You can use any of the following things in this line:-
freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
call <prefixes> eg: G,PA,HB9
info <string> eg: iota or qsl
by <prefixes>
accept/spot user_default by G,M,2
+=== 0^ACCEPT/WCY [0-9] <pattern>^set an 'accept' WCY filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+There are no examples because WCY Broadcasts only come from one place and
+you either want them or not (see UNSET/WCY if you don't want them).
+
+This command is really provided for future use.
+
+See HELP FILTER for information.
+
+=== 8^ACCEPT/WCY <call> [input] [0-9] <pattern>^WCY filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ accept/wcy node_default all
+ set/hops node_default 10
+
+=== 0^ACCEPT/WWV [0-9] <pattern>^set an 'accept' WWV filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+for example
+
+ accept/wwv by_zone 4
+
+is probably the only useful thing to do (which will only show WWV broadcasts
+by stations in the US).
+
+See HELP FILTER for information.
+
+=== 8^ACCEPT/WWV <call> [input] [0-9] <pattern>^WWV filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ accept/wwv db0sue-7 1 by_zone 4
+ accept/wwv node_default all
+ set/hops node_default 10
+
+ accept/wwv user_default by W,K
+
=== 0^ANNOUNCE <text>^Send an announcement to LOCAL users only
<text> is the text of the announcement you wish to broadcast
You can use any of the following things in this line:-
freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
call <prefixes> eg: G,PA,HB9
info <string> eg: iota or qsl
by <prefixes>
reject/spot user_default by G,M,2
+=== 0^REJECT/WCY [0-9] <pattern>^set an 'reject' WCY filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+There are no examples because WCY Broadcasts only come from one place and
+you either want them or not (see UNSET/WCY if you don't want them).
+
+This command is really provided for future use.
+
+See HELP FILTER for information.
+
+=== 8^REJECT/WCY <call> [input] [0-9] <pattern>^WCY filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ reject/wcy gb7djk all
+
+=== 0^REJECT/WWV [0-9] <pattern>^set an 'reject' WWV filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+for example
+
+ reject/wwv by_zone 14,15,16
+
+is probably the only useful thing to do (which will only show WWV broadcasts
+by stations in the US).
+
+See HELP FILTER for information.
+
+=== 8^REJECT/WWV <call> [input] [0-9] <pattern>^WWV filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ reject/wwv db0sue-7 1 by_zone 4
+ reject/wwv node_default all
+
+ reject/wwv user_default by W
+
=== 0^REPLY^Reply (privately) to the last message that you have read
=== 0^REPLY <msgno>^Reply (privately) to the specified message
=== 0^REPLY B <msgno>^Reply as a Bulletin to the specified message
=== 5^SET/ARCLUSTER <call> [<call>..]^Make the callsign an AR-Cluster node
+=== 6^SET/BADNODE <call>^Stop spots from this callsign being propagated
+=== 6^UNSET/BADNODE <call>^Allow spots from this callsign again
+Setting a callsign as a 'badnode' will prevent spots from that node
+going any further. They will not be displayed and they will not be
+sent onto other nodes.
+
+The call can be a full or partial call (or a prefix), eg:-
+
+ set/badnode K1TTT
+
+will stop anything from K1TTT (including any SSID's)
+
+ unset/badnode K1TTT
+
+will allow spots from him again.
+
+Use with extreme care. This command may well be superceeded by FILTERing.
+
=== 0^SET/BEEP^Add a beep to DX and other messages on your terminal
=== 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
=== 0^SET/WX^Allow WX messages to come out on your terminal
=== 0^UNSET/WX^Stop WX messages coming out on your terminal
-=== 0^SHOW/CALL <callsign>^Show any callbook details on a callsign
-This command queries an international callbook server on the internet
-and returns any information available for that callsign.
+=== 6^SHOW/BADNODE^Show all the bad nodes in the system
+Display all the bad node callsigns in the system, see SET/BADNODE
+for more information.
=== 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time
This is very nearly the same as SHOW/TIME, the only difference the format
SH/QRA 52 41 N 0 58 E
+=== 0^SHOW/QRZ <callsign>^Show any callbook details on a callsign
+This command queries the QRZ callbook server on the internet
+and returns any information available for that callsign. This service
+is provided for users of this software by http://www.qrz.com
+
=== 0^SHOW/SATELLITE <name> [<hours> <interval>]^Show tracking data
Show the tracking data from your location to the satellite of your choice
from now on for the next few hours.
projects / spider.git / blobdiff