This uses the subject field, so any messages that have exactly the same subject
will be deleted. Beware!
+=== 0^LINKS^Show which nodes is physically connected
+This is a quick listing that shows which links are connected and
+some information about them. See WHO for a list of all connections.
+
=== 9^LOAD/ALIASES^Reload the command alias table
Reload the /spider/cmd/Aliases file after you have editted it. You will need to
do this if you change this file whilst the cluster is running in order for the
=== 0^SET/DX^Allow DX messages to come out on your terminal
=== 0^UNSET/DX^Stop DX messages coming out on your terminal
+=== 0^SET/ECHO^Make the cluster echo your input
+=== 0^UNSET/ECHO^Stop the cluster echoing your input
+If you are connected via a telnet session, different implimentations
+of telnet handle echo differently depending on whether you are
+connected via port 23 or some other port. You can use this command
+to change the setting appropriately.
+
+The setting is stored in your user profile.
+
+YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
+
=== 0^SET/HERE^Tell the system you are present at your terminal
=== 0^UNSET/HERE^Tell the system you are absent from your terminal
SET/PAGE 30
SET/PAGE 0
+The setting is stored in your user profile.
+
=== 9^SET/PINGINTERVAL <time> <nodecall>^Set ping time to neighbouring nodes
As from release 1.35 all neighbouring nodes are pinged at regular intervals
in order to determine the rolling quality of the link and, in future, to
=== 0^SET/TALK^Allow TALK messages to come out on your terminal
=== 0^UNSET/TALK^Stop TALK messages coming out on your terminal
+=== 0^SET/WCY^Allow WCY messages to come out on your terminal
+=== 0^UNSET/WCY^Stop WCY messages coming out on your terminal
+
=== 0^SET/WWV^Allow WWV messages to come out on your terminal
=== 0^UNSET/WWV^Stop WWV messages coming out on your terminal
See also TYPE - to see the contents of a file.
+=== 1^SHOW/ISOLATE^Show list of ISOLATED nodes
+
+=== 9^SHOW/LOCKOUT^Show the list of locked out or excluded callsigns
+
=== 0^SHOW/MOON [<prefix>|<callsign>]^Show Moon rise and set times
Show the Moon rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
+=== 0^SHOW/WCY^Show last 10 WCY broadcasts
+=== 0^SHOW/WCY <n>^Show last <n> WCY broadcasts
+Display the most recent WCY information that has been received by the system
+
=== 0^SHOW/WWV^Show last 10 WWV broadcasts
=== 0^SHOW/WWV <n>^Show last <n> WWV broadcasts
Display the most recent WWV information that has been received by the system