see CLEAR/SPOTS for a more detailed explanation.
-=== 8^CLEAR/ANNOUNCE [input] <callsign> [0-9|all]^Clear a announce filter line
+=== 8^CLEAR/ANNOUNCE <callsign> [input] [0-9|all]^Clear a announce filter line
A sysop can clear an input or normal output filter for a user or the
node_default or user_default.
see CLEAR/SPOTS for a more detailed explanation.
-=== 8^CLEAR/ROUTE [input] <callsign> [0-9|all]^Clear a route filter line
+=== 8^CLEAR/ROUTE <callsign> [input] [0-9|all]^Clear a route filter line
A sysop can clear an input or normal output filter for a user or the
node_default or user_default.
the filter will be completely removed.
-=== 8^CLEAR/SPOTS [input] <callsign> [0-9|all]^Clear a spot filter line
+=== 8^CLEAR/SPOTS <callsign> [input] [0-9|all]^Clear a spot filter line
A sysop can clear an input or normal output filter for a user or the
node_default or user_default.
see CLEAR/SPOTS for a more detailed explanation.
-=== 8^CLEAR/WCY [input] <callsign> [0-9|all]^Clear a WCY filter line
+=== 8^CLEAR/WCY <callsign> [input] [0-9|all]^Clear a WCY filter line
A sysop can clear an input or normal output filter for a user or the
node_default or user_default.
see CLEAR/SPOTS for a more detailed explanation.
-=== 8^CLEAR/WWV [input] <callsign> [0-9|all]^Clear a WWV filter line
+=== 8^CLEAR/WWV <callsign> [input] [0-9|all]^Clear a WWV filter line
A sysop can clear an input or normal output filter for a user or the
node_default or user_default.
=== 9^UNSET/DEBUG <name>^Remove a debug level from the debug set
You can choose to log several different levels. The levels are
-chan
-state
-msg
-cron
-connect
+ chan
+ state
+ msg
+ cron
+ connect
You can show what levels you are logging with SHOW/DEBUG
=== 0^SET/DX^Allow DX messages to come out on your terminal
=== 0^UNSET/DX^Stop DX messages coming out on your terminal
+=== 0^SET/DXCQ^Show CQ Zones on the end of DX announcements
+=== 0^UNSET/DXCQ^Stop CQ Zones on the end of DX announcements
+Display both the Spotter's and the Spotted's CQ Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's CQ is on the RHS of the
+time, the Spotted's CQ is on the LHS.
+
+Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE
+
+Do a STAT/USER to see which flags you have set if you are confused.
+
+=== 0^SET/DXITU^Show ITU Zones on the end of DX announcements
+=== 0^UNSET/DXITU^Stop ITU Zones on the end of DX announcements
+Display both the Spotter's and the Spotted's ITU Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's ITU is on the RHS of the
+time, the Spotted's ITU is on the LHS.
+
+Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE
+
+Do a STAT/USER to see which flags you have set if you are confused.
+
=== 0^SET/DXGRID^Allow QRA Grid Squares on the end of DX announcements
=== 0^UNSET/DXGRID^Stop QRA Grid Squares on the end of DX announcements
A standard feature which is enabled in version 1.43 and above is
cannot cope with this. You can use this command to reset (or set)
this feature.
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.
+
=== 5^SET/DXNET <call> [<call>..]^Make the callsign an DXNet node
=== 0^SET/ECHO^Make the cluster echo your input
see also DELETE/USDB
+=== 0^SET/USSTATE^Allow US State info on the end of DX announcements
+=== 0^UNSET/USSTATE^Stop US State info on the end of DX announcements
+If the spotter's or spotted's US State is known it is output on the
+end of a DX announcement (there is just enough room).
+
+A spotter's state will appear on the RHS of the time (like
+SET/DXGRID) and the spotted's State will appear on the LHS of the
+time field. Any information found will override any locator
+information from SET/DXGRID.
+
+Some user programs cannot cope with this. You can use this command
+to reset (or set) this feature.
+
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.
+
=== 0^SET/WCY^Allow WCY messages to come out on your terminal
=== 0^UNSET/WCY^Stop WCY messages coming out on your terminal
This command is normally abbreviated to: sh/c
+Normally, the list returned will be just for the nodes from your
+country (because the list otherwise will be very long).
+
+ SH/C ALL
+
+will produce a complete list of all nodes.
+
BE WARNED: the list that is returned can be VERY long
+It is possible to supply a node or part of a prefix and you will get
+a list of the users for that node or list of nodes starting with
+that prefix.
+
+ SH/C GB7DJK
+
+ SH/C SK
+
=== 0^SHOW/CONFIGURATION/NODE^Show all the nodes connected locally
Show all the nodes connected to this node.
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
+=== 0^SHOW/DB0SDX <callsign>^Show QSL infomation from DB0SDX database
+This command queries the DB0SDX QSL server on the internet
+and returns any information available for that callsign. This service
+is provided for users of this software by http://www.qslinfo.de.
+
+See also SHOW/QRZ, SHOW/WM7D.
+
=== 9^SHOW/DEBUG^Show what levels of debug information you are logging
=== 0^SHOW/DX^Interrogate the spot database
In addition you can add any number of these commands in very nearly
any order to the basic SHOW/DX command, they are:-
-on <band> - eg 160m 20m 2m 23cm 6mm
-on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
-on <from>/<to> - eg 1000/4000 14000-30000 (in Khz)
- <from>-<to>
+ on <band> - eg 160m 20m 2m 23cm 6mm
+ on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
+ on <from>/<to> - eg 1000/4000 14000-30000 (in Khz)
+ <from>-<to>
-<number> - the number of spots you want
-<from>-<to> - <from> spot no <to> spot no in the selected list
-<from>/<to>
+ <number> - the number of spots you want
+ <from>-<to> - <from> spot no <to> spot no in the selected list
+ <from>/<to>
-<prefix> - for a spotted callsign beginning with <prefix>
-*<suffix> - for a spotted callsign ending in <suffix>
-*<string>* - for a spotted callsign containing <string>
+
<prefix> - for a spotted callsign beginning with <prefix>
+ *<suffix> - for a spotted callsign ending in <suffix>
+ *<string>* - for a spotted callsign containing <string>
-day <number> - starting <number> days ago
-day <from>-<to> - <from> days <to> days ago
- <from>/<to>
+ day <number> - starting <number> days ago
+ day <from>-<to> - <from> days <to> days ago
+ <from>/<to>
-info <text> - any spots containing <text> in the info or remarks
-
-by <call> - any spots spotted by <call> (spotter <call> is the
- same).
+ info <text> - any spots containing <text> in the info or remarks
+
+ by <call> - any spots spotted by <call> (spotter <call> is the
+ same).
-qsl - this automatically looks for any qsl info on the call
- held in the spot database.
+ qsl - this automatically looks for any qsl info on the call
+ held in the spot database.
-iota [<iota>] - If the iota island number is missing it will look for
+ iota [<iota>] - If the iota island number is missing it will look for
the string iota and anything which looks like an iota
island number. If you specify then it will look for
that island.
-qra [<locator>] - this will look for the specific locator if you specify
- one or else anything that looks like a locator.
+ qra [<locator>] - this will look for the specific locator if you specify
+ one or else anything that looks like a locator.
-dxcc - treat the prefix as a 'country' and look for spots
- from that country regardless of actual prefix.
- eg dxcc oq2
+ dxcc - treat the prefix as a 'country' and look for spots
+ from that country regardless of actual prefix.
+ eg dxcc oq2
- You can also use this with the 'by' keyword so
- eg by W dxcc
+ You can also use this with the 'by' keyword so
+ eg by W dxcc
-e.g.
+ e.g.
SH/DX 9m0
SH/DX on 20m info iota
given on the command line) the distance and beraing from your station
to the locator. For example:-
-SH/QRA IO92QL
-SH/QRA JN06 IN73
+ SH/QRA IO92QL
+ SH/QRA JN06 IN73
The first example will show the distance and bearing to the locator from
yourself, the second example will calculate the distance and bearing from
using this command with a latitude and longitude as an argument, for
example:-
-SH/QRA 52 41 N 0 58 E
+ SH/QRA 52 41 N 0 58 E
=== 0^SHOW/QRZ <callsign>^Show any callbook details on a callsign
This command queries the QRZ callbook server on the internet
and returns any information available for that callsign. This service
is provided for users of this software by http://www.qrz.com
+See also SHOW/WM7D for an alternative.
+
=== 9^SHOW/REGISTERED [<prefix>]^Show the registered users
=== 0^SHOW/ROUTE <callsign> ...^Show the route to the callsign
This command allows you to see to which node the callsigns specified are
connected. It is a sort of inverse sh/config.
-sh/route n2tly
+ sh/route n2tly
=== 0^SHOW/SATELLITE <name> [<hours> <interval>]^Show tracking data
Show the tracking data from your location to the satellite of your choice
So for example:-
-SH/SAT AO-10
-SH/SAT FENGYUN1 12 2
+ SH/SAT AO-10
+ SH/SAT FENGYUN1 12 2
=== 6^SHOW/STATION ALL [<regex>]^Show list of users in the system
=== 0^SHOW/STATION [<callsign> ..]^Show information about a callsign
=== 0^SHOW/WCY^Show last 10 WCY broadcasts
=== 0^SHOW/WCY <n>^Show last <n> WCY broadcasts
Display the most recent WCY information that has been received by the system
+
+=== 0^SHOW/WM7D <callsign>^Show callbook details on a US callsigns
+This command queries the WM7D callbook server on the internet
+and returns any information available for that US callsign. This service
+is provided for users of this software by http://www.wm7d.net.
+
+See also SHOW/QRZ.
=== 0^SHOW/WWV^Show last 10 WWV broadcasts
=== 0^SHOW/WWV <n>^Show last <n> WWV broadcasts
projects / spider.git / blobdiff