node that doesn't have
- # it (I strongly recommend you don't use this unless you REALLY mean it, if
- # you allow a new link with this on EVERY bull will be forwarded immediately
- # on first connection)
- #
- package DXMsg;
+ 1\b10\b0.\b.6\b6.\b. U\bUp\bpd\bda\bat\bti\bin\bng\bg k\bke\bep\bpl\ble\ber\br d\bda\bat\bta\ba
- @forward = (
- );
+ Spider has a powerful and flexible show/satellite command. In order
+ for this to be accurate, the kepler data has to be updated regularly.
+ In general, this data is available as an email or via cluster mail.
+ Updating it is simple. First you need to export the mail message as a
+ file. You do this with the _\be_\bx_\bp_\bo_\br_\bt command from the cluster prompt as
+ the sysop. For example ...
+ export 5467 /spider/perl/keps.in
- Simply insert a bulletin address and state in the brackets where you
- wish that mail to go. For example, you can see here that mail sent to
- "UK" will only be sent to the UK links and not to PA4AB-14.
- To force the cluster to reread the file use load/forward
+ would export message number 5467 as a file called keps.in in the
+ /spider/perl directory.
- 9\b9.\b.6\b6.\b. D\bDi\bis\bst\btr\bri\bib\bbu\but\bti\bio\bon\bn l\bli\bis\bst\bts\bs
+ Now login to a VT as sysop and cd /spider/perl. There is a command in
+ the perl directory called _\bc_\bo_\bn_\bv_\bk_\be_\bp_\bs_\b._\bp_\bl. All we need to do now is
+ convert the file like so ...
- Distribution lists are simply a list of users to send certain types of
- mail to. An example of this is mail you only wish to send to other
- sysops. In /spider/msg there is a directory called _\bd_\bi_\bs_\bt_\br_\bo. You put
- any distibution lists in here. For example, here is a file called
- SYSOP.pl that caters for the UK sysops.
+ ./convkeps.pl keps.in
- qw(GB7TLH GB7DJK GB7DXM GB7CDX GB7BPQ GB7DXN GB7MBC GB7MBC-6 GB7MDX
- GB7NDX GB7SDX GB7TDX GB7UDX GB7YDX GB7ADX GB7BAA GB7DXA GB7DXH
- GB7DXK GB7DXI GB7DXS)
+ Now go back to the cluster and issue the command ...
- Any mail sent to "sysop" would only be sent to the callsigns in this
- list.
- 9\b9.\b.7\b7.\b. C\bCo\bon\bns\bso\bol\ble\be.\b.p\bpl\bl
+ load/keps
- In later versions of Spider a simple console program is provided for
- the sysop. This has a type ahead buffer with line editing facilities
- and colour for spots, announces etc. To use this program, simply use
- console.pl instead of client.pl.
- To edit the colours, copy /spider/perl/Console.pl to /spider/local and
- edit the file with your favourite editor.
+ That is it! the kepler data has been updated.
- 1\b10\b0.\b. C\bCV\bVS\bS
+
+
+
+ 1\b11\b1.\b. C\bCV\bVS\bS
CVS stands for "Concurrent Versions System" and the CVS for DXSpider
is held at Sourceforge. This means that it is possible to update your
ENTIRE SPIDER TREE!!
-
Assuming you are connected to the Internet, you need to login to the
CVS repository and then update your Spider source. There are several
steps which are listed below ...
repository. You do this with the command below ...
- cvs -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/DXSpider login
+ cvs -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/dxspider login
current directory.
- cvs -z3 -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/DXSpider co spider
+ cvs -z3 -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/dxspider co spider
You will find any changes documented in the /spider/Changes file.
- 1\b11\b1.\b. T\bTh\bhe\be D\bDX\bXS\bSp\bpi\bid\bde\ber\br c\bco\bom\bmm\bma\ban\bnd\bd s\bse\bet\bt
+ 1\b12\b2.\b. T\bTh\bhe\be D\bDX\bXS\bSp\bpi\bid\bde\ber\br c\bco\bom\bmm\bma\ban\bnd\bd s\bse\bet\bt
Below is a complete list of commands available from the cluster
prompt. Most maintenance tasks are automatic but there are some
is the permissions level needed to use the command.
- 1\b11\b1.\b.1\b1.\b. a\bac\bcc\bce\bep\bpt\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(0\b0)\b)
+
+ 1\b12\b2.\b.1\b1.\b. a\bac\bcc\bce\bep\bpt\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(0\b0)\b)
a
\bac
\bcc
\bce
\bep
\bpt
\bt/
\b/a
\ban
\bnn
\bno
\bou
\bun
\bnc
\bce
\be [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Set an accept filter line for announce
+ info <string> eg: iota or qsl
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+ wx 1 filter WX announces
+ dest <prefixes> eg: 6MUK,WDX (distros)
+ some examples:-
+ acc/ann dest 6MUK
+ acc/ann 2 by_zone 14,15,16
+ (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
- info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
- wx 1 filter WX announces
- dest <prefixes> eg: 6MUK,WDX (distros)
-
-
-
- some examples:-
-
-
- acc/ann dest 6MUK
- acc/ann 2 by_zone 14,15,16
- (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
-
+ or
- or
+ acc/ann by G,M,2
- acc/ann by G,M,2
stations. You can use the tag 'all' to accept everything eg:
- acc/ann all
+
+ acc/ann all
+
but this probably for advanced users...
- 1\b11\b1.\b.2\b2.\b. a\bac\bcc\bce\bep\bpt\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
+
+ 1\b12\b2.\b.2\b2.\b. a\bac\bcc\bce\bep\bpt\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
a
\bac
\bcc
\bce
\bep
\bpt
\bt/
\b/a
\ban
\bnn
\bno
\bou
\bun
\bnc
\bce
\be <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b]<
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Announce filter sysop
version
the default for nodes and users eg:-
- accept/ann by G,M,2
- accept/ann input node_default by G,M,2
- accept/ann user_default by G,M,2
+ accept/ann by G,M,2
+ accept/ann input node_default by G,M,2
+ accept/ann user_default by G,M,2
- 1\b11\b1.\b.3\b3.\b. a\bac\bcc\bce\bep\bpt\bt/\b/s\bsp\bpo\bot\bts\bs (\b(0\b0)\b)
+
+
+ 1\b12\b2.\b.3\b3.\b. a\bac\bcc\bce\bep\bpt\bt/\b/s\bsp\bpo\bot\bts\bs (\b(0\b0)\b)
a
\bac
\bcc
\bce
\bep
\bpt
\bt/
\b/a
\ban
\bnn
\bno
\bou
\bun
\bnc
\bce
\be [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Set an accept filter line for spots
Create an 'accept this spot' line for a filter.
+
An accept filter line means that if the spot matches this filter it is
passed onto the user. See HELP FILTERS for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- origin <prefixes>
- channel <prefixes>
+
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+ call <prefixes> eg: G,PA,HB9
+ info <string> eg: iota or qsl
+ by <prefixes>
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ origin <prefixes>
+ channel <prefixes>
+
some examples:-
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
You can use the tag 'all' to accept everything, eg:
- acc/spot 3 all
+
+ acc/spot 3 all
+
but this probably for advanced users...
- 1\b11\b1.\b.4\b4.\b. a\bac\bcc\bce\bep\bpt\bt/\b/s\bsp\bpo\bot\bts\bs (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
+ 1\b12\b2.\b.4\b4.\b. a\bac\bcc\bce\bep\bpt\bt/\b/s\bsp\bpo\bot\bts\bs (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
a
\bac
\bcc
\bce
\bep
\bpt
\bt/
\b/s
\bsp
\bpo
\bot
\bts
\bs <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Spot filter sysop version
the default for nodes and users eg:-
- accept/spot db0sue-7 1 by_zone 14,15,16
- accept/spot node_default all
- set/hops node_default 10
- accept/spot user_default by G,M,2
+ accept/spot db0sue-7 1 by_zone 14,15,16
+ accept/spot node_default all
+ set/hops node_default 10
+
+ accept/spot user_default by G,M,2
- 1\b11\b1.\b.5\b5.\b. a\bac\bcc\bce\bep\bpt\bt/\b/w\bwc\bcy\by (\b(0\b0)\b)
+
+ 1\b12\b2.\b.5\b5.\b. a\bac\bcc\bce\bep\bpt\bt/\b/w\bwc\bcy\by (\b(0\b0)\b)
a
\bac
\bcc
\bce
\bep
\bpt
\bt/
\b/w
\bwc
\bcy
\by [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> set an accept WCY filter
can filter on the following fields:-
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
See HELP FILTER for information.
- 1\b11\b1.\b.6\b6.\b. a\bac\bcc\bce\bep\bpt\bt/\b/w\bwc\bcy\by (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
+
+ 1\b12\b2.\b.6\b6.\b. a\bac\bcc\bce\bep\bpt\bt/\b/w\bwc\bcy\by (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
a
\bac
\bcc
\bce
\bep
\bpt
\bt/
\b/w
\bwc
\bcy
\by <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> WCY filter sysop version
the default for nodes and users eg:-
- accept/wcy node_default all
- set/hops node_default 10
+ accept/wcy node_default all
+ set/hops node_default 10
- 1\b11\b1.\b.7\b7.\b. a\bac\bcc\bce\bep\bpt\bt/\b/w\bww\bwv\bv (\b(0\b0)\b)
+
+
+ 1\b12\b2.\b.7\b7.\b. a\bac\bcc\bce\bep\bpt\bt/\b/w\bww\bwv\bv (\b(0\b0)\b)
a
\bac
\bcc
\bce
\bep
\bpt
\bt/
\b/w
\bww
\bwv
\bv [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Set an accept WWV filter
can filter on the following fields:-
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+
for example
- accept/wwv by_zone 4
+
+ accept/wwv by_zone 4
+
See HELP FILTER for information.
- 1\b11\b1.\b.8\b8.\b. a\bac\bcc\bce\bep\bpt\bt/\b/w\bww\bwv\bv (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
+ 1\b12\b2.\b.8\b8.\b. a\bac\bcc\bce\bep\bpt\bt/\b/w\bww\bwv\bv (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
a
\bac
\bcc
\bce
\bep
\bpt
\bt/
\b/w
\bww
\bwv
\bv <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> WWV filter sysop version
the default for nodes and users eg:-
+
+
accept/wwv db0sue-7 1 by_zone 4
accept/wwv node_default all
set/hops node_default 10
- 1\b11\b1.\b.9\b9.\b. a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(0\b0)\b)
+
+ 1\b12\b2.\b.9\b9.\b. a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(0\b0)\b)
a\ban\bnn\bno\bou\bun\bnc\bce\be <\b<t\bte\bex\bxt\bt>\b> Send an announcement to local users
the announcement you wish to broadcast
- 1\b11\b1.\b.1\b10\b0.\b. a\ban\bnn\bno\bou\bun\bnc\bce\be f\bfu\bul\bll\bl (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b10\b0.\b. a\ban\bnn\bno\bou\bun\bnc\bce\be f\bfu\bul\bll\bl (\b(0\b0)\b)
a\ban\bnn\bno\bou\bun\bnc\bce\be f\bfu\bul\bll\bl <\b<t\bte\bex\bxt\bt>\b> Send an announcement cluster wide
- 1\b11\b1.\b.1\b11\b1.\b. a\ban\bnn\bno\bou\bun\bnc\bce\be s\bsy\bys\bso\bop\bp (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b11\b1.\b. a\ban\bnn\bno\bou\bun\bnc\bce\be s\bsy\bys\bso\bop\bp (\b(5\b5)\b)
a\ban\bnn\bno\bou\bun\bnc\bce\be s\bsy\bys\bso\bop\bp <\b<t\bte\bex\bxt\bt>\b>
Send an announcement to Sysops only
- 1\b11\b1.\b.1\b12\b2.\b. a\bap\bpr\bro\bop\bpo\bos\bs (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b12\b2.\b. a\bap\bpr\bro\bop\bpo\bos\bs (\b(0\b0)\b)
a\bap\bpr\bro\bop\bpo\bos\bs <\b<s\bst\btr\bri\bin\bng\bg>\b> Search the help database
Search the help database for <string> (it isn't case sensitive), and
print the names of all the commands that may be relevant.
- 1\b11\b1.\b.1\b13\b3.\b. b\bby\bye\be (\b(0\b0)\b)
+
+ 1\b12\b2.\b.1\b13\b3.\b. b\bby\bye\be (\b(0\b0)\b)
b\bby\bye\be Exit from the cluster
This will disconnect you from the cluster
- 1\b11\b1.\b.1\b14\b4.\b. c\bca\bat\btc\bch\bhu\bup\bp (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b14\b4.\b. c\bca\bat\btc\bch\bhu\bup\bp (\b(5\b5)\b)
c\bca\bat\btc\bch\bhu\bup\bp <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> A\bAl\bll\bl|\b|[\b[<\b<m\bms\bsg\bgn\bno\bo>\b> .\b..\b..\b.]\b] Mark a message as sent
This may well be ALL the non-private messages. You can prevent this by
using these commmands:-
+ catchup GB7DJK all
+ catchup GB7DJK 300 301 302 303 500-510
- catchup GB7DJK all
- catchup GB7DJK 300 301 302 303 500-510
and to undo what you have just done:-
- uncatchup GB7DJK all
- uncatchup GB7DJK 300 301 302 303 500-510
+
+ uncatchup GB7DJK all
+ uncatchup GB7DJK 300 301 302 303 500-510
+
Order is not important.
- 1\b11\b1.\b.1\b15\b5.\b. c\bcl\ble\bea\bar\br/\b/s\bsp\bpo\bot\bts\bs (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b15\b5.\b. c\bcl\ble\bea\bar\br/\b/s\bsp\bpo\bot\bts\bs (\b(0\b0)\b)
c\bcl\ble\bea\bar\br/\b/s\bsp\bpo\bot\bts\bs [\b[1\b1|\b|a\bal\bll\bl]\b] Clear a spot filter line
If you have a filter:-
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
and you say:-
- clear/spot 1
+
+ clear/spot 1
+
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
If you do:
- clear/spot all
+
+ clear/spot all
+
- 1\b11\b1.\b.1\b16\b6.\b. c\bco\bon\bnn\bne\bec\bct\bt (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b16\b6.\b. c\bco\bon\bnn\bne\bec\bct\bt (\b(5\b5)\b)
c\bco\bon\bnn\bne\bec\bct\bt <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Start a connection to another DX Cluster
cluster <callsign>.
- 1\b11\b1.\b.1\b17\b7.\b. d\bdb\bba\bav\bva\bai\bil\bl (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b17\b7.\b. d\bdb\bba\bav\bva\bai\bil\bl (\b(0\b0)\b)
d\bdb\bba\bav\bva\bai\bil\bl Show a list of all the databases in the system
defined in the system. It is also aliased to SHOW/COMMAND.
- 1\b11\b1.\b.1\b18\b8.\b. d\bdb\bbc\bcr\bre\bea\bat\bte\be (\b(9\b9)\b)
+ 1\b12\b2.\b.1\b18\b8.\b. d\bdb\bbc\bcr\bre\bea\bat\bte\be (\b(9\b9)\b)
d\bdb\bbc\bcr\bre\bea\bat\bte\be <\b<n\bna\bam\bme\be>\b> Create a database entry
d\bdb\bbc\bcr\bre\bea\bat\bte\be <\b<n\bna\bam\bme\be>\b> c\bch\bha\bai\bin\bn <\b<n\bna\bam\bme\be>\b> [\b[<\b<n\bna\bam\bme\be>\b>.\b..\b.]\b] Create a chained database
Databases can exist offsite. To define a database that lives on
another node do:
+
DBCREATE buckmaster remote gb7dxc
Remote databases cannot be chained; however, the last database in a a
To see what databases have been defined do:
+
DBAVAIL (or it will have been aliased to SHOW/COMMAND)
It would be normal for you to add an entry into your local Aliases
databases. See DBSHOW for generic database enquiry
- 1\b11\b1.\b.1\b19\b9.\b. d\bdb\bbi\bim\bmp\bpo\bor\brt\bt (\b(9\b9)\b)
+ 1\b12\b2.\b.1\b19\b9.\b. d\bdb\bbi\bim\bmp\bpo\bor\brt\bt (\b(9\b9)\b)
d\bdb\bbi\bim\bmp\bpo\bor\brt\bt <\b<d\bdb\bbn\bna\bam\bme\be>\b> Import AK1A data into a database
oblast database held locally.
- 1\b11\b1.\b.2\b20\b0.\b. d\bdb\bbr\bre\bem\bmo\bov\bve\be (\b(9\b9)\b)
+ 1\b12\b2.\b.2\b20\b0.\b. d\bdb\bbr\bre\bem\bmo\bov\bve\be (\b(9\b9)\b)
d\bdb\bbr\bre\bem\bmo\bov\bve\be <\b<d\bdb\bbn\bna\bam\bme\be>\b> Delete a database
For example:
-
DBREMOVE oblast
will remove the oblast database from the system and it will also
There is no warning, no comeback, no safety net.
+
You have been warned.
- 1\b11\b1.\b.2\b21\b1.\b. d\bdb\bbs\bsh\bho\bow\bw (\b(0\b0)\b)
+ 1\b12\b2.\b.2\b21\b1.\b. d\bdb\bbs\bsh\bho\bow\bw (\b(0\b0)\b)
d\bdb\bbs\bsh\bho\bow\bw <\b<d\bdb\bbn\bna\bam\bme\be>\b> <\b<k\bke\bey\by>\b> Display an entry, if it exists, in a database
enquiry such as:
- SH/BUCK G1TLH
+
+ SH/BUCK G1TLH
+
SHOW/COMMAND to find out) you can do the same thing with:
- DBSHOW buck G1TLH
+
+ DBSHOW buck G1TLH
- 1\b11\b1.\b.2\b22\b2.\b. d\bde\beb\bbu\bug\bg (\b(9\b9)\b)
+
+ 1\b12\b2.\b.2\b22\b2.\b. d\bde\beb\bbu\bug\bg (\b(9\b9)\b)
d\bde\beb\bbu\bug\bg Set the cluster program into debug mode
finished.
- 1\b11\b1.\b.2\b23\b3.\b. d\bdi\bir\bre\bec\bct\bto\bor\bry\by (\b(0\b0)\b)
+ 1\b12\b2.\b.2\b23\b3.\b. d\bdi\bir\bre\bec\bct\bto\bor\bry\by (\b(0\b0)\b)
d\bdi\bir\bre\bec\bct\bto\bor\bry\by List messages
d\bdi\bir\bre\bec\bct\bto\bor\bry\by o\bow\bwn\bn List your own messages
d\bdi\bir\bre\bec\bct\bto\bor\bry\by s\bsu\bub\bbj\bje\bec\bct\bt <\b<s\bst\btr\bri\bin\bng\bg>\b> List all messages with <string> in subject
d\bdi\bir\bre\bec\bct\bto\bor\bry\by <\b<n\bnn\bn>\b> List last <nn> messages
d\bdi\bir\bre\bec\bct\bto\bor\bry\by <\b<f\bfr\bro\bom\bm>\b>-\b-<\b<t\bto\bo>\b> List messages <from> message <to> message
+
+
List the messages in the messages directory.
+
If there is a 'p' one space after the message number then it is a
personal message. If there is a '-' between the message number and the
You can combine some of the various directory commands together eg:-
- DIR TO G1TLH 5
- or
- DIR SUBJECT IOTA 200-250
+
+ DIR TO G1TLH 5
+ or
+ DIR SUBJECT IOTA 200-250
+
syntax:-
- DIR/T G1* 10
- DIR/S QSL 10-100 5
+
+ DIR/T G1* 10
+ DIR/S QSL 10-100 5
- 1\b11\b1.\b.2\b24\b4.\b. d\bdi\bir\bre\bec\bct\bto\bor\bry\by (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
+
+ 1\b12\b2.\b.2\b24\b4.\b. d\bdi\bir\bre\bec\bct\bto\bor\bry\by (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
Works just like the user command except that sysops can see ALL
messages.
- 1\b11\b1.\b.2\b25\b5.\b. d\bdi\bis\bsc\bco\bon\bnn\bne\bec\bct\bt (\b(8\b8)\b)
+ 1\b12\b2.\b.2\b25\b5.\b. d\bdi\bis\bsc\bco\bon\bnn\bne\bec\bct\bt (\b(8\b8)\b)
d\bdi\bis\bsc\bco\bon\bnn\bne\bec\bct\bt <\b<c\bca\bal\bll\bl>\b> [\b[<\b<c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Disconnect a user or node
Disconnect any <call> connected locally
- 1\b11\b1.\b.2\b26\b6.\b. d\bdx\bx (\b(0\b0)\b)
+ 1\b12\b2.\b.2\b26\b6.\b. d\bdx\bx (\b(0\b0)\b)
d\bdx\bx [\b[b\bby\by <\b<c\bca\bal\bll\bl>\b>]\b] <\b<f\bfr\bre\beq\bq>\b> <\b<c\bca\bal\bll\bl>\b> <\b<r\bre\bem\bma\bar\brk\bks\bs>\b> Send a DX spot
enter the <freq> and the <call> either way round.
- DX FR0G 144.600
- DX 144.600 FR0G
- DX 144600 FR0G
+
+ DX FR0G 144.600
+ DX 144.600 FR0G
+ DX 144600 FR0G
+
the command and they will be added to the spot.
+
DX FR0G 144600 this is a test
You can credit someone else by saying:-
- DX by G1TLH FR0G 144.600 he isn't on the cluster
+
+ DX by G1TLH FR0G 144.600 he isn't on the cluster
+
cluster. See SHOW/BANDS for more information.
- 1\b11\b1.\b.2\b27\b7.\b. e\bex\bxp\bpo\bor\brt\bt (\b(9\b9)\b)
+ 1\b12\b2.\b.2\b27\b7.\b. e\bex\bxp\bpo\bor\brt\bt (\b(9\b9)\b)
e\bex\bxp\bpo\bor\brt\bt <\b<m\bms\bsg\bgn\bno\bo>\b> <\b<f\bfi\bil\ble\ben\bna\bam\bme\be>\b> Export a message to a file
EXPORT 2345 /tmp/a
- 1\b11\b1.\b.2\b28\b8.\b. e\bex\bxp\bpo\bor\brt\bt_\b_u\bus\bse\ber\brs\bs (\b(9\b9)\b)
+ 1\b12\b2.\b.2\b28\b8.\b. e\bex\bxp\bpo\bor\brt\bt_\b_u\bus\bse\ber\brs\bs (\b(9\b9)\b)
e\bex\bxp\bpo\bor\brt\bt_\b_u\bus\bse\ber\brs\bs [\b[<\b<f\bfi\bil\ble\ben\bna\bam\bme\be>\b>]\b] Export the users database to ascii
check is made on the filename (if any) that you specify.
- 1\b11\b1.\b.2\b29\b9.\b. f\bfo\bor\brw\bwa\bar\brd\bd/\b/l\bla\bat\btl\blo\bon\bng\bg (\b(8\b8)\b)
+ 1\b12\b2.\b.2\b29\b9.\b. f\bfo\bor\brw\bwa\bar\brd\bd/\b/l\bla\bat\btl\blo\bon\bng\bg (\b(8\b8)\b)
f\bfo\bor\brw\bwa\bar\brd\bd/\b/l\bla\bat\btl\blo\bon\bng\bg <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> Send latitude and longitude information to
another cluster
so it is not recommended on slow links.
- 1\b11\b1.\b.3\b30\b0.\b. f\bfo\bor\brw\bwa\bar\brd\bd/\b/o\bop\bpe\ber\brn\bna\bam\bme\be (\b(1\b1)\b)
+ 1\b12\b2.\b.3\b30\b0.\b. f\bfo\bor\brw\bwa\bar\brd\bd/\b/o\bop\bpe\ber\brn\bna\bam\bme\be (\b(1\b1)\b)
f\bfo\bor\brw\bwa\bar\brd\bd/\b/o\bop\bpe\ber\brn\bna\bam\bme\be <\b<c\bca\bal\bll\bl>\b> Send out information on this <call> to all
clusters
-
This command sends out any information held in the user file which can
be broadcast in PC41 protocol packets. This information is Name, QTH,
Location and Homenode. PC41s are only sent for the information that is
available.
- 1\b11\b1.\b.3\b31\b1.\b. h\bhe\bel\blp\bp (\b(0\b0)\b)
+ 1\b12\b2.\b.3\b31\b1.\b. h\bhe\bel\blp\bp (\b(0\b0)\b)
h\bhe\bel\blp\bp <\b<c\bcm\bmd\bd>\b> Get help on a command
commands to look at with HELP.
- 1\b11\b1.\b.3\b32\b2.\b. i\bin\bni\bit\bt (\b(5\b5)\b)
+ 1\b12\b2.\b.3\b32\b2.\b. i\bin\bni\bit\bt (\b(5\b5)\b)
i\bin\bni\bit\bt <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> Re-initialise a link to an AK1A compatible node
Best of luck - you will need it.
- 1\b11\b1.\b.3\b33\b3.\b. k\bki\bil\bll\bl (\b(0\b0)\b)
+ 1\b12\b2.\b.3\b33\b3.\b. k\bki\bil\bll\bl (\b(0\b0)\b)
k\bki\bil\bll\bl <\b<m\bms\bsg\bgn\bno\bo>\b> [\b[<\b<m\bms\bsg\bgn\bno\bo>\b> .\b..\b.]\b] Delete a message from the local system
the sysop).
- 1\b11\b1.\b.3\b34\b4.\b. k\bki\bil\bll\bl (\b(5\b5)\b)
+ 1\b12\b2.\b.3\b34\b4.\b. k\bki\bil\bll\bl (\b(5\b5)\b)
k\bki\bil\bll\bl <\b<m\bms\bsg\bgn\bno\bo>\b> [\b[<\b<m\bms\bsg\bgn\bno\bo>\b> .\b..\b..\b.]\b] Remove or erase a message from the system
k\bki\bil\bll\bl f\bfr\bro\bom\bm <\b<c\bca\bal\bll\bl>\b> Remove all messages from a callsign
As a sysop you can kill any message on the system.
- 1\b11\b1.\b.3\b35\b5.\b. k\bki\bil\bll\bl f\bfu\bul\bll\bl <\b<m\bms\bsg\bgn\bno\bo>\b> [\b[<\b<m\bms\bsg\bgn\bno\bo>\b>]\b] D\bDe\bel\ble\bet\bte\be a\ba m\bme\bes\bss\bsa\bag\bge\be f\bfr\bro\bom\bm t\bth\bhe\be w\bwh\bho\bol\ble\be
- c\bcl\blu\bus\bst\bte\ber\br k\bki\bil\bll\bl f\bfu\bul\bll\bl (\b(5\b5)\b)
+ 1\b12\b2.\b.3\b35\b5.\b. k\bki\bil\bll\bl f\bfu\bul\bll\bl (\b(5\b5)\b)
+
+ k\bki\bil\bll\bl f\bfu\bul\bll\bl <\b<m\bms\bsg\bgn\bno\bo>\b> [\b[<\b<m\bms\bsg\bgn\bno\bo>\b>]\b] Delete a message from the whole cluster
Delete a message (usually a 'bulletin') from the whole cluster system.
same subject will be deleted. Beware!
-
- 1\b11\b1.\b.3\b36\b6.\b. l\bli\bin\bnk\bks\bs (\b(0\b0)\b)
+ 1\b12\b2.\b.3\b36\b6.\b. l\bli\bin\bnk\bks\bs (\b(0\b0)\b)
l\bli\bin\bnk\bks\bs Show which nodes are physically connected
- 1\b11\b1.\b.3\b37\b7.\b. l\blo\boa\bad\bd/\b/a\bal\bli\bia\bas\bse\bes\bs (\b(9\b9)\b)
+ 1\b12\b2.\b.3\b37\b7.\b. l\blo\boa\bad\bd/\b/a\bal\bli\bia\bas\bse\bes\bs (\b(9\b9)\b)
l\blo\boa\bad\bd/\b/a\bal\bli\bia\bas\bse\bes\bs Reload the command alias table
- 1\b11\b1.\b.3\b38\b8.\b. l\blo\boa\bad\bd/\b/b\bba\bad\bdd\bdx\bx R\bRe\bel\blo\boa\bad\bd t\bth\bhe\be b\bba\bad\bd D\bDX\bX t\bta\bab\bbl\ble\be l\blo\boa\bad\bd/\b/b\bba\bad\bdd\bdx\bx (\b(9\b9)\b)
+ 1\b12\b2.\b.3\b38\b8.\b. l\blo\boa\bad\bd/\b/b\bba\bad\bdd\bdx\bx (\b(9\b9)\b)
+
+ l\blo\boa\bad\bd/\b/b\bba\bad\bdd\bdx\bx Reload the bad DX table
+
Reload the /spider/data/baddx.pl file if you have changed it manually
whilst the cluster is running. This table contains the DX Calls that,
if spotted, will not be passed on. FR0G and TEST are classic examples.
- 1\b11\b1.\b.3\b39\b9.\b. l\blo\boa\bad\bd/\b/b\bba\bad\bdm\bms\bsg\bg (\b(9\b9)\b)
+ 1\b12\b2.\b.3\b39\b9.\b. l\blo\boa\bad\bd/\b/b\bba\bad\bdm\bms\bsg\bg (\b(9\b9)\b)
l\blo\boa\bad\bd/\b/b\bba\bad\bdm\bms\bsg\bg Reload the bad message table
deleted on receipt.
- 1\b11\b1.\b.4\b40\b0.\b. l\blo\boa\bad\bd/\b/b\bba\bad\bdw\bwo\bor\brd\bds\bs (\b(9\b9)\b)
+ 1\b12\b2.\b.4\b40\b0.\b. l\blo\boa\bad\bd/\b/b\bba\bad\bdw\bwo\bor\brd\bds\bs (\b(9\b9)\b)
l\blo\boa\bad\bd/\b/b\bba\bad\bdw\bwo\bor\brd\bds\bs Reload the badwords file
ignored.
- 1\b11\b1.\b.4\b41\b1.\b. l\blo\boa\bad\bd/\b/b\bba\ban\bnd\bds\bs (\b(9\b9)\b)
- l\blo\boa\bad\bd/\b/b\bba\ban\bnd\bds\bs Reload the band limits table
- Reload the /spider/data/bands.pl file if you have changed it manually
- whilst the cluster is running.
+ 1\b12\b2.\b.4\b41\b1.\b. l\blo\boa\bad\bd/\b/b\bba\ban\bnd\bds\bs (\b(9\b9)\b)
+ l\blo\boa\bad\bd/\b/b\bba\ban\bnd\bds\bs Reload the band limits table
+ Reload the /spider/data/bands.pl file if you have changed it manually
+ whilst the cluster is running.
- 1\b11\b1.\b.4\b42\b2.\b. l\blo\boa\bad\bd/\b/c\bcm\bmd\bd_\b_c\bca\bac\bch\bhe\be (\b(9\b9)\b)
+ 1\b12\b2.\b.4\b42\b2.\b. l\blo\boa\bad\bd/\b/c\bcm\bmd\bd_\b_c\bca\bac\bch\bhe\be (\b(9\b9)\b)
l\blo\boa\bad\bd/\b/c\bcm\bmd\bd_\b_c\bca\bac\bch\bhe\be Reload the automatic command cache
was just after a cluster restart.
- 1\b11\b1.\b.4\b43\b3.\b. l\blo\boa\bad\bd/\b/f\bfo\bor\brw\bwa\bar\brd\bd (\b(9\b9)\b)
+ 1\b12\b2.\b.4\b43\b3.\b. l\blo\boa\bad\bd/\b/f\bfo\bor\brw\bwa\bar\brd\bd (\b(9\b9)\b)
l\blo\boa\bad\bd/\b/f\bfo\bor\brw\bwa\bar\brd\bd Reload the msg forwarding routing table
whilst the cluster is running.
- 1\b11\b1.\b.4\b44\b4.\b. l\blo\boa\bad\bd/\b/m\bme\bes\bss\bsa\bag\bge\bes\bs (\b(9\b9)\b)
+ 1\b12\b2.\b.4\b44\b4.\b. l\blo\boa\bad\bd/\b/m\bme\bes\bss\bsa\bag\bge\bes\bs (\b(9\b9)\b)
l\blo\boa\bad\bd/\b/m\bme\bes\bss\bsa\bag\bge\bes\bs Reload the system messages file
unknown message 'xxxx' in lang 'en'
- 1\b11\b1.\b.4\b45\b5.\b. l\blo\boa\bad\bd/\b/p\bpr\bre\bef\bfi\bix\bxe\bes\bs (\b(9\b9)\b)
+ 1\b12\b2.\b.4\b45\b5.\b. l\blo\boa\bad\bd/\b/p\bpr\bre\bef\bfi\bix\bxe\bes\bs (\b(9\b9)\b)
l\blo\boa\bad\bd/\b/p\bpr\bre\bef\bfi\bix\bxe\bes\bs Reload the prefix table
manually whilst the cluster is running.
- 1\b11\b1.\b.4\b46\b6.\b. m\bme\ber\brg\bge\be (\b(5\b5)\b)
+ 1\b12\b2.\b.4\b46\b6.\b. m\bme\ber\brg\bge\be (\b(5\b5)\b)
m\bme\ber\brg\bge\be <\b<n\bno\bod\bde\be>\b> [\b[<\b<n\bno\bo s\bsp\bpo\bot\bts\bs>\b>/\b/<\b<n\bno\bo w\bww\bwv\bv>\b>]\b] Ask for the latest spots and WWV
recently been added (the last 2 days for spots and last month for WWV
data).
-
- 1\b11\b1.\b.4\b47\b7.\b. m\bms\bsg\bg (\b(9\b9)\b)
+ 1\b12\b2.\b.4\b47\b7.\b. m\bms\bsg\bg (\b(9\b9)\b)
m\bms\bsg\bg <\b<c\bcm\bmd\bd>\b> <\b<m\bms\bsg\bgn\bno\bo>\b> [\b[d\bda\bat\bta\ba .\b..\b..\b.]\b] Alter various message parameters
Alter message parameters like To, From, Subject, whether private or
bulletin or return receipt (RR) is required or whether to keep this
message from timing out.
+
+
+
MSG TO <msgno> <call> - change TO callsign to <call>
MSG FRom <msgno> <call> - change FROM callsign to <call>
MSG PRrivate <msgno> - set private flag
This will display more information on the message than DIR does.
- 1\b11\b1.\b.4\b48\b8.\b. p\bpc\bc (\b(8\b8)\b)
+ 1\b12\b2.\b.4\b48\b8.\b. p\bpc\bc (\b(8\b8)\b)
p\bpc\bc <\b<c\bca\bal\bll\bl>\b> <\b<t\bte\bex\bxt\bt>\b> Send text (eg PC Protocol) to <call>
pc G1TLH Try doing that properly!!!
- 1\b11\b1.\b.4\b49\b9.\b. p\bpi\bin\bng\bg (\b(1\b1)\b)
+ 1\b12\b2.\b.4\b49\b9.\b. p\bpi\bin\bng\bg (\b(1\b1)\b)
p\bpi\bin\bng\bg <\b<n\bno\bod\bde\be>\b> Check the link quality between nodes
is output to the console in seconds. Any visible cluster node can be
PINGed.
-
-
- 1\b11\b1.\b.5\b50\b0.\b. r\brc\bcm\bmd\bd (\b(1\b1)\b)
+ 1\b12\b2.\b.5\b50\b0.\b. r\brc\bcm\bmd\bd (\b(1\b1)\b)
r\brc\bcm\bmd\bd <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> <\b<c\bcm\bmd\bd>\b> Send a command to another DX cluster
This command allows you to send nearly any command to another DX
Cluster node that is connected to the system.
-
Whether you get any output is dependant on a) whether the other system
knows that the node callsign of this cluster is in fact a node b)
whether the other system is allowing RCMDs from this node and c)
whether you have permission to send this command at all.
- 1\b11\b1.\b.5\b51\b1.\b. r\bre\bea\bad\bd (\b(0\b0)\b)
+ 1\b12\b2.\b.5\b51\b1.\b. r\bre\bea\bad\bd (\b(0\b0)\b)
r\bre\bea\bad\bd Read the next unread personal message addressed to you
r\bre\bea\bad\bd <\b<m\bms\bsg\bgn\bno\bo>\b> Read the specified message
- 1\b11\b1.\b.5\b52\b2.\b. r\bre\bea\bad\bd (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
+ 1\b12\b2.\b.5\b52\b2.\b. r\bre\bea\bad\bd (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
r\bre\bea\bad\bd <\b<m\bms\bsg\bgn\bno\bo>\b> Read a message on the system
As a sysop you may read any message on the system
- 1\b11\b1.\b.5\b53\b3.\b. r\bre\bej\bje\bec\bct\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be
+ 1\b12\b2.\b.5\b53\b3.\b. r\bre\bej\bje\bec\bct\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/a
\ban
\bnn
\bno
\bou
\bun
\bnc
\bce
\be [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Set a reject filter for announce
You can use any of the following things in this line:-
- info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
- wx 1 filter WX announces
- dest <prefixes> eg: 6MUK,WDX (distros)
+
+ info <string> eg: iota or qsl
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+ wx 1 filter WX announces
+ dest <prefixes> eg: 6MUK,WDX (distros)
+
+
some examples:-
- rej/ann by_zone 14,15,16 and not by G,M,2
+
+ rej/ann by_zone 14,15,16 and not by G,M,2
+
- rej/ann all
+ rej/ann all
+
but this probably for advanced users...
- 1\b11\b1.\b.5\b54\b4.\b. r\bre\bej\bje\bec\bct\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
+ 1\b12\b2.\b.5\b54\b4.\b. r\bre\bej\bje\bec\bct\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/a
\ban
\bnn
\bno
\bou
\bun
\bnc
\bce
\be <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Announce filter sysop
version
the default for nodes and users eg:-
- reject/ann by G,M,2
- reject/ann input node_default by G,M,2
- reject/ann user_default by G,M,2
+
+ reject/ann by G,M,2
+ reject/ann input node_default by G,M,2
+ reject/ann user_default by G,M,2
- 1\b11\b1.\b.5\b55\b5.\b. r\bre\bej\bje\bec\bct\bt/\b/s\bsp\bpo\bot\bts\bs (\b(0\b0)\b)
+
+ 1\b12\b2.\b.5\b55\b5.\b. r\bre\bej\bje\bec\bct\bt/\b/s\bsp\bpo\bot\bts\bs (\b(0\b0)\b)
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/s
\bsp
\bpo
\bot
\bts
\bs [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Set a reject filter line for spots
- Create an 'reject this spot' line for a filter.
+ Create a 'reject this spot' line for a filter.
- An reject filter line means that if the spot matches this filter it is
+ A reject filter line means that if the spot matches this filter it is
dumped (not passed on). See HELP FILTERS for more info. Please read
this to understand how filters work - it will save a lot of grief
later on.
You can use any of the following things in this line:-
+
+
+
+
+
+
+
+
+
+
+
freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
on <range> same as 'freq'
call <prefixes> eg: G,PA,HB9
+
For frequencies, you can use any of the band names defined in
SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
thus: hf/ssb. You can also just have a simple range like: 0/30000 -
+ rej/spot 1 on hf
+ rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
- rej/spot 1 on hf
- rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
You can use the tag 'all' to reject everything eg:
- rej/spot 3 all
+
+ rej/spot 3 all
+
but this probably for advanced users...
- 1\b11\b1.\b.5\b56\b6.\b. r\bre\bej\bje\bec\bct\bt/\b/s\bsp\bpo\bot\bts\bs (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
+ 1\b12\b2.\b.5\b56\b6.\b. r\bre\bej\bje\bec\bct\bt/\b/s\bsp\bpo\bot\bts\bs (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/s
\bsp
\bpo
\bot
\bts
\bs <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Reject spot filter sysop
version
the default for nodes and users eg:-
- reject/spot db0sue-7 1 by_zone 14,15,16
- reject/spot node_default all
- set/hops node_default 10
- reject/spot user_default by G,M,2
+ reject/spot db0sue-7 1 by_zone 14,15,16
+ reject/spot node_default all
+ set/hops node_default 10
+ reject/spot user_default by G,M,2
- 1\b11\b1.\b.5\b57\b7.\b. r\bre\bej\bje\bec\bct\bt/\b/w\bwc\bcy\by (\b(0\b0)\b)
+
+
+ 1\b12\b2.\b.5\b57\b7.\b. r\bre\bej\bje\bec\bct\bt/\b/w\bwc\bcy\by (\b(0\b0)\b)
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/w
\bwc
\bcy
\by [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Set a reject WCY filter
can filter on the following fields:-
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
See HELP FILTER for information.
-
-
- 1\b11\b1.\b.5\b58\b8.\b. r\bre\bej\bje\bec\bct\bt/\b/w\bwc\bcy\by (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
+ 1\b12\b2.\b.5\b58\b8.\b. r\bre\bej\bje\bec\bct\bt/\b/w\bwc\bcy\by (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/w
\bwc
\bcy
\by <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> WCY reject filter sysop
version
reject/wcy gb7djk all
- 1\b11\b1.\b.5\b59\b9.\b. r\bre\bej\bje\bec\bct\bt/\b/w\bww\bwv\bv (\b(0\b0)\b)
+ 1\b12\b2.\b.5\b59\b9.\b. r\bre\bej\bje\bec\bct\bt/\b/w\bww\bwv\bv (\b(0\b0)\b)
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/w
\bww
\bwv
\bv [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> Set a reject WWV filter
can filter on the following fields:-
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
for example
- reject/wwv by_zone 14,15,16
+
+ reject/wwv by_zone 14,15,16
+
See HELP FILTER for information.
- 1\b11\b1.\b.6\b60\b0.\b. r\bre\bej\bje\bec\bct\bt/\b/w\bww\bwv\bv (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
+ 1\b12\b2.\b.6\b60\b0.\b. r\bre\bej\bje\bec\bct\bt/\b/w\bww\bwv\bv (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(8\b8)\b)
r
\bre
\bej
\bje
\bec
\bct
\bt/
\b/w
\bww
\bwv
\bv <
\b<c
\bca
\bal
\bll
\bl>
\b> [
\b[i
\bin
\bnp
\bpu
\but
\bt]
\b] [
\b[0
\b0-
\b-9
\b9]
\b] <
\b<p
\bpa
\bat
\btt
\bte
\ber
\brn
\bn>
\b> WWV reject filter sysop
version
the default for nodes and users eg:-
- reject/wwv db0sue-7 1 by_zone 4
- reject/wwv node_default all
- reject/wwv user_default by W
+ reject/wwv db0sue-7 1 by_zone 4
+ reject/wwv node_default all
+ reject/wwv user_default by W
- 1\b11\b1.\b.6\b61\b1.\b. r\bre\bep\bpl\bly\by (\b(0\b0)\b)
+ 1\b12\b2.\b.6\b61\b1.\b. r\bre\bep\bpl\bly\by (\b(0\b0)\b)
r\bre\bep\bpl\bly\by Reply (privately) to the last message that you have read
r\bre\bep\bpl\bly\by <\b<m\bms\bsg\bgn\bno\bo>\b> Reply (privately) to the specified message
further details)
- 1\b11\b1.\b.6\b62\b2.\b. s\bse\ben\bnd\bd (\b(0\b0)\b)
+ 1\b12\b2.\b.6\b62\b2.\b. s\bse\ben\bnd\bd (\b(0\b0)\b)
s\bse\ben\bnd\bd <\b<c\bca\bal\bll\bl>\b> [\b[<\b<c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Send a message to one or more callsigns
s\bse\ben\bnd\bd R\bRR\bR <\b<c\bca\bal\bll\bl>\b> Send a message and ask for a read receipt
You can have multiple qualifiers so that you can have for example:-
- SEND RR COPY 123 PRIVATE G1TLH G0RDI
+
+ SEND RR COPY 123 PRIVATE G1TLH G0RDI
+
is an alias for SEND PRIVATE
- 1\b11\b1.\b.6\b63\b3.\b. s\bse\bet\bt/\b/a\bad\bdd\bdr\bre\bes\bss\bs (\b(0\b0)\b)
+ 1\b12\b2.\b.6\b63\b3.\b. s\bse\bet\bt/\b/a\bad\bdd\bdr\bre\bes\bss\bs (\b(0\b0)\b)
s\bse\bet\bt/\b/a\bad\bdd\bdr\bre\bes\bss\bs <\b<y\byo\bou\bur\br_\b_a\bad\bdd\bdr\bre\bes\bss\bs>\b> Record your postal address
Literally, record your address details on the cluster.
- 1\b11\b1.\b.6\b64\b4.\b. s\bse\bet\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(0\b0)\b)
+ 1\b12\b2.\b.6\b64\b4.\b. s\bse\bet\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be (\b(0\b0)\b)
s\bse\bet\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be Allow announce messages
Allow announce messages to arrive at your terminal.
-
- 1\b11\b1.\b.6\b65\b5.\b. s\bse\bet\bt/\b/a\bar\brc\bcl\blu\bus\bst\bte\ber\br (\b(5\b5)\b)
+ 1\b12\b2.\b.6\b65\b5.\b. s\bse\bet\bt/\b/a\bar\brc\bcl\blu\bus\bst\bte\ber\br (\b(5\b5)\b)
s\bse\bet\bt/\b/a\bar\brc\bcl\blu\bus\bst\bte\ber\br <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the node_call an AR-
Cluster type node
Set the node_call as an AR-Cluster type node
- 1\b11\b1.\b.6\b66\b6.\b. s\bse\bet\bt/\b/b\bba\bad\bdn\bno\bod\bde\be (\b(6\b6)\b)
+ 1\b12\b2.\b.6\b66\b6.\b. s\bse\bet\bt/\b/b\bba\bad\bdd\bdx\bx (\b(8\b8)\b)
+
+ s\bse\bet\bt/\b/b\bba\bad\bdd\bdx\bx <\b<c\bca\bal\bll\bl>\b> Stop words we do not wish to see in the callsign
+ field of a dx spot being propagated
+
+
+ Setting a word as 'baddx' will prevent spots with that word in the
+ callsign field of a DX spot from going any further. They will not be
+ displayed and they will not be sent onto other nodes.
+
+ The word must be wriiten in full, no wild cards are allowed eg:-
+
+
+
+ set/baddx FORSALE VIDEO FR0G
+
+
+
+
+ To allow a word again, use the following command ...
+
+ unset/baddx VIDEO
+
+
+
+
+
+ 1\b12\b2.\b.6\b67\b7.\b. s\bse\bet\bt/\b/b\bba\bad\bdn\bno\bod\bde\be (\b(6\b6)\b)
s\bse\bet\bt/\b/b\bba\bad\bdn\bno\bod\bde\be <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> Stop spots from this node_call being
propagated
The call can be a full or partial call (or a prefix), eg:-
- set/badnode K1TTT
+
+ set/badnode K1TTT
+
will stop anything from K1TTT (including any SSID's)
- unset/badnode K1TTT
+ unset/badnode K1TTT
+
+
+
+
+ will allow spots from him again.
+
+ Use with extreme care. This command may well be superceded by
+ FILTERing.
+
+
+ 1\b12\b2.\b.6\b68\b8.\b. s\bse\bet\bt/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\br (\b(8\b8)\b)
+
+ s\bse\bet\bt/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\br <\b<c\bca\bal\bll\bl>\b> Stop spots from this callsign being propagated
+
+
+ Setting a callsign as a 'badspotter' will prevent spots from this
+ callsign going any further. They will not be displayed and they will
+ not be sent onto other nodes.
+
+ The call must be written in full, no wild cards are allowed eg:-
+
+
+
+ set/badspotter VE2STN
+
+
+
+
+ will stop anything from VE2STN. If you want SSIDs as well then you
+ must enter them specifically.
+
+
+
+ unset/badspotter VE2STN
will allow spots from him again.
FILTERing.
- 1\b11\b1.\b.6\b67\b7.\b. s\bse\bet\bt/\b/b\bbe\bee\bep\bp (\b(0\b0)\b)
+ 1\b12\b2.\b.6\b69\b9.\b. s\bse\bet\bt/\b/b\bbe\bee\bep\bp (\b(0\b0)\b)
s\bse\bet\bt/\b/b\bbe\bee\bep\bp Add beeps to terminal messages
Add a beep to DX and other terminal messages.
- 1\b11\b1.\b.6\b68\b8.\b. s\bse\bet\bt/\b/c\bcl\blx\bx (\b(5\b5)\b)
+ 1\b12\b2.\b.7\b70\b0.\b. s\bse\bet\bt/\b/c\bcl\blx\bx (\b(5\b5)\b)
s\bse\bet\bt/\b/c\bcl\blx\bx <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the node_call a CLX type
node
Set the node_call as a CLX type node
- 1\b11\b1.\b.6\b69\b9.\b. s\bse\bet\bt/\b/d\bde\beb\bbu\bug\bg (\b(9\b9)\b)
+ 1\b12\b2.\b.7\b71\b1.\b. s\bse\bet\bt/\b/d\bde\beb\bbu\bug\bg (\b(9\b9)\b)
s\bse\bet\bt/\b/d\bde\beb\bbu\bug\bg <\b<n\bna\bam\bme\be>\b> Add a debug level to the debug set
You can remove this level with unset/debug <name>
-
-
- 1\b11\b1.\b.7\b70\b0.\b. s\bse\bet\bt/\b/d\bdx\bx (\b(0\b0)\b)
+ 1\b12\b2.\b.7\b72\b2.\b. s\bse\bet\bt/\b/d\bdx\bx (\b(0\b0)\b)
s\bse\bet\bt/\b/d\bdx\bxAllow DX messages to arrive at your terminal
You can stop DX messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bd_\bx command
- 1\b11\b1.\b.7\b71\b1.\b. s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd (\b(0\b0)\b)
+ 1\b12\b2.\b.7\b73\b3.\b. s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd (\b(0\b0)\b)
s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bdAllow grid squares on the end of DX messages
to remove the grid squares.
- 1\b11\b1.\b.7\b72\b2.\b. s\bse\bet\bt/\b/d\bdx\bxn\bne\bet\bt (\b(5\b5)\b)
+ 1\b12\b2.\b.7\b74\b4.\b. s\bse\bet\bt/\b/d\bdx\bxn\bne\bet\bt (\b(5\b5)\b)
s\bse\bet\bt/\b/d\bdx\bxn\bne\bet\bt <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the node_call a DXNet
type node
Set the node_call as a DXNet type node
- 1\b11\b1.\b.7\b73\b3.\b. s\bse\bet\bt/\b/e\bec\bch\bho\bo (\b(0\b0)\b)
+ 1\b12\b2.\b.7\b75\b5.\b. s\bse\bet\bt/\b/e\bec\bch\bho\bo (\b(0\b0)\b)
s\bse\bet\bt/\b/e\bec\bch\bho\bo Make the cluster echo your input
YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
- 1\b11\b1.\b.7\b74\b4.\b. s\bse\bet\bt/\b/h\bhe\ber\bre\be (\b(0\b0)\b)
+ 1\b12\b2.\b.7\b76\b6.\b. s\bse\bet\bt/\b/h\bhe\ber\bre\be (\b(0\b0)\b)
s\bse\bet\bt/\b/h\bhe\ber\bre\be Set the here flag
brackets around your callsign to indicate you are not available.
- 1\b11\b1.\b.7\b75\b5.\b. s\bse\bet\bt/\b/h\bho\bom\bme\ben\bno\bod\bde\be (\b(0\b0)\b)
+ 1\b12\b2.\b.7\b77\b7.\b. s\bse\bet\bt/\b/h\bho\bom\bme\ben\bno\bod\bde\be (\b(0\b0)\b)
s\bse\bet\bt/\b/h\bho\bom\bme\ben\bno\bod\bde\be <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> Set your home cluster
- SET/HOMENODE gb7djk
+ SET/HOMENODE gb7djk
+
- 1\b11\b1.\b.7\b76\b6.\b. s\bse\bet\bt/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
+ 1\b12\b2.\b.7\b78\b8.\b. s\bse\bet\bt/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
s\bse\bet\bt/\b/h\bho\bop\bps\bs <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> a\ban\bnn\bn|\b|s\bsp\bpo\bot\bts\bs|\b|w\bww\bwv\bv|\b|w\bwc\bcy\by <\b<n\bn>\b> Set hop count
currently: announce, spots, wwv and wcy broadcasts.
- eg:
- set/hops gb7djk ann 10
- set/hops gb7mbc spots 20
+
+ eg:
+ set/hops gb7djk ann 10
+ set/hops gb7mbc spots 20
+
creates a filter and works in conjunction with the filter system.
- 1\b11\b1.\b.7\b77\b7.\b. s\bse\bet\bt/\b/i\bis\bso\bol\bla\bat\bte\be (\b(9\b9)\b)
+ 1\b12\b2.\b.7\b79\b9.\b. s\bse\bet\bt/\b/i\bis\bso\bol\bla\bat\bte\be (\b(9\b9)\b)
s\bse\bet\bt/\b/i\bis\bso\bol\bla\bat\bte\be <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> Isolate a node from the rest of the network
+
Connect a node to your system in such a way that you are a full
protocol member of its network and can see all spots on it, but
nothing either leaks out from it nor goes back into from the rest of
You can remove the isolation with the command unset/isolate.
- 1\b11\b1.\b.7\b78\b8.\b. s\bse\bet\bt/\b/l\bla\ban\bng\bgu\bua\bag\bge\be (\b(0\b0)\b)
+ 1\b12\b2.\b.8\b80\b0.\b. s\bse\bet\bt/\b/l\bla\ban\bng\bgu\bua\bag\bge\be (\b(0\b0)\b)
s\bse\bet\bt/\b/l\bla\ban\bng\bgu\bua\bag\bge\be <\b<l\bla\ban\bng\bgu\bua\bag\bge\be>\b> Set the language you wish to use
Currently the languages available are _\be_\bn (English) and _\bn_\bl (Dutch).
- 1\b11\b1.\b.7\b79\b9.\b. s\bse\bet\bt/\b/l\blo\boc\bca\bat\bti\bio\bon\bn (\b(0\b0)\b)
+ 1\b12\b2.\b.8\b81\b1.\b. s\bse\bet\bt/\b/l\blo\boc\bca\bat\bti\bio\bon\bn (\b(0\b0)\b)
s\bse\bet\bt/\b/l\blo\boc\bca\bat\bti\bio\bon\bn <\b<l\bla\bat\bt a\ban\bnd\bd l\blo\bon\bng\bg>\b> Set your latitude and longitude
the _\bs_\be_\bt_\b/_\bq_\br_\ba command which will do the conversion for you.
- set/location 54 04 N 2 02 E
+
+ set/location 54 04 N 2 02 E
- 1\b11\b1.\b.8\b80\b0.\b. s\bse\bet\bt/\b/s\bsy\bys\bs_\b_l\blo\boc\bca\bat\bti\bio\bon\bn (\b(9\b9)\b)
+
+
+
+ 1\b12\b2.\b.8\b82\b2.\b. s\bse\bet\bt/\b/s\bsy\bys\bs_\b_l\blo\boc\bca\bat\bti\bio\bon\bn (\b(9\b9)\b)
s\bse\bet\bt/\b/s\bsy\bys\bs_\b_l\blo\boc\bca\bat\bti\bio\bon\bn <\b<l\bla\bat\bt &\b& l\blo\bon\bng\bg>\b> Set your cluster latitude and longitude
example:-
- SET/LOCATION 52 22 N 0 57 E
+
+ SET/LOCATION 52 22 N 0 57 E
- 1\b11\b1.\b.8\b81\b1.\b. s\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo (\b(0\b0)\b)
+
+ 1\b12\b2.\b.8\b83\b3.\b. s\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo (\b(0\b0)\b)
s\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo Show logins and logouts of nodes and users
You can stop these messages by using the _\bu_\bn_\bs_\be_\bt_\b/_\bl_\bo_\bg_\bi_\bn_\bi_\bn_\bf_\bo command.
-
- 1\b11\b1.\b.8\b82\b2.\b. s\bse\bet\bt/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
+ 1\b12\b2.\b.8\b84\b4.\b. s\bse\bet\bt/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
s\bse\bet\bt/\b/l\blo\boc\bck\bko\bou\but\bt <\b<c\bca\bal\bll\bl>\b> Stop a callsign connecting to the cluster
allow the user to connect again, use the _\bu_\bn_\bs_\be_\bt_\b/_\bl_\bo_\bc_\bk_\bo_\bu_\bt command.
- 1\b11\b1.\b.8\b83\b3.\b. s\bse\bet\bt/\b/n\bna\bam\bme\be (\b(0\b0)\b)
+ 1\b12\b2.\b.8\b85\b5.\b. s\bse\bet\bt/\b/n\bna\bam\bme\be (\b(0\b0)\b)
s\bse\bet\bt/\b/n\bna\bam\bme\be <\b<y\byo\bou\bur\br_\b_n\bna\bam\bme\be>\b> Set your name
Tell the cluster what your name is, eg:-
- set/name Dirk
+
+ set/name Dirk
+
- 1\b11\b1.\b.8\b84\b4.\b. s\bse\bet\bt/\b/n\bno\bod\bde\be (\b(9\b9)\b)
+ 1\b12\b2.\b.8\b86\b6.\b. s\bse\bet\bt/\b/n\bno\bod\bde\be (\b(9\b9)\b)
s\bse\bet\bt/\b/n\bno\bod\bde\be <\b<c\bca\bal\bll\bl>\b> [\b[<\b<c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the callsign an AK1A cluster
From version 1.41 you can also set the following types of cluster
- set/spider
- set/dxnet
- set/clx
- set/arcluster
+
+ set/spider
+ set/dxnet
+ set/clx
+ set/arcluster
+
To see what your nodes are set to, use the _\bs_\bh_\bo_\bw_\b/_\bn_\bo_\bd_\be_\bs command.
- 1\b11\b1.\b.8\b85\b5.\b. s\bse\bet\bt/\b/o\bob\bbs\bsc\bco\bou\bun\bnt\bt (\b(9\b9)\b)
+ 1\b12\b2.\b.8\b87\b7.\b. s\bse\bet\bt/\b/o\bob\bbs\bsc\bco\bou\bun\bnt\bt (\b(9\b9)\b)
s\bse\bet\bt/\b/o\bob\bbs\bsc\bco\bou\bun\bnt\bt <\b<c\bco\bou\bun\bnt\bt>\b> <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> Set the 'pump-up' obsolescence
counter
If a ping is heard then the obscount is reset to the full value. Using
default values, if a node has not responded to a ping within 15
minutes, it is disconnected.
-
-
- 1\b11\b1.\b.8\b86\b6.\b. s\bse\bet\bt/\b/p\bpa\bag\bge\be (\b(0\b0)\b)
+ 1\b12\b2.\b.8\b88\b8.\b. s\bse\bet\bt/\b/p\bpa\bag\bge\be (\b(0\b0)\b)
s\bse\bet\bt/\b/p\bpa\bag\bge\be <\b<n\bn>\b> Set the number of lines per page
Setting it explicitly to 0 will disable paging.
- SET/PAGE 30
- SET/PAGE 0
+
+ SET/PAGE 30
+ SET/PAGE 0
+
- 1\b11\b1.\b.8\b87\b7.\b. s\bse\bet\bt/\b/p\bpa\bas\bss\bsw\bwo\bor\brd\bd (\b(9\b9)\b)
+ 1\b12\b2.\b.8\b89\b9.\b. s\bse\bet\bt/\b/p\bpa\bas\bss\bsw\bwo\bor\brd\bd (\b(9\b9)\b)
s\bse\bet\bt/\b/p\bpa\bas\bss\bsw\bwo\bor\brd\bd <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> <\b<s\bst\btr\bri\bin\bng\bg>\b> Set a users password
type password.
- 1\b11\b1.\b.8\b88\b8.\b. s\bse\bet\bt/\b/p\bpi\bin\bng\bgi\bin\bnt\bte\ber\brv\bva\bal\bl (\b(9\b9)\b)
+ 1\b12\b2.\b.9\b90\b0.\b. s\bse\bet\bt/\b/p\bpi\bin\bng\bgi\bin\bnt\bte\ber\brv\bva\bal\bl (\b(9\b9)\b)
s\bse\bet\bt/\b/p\bpi\bin\bng\bgi\bin\bnt\bte\ber\brv\bva\bal\bl <\b<t\bti\bim\bme\be>\b> <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> Set the ping time to neighbouring
nodes
for more information.
- 1\b11\b1.\b.8\b89\b9.\b. s\bse\bet\bt/\b/p\bpr\bri\biv\bvi\bil\ble\beg\bge\be (\b(9\b9)\b)
+ 1\b12\b2.\b.9\b91\b1.\b. s\bse\bet\bt/\b/p\bpr\bri\biv\bvi\bil\ble\beg\bge\be (\b(9\b9)\b)
s\bse\bet\bt/\b/p\bpr\bri\biv\bvi\bil\ble\beg\bge\be <\b<n\bn>\b> <\b<c\bca\bal\bll\bl>\b> [\b[<\b<c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Set the privilege level on a
call
- 0 - normal user
- 1 - allow remote nodes normal user RCMDs
- 5 - various privileged commands (including shutdown, but not disc-
- connect), the normal level for another node.
- 8 - more privileged commands (including disconnect)
- 9 - local sysop privilege. DO NOT SET ANY REMOTE USER OR NODE TO THIS
- LEVEL.
+
+ 0 - normal user
+ 1 - allow remote nodes normal user RCMDs
+ 5 - various privileged commands (including shutdown, but not disc-
+ connect), the normal level for another node.
+ 8 - more privileged commands (including disconnect)
+ 9 - local sysop privilege. DO NOT SET ANY REMOTE USER OR NODE TO THIS
+ LEVEL.
connection your privilege will automatically be set to 0.
- 1\b11\b1.\b.9\b90\b0.\b. s\bse\bet\bt/\b/s\bsp\bpi\bid\bde\ber\br (\b(5\b5)\b)
+ 1\b12\b2.\b.9\b92\b2.\b. s\bse\bet\bt/\b/s\bsp\bpi\bid\bde\ber\br (\b(5\b5)\b)
s\bse\bet\bt/\b/s\bsp\bpi\bid\bde\ber\br <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the node_call a DXSpider
type node
Set the node_call as a DXSpider type node
- 1\b11\b1.\b.9\b91\b1.\b. s\bse\bet\bt/\b/s\bsy\bys\bs_\b_q\bqr\bra\ba (\b(9\b9)\b)
+ 1\b12\b2.\b.9\b93\b3.\b. s\bse\bet\bt/\b/s\bsy\bys\bs_\b_q\bqr\bra\ba (\b(9\b9)\b)
s\bse\bet\bt/\b/s\bsy\bys\bs_\b_q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> Set your cluster QRA locator
- 1\b11\b1.\b.9\b92\b2.\b. s\bse\bet\bt/\b/q\bqr\bra\ba (\b(0\b0)\b)
+ 1\b12\b2.\b.9\b94\b4.\b. s\bse\bet\bt/\b/q\bqr\bra\ba (\b(0\b0)\b)
s\bse\bet\bt/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> Set your QRA locator
roughly correctly (assuming your locator is correct ;-). For example:-
- SET/QRA JO02LQ
+
+ SET/QRA JO02LQ
- 1\b11\b1.\b.9\b93\b3.\b. s\bse\bet\bt/\b/q\bqt\bth\bh (\b(0\b0)\b)
+ 1\b12\b2.\b.9\b95\b5.\b. s\bse\bet\bt/\b/q\bqt\bth\bh (\b(0\b0)\b)
s\bse\bet\bt/\b/q\bqt\bth\bh <\b<y\byo\bou\bur\br Q\bQT\bTH\bH>\b> Set your QTH
Tell the system where your are. For example:-
- set/qth East Dereham, Norfolk
+ set/qth East Dereham, Norfolk
- 1\b11\b1.\b.9\b94\b4.\b. s\bse\bet\bt/\b/t\bta\bal\blk\bk (\b(0\b0)\b)
+
+
+ 1\b12\b2.\b.9\b96\b6.\b. s\bse\bet\bt/\b/t\bta\bal\blk\bk (\b(0\b0)\b)
s\bse\bet\bt/\b/t\bta\bal\blk\bk Allow talk messages to be seen at your console
talks with the _\bu_\bn_\bs_\be_\bt_\b/_\bt_\ba_\bl_\bk command.
- 1\b11\b1.\b.9\b95\b5.\b. s\bse\bet\bt/\b/w\bwc\bcy\by (\b(0\b0)\b)
+ 1\b12\b2.\b.9\b97\b7.\b. s\bse\bet\bt/\b/w\bwc\bcy\by (\b(0\b0)\b)
s\bse\bet\bt/\b/w\bwc\bcy\by Allow WCY messages to be seen at your console
WCY messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bw_\bc_\by command.
- 1\b11\b1.\b.9\b96\b6.\b. s\bse\bet\bt/\b/w\bww\bwv\bv (\b(0\b0)\b)
+ 1\b12\b2.\b.9\b98\b8.\b. s\bse\bet\bt/\b/w\bww\bwv\bv (\b(0\b0)\b)
s\bse\bet\bt/\b/w\bww\bwv\bv Allow WWV messages to be seen at your console
WWV messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bw_\bw_\bv command.
- 1\b11\b1.\b.9\b97\b7.\b. s\bse\bet\bt/\b/w\bwx\bx (\b(0\b0)\b)
+ 1\b12\b2.\b.9\b99\b9.\b. s\bse\bet\bt/\b/w\bwx\bx (\b(0\b0)\b)
s\bse\bet\bt/\b/w\bwx\bx Allow WX messages to be seen at your console
WX messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bw_\bx command.
- 1\b11\b1.\b.9\b98\b8.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bdn\bno\bod\bde\be (\b(6\b6)\b)
+ 1\b12\b2.\b.1\b10\b00\b0.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bdd\bdx\bx (\b(1\b1)\b)
+
+ s\bsh\bho\bow\bw/\b/b\bba\bad\bdd\bdx\bxShow all the bad dx calls in the system
+
+
+ Display all the bad dx callsigns in the system, see SET/BADDX for more
+ information.
+
+
+ 1\b12\b2.\b.1\b10\b01\b1.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bdn\bno\bod\bde\be (\b(6\b6)\b)
s\bsh\bho\bow\bw/\b/b\bba\bad\bdn\bno\bod\bde\be Show all the bad nodes in the system
more information.
- 1\b11\b1.\b.9\b99\b9.\b. s\bsh\bho\bow\bw/\b/d\bda\bat\bte\be (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b10\b02\b2.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\br (\b(1\b1)\b)
+
+ s\bsh\bho\bow\bw/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\brShow all the bad spotters in the system
+
+
+ Display all the bad spotter's callsigns in the system, see
+ SET/BADSPOTTER for more information.
+
+
+ 1\b12\b2.\b.1\b10\b03\b3.\b. s\bsh\bho\bow\bw/\b/d\bda\bat\bte\be (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/d
\bda
\bat
\bte
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show the local time
including DST) at the prefixes or callsigns that you specify.
- 1\b11\b1.\b.1\b10\b00\b0.\b. s\bsh\bho\bow\bw/\b/d\bdx\bx (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b10\b04\b4.\b. s\bsh\bho\bow\bw/\b/d\bdx\bx (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/d\bdx\bx [\b[o\bop\bpt\bti\bio\bon\bns\bs]\b] interrogate the spot database
- on <band> - eg 160m 20m 2m 23cm 6mm
- on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
- <number> - the number of spots you want
- <from>-<to> - <from> spot no <to> spot no in
- the selected list
+ on <band> - eg 160m 20m 2m 23cm 6mm
+ on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
- <prefix> - for a spotted callsign beginning with <prefix>
- *<suffix> - for a spotted callsign ending in <suffix>
- *<string>* - for a spotted callsign containing <string>
+ <number> - the number of spots you want
+ <from>-<to> - <from> spot no <to> spot no in
+ the selected list
- day <number> - starting <number> days ago
- day <from>-<to> - <from> days <to> days ago
+ <prefix> - for a spotted callsign beginning with <prefix>
+ *<suffix> - for a spotted callsign ending in <suffix>
+ *<string>* - for a spotted callsign containing <string>
- info <text> - any spots containing <text> in the info or remarks
+ day <number> - starting <number> days ago
+ day <from>-<to> - <from> days <to> days ago
- by <call> - any spots spotted by <call> (spotter <call>
- is the same).
+ info <text> - any spots containing <text> in the info or remarks
- qsl - this automatically looks for any qsl info on the call
- held in the spot database.
+ by <call> - any spots spotted by <call> (spotter <call>
+ is the same).
- iota [<iota>] - If the iota island number is missing it will
- look for the string iota and anything which looks like
- an iota island number. If you specify then it will look
- for that island.
+ qsl - this automatically looks for any qsl info on the call
+ held in the spot database.
- qra [<locator>] - this will look for the specific locator if
- you specify one or else anything that looks like a locator.
+ iota [<iota>] - If the iota island number is missing it will
+ look for the string iota and anything which looks like
+ an iota island number. If you specify then it will look
+ for that island.
+ qra [<locator>] - this will look for the specific locator if
+ you specify one or else anything that looks like a locator.
- e.g.
+ e.g.
- SH/DX 9m0
- SH/DX on 20m info iota
- SH/DX 9a on vhf day 30
- SH/DX rf1p qsl
- SH/DX iota
- SH/DX iota eu-064
- SH/DX qra jn86
+ SH/DX 9m0
+ SH/DX on 20m info iota
+ SH/DX 9a on vhf day 30
+ SH/DX rf1p qsl
+ SH/DX iota
+ SH/DX iota eu-064
+ SH/DX qra jn86
- 1\b11\b1.\b.1\b10\b01\b1.\b. s\bsh\bho\bow\bw/\b/d\bdx\bxc\bcc\bc (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b10\b05\b5.\b. s\bsh\bho\bow\bw/\b/d\bdx\bxc\bcc\bc (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/d
\bdx
\bxc
\bcc
\bc <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> Interrogate the spot database by country
- SH/DXCC G
- SH/DXCC W on 20m info iota
+
+ SH/DXCC G
+ SH/DXCC W on 20m info iota
+
- 1\b11\b1.\b.1\b10\b02\b2.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b10\b06\b6.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs [\b[<\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b> [\b[<\b<s\bst\btr\bri\bin\bng\bg>\b>]\b]]\b] List the contents of a filearea
type:-
- SH/FILES <filearea>
+
+ SH/FILES <filearea>
+
string to see a selection of files in a filearea eg:-
- SH/FILES bulletins arld*
+
+ SH/FILES bulletins arld*
+
See also TYPE - to see the contents of a file.
- 1\b11\b1.\b.1\b10\b03\b3.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b10\b07\b7.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br Show the filters you have set
displays all the filters set - for all the various categories.
- 1\b11\b1.\b.1\b10\b04\b4.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b10\b08\b8.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the filters set by <callsign>
-
A sysop can look at any filters that have been set.
-
-
- 1\b11\b1.\b.1\b10\b05\b5.\b. s\bsh\bho\bow\bw/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
+ 1\b12\b2.\b.1\b10\b09\b9.\b. s\bsh\bho\bow\bw/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
s\bsh\bho\bow\bw/\b/h\bho\bop\bps\bs <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[a\ban\bnn\bn|\b|s\bsp\bpo\bot\bts\bs|\b|w\bwc\bcy\by|\b|w\bww\bwv\bv|\b|]\b] Show the hop counts for a
node
the categories will be listed.
- 1\b11\b1.\b.1\b10\b06\b6.\b. s\bsh\bho\bow\bw/\b/i\bis\bso\bol\bla\bat\bte\be (\b(1\b1)\b)
+ 1\b12\b2.\b.1\b11\b10\b0.\b. s\bsh\bho\bow\bw/\b/i\bis\bso\bol\bla\bat\bte\be (\b(1\b1)\b)
s\bsh\bho\bow\bw/\b/i\bis\bso\bol\bla\bat\bte\be Show a list of isolated nodes
Show which nodes are currently set to be isolated.
- 1\b11\b1.\b.1\b10\b07\b7.\b. s\bsh\bho\bow\bw/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
+ 1\b12\b2.\b.1\b11\b11\b1.\b. s\bsh\bho\bow\bw/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
s\bsh\bho\bow\bw/\b/l\blo\boc\bck\bko\bou\but\bt Show a list of excluded callsigns
cluster locally with the _\bs_\be_\bt_\b/_\bl_\bo_\bc_\bk_\bo_\bu_\bt command
- 1\b11\b1.\b.1\b10\b08\b8.\b. s\bsh\bho\bow\bw/\b/m\bmo\boo\bon\bn (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b11\b12\b2.\b. s\bsh\bho\bow\bw/\b/m\bmo\boo\bon\bn (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/m
\bmo
\boo
\bon
\bn [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show moon rise and set times
For example:-
- SH/MOON
- SH/MOON G1TLH W5UN
+
+ SH/MOON
+ SH/MOON G1TLH W5UN
- 1\b11\b1.\b.1\b10\b09\b9.\b. s\bsh\bho\bow\bw/\b/m\bmu\buf\bf (\b(0\b0)\b)
+
+ 1\b12\b2.\b.1\b11\b13\b3.\b. s\bsh\bho\bow\bw/\b/m\bmu\buf\bf (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/m
\bmu
\buf
\bf <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> [
\b[<
\b<h
\bho
\bou
\bur
\brs
\bs>
\b>]
\b][
\b[l
\blo
\bon
\bng
\bg]
\b] Show the likely propagation to
<prefix>
-
This command allow you to estimate the likelihood of you contacting a
station with the prefix you have specified. The output assumes a
modest power of 20dBW and receiver sensitivity of -123dBm (about
0.15muV/10dB SINAD)
+
The result predicts the most likely operating frequencies and signal
levels for high frequency (shortwave) radio propagation paths on
specified days of the year and hours of the day. It is most useful for
of hours required after the prefix. For example:-
- SH/MUF W
+
+ SH/MUF W
+
produces:
- RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
- Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
- Location Lat / Long Azim
- East Dereham, Norfolk 52 41 N 0 57 E 47
- United-States-W 43 0 N 87 54 W 299
- UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
- 18 23 11.5 -35 mS0+ mS2 S3
- 19 0 11.2 -41 mS0+ mS2 S3
+
+ RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
+ Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
+ Location Lat / Long Azim
+ East Dereham, Norfolk 52 41 N 0 57 E 47
+ United-States-W 43 0 N 87 54 W 299
+ UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
+ 18 23 11.5 -35 mS0+ mS2 S3
+ 19 0 11.2 -41 mS0+ mS2 S3
+
inputing:-
- SH/MUF W 24
+ SH/MUF W 24
+
- SH/MUF W L 24
- SH/MUF W 24 Long
+ SH/MUF W L 24
+ SH/MUF W 24 Long
+
terrible accurate, but it is included for completeness.
- 1\b11\b1.\b.1\b11\b10\b0.\b. s\bsh\bho\bow\bw/\b/n\bno\bod\bde\be (\b(1\b1)\b)
+ 1\b12\b2.\b.1\b11\b14\b4.\b. s\bsh\bho\bow\bw/\b/n\bno\bod\bde\be (\b(1\b1)\b)
s\bsh\bho\bow\bw/\b/n\bno\bod\bde\be [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Show the type and version number of nodes
the non-user callsigns known to the system will be displayed.
- 1\b11\b1.\b.1\b11\b11\b1.\b. s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b11\b15\b5.\b. s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Interrogate the prefix database
- 1\b11\b1.\b.1\b11\b12\b2.\b. s\bsh\bho\bow\bw/\b/p\bpr\bro\bog\bgr\bra\bam\bm (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b11\b16\b6.\b. s\bsh\bho\bow\bw/\b/p\bpr\bro\bog\bgr\bra\bam\bm (\b(5\b5)\b)
s\bsh\bho\bow\bw/\b/p\bpr\bro\bog\bgr\bra\bam\bm Show the locations of all the included program modules
from.
- 1\b11\b1.\b.1\b11\b13\b3.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b11\b17\b7.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> [\b[<\b<l\blo\boc\bca\bat\bto\bor\br>\b>]\b] Show the distance between locators
s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\bla\bat\bt>\b> <\b<l\blo\bon\bng\bg>\b> Convert latitude and longitude to a locator
given on the command line) the distance and beraing from your station
to the locator. For example:-
+ SH/QRA IO92QL
+ SH/QRA JN06 IN73
- SH/QRA IO92QL
- SH/QRA JN06 IN73
for example:-
- SH/QRA 52 41 N 0 58 E
+
+ SH/QRA 52 41 N 0 58 E
- 1\b11\b1.\b.1\b11\b14\b4.\b. s\bsh\bho\bow\bw/\b/q\bqr\brz\bz (\b(0\b0)\b)
+
+ 1\b12\b2.\b.1\b11\b18\b8.\b. s\bsh\bho\bow\bw/\b/q\bqr\brz\bz (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/q\bqr\brz\bz <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show any callbook details on a callsign
provided for users of this software by http://www.qrz.com
- 1\b11\b1.\b.1\b11\b15\b5.\b. s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b11\b19\b9.\b. s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the route to <callsign>
- This command allows you to see which node the callsigns specified are
- connected. It is a sort of inverse sh/config.
+ This command allows you to see to which node the callsigns specified
+ are connected. It is a sort of inverse sh/config.
+
- sh/route n2tly
+ sh/route n2tly
- 1\b11\b1.\b.1\b11\b16\b6.\b. s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be (\b(0\b0)\b)
+
+ 1\b12\b2.\b.1\b12\b20\b0.\b. s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be <\b<n\bna\bam\bme\be>\b> [\b[<\b<h\bho\bou\bur\brs\bs>\b> <\b<i\bin\bnt\bte\ber\brv\bva\bal\bl>\b>]\b] Show satellite tracking
data
So for example:-
- SH/SAT AO-10
- SH/SAT FENGYUN1 12 2
+
+ SH/SAT AO-10
+ SH/SAT FENGYUN1 12 2
- 1\b11\b1.\b.1\b11\b17\b7.\b. s\bsh\bho\bow\bw/\b/s\bsu\bun\bn (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b12\b21\b1.\b. s\bsh\bho\bow\bw/\b/s\bsu\bun\bn (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/s
\bsu
\bun
\bn [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show sun rise and set times
For example:-
- SH/SUN
- SH/SUN G1TLH K9CW ZS
+
+ SH/SUN
+ SH/SUN G1TLH K9CW ZS
+
- 1\b11\b1.\b.1\b11\b18\b8.\b. s\bsh\bho\bow\bw/\b/t\bti\bim\bme\be (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b12\b22\b2.\b. s\bsh\bho\bow\bw/\b/t\bti\bim\bme\be (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/t
\bti
\bim
\bme
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show the local time
including DST) at the prefixes or callsigns that you specify.
- 1\b11\b1.\b.1\b11\b19\b9.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b12\b23\b3.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/w\bwc\bcy\by Show the last 10 WCY broadcasts
s\bsh\bho\bow\bw/\b/w\bwc\bcy\by <\b<n\bn>\b> Show the last <n> WCY broadcasts
system
- 1\b11\b1.\b.1\b12\b20\b0.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv (\b(0\b0)\b)
+
+
+ 1\b12\b2.\b.1\b12\b24\b4.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/w\bww\bwv\bv Show the last 10 WWV broadcasts
s\bsh\bho\bow\bw/\b/w\bww\bwv\bv <\b<n\bn>\b> Show the last <n> WWV broadcasts
- 1\b11\b1.\b.1\b12\b21\b1.\b. s\bsh\bhu\but\btd\bdo\bow\bwn\bn (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b12\b25\b5.\b. s\bsh\bhu\but\btd\bdo\bow\bwn\bn (\b(5\b5)\b)
s\bsh\bhu\but\btd\bdo\bow\bwn\bn Shutdown the cluster
set to respawn in /etc/inittab it will of course restart.
- 1\b11\b1.\b.1\b12\b22\b2.\b. s\bsp\bpo\boo\bof\bf (\b(9\b9)\b)
+ 1\b12\b2.\b.1\b12\b26\b6.\b. s\bsp\bpo\boo\bof\bf (\b(9\b9)\b)
s\bsp\bpo\boo\bof\bf <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> <\b<c\bco\bom\bmm\bma\ban\bnd\bd>\b> Run commands as another user
like home_node for example.
- 1\b11\b1.\b.1\b12\b23\b3.\b. s\bst\bta\bat\bt/\b/d\bdb\bb (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b12\b27\b7.\b. s\bst\bta\bat\bt/\b/d\bdb\bb (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/d\bdb\bb <\b<d\bdb\bbn\bna\bam\bme\be>\b> Show the status of a database
other than a sysop.
- 1\b11\b1.\b.1\b12\b24\b4.\b. s\bst\bta\bat\bt/\b/c\bch\bha\ban\bnn\bne\bel\bl (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b12\b28\b8.\b. s\bst\bta\bat\bt/\b/c\bch\bha\ban\bnn\bne\bel\bl (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/c\bch\bha\ban\bnn\bne\bel\bl <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the status of a channel on the cluster
Only the fields that are defined (in perl term) will be displayed.
- 1\b11\b1.\b.1\b12\b25\b5.\b. s\bst\bta\bat\bt/\b/m\bms\bsg\bg (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b12\b29\b9.\b. s\bst\bta\bat\bt/\b/m\bms\bsg\bg (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/m\bms\bsg\bg <\b<m\bms\bsg\bgn\bno\bo>\b> Show the status of a message
etc etc.
- 1\b11\b1.\b.1\b12\b26\b6.\b. s\bst\bta\bat\bt/\b/u\bus\bse\ber\br (\b(5\b5)\b)
+
+
+ 1\b12\b2.\b.1\b13\b30\b0.\b. s\bst\bta\bat\bt/\b/u\bus\bse\ber\br (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/u\bus\bse\ber\br <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the full status of a user
Only the fields that are defined (in perl term) will be displayed.
- 1\b11\b1.\b.1\b12\b27\b7.\b. s\bsy\bys\bso\bop\bp (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b13\b31\b1.\b. s\bsy\bys\bso\bop\bp (\b(0\b0)\b)
s\bsy\bys\bso\bop\bp Regain your privileges if you login remotely
numbers are returned that are indexes into the character array that is
your assigned password (see SET/PASSWORD). The indexes start from
zero.
+
You are expected to return a string which contains the characters
required in the correct order. You may intersperse those characters
with others to obscure your reply for any watchers. For example (and
these values are for explanation :-):
- password = 012345678901234567890123456789
- > sysop
- 22 10 15 17 3
+
+ password = 012345678901234567890123456789
+ > sysop
+ 22 10 15 17 3
+
you type:-
- aa2bbbb0ccc5ddd7xxx3n
- or 2 0 5 7 3
- or 20573
+
+ aa2bbbb0ccc5ddd7xxx3n
+ or 2 0 5 7 3
+ or 20573
+
case sensitive.
- 1\b11\b1.\b.1\b12\b28\b8.\b. t\bta\bal\blk\bk (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b13\b32\b2.\b. t\bta\bal\blk\bk (\b(0\b0)\b)
t\bta\bal\blk\bk <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Enter talk mode with <callsign>
t\bta\bal\blk\bk <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> <\b<t\bte\bex\bxt\bt>\b> Send a text message to <callsign>
cluster system. You can send it to anyone you can see with a
SHOW/CONFIGURATION command, they don't have to be connected locally.
+
The second form of TALK is used when other cluster nodes are connected
with restricted information. This usually means that they don't send
the user information usually associated with logging on and off the
normal command with a '/' character, eg:-
- /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
- /HELP talk
+
+ /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
+ /HELP talk
To leave talk mode type:
- /EX
+
+ /EX
- 1\b11\b1.\b.1\b12\b29\b9.\b. t\bty\byp\bpe\be (\b(0\b0)\b)
+
+ 1\b12\b2.\b.1\b13\b33\b3.\b. t\bty\byp\bpe\be (\b(0\b0)\b)
t\bty\byp\bpe\be <\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b>/\b/<\b<n\bna\bam\bme\be>\b> Look at a file in one of the fileareas
enter:-
- TYPE bulletins/arld051
+
+ TYPE bulletins/arld051
+
content.
- 1\b11\b1.\b.1\b13\b30\b0.\b. w\bwh\bho\bo (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b13\b34\b4.\b. w\bwh\bho\bo (\b(0\b0)\b)
w\bwh\bho\bo Show who is physically connected locally
This is a quick listing that shows which callsigns are connected and
what sort of connection they have
-
-
- 1\b11\b1.\b.1\b13\b31\b1.\b. w\bwx\bx (\b(0\b0)\b)
+ 1\b12\b2.\b.1\b13\b35\b5.\b. w\bwx\bx (\b(0\b0)\b)
w\bwx\bx <\b<t\bte\bex\bxt\bt>\b> Send a weather message to local users
w\bwx\bx f\bfu\bul\bll\bl <\b<t\bte\bex\bxt\bt>\b> Send a weather message to all cluster users
extreme that may indicate enhanced conditions
- 1\b11\b1.\b.1\b13\b32\b2.\b. w\bwx\bx (\b(e\ben\bnh\bha\ban\bnc\bce\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
+ 1\b12\b2.\b.1\b13\b36\b6.\b. w\bwx\bx (\b(e\ben\bnh\bha\ban\bnc\bce\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
w\bwx\bx s\bsy\bys\bso\bop\bp <\b<t\bte\bex\bxt\bt>\b> Send a weather message to other clusters only
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
projects / spider.git / blobdiff