add more routing code together with associated commands
[spider.git] / cmd / Commands_en.hlp
index dbfa1770083c46529e9c00a20539b605fedcc002..eaef20c9bb99fcd6ed413676efe3e1d1e65324b7 100644 (file)
@@ -15,7 +15,7 @@
 Create an 'accept this announce' line for a filter. 
 
 An accept filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
@@ -59,7 +59,7 @@ default for nodes and users eg:-
 Create an 'accept this spot' line for a filter. 
 
 An accept filter line means that if the spot matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
@@ -341,6 +341,7 @@ in debug mode i.e.
        perl -d cluster.pl
 
 It will interrupt the cluster just after the debug command has finished.
+
 === 0^DIRECTORY^List messages 
 === 0^DIRECTORY ALL^List all messages
 === 0^DIRECTORY OWN^List your own messages
@@ -738,7 +739,7 @@ As a sysop you may read any message on the system
 Create an 'reject this announce' line for a filter. 
 
 A reject filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
@@ -778,7 +779,7 @@ default for nodes and users eg:-
 Create a 'reject this spot' line for a filter. 
 
 A reject filter line means that if the spot matches this filter it is
-dumped (not passed on). See HELP FILTERS for more info. Please read this
+dumped (not passed on). See HELP FILTERING for more info. Please read this
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
@@ -926,19 +927,20 @@ SP is an alias for SEND PRIVATE
 
 === 5^SET/ARCLUSTER <call> [<call>..]^Make the callsign an AR-Cluster node
 
-=== 8^SET/BADDX <call>..^Stop spots for this callsign being propagated
-=== 8^UNSET/BADDX <call>..^Allow spots for this callsign again
-Setting a callsign as a 'baddx' will prevent spots of this callsign 
-going any further. They will not be displayed and they will not be 
-sent onto other nodes.
+=== 8^SET/BADDX <call>..^Stop words we do not wish to see in the callsign field
+of a dx spot being propagated
+=== 8^UNSET/BADDX <call>..^Allow a word to be seen again in a DX spot
+Setting a word as 'baddx' will prevent spots with that word in the 
+callsign field of a DX spot from going any further. They will not be 
+displayed and they will not be sent onto other nodes.
 
-The call must be a full eg:-
+The word must be wriiten in full, no wild cards are allowed eg:-
 
-  set/baddx FORSALE VIDEO FR0G 
+  set/baddx FORSALE VIDEO FR0G
 
-  unset/badnode VIDEO
+To allow a word again, use the following command ...
 
-will allow spots to that callsign again.
+  unset/baddx VIDEO
 
 === 8^SET/BADNODE <call>..^Stop spots from this node being propagated
 === 8^UNSET/BADNODE <call>..^Allow spots from this node again
@@ -965,26 +967,37 @@ Setting a callsign as a 'badspotter' will prevent spots from this callsign
 going any further. They will not be displayed and they will not be 
 sent onto other nodes.
 
-The call must be a full eg:-
+The call must be written in full, no wild cards are allowed eg:-
 
   set/badspotter VE2STN 
 
 will stop anything from VE2STN. If you want SSIDs as well then you must
 enter them specifically.
 
-  unset/badnode VE2STN
+  unset/badspotter VE2STN
 
 will allow spots from him again.
 
-Use with extreme care. This command may well be superceeded by FILTERing.
+Use with extreme care. This command may well be superceded by FILTERing.
 
 === 0^SET/BEEP^Add a beep to DX and other messages on your terminal
 === 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
 
+=== 5^SET/BBS <call> [<call>..]^Make the callsign a BBS
+
 === 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
 
 === 9^SET/DEBUG <name>^Add a debug level to the debug set
 === 9^UNSET/DEBUG <name>^Remove a debug level from the debug set
+You can choose to log several different levels.  The levels are
+
+chan
+state
+msg
+cron
+connect
+
+You can show what levels you are logging with SHOW/DEBUG
 
 === 0^SET/DX^Allow DX messages to come out on your terminal
 === 0^UNSET/DX^Stop DX messages coming out on your terminal
@@ -1183,6 +1196,21 @@ for more information.
 Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
 for more information.
 
+=== 0^SHOW/CONFIGURATION [<node>]^Show all the nodes and users visible
+This command allows you to see all the users that can be seen
+and the nodes to which they are connected.
+
+This command is normally abbreviated to: sh/c
+
+BE WARNED: the list that is returned can be VERY long
+
+=== 0^SHOW/CONFIGURATION/NODE^Show all the nodes connected locally
+Show all the nodes connected to this node.
+
+=== 1^SHOW/CONNECT^Show all the active connections
+This command shows information on all the active connections known to
+the node. This command gives slightly more information than WHO.
+
 === 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time 
 This is very nearly the same as SHOW/TIME, the only difference the format
 of the date string if no arguments are given.
@@ -1192,6 +1220,8 @@ time and UTC as the computer has it right now. If you give some prefixes
 then it will show UTC and UTC + the local offset (not including DST) at
 the prefixes or callsigns that you specify.
 
+=== 9^SHOW/DEBUG^Show what levels of debug information you are logging
+
 === 0^SHOW/DX^Interrogate the spot database
 If you just type SHOW/DX you will get the last so many spots
 (sysop configurable, but usually 10).
@@ -1276,6 +1306,11 @@ all the categories will be listed.
 
 === 9^SHOW/LOCKOUT^Show the list of locked out or excluded callsigns
 
+=== 8^SHOW/LOG [<callsign>]^Show excerpts from the system log
+This command outputs a short section of the system log.  On its own
+it will output a general logfile.  With the optional callsign it will
+show output from the log associated with that callsign.
+
 === 0^SHOW/MOON [<prefix>|<callsign>]^Show Moon rise and set times
 Show the Moon rise and set times for a (list of) prefixes or callsigns, 
 together with the azimuth and elevation of the sun currently at those
@@ -1487,10 +1522,18 @@ you are on or else for the callsign that you asked for.
 
 Only the fields that are defined (in perl term) will be displayed.
 
-=== 5^STAT/MSG <msgno>^Show the status of a message
+=== 1^STAT/MSG^Show the status of the message system
+=== 1^STAT/MSG <msgno>^Show the status of a message
 This command shows the internal status of a message and includes information
 such as to whom it has been forwarded, its size, origin etc etc.
 
+If no message number is given then the status of the message system is 
+displayed.
+
+=== 5^STAT/ROUTE_NODE <callsign>^Show the data in a Route::Node object
+
+=== 5^STAT/ROUTE_USER <callsign>^Show the data in a Route::User object
+
 === 5^STAT/USER [<callsign>]^Show the full status of a user
 Shows the full contents of a user record including all the secret flags
 and stuff.