fixed sh/node

[spider.git] / cmd / Commands_en.hlp

diff --git a/cmd/Commands_en.hlp b/cmd/Commands_en.hlp
index 5ef9126f57e131ee20cf97b78f7fd753c46f64f4..585811d29b4710a00bd777b2998cb036839d8d5e 100644 (file)
--- a/cmd/Commands_en.hlp
+++ b/cmd/Commands_en.hlp
@@ -300,6 +300,10 @@ delete a command in the local_cmd tree and want to use the normal one
 again. Execute this command to reset everything back to the state it
 was just after a cluster restart.
 
+=== 9^LOAD/FORWARD^Reload the msg forwarding routing table
+Reload the /spider/msg/forward.pl file if you have changed it
+manually whilst the cluster is running.
+
 === 9^LOAD/MESSAGES^Reload the system messages file
 If you change the /spider/perl/Messages file (usually whilst
 fiddling/writing new commands) you can have them take effect during a
@@ -446,9 +450,13 @@ SP is an alias for SEND PRIVATE
 === 0^SET/ANNOUNCE^Allow announce messages to come out on your terminal
 === 0^UNSET/ANNOUNCE^Stop announce messages coming out on your terminal
 
+=== 5^SET/ARCLUSTER <call> [<call>..]^Make the callsign an AR-Cluster node
+
 === 0^SET/BEEP^Add a beep to DX and other messages on your terminal
 === 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
 
+=== 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
+
 === 9^SET/DEBUG <name>^Add a debug level to the debug set
 === 9^UNSET/DEBUG <name>^Remove a debug level from the debug set
 
@@ -463,6 +471,8 @@ of a DX announcement (there is just enough room). Some user programs
 cannot cope with this. You can use this command to reset (or set)
 this feature.
 
+=== 5^SET/DXNET <call> [<call>..]^Make the callsign an DXNet node
+
 === 0^SET/ECHO^Make the cluster echo your input
 === 0^UNSET/ECHO^Stop the cluster echoing your input
 If you are connected via a telnet session, different implimentations
@@ -514,11 +524,11 @@ then this command will set your QRA locator for you. For example:-
 Tell the system what your name is eg:-
   SET/NAME Dirk
 
-=== 9^SET/NODE <call> [<call>..]^Make the callsign an AK1A cluster
+=== 5^SET/NODE <call> [<call>..]^Make the callsign an AK1A cluster
 Tell the system that the call(s) are to be treated as AK1A cluster and
 fed PC Protocol rather normal user commands.
 
-=== 9^SET/OBSCOUNT <count> <nodecall>^Set the 'pump-up' obscelence counter 
+=== 8^SET/OBSCOUNT <count> <nodecall>^Set the 'pump-up' obscelence counter 
 From 1.35 onwards neighbouring nodes are pinged at regular intervals (see
 SET/PINGINTERVAL), usually 300 seconds or 5 minutes. There is a 'pump-up'
 counter which is decremented on every outgoing ping and then reset to
@@ -575,7 +585,7 @@ can contain any characters but any spaces are removed (you can type in
 spaces - but they won't appear in the password). You can see the
 result with STAT/USER.
 
-=== 9^SET/SPIDER <call> [<call>..]^Make the callsign an DXSpider node
+=== 5^SET/SPIDER <call> [<call>..]^Make the callsign an DXSpider node
 Tell the system that the call(s) are to be treated as DXSpider node and
 fed new style DX Protocol rather normal user commands.
 
@@ -864,6 +874,16 @@ Display the most recent WWV information that has been received by the system
 === 5^SHUTDOWN^Shutdown the cluster
 Shutdown the cluster and disconnect all the users 
 
+=== 9^SPOOF <call> <command>^Do a command as though you are another user
+This command is provided so that sysops can set a user's parameters without
+me having to write a special 'sysop' version for every user command. It
+allows you to pretend that you are doing the command as the user you specify.
+
+eg:-
+
+   SPOOF G1TLH set/name Dirk
+   SPOOF G1TLH set/qra JO02LQ
+
 === 5^STAT/DB <dbname>^Show the status of a database
 Show the internal status of a database descriptor.
 
@@ -911,8 +931,8 @@ They will all match. If there is no password you will still be offered
 numbers but nothing will happen when you input a string. Any match is
 case sensitive.
 
-=== 0^TALK <call> <text>^Send a text message to another station
-=== 0^TALK <call> > <node> <text>^Send a text message to another station via a node
+=== 0^TALK <call> [<text>]^Send a text message to another station
+=== 0^TALK <call> > <node> [<text>]^Send a text message to another station via a node
 Send a short message to any other station that is visible on the cluster
 system. You can send it to anyone you can see with a SHOW/CONFIGURATION 
 command, they don't have to be connected locally.
@@ -925,6 +945,25 @@ If you know that G3JNB is likely to be present on GB7TLH, but you can only
 see GB7TLH in the SH/C list but with no users, then you would use the
 second form of the talk message.
 
+If you want to have a ragchew with someone you can leave the text message
+out and the system will go into 'Talk' mode. What this means is that a
+short message is sent to the recipient telling them that you are in a
+'Talking' frame of mind and then you just type - everything you send will
+go to the station that you asked for. 
+
+All the usual announcements, spots and so on will still come out on your
+terminal.
+
+If you want to do something (such as send a spot) you preceed the normal 
+command with a '/' character, eg:-
+
+   /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
+   /HELP talk
+
+To leave talk mode type:
+   
+   /EX
+
 === 0^TYPE <filearea>/<name>^Look at the contents of a file in one of the fileareas
 Type out the contents of a file in a filearea. So, for example, in 
 filearea 'bulletins' you want to look at file 'arld051' you would