--- /dev/null
+#!/usr/bin/perl
+
+use DBI;
+use strict;
+use Device::SerialPort;
+use Time::HiRes;
+
+my $devname = "/dev/davis";
+my $dbsort = "SQLite";
+my $db="weather.db";
+my $host="";
+my $userid="";
+my $passwd="";
+my $connectionInfo="dbi:$dbsort:$db";
+$connectionInfo .= ":$host" if $host;
+
+# make connection to database
+my %attr = ( PrintError => 0, RaiseError => 0 );
+my $dbh = DBI->connect($connectionInfo,$userid,$passwd,\%attr) or die "Couldn't connect to database: " . DBI->errstr;
+
+
+my ($count, $result);
+my %hsh;
+my @crc_table=();
+my %bar_trend=();
+load_crc_table();
+
+my $ob = Device::SerialPort->new ($devname) || die;
+
+$ob->user_msg(1); # misc. warnings
+$ob->error_msg(1); # hardware and data errors
+
+$ob->baudrate(19200);
+$ob->parity("none");
+#$ob->parity_enable(1); # for any parity except "none"
+$ob->databits(8);
+$ob->stopbits(1);
+$ob->handshake('none');
+$ob->read_const_time(15000); # ultimate timeout (15 seconds)
+$ob->write_settings||die"setting failed";
+
+
+my $awake=0;
+my $attempts=0;
+$ob->write("\n"); # initial wake
+
+while ($awake==0) {
+ $ob->write("\n"); # wake for real
+ $ob->read_interval(600); # wait for a max of 600ms
+ ($count, $result) = $ob->read(10); # read up to 10 chars
+ if ($result eq "\n\r") {
+ print "awoke on attempt $attempts :)\n";
+ $awake=1;
+ } else {
+ print "wake error on attempt $attempts :(\n";
+ }
+ $attempts++;
+ dienice("failed to wake device - tried $attempts times") unless $attempts<6;
+}
+
+$ob->write("LAMPS 0\n");
+$ob->read_interval(300); # wait for a max of 300ms
+($count, $result) = $ob->read(8); # read up to 8 chars
+$result=~s/(\r|\n)//g;
+if ($result eq "OK") {
+ print "lamps on :)\n";
+} else {
+ dienice("lamp error '$result'");
+}
+
+
+
+my $ref=gettime();
+$ref->[5]+=1900;
+print "$ref->[2]:$ref->[1]:$ref->[0] $ref->[3]/$ref->[4]/$ref->[5]\n";
+
+#settime();
+
+#do_dmpaft();
+
+while (1) {
+ get_loop(); # if you do anything after here - you need to wake up the device again
+ print "** do something else\n";
+ sleep 5;
+ $ob->write("\r"); # wake
+ $ob->read_interval(500); # wait for a max of 300ms
+ my ($count, $result) = $ob->read(4096); # read any crap up to 4096 chars
+}
+
+#print "count=$count $result\n";
+#for(my $i=0; $i<$count; $i++)
+#{ printf("%02d ",ord(substr($result,$i,1))); }
+
+#$ob->write("WRD\x12\x4d\n");
+
+undef $ob;
+exit 0;
+
+sub dienice
+{
+ my $err=shift;
+ print "$err\n";
+ undef $ob;
+ exit 9;
+}
+
+sub parse_loop_blck
+{
+ my $blk = shift;
+ my $loo = substr $blk,0,3;
+ unless ( $loo eq 'LOO') {
+ warn("Block invalid loo -> $loo\n"); return "";
+ }
+ my $t;
+
+ #$hsh{'next_rec'} = unpack("s", substr $blk,5,2);
+
+ $hsh{'Barometric_Trend'} = unpack("C", substr $blk,3,1);
+ $hsh{'Barometric_Trend_txt'} = $bar_trend{$hsh{'Barometric_Trend'}};
+ $t = unpack("s", substr $blk,7,2) / 1000;
+ # $hsh{'Barometric_Press_hg'} = $t;
+ $hsh{'Barometric_Press_mb'} = sprintf("%.2f",$t*33.8637526);
+
+
+ $t = unpack("s", substr $blk,9,2) / 10;
+ # $hsh{'Air_Temp_Inside_f'} = $t;
+ $hsh{'Air_Temp_Inside_c'} = sprintf("%.1f",($t - 32) * 5/9);
+ my $tf = unpack("s", substr $blk,12,2) / 10;
+ # $hsh{'Air_Temp_Outside_f'} = $tf;
+ $hsh{'Air_Temp_Outside_c'} = sprintf("%.1f",($tf - 32) * 5/9);
+
+ $hsh{'Wind_Speed_mph'} = unpack("C", substr $blk,14,1);
+ # $hsh{'Wind_Speed_mps'} = sprintf("%.1f",$hsh{'Wind_Speed_mph'}*0.44704);
+ $hsh{'Wind_Speed_10min_Avg_mph'} = unpack("C", substr $blk,15,1);
+ # $hsh{'Wind_Speed_10min_Avg_mps'} = sprintf("%.1f",$hsh{'Wind_Speed_10min_Avg_mph'}*0.44704);
+ $hsh{'Wind_Dir'} = unpack("s", substr $blk,16,2);
+
+
+ $hsh{'Humidity_Outside'} = unpack("C", substr $blk,33,1);
+ $hsh{'Humidity_Inside'} = unpack("C", substr $blk,11,1);
+ $hsh{'Dew_Point'} = dew_point($tf, $hsh{'Humidity_Outside'});
+
+ # $hsh{'UV'} = unpack("C", substr $blk,43,1);
+ # $hsh{'Solar'} = unpack("s", substr $blk,44,2); # watt/m**2
+
+ $hsh{'Rain_Rate'} = (unpack("s", substr $blk,41,2) / 100) * 25.4; # Inches per hr converted to mm
+ $hsh{'Rain_Storm'} = (unpack("s", substr $blk,46,2) / 100) * 25.4; # Inches per storm
+ #$hsh{'Storm_Date'} = unpack("s", substr $blk,48,2); # Need to parse data (not sure what this is)
+ $hsh{'Rain_Day'} = (unpack("s", substr $blk,50,2)/100) * 25.4;
+ $hsh{'Rain_Month'} = (unpack("s", substr $blk,52,2)/100) * 25.4;
+ $hsh{'Rain_Year'} = (unpack("s", substr $blk,54,2)/100) * 25.4;
+
+ $hsh{'ET_Day'} = unpack("s", substr $blk,56,2)/1000;
+ $hsh{'ET_Month'} = unpack("s", substr $blk,58,2)/100;
+ $hsh{'ET_Year'} = unpack("s", substr $blk,60,2)/100;
+
+ #$hsh{'Alarms_Inside'} = unpack("b8", substr $blk,70,1);
+ #$hsh{'Alarms_Rain'} = unpack("b8", substr $blk,70,1);
+ #$hsh{'Alarms_Outside'} = unpack("b8", substr $blk,70,1);
+
+ $hsh{'Batt_Transmitter'} = unpack("C", substr $blk,86,1); # * 0.005859375
+ $hsh{'Batt_Console'} = unpack("s", substr $blk,87,2) * 0.005859375;
+
+ $hsh{'Forecast_Icon'} = unpack("C", substr $blk,89,1);
+ $hsh{'Forecast_Rule'} = unpack("C", substr $blk,90,1);
+
+ $hsh{'Sunrise'} = sprintf( "%04d", unpack("S", substr $blk,91,2) );
+ $hsh{'Sunrise'} =~ s/(\d{2})(\d{2})/$1:$2/;
+ $hsh{'Sunset'} = sprintf( "%04d", unpack("S", substr $blk,93,2) );
+ $hsh{'Sunset'} =~ s/(\d{2})(\d{2})/$1:$2/;
+
+ #my $nl = ord substr $blk,95,1;
+ #my $cr = ord substr $blk,96,1;
+
+ my $crc = unpack "%n", substr($blk,97,2);
+ my $crc_calc = CRC_CCITT($blk);
+
+ if ($crc_calc==0) {
+ return 0;
+ }
+ else {
+ print "CRC check failed for LOOP data!\n";
+ return 1;
+ }
+ #delete @hsh{'crc', 'crc_calc', 'next_rec'};
+ #delete($hsh{crc})||die"cant delete crc";
+ #delete($hsh{crc_calc})||die"cant delete crc_calc";
+ #delete($hsh{next_rec})||die"cant delete next_rec";
+
+}
+
+sub dew_point
+{
+ my $temp = shift @_;
+ my $rh = shift @_;
+
+ # Using the simplified approximation for dew point
+ # Accurate to 1 degree C for humidities > 50 %
+ # http://en.wikipedia.org/wiki/Dew_point
+
+ my $dew_point = $temp - ( (100 - $rh)/5 );
+
+ return $dew_point;
+}
+
+sub CRC_CCITT
+{
+ # Expects packed data...
+ my $data_str = shift @_;
+
+ my $crc = 0;
+ my @lst = split //, $data_str;
+ foreach my $data (@lst) {
+ my $data = unpack("c",$data);
+
+ my $crc_prev = $crc;
+ my $index = $crc >> 8 ^ $data;
+ my $lhs = $crc_table[$index];
+ #print "lhs=$lhs, crc=$crc\n";
+ my $rhs = ($crc << 8) & 0xFFFF;
+ $crc = $lhs ^ $rhs;
+
+
+ }
+
+ return $crc;
+}
+
+sub load_crc_table
+{
+
+ @crc_table = (
+ 0x0, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
+ 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
+ 0x1231, 0x210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
+ 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
+ 0x2462, 0x3443, 0x420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
+ 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
+ 0x3653, 0x2672, 0x1611, 0x630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
+ 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
+ 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x840, 0x1861, 0x2802, 0x3823,
+ 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
+ 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0xa50, 0x3a33, 0x2a12,
+ 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
+ 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0xc60, 0x1c41,
+ 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
+ 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0xe70,
+ 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
+ 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
+ 0x1080, 0xa1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
+ 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
+ 0x2b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
+ 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
+ 0x34e2, 0x24c3, 0x14a0, 0x481, 0x7466, 0x6447, 0x5424, 0x4405,
+ 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
+ 0x26d3, 0x36f2, 0x691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
+ 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
+ 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x8e1, 0x3882, 0x28a3,
+ 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
+ 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0xaf1, 0x1ad0, 0x2ab3, 0x3a92,
+ 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
+ 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0xcc1,
+ 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
+ 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0xed1, 0x1ef0
+ );
+
+ $bar_trend{-60} = "Falling Rapidly";
+ $bar_trend{196} = "Falling Rapidly";
+ $bar_trend{-20} = "Falling Slowly";
+ $bar_trend{236} = "Falling Slowly";
+ $bar_trend{0} = "Steady";
+ $bar_trend{20} = "Rising Slowly";
+ $bar_trend{60} = "Rising Rapidly";
+}
+
+sub gettime
+{
+ $ob->write("GETTIME\n");
+ $ob->read_interval(200);
+ my($cnt_in, $str) = $ob->read(9);
+ if ($cnt_in==0) {
+ dienice("read error cnt_in=$cnt_in, str='$str'");
+ }
+
+ my $ck = CRC_CCITT(substr($str,1,9));
+ if ( $ck ) {
+ warn "checksum error"; return 0;
+ }
+ my @rsp_lst = split //, $str;
+ shift @rsp_lst;
+ @rsp_lst = map ord, @rsp_lst;
+ return \@rsp_lst;
+}
+
+sub settime
+{
+ my $s_time = [ localtime() ];
+ $s_time->[4] += 1;
+
+ $ob->write("SETTIME\n");
+ $ob->read_interval(300);
+ my ($cnt_in, $str) = $ob->read(1);
+ my $ack = ord $str;
+ if ( $ack != 6 ) {
+ warn "SETTIME not set ack $ack !"; return 0;
+ }
+ my ($sec, $min, $hour, $day, $mon, $yr) = @{$s_time};
+ $str = join "", map chr, ($sec, $min, $hour, $day, $mon, $yr);
+ my $ck = CRC_CCITT($str);
+ $str = $str . pack("n",$ck);
+ $ob->write($str);
+ ($cnt_in, $str) = $ob->read(1);
+ if ( ord($str) != 6 ) {
+ warn "SETTIME not set!"; return 0;
+ }
+ sleep 3; # The console seems to need to some time here...
+}
+
+sub get_loop
+{
+ print "** get loop at ", scalar localtime, "\n";
+ my $loops=1;
+ $ob->write("LOOP $loops\n");
+ $ob->read_interval(0);
+ ($count, $result) = $ob->read(1);
+ for (my $i=0; $i<$loops; $i+=1) {
+ my $rc=loop_dump();
+ if ($rc!=0) {
+ last;
+ }
+ }
+ return;
+
+}
+
+sub loop_dump
+{
+ $ob->read_interval(0);
+ ($count, $result) = $ob->read(99);
+ if ($count != 99) {
+ print "loop error - got $count bytes, expected 99\n";
+ return 1;
+ }
+ print "LOOP data received\n";
+
+ if (ord(substr($result,0,1))==6) {
+ $result=substr($result,1);
+ }
+
+ my $rc=parse_loop_blck($result);
+ if ($rc!=0) {
+ return;
+ } # bad crc so goto next
+ foreach my $key (sort keys %hsh) {
+ print "$key = $hsh{$key}\n";
+ }
+
+ my $stmt = 'INSERT INTO current (Date_Time,' . join(',', keys %hsh) . ') VALUES (NOW(),' . join(',', ('?') x keys %hsh) . ')';
+
+ $dbh->do( $stmt, undef, values %hsh);
+
+ %hsh=();
+ return 0;
+}
+
+
+sub do_dmpaft
+{
+ #my $self = shift @_;
+ open(DMP,">dump.txt");
+ my $vDateStamp = shift @_;
+ my $vTimeStamp = shift @_;
+
+ # If not date/time stamp then assume 0 which will down load the entire archive
+ unless ( $vDateStamp ) {
+ $vDateStamp = 0;
+ }
+ unless ( $vTimeStamp ) {
+ $vTimeStamp = 0;
+ }
+
+ #my $port_obj = $self->{'port_obj'};
+
+ my $datetime = pack("ss",$vDateStamp, $vTimeStamp);
+
+ my $crc = CRC_CCITT($datetime);
+ my $cmd = pack("ssn",$vDateStamp,$vTimeStamp,$crc);
+
+ #-----------------------
+ #my $str = unpack("H*", $cmd);
+ #$str =~ s/(\w{2})/$1 /g;
+ # Documentation is wrong! The example should be <0xC6><0x06><0xA2><0x03> in section X
+ #print "cmd : $str \n";exit;
+ #-----------------------
+
+ #sleep 2; # Needed after loop
+ #$self->wake_up();
+
+ # Ok let's start the communication sequence....
+ my $cnt_out = $ob->write("DMPAFT\n");
+ unless ($cnt_out) {
+ warn "write failed\n";
+ }
+ ;
+
+ $ob->read_interval(300);
+ my ($cnt_in, $str) = $ob->read(1);
+
+ my $ack = ord $str;
+ unless ($ack == 6) {
+ warn "Ack not received on DMPAFT command: $ack"; exit -1;
+ }
+
+ $cnt_out = $ob->write($cmd);
+ unless ($cnt_out) {
+ warn "write failed\n";
+ }
+ ;
+ ($cnt_in, $str) = $ob->read(7);
+
+ $ack = ord substr($str,0,1);
+
+ my $ls = unpack("H20",substr($str,1,4) );
+ $ls =~ s/(\w{2})/$1 /g;
+
+ my $pages = unpack("s",substr($str,1,2) );
+ my $rec_start = unpack("s",substr($str,3,2) );
+
+ $crc = CRC_CCITT(substr($str,1,6) );
+
+ print "Pages = $pages : rec = $rec_start Datestamp $vDateStamp $crc\n";
+
+ $cnt_out = $ob->write( pack("h", 0x06) );
+
+ #if ($pages == 513 ) { return -1 }
+
+ my @arc_rec_lst;
+ foreach my $page (1..$pages) {
+ my $page_sz = 267;
+ $ob->read_interval(0);
+ my ($cnt_in, $str) = $ob->read($page_sz); #,3
+ printf("len=%s\n",length($str));
+ if ($cnt_in!=$page_sz) {
+ dienice("hmm, dmpaft only got $cnt_in bytes. was expecting $page_sz");
+ }
+ print "Page $page\n";
+ #print DMP $str,"\n";
+ #print "ACK receipt of page $page\n";
+ #$ob->write( pack("h", 0x06) );
+ #next;
+ my $calc_crc = CRC_CCITT($str);
+ my $crc = unpack "%n", substr($str,265,2);
+ print "page crc=$crc, calc_crc=$calc_crc\n";
+ my $rec_sz = 52;
+ my $date_prev = 0;
+ my %hsh;
+
+ foreach my $rec ( 0..4 ) {
+ if ( ($page == 1) && ($rec < $rec_start ) ) {
+ next;
+ } # Find the right starting point...
+
+ my $start_ptr = 1 + ($rec * $rec_sz );
+ my $rec_str = substr($str, $start_ptr ,52);
+
+ #print "$start_ptr \t > " . unpack( "h*", $rec_str) . "\n";
+
+ my $date = substr($rec_str,0,2);
+ my $date_curr = unpack "s", $date;
+
+ # Check if we have wrapped...
+ if ( $date_curr < $date_prev ) {
+ last;
+ }
+ $date_prev = $date_curr;
+
+ $hsh{'date_stamp'} = $date_curr;
+ $hsh{'time_stamp'} = unpack "s", substr($rec_str,2,2);
+
+ $hsh{'day'} = unpack( "c", $date & pack("c",0x1F) );
+ $hsh{'month'} = ( $hsh{'date_stamp'} >> 5) & 0xF;
+ $hsh{'year'} = ( $hsh{'date_stamp'} >> 9) + 2000;
+
+ $hsh{'hour'} = sprintf("%02d", int ( $hsh{'time_stamp'} / 100 ));
+
+ $hsh{'min'} = $hsh{'time_stamp'} - ($hsh{'hour'} * 100);
+ $hsh{'min'} = sprintf("%02d", $hsh{'min'});
+
+ $hsh{'time_stamp_fmt'} = "$hsh{'hour'}:$hsh{'min'}:00";
+ $hsh{'date_stamp_fmt'} = "$hsh{'year'}_$hsh{'month'}_$hsh{'day'}";
+
+ #$hsh{'unixtime'} = timelocal(0,$hsh{min}, $hsh{hour}, $hsh{day}, $hsh{month}-1, $hsh{year}-1900);
+
+ $hsh{'Air_Temp'} = unpack("s", substr($rec_str,4,2)) / 10;
+ $hsh{'Air_Temp_Hi'} = unpack("s", substr($rec_str,6,2)) / 10;
+ $hsh{'Air_Temp_Lo'} = unpack("s", substr($rec_str,8,2)) / 10;
+ $hsh{'Rain_Clicks'} = unpack("s", substr($rec_str,10,2));
+ $hsh{'Rain_Rate'} = unpack("s", substr($rec_str,12,2)) / 100; # Inches per hour
+ $hsh{'Barometric_Press'} = unpack("s", substr $rec_str,14,2) / 1000;
+ $hsh{'Solar'} = unpack("s", substr $rec_str,16,2); # watt/m**2
+ $hsh{'Wind_Samples'} = unpack("s", substr $rec_str,18,2);
+ $hsh{'Air_Temp_Inside'} = unpack("s", substr $rec_str,20,2) / 10;
+
+ $hsh{'Relative_Humidity_Inside'} = unpack("C", substr $rec_str,22,1);
+ $hsh{'Relative_Humidity'} = unpack("C", substr $rec_str,23,1);
+
+ $hsh{'Wind_Speed'} = unpack("C", substr($rec_str,24,1));
+ $hsh{'Wind_Gust_Max'} = unpack("C", substr($rec_str,25,1));
+ $hsh{'Wind_Dir_Max'} = unpack("C", substr($rec_str,26,1));
+ $hsh{'Wind_Dir'} = unpack("C", substr($rec_str,27,1));
+
+ $hsh{'UV'} = unpack("C", substr($rec_str,28,1)) / 10;
+ $hsh{'ET'} = unpack("C", substr($rec_str,29,1)) / 1000;
+
+ $hsh{'Solar_Max'} = unpack("s", substr($rec_str,30,2));
+ $hsh{'UV_Max'} = unpack("C", substr($rec_str,32,1));
+
+ $hsh{'Forecast_Rule'} = unpack("C", substr($rec_str,33,1));
+
+ # $hsh{'Dew_Point'} = _dew_point($hsh{'Air_Temp'},$hsh{'Relative_Humidity'});
+
+ # Miscellaneous others omitted for now
+
+ print "date> $hsh{'Air_Temp'} $hsh{'time_stamp'} $hsh{'time_stamp_fmt'} $hsh{'date_stamp'} $hsh{'date_stamp_fmt'}\n";
+ #print Dumper \%hsh;
+
+ push @arc_rec_lst, {%hsh};
+ }
+
+ #$in = <STDIN>; # Testing step through facility
+ #if ($in =~ /q/i ) { $port_obj->write( pack("h", 0x1B) ); last; }
+ #else { $port_obj->write( pack("h", 0x06) ); }
+ print "ACK receipt of page\n";
+ $ob->write( pack("h", 0x06) );
+
+ }
+ close DMP;
+}
+
+package Device::SerialPort;
+
+sub read_interval
+{
+
+}
projects / dweather.git / blobdiff