# if the command ends in a - then that line isn't printed, but any
# subsequent lines are
#
+#
+#
# Comment lines are indented before printing
#
=== 0^ACCEPT^Set a filter to accept something
can get confused if you are doing a lot of moving commands about or
delete a command in the local_cmd tree and want to use the normal one
again. Execute this command to reset everything back to the state it
-was just after a cluster restart.
+was just after a cluster restart. To see what is in the command cache
+see SHOW/CMD_CACHE.
=== 9^LOAD/FORWARD^Reload the msg forwarding routing table
Reload the /spider/msg/forward.pl file if you have changed it
Use with extreme care. This command may well be superceded by FILTERing.
+This command will also stop TALK and ANNOUNCE/FULL from any user marked
+as a BADSPOTTER.
+
=== 8^SET/BADWORD <word>..^Stop things with this word being propagated
=== 8^UNSET/BADWORD <word>..^Propagate things with this word again
Setting a word as a 'badword' will prevent things like spots,
=== 5^SET/BBS <call> [<call>..]^Make the callsign a BBS
+=== 0^SET/BUDDY <call> [<call>..]^Add this call to my buddy list
+=== 0^UNSET/BUDDY <call> [<call>..]^Remove this call from my buddy list
+A notification message
+is sent to you automatically if anybody on your buddy list logs in or
+out of any node in this cluster.
+
=== 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
=== 9^SET/DEBUG <name>^Add a debug level to the debug set
the languages available are en (English), de (German), es (Spanish),
Czech (cz), French (fr), Portuguese (pt), Italian (it) and nl (Dutch).
+=== 5^SET/LOCAL_NODE^Add node to the local_node group
+=== 5^UNSET/LOCAL_NODE^Remove node from the local_node group
+The 'local_node' group is a group of nodes that you want a user
+to perceive as effectively one big node. At the moment, this extends
+only to announcing whenever a user is logging in or out of one of
+the nodes in the group (if those users have SET/LOGININFO).
+
+The local node group is as setup on this node. If you want the other
+nodes to also include this node and all the other nodes specified, then
+you must get those nodes to also run this command (or rcmd them to do
+so).
+
+In principle, therefore, each node determines its own local node group
+and these can overlap with other nodes' views.
+
=== 0^SET/LOCATION <lat & long>^Set your latitude and longitude
=== 9^SET/SYS_LOCATION <lat & long>^Set your cluster latitude and longitude
In order to get accurate headings and such like you must tell the system
then this command will set your QRA locator for you. For example:-
SET/LOCATION 52 22 N 0 57 E
-=== 0^SET/LOGININFO^Inform when a station logs in locally
-=== 0^UNSET/LOGININFO^Inform when a station logs out locally
+=== 0^SET/LOGININFO^Inform when a station logs in/out locally
+=== 0^UNSET/LOGININFO^No longer inform when a station logs in/out locally
=== 9^SET/LOCKOUT <call>^Stop a callsign connecting to the cluster
=== 9^UNSET/LOCKOUT <call>^Allow a callsign to connect to the cluster
Display all the bad words in the system, see SET/BADWORD
for more information.
+=== 0^SHOW/BUDDY^Show your list of buddies
+See SET/BUDDY for more information about buddies.
+
=== 0^SHOW/CHAT [<group>] [<lines>]^Show any chat or conferencing
This command allows you to see any chat or conferencing that has
occurred whilst you were away. SHOW/CHAT on its own will show data for
all groups. If you use a group name then it will show only chat for
that group.
+=== 9^SHOW/CMD_CACHE [pattern]^Show the real source path of commands
+It is possible in DXSpider to define local versions of commands.
+Sometimes one forgets that one has these. This command will show you
+the source path where the node is getting each one of its commands.
+
+If you find a local command that you don't want then then simply
+delete it, run LOAD/CMD_CACHE to clear out the command cache and
+try again. You will now be using the standard version.
+
+If you are looking for information on a specific command then
+just add a string, eg:
+
+ sh/cmd dx
+
+might give you:
+
+ Command Path
+ set/dxgrid /spider/cmd/set/dxgrid.pl
+ sh/dx /spider/cmd/show/dx.pl
+
=== 0^SHOW/CONFIGURATION [<node>]^Show all the nodes and users visible
This command allows you to see all the users that can be seen
and the nodes to which they are connected.
Show the contents of all the filters that are set. This command displays
all the filters set - for all the various categories.
+=== 0^SHOW/GRAYLINE [ndays] [<prefix>|<callsign>]^Show Civil dawn/dusk times
+This command is very similar to SHOW/SUN except that it shows the
+start and end of "Official" or "Civil" Dawn and Dusk. This is defined
+as when the Sun is 6 degrees below the horizon.
+
+If you don't specify any prefixes or callsigns, it will show the
+times for your QTH (assuming you have set it with either SET/LOCATION
+or SET/QRA), together with the current azimuth and elevation.
+
+If all else fails it will show the civil dawn and dusk times for
+the node that you are connected to.
+
+For example:-
+
+ SH/GRAYLINE
+ SH/GRAYLINE G1TLH W5UN
+
+You can also use this command to see into the past or the future, so
+if you want to see yesterday's times then do:-
+
+ SH/GRAYLINE -1
+
+or in three days time:-
+
+ SH/GRAYLINE +3 W9
+
+Upto 366 days can be checked both in the past and in the future.
+
+Please note that the times are given as the UT times of the requested
+UT day.
+
=== 0^SHOW/HFSTATS [days] [date]^Show the HF DX Statistics
Show the HF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a <date> (default: today).