changes to contact details in manuals

[spider.git] / txt / adminmanual.txt

diff --git a/txt/adminmanual.txt b/txt/adminmanual.txt
index d0136c57f1823fcbd1273f4a8a2aacbf62ff232a..2f3a6473a36db7f376c7d85d163a0153f012abdb 100644 (file)
--- a/txt/adminmanual.txt
+++ b/txt/adminmanual.txt
@@ -1,6 +1,6 @@
   The DXSpider Administration Manual v1.49
   The DXSpider Administration Manual v1.49

-  Ian Maude, G0VGS, (ianmaude@btinternet.com)
-  November 2001 revision 1.1
+  Ian Maude, G0VGS, (g0vgs@gb7mbc.net)
+  February 2002 revision 1.3

 
   A reference for SysOps of the DXSpider DXCluster program.
   ______________________________________________________________________
 
   A reference for SysOps of the DXSpider DXCluster program.
   ______________________________________________________________________


@@ -1712,214 +1712,82 @@
 
   6.5.  The Aliases file
 
 
   6.5.  The Aliases file
 

-  You will find a file in /spider/cmd/ called Aliases.  First, copy this
-  file to /spider/local_cmd/Aliases and edit this file.  You will see
-  something like this ...
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+  You will find a file in /spider/cmd/ called Aliases.  This is the file
+  that controls what a user gets when issuing a command.  It is also
+  possible to create your own aliases for databases and files you create
+  locally.

 
 
 
 

+  You should not alter the original file in /spider/cmd/ but create a
+  new file with the same name in /spider/local_cmd.  This means that any
+  new Aliases files that is downloaded will not overwrite your self
+  created Aliases and also that you do not override any new Aliases with
+  your copy in /spider/local_cmd/.  You must remember that any files you
+  store in /spider/local/ or /spider/local_cmd override the originals if
+  the same lines are used in both files.

 
 
 
 

+  The best way of dealing with all this then is to only put your own
+  locally created Aliases in the copy in /spider/local_cmd.  The example
+  below is currently in use at GB7MBC.

 
 
 
 
 
 
 
 

+       #
+       # Local Aliases File
+       #

 
 

-  #!/usr/bin/perl
+       package CmdAlias;

 
 

-  # provide some standard aliases for commands for terminally
-  # helpless ak1a user (helpless in the sense that they never
-  # read nor understand help files)
+       %alias = (
+           'n' => [
+             '^news$', 'type news', 'type',
+           ],
+           's' => [
+             '^sh\w*/buck$', 'show/qrz', 'show',
+             '^sh\w*/hftest$', 'dbshow hftest', 'dbshow',
+             '^sh\w*/qsl$', 'dbshow qsl', 'dbshow',
+             '^sh\w*/vhf$', 'dbshow vhf', 'dbshow',
+             '^sh\w*/vhftest$', 'dbshow vhftest', 'dbshow',
+               ],
+       )

 
 

-  # This file is automagically reloaded if its modification time is
-  # later than the one stored in CmdAlias.pm

 
 

-  # PLEASE make this file consistant with reality! (the patterns MUST
-  # match the filenames!)

 
 

-  # Don't alter this file, copy it into the local_cmd tree and modify it.
-  # This file will be replaced everytime I issue a new release.

 
 

-  # You only need to put aliases in here for commands that don't work as
-  # you desire naturally, e.g sh/dx on its own just works as you expect
-  # so you need not add it as an alias.

 
 

+  Each alphabetical section should be preceded by the initial letter and
+  the section should be wrapped in square brackets as you can see.  The
+  syntax is straightforward.  The first section on each line is the new
+  command that will be allowed once the alias is included.  The second
+  section is the command it is replacing and the last section is the
+  actual command that is being used.

 
 
 
 

-  package CmdAlias;
+  The eagle-eyed amongst you will have noticed that in the first
+  section, the new alias command has a '^' at the start and a '$' at the
+  end.  Basically these force a perfect match on the alias.  The '^'
+  says match the beginning exactly and the with similar commands.

 
 

-  %alias = (
-      '?' => [
-            '^\?', 'apropos', 'apropos',
-          ],
-      'a' => [
-            '^ann.*/full', 'announce full', 'announce',
-            '^ann.*/sysop', 'announce sysop', 'announce',
-            '^ann.*/(.*)$', 'announce $1', 'announce',
-          ],
-          'b' => [
-          ],
-          'c' => [
-          ],
-          'd' => [
-            '^del', 'kill', 'kill',
-            '^del\w*/fu', 'kill full', 'kill',
-            '^di\w*/a\w*', 'directory all', 'directory',
-            '^di\w*/b\w*', 'directory bulletins', 'directory',
-            '^di\w*/n\w*', 'directory new', 'directory',
-            '^di\w*/o\w*', 'directory own', 'directory',
-            '^di\w*/s\w*', 'directory subject', 'directory',
-            '^di\w*/t\w*', 'directory to', 'directory',
-            '^di\w*/f\w*', 'directory from', 'directory',
-            '^di\w*/(\d+)', 'directory $1', 'directory',
-          ],
-          'e' => [
-          ],
-          'f' => [
-          ],
-          'g' => [
-          ],
-          'h' => [
-          ],
-          'i' => [
-          ],
-          'j' => [
-          ],
-          'k' => [
-          ],
-          'l' => [
-            '^l$', 'directory', 'directory',
-            '^ll$', 'directory', 'directory',
-            '^ll/(\d+)', 'directory $1', 'directory',
-          ],
-          'm' => [
-          ],
-          'n' => [
-            '^news', 'type news', 'type',
-          ],
-          'o' => [
-          ],
-          'p' => [
-          ],
-          'q' => [
-            '^q', 'bye', 'bye',
-          ],
-          'r' => [
-            '^r$', 'read', 'read',
-            '^rcmd/(\S+)', 'rcmd $1', 'rcmd',
-          ],
-          's' => [
-            '^s/p$', 'send', 'send',
-            '^sb$', 'send noprivate', 'send',
-            '^set/home$', 'set/homenode', 'set/homenode',
-            '^set/nobe', 'unset/beep', 'unset/beep',
-            '^set/nohe', 'unset/here', 'unset/here',
-            '^set/noan', 'unset/announce', 'unset/announce',
-            '^set/nodx', 'unset/dx', 'unset/dx',
-            '^set/nota', 'unset/talk', 'unset/talk',
-            '^set/noww', 'unset/wwv', 'unset/wwv',
-            '^set/nowx', 'unset/wx', 'unset/wx',
-            '^sh$', 'show', 'show',
-            '^sh\w*/buck', 'dbshow buck', 'dbshow',
-            '^sh\w*/bu', 'show/files bulletins', 'show/files',
-            '^sh\w*/c/n', 'show/configuration nodes', 'show/configuration',
-            '^sh\w*/c$', 'show/configuration', 'show/configuration',
-            '^sh\w*/com', 'dbavail', 'dbavail',
-            '^sh\w*/dx/(\d+)-(\d+)', 'show/dx $1-$2', 'show/dx',
-            '^sh\w*/dx/(\d+)', 'show/dx $1', 'show/dx',
-            '^sh\w*/dx/d(\d+)', 'show/dx from $1', 'show/dx',
-            '^sh\w*/email', 'dbshow email', 'dbshow',
-            '^sh\w*/hftest', 'dbshow hftest', 'dbshow',
-            '^sh\w*/vhftest', 'dbshow vhftest', 'dbshow',
-            '^sh\w*/qsl', 'dbshow qsl', 'dbshow',
-            '^sh\w*/tnc', 'who', 'who',
-            '^sh\w*/up', 'show/cluster', 'show/cluster',
-            '^sh\w*/w\w*/(\d+)-(\d+)', 'show/wwv $1-$2', 'show/wwv',
-            '^sh\w*/w\w*/(\d+)', 'show/wwv $1', 'show/wwv',
-            '^sp$', 'send', 'send',
-
-      ],
-          't' => [
-            '^ta$', 'talk', 'talk',
-            '^t$', 'talk', 'talk',
-          ],
-          'u' => [
-          ],
-          'v' => [
-          ],
-          'w' => [
-            '^wx/full', 'wx full', 'wx',
-            '^wx/sysop', 'wx sysop', 'wx',
-          ],
-          'x' => [
-          ],
-          'y' => [
-          ],
-          'z' => [
-          ],
-  )

 
 

+  I have 3 different types of alias in this file.  At the top is an
+  alias for 'news'.  This is a file I have created in the
+  /spider/packclus/ directory where I can inform users of new
+  developments or points of interest.  In it's initial form a user would
+  have to use the command type news.  The alias allows them to simply
+  type news to get the info.  Second is an alias for the show/qrz
+  command so that those users used to the original show/buck command in
+  AK1A will not get an error, and the rest of the lines are for locally
+  created databases so that a user can type show/hftest instead of
+  having to use the command dbshow hftest which is not as intuitive.

 
 
 
 

+  This file is just an example and you should edit it to your own
+  requirements.  Once created, simply issue the command load/alias at
+  the cluster prompt as the sysop user and the aliases should be
+  available.

 
 

-  You can create aliases for commands at will.  Beware though, these may
-  not always turn out as you think.  Care is needed and you need to test
-  the results once you have set an alias.

 
 
   6.6.  Console.pl
 
 
   6.6.  Console.pl


@@ -1950,9 +1818,11 @@
 
 
 
 
 
 

+

   would export message number 5467 as a file called keps.in in the
   /spider/perl directory.
 
   would export message number 5467 as a file called keps.in in the
   /spider/perl directory.
 

+

   Now login to a VT as sysop and cd /spider/perl.  There is a command in
   the perl directory called convkeps.pl.  All we need to do now is
   convert the file like so ...
   Now login to a VT as sysop and cd /spider/perl.  There is a command in
   the perl directory called convkeps.pl.  All we need to do now is
   convert the file like so ...


@@ -1964,6 +1834,7 @@
 
 
 
 
 
 

+

   Now go back to the cluster and issue the command ...
 
 
   Now go back to the cluster and issue the command ...
 
 


@@ -1973,9 +1844,9 @@
 
 
 
 
 
 

-  That is it!  the kepler data has been updated.

 
 
 
 

+  That is it!  the kepler data has been updated.

 
 
   6.8.  The QRZ callbook
 
 
   6.8.  The QRZ callbook


@@ -2040,6 +1911,7 @@
   registered users, use the command show/register.
 
 
   registered users, use the command show/register.
 
 

+

   7.2.  Passwords
 
   At the moment, passwords only affect users who login to a DXSpider
   7.2.  Passwords
 
   At the moment, passwords only affect users who login to a DXSpider


@@ -2106,10 +1978,10 @@
   CVS repository and then update your Spider source.  There are several
   steps which are listed below ...
 
   CVS repository and then update your Spider source.  There are several
   steps which are listed below ...
 

-

   First login as the user sysop.  Next you need to connect to the CVS
   repository.  You do this with the command below ...
 
   First login as the user sysop.  Next you need to connect to the CVS
   repository.  You do this with the command below ...
 

+

   cvs -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/dxspider login
 
 
   cvs -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/dxspider login
 
 


@@ -2238,9 +2110,9 @@
          dest <prefixes>          eg: 6MUK,WDX      (distros)
 
 
          dest <prefixes>          eg: 6MUK,WDX      (distros)
 
 

+  some examples:-

 
 
 
 

-  some examples:-

 
          acc/ann dest 6MUK
          acc/ann 2 by_zone 14,15,16
 
          acc/ann dest 6MUK
          acc/ann 2 by_zone 14,15,16


@@ -2304,10 +2176,10 @@
   more info. Please read this to understand how filters work - it will
   save a lot of grief later on.
 
   more info. Please read this to understand how filters work - it will
   save a lot of grief later on.
 

-

   You can use any of the following things in this line:-
 
 
   You can use any of the following things in this line:-
 
 

+

          call <prefixes>        the callsign of the thingy
          call_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
          call_itu <numbers>
          call <prefixes>        the callsign of the thingy
          call_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
          call_itu <numbers>


@@ -2344,7 +2216,7 @@
 
   9.4.  accept/spots (0)
 
 
   9.4.  accept/spots (0)
 

-  accept/announce [0-9] <pattern> Set an accept filter line for spots
+  accept/spots [0-9] <pattern> Set an accept filter line for spots

 
 
   Create an 'accept this spot' line for a filter.
 
 
   Create an 'accept this spot' line for a filter.


@@ -2358,19 +2230,33 @@
 
 
 
 
 
 

-         freq <range>           eg: 0/30000 or hf or hf/cw or 6m,4m,2m
-         on <range>             same as 'freq'
-         call <prefixes>        eg: G,PA,HB9
-         info <string>          eg: iota or qsl
-         by <prefixes>
-         call_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
-         call_itu <numbers>
-         call_zone <numbers>
-         by_dxcc <numbers>
-         by_itu <numbers>
-         by_zone <numbers>
-         origin <prefixes>
-         channel <prefixes>
+
+
+
+
+
+
+
+
+
+
+
+
+    freq <range>           eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+    on <range>             same as 'freq'
+    call <prefixes>        eg: G,PA,HB9
+    info <string>          eg: iota or qsl
+    by <prefixes>
+    call_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+    call_itu <numbers>
+    call_zone <numbers>
+    by_dxcc <numbers>
+    by_itu <numbers>
+    by_zone <numbers>
+    origin <prefixes>
+    channel <prefixes>
+
+

 
 
 
 
 
 


@@ -2432,23 +2318,15 @@
 
 
 
 
 
 

-
-
-
-
-
-
-
-
-    by <prefixes>            eg: G,M,2
-    origin <prefixes>
-    origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
-    origin_itu <numbers>
-    origin_zone <numbers>
-    by_dxcc <numbers>
-    by_itu <numbers>
-    by_zone <numbers>
-    channel <prefixes>
+         by <prefixes>            eg: G,M,2
+         origin <prefixes>
+         origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+         origin_itu <numbers>
+         origin_zone <numbers>
+         by_dxcc <numbers>
+         by_itu <numbers>
+         by_zone <numbers>
+         channel <prefixes>

 
 
 
 
 
 


@@ -2490,15 +2368,21 @@
 
 
 
 
 
 

-         by <prefixes>            eg: G,M,2
-         origin <prefixes>
-         origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
-         origin_itu <numbers>
-         origin_zone <numbers>
-         by_dxcc <numbers>
-         by_itu <numbers>
-         by_zone <numbers>
-         channel <prefixes>
+
+
+
+
+
+
+    by <prefixes>            eg: G,M,2
+    origin <prefixes>
+    origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+    origin_itu <numbers>
+    origin_zone <numbers>
+    by_dxcc <numbers>
+    by_itu <numbers>
+    by_zone <numbers>
+    channel <prefixes>

 
 
 
 
 
 


@@ -2506,6 +2390,7 @@
   for example
 
 
   for example
 
 

+

          accept/wwv by_zone 4
 
 
          accept/wwv by_zone 4
 
 


@@ -2555,9 +2440,6 @@
 
   This command will send your announcement across the whole cluster
   network.
 
   This command will send your announcement across the whole cluster
   network.

-
-
-

   9.12.  announce sysop (5)
 
   announce sysop <text>
   9.12.  announce sysop (5)
 
   announce sysop <text>


@@ -2571,7 +2453,6 @@
   apropos <string> Search the help database
 
 
   apropos <string> Search the help database
 
 

-

   Search the help database for <string> (it isn't case sensitive), and
   print the names of all the commands that may be relevant.
 
   Search the help database for <string> (it isn't case sensitive), and
   print the names of all the commands that may be relevant.
 


@@ -2637,7 +2518,6 @@
   This command allows you to clear (remove) a line in a route filter or
   to remove the whole filter.
 
   This command allows you to clear (remove) a line in a route filter or
   to remove the whole filter.
 

-

   see CLEAR/SPOTS for a more detailed explanation.
 
   A sysop can clear an input or normal output filter for a user or the
   see CLEAR/SPOTS for a more detailed explanation.
 
   A sysop can clear an input or normal output filter for a user or the


@@ -2701,9 +2581,6 @@
   node_default or user_default.
 
 
   node_default or user_default.
 
 

-
-
-

   9.20.  clear/wcy (0)
 
   clear/wcy [1|all] Clear a WCY filter line
   9.20.  clear/wcy (0)
 
   clear/wcy [1|all] Clear a WCY filter line


@@ -2826,6 +2703,7 @@
 
   to allow
 
 
   to allow
 

+

   SH/BUCK g1tlh
 
   to work as they may be used to.
   SH/BUCK g1tlh
 
   to work as they may be used to.


@@ -2834,8 +2712,6 @@
   databases.  See DBSHOW for generic database enquiry
 
 
   databases.  See DBSHOW for generic database enquiry
 
 

-
-

   9.27.  dbimport (9)
 
   dbimport <dbname> Import AK1A data into a database
   9.27.  dbimport (9)
 
   dbimport <dbname> Import AK1A data into a database


@@ -2894,11 +2770,10 @@
 
   but if he hasn't and the database really does exist (use DBAVAIL or
   SHOW/COMMAND to find out) you can do the same thing with:
 
   but if he hasn't and the database really does exist (use DBAVAIL or
   SHOW/COMMAND to find out) you can do the same thing with:

+         DBSHOW buck G1TLH

 
 
 
 
 
 

-         DBSHOW buck G1TLH
-

 
 
 
 
 
 


@@ -2959,15 +2834,20 @@
 
 
 
 
 
 

-          DIR TO G1TLH 5
-       or
-          DIR SUBJECT IOTA 200-250
+
+
+     DIR TO G1TLH 5
+  or
+     DIR SUBJECT IOTA 200-250

 
 
 
 
   You can abbreviate all the commands to one letter and use ak1a
   syntax:-
 
 
 
 
   You can abbreviate all the commands to one letter and use ak1a
   syntax:-

+
+
+

           DIR/T G1* 10
           DIR/S QSL 10-100 5
 
           DIR/T G1* 10
           DIR/S QSL 10-100 5
 


@@ -3021,7 +2901,8 @@
 
 
 
 
 
 

-          DX by G1TLH FR0G 144.600 he isn't on the cluster
+
+     DX by G1TLH FR0G 144.600 he isn't on the cluster

 
 
 
 
 
 


@@ -3034,6 +2915,7 @@
 
   export <msgno> <filename> Export a message to a file
 
 
   export <msgno> <filename> Export a message to a file
 

+

   Export a message to a file. This command can only be executed on a
   local console with a fully privileged user. The file produced will be
   in a form ready to be imported back into the cluster by placing it in
   Export a message to a file. This command can only be executed on a
   local console with a fully privileged user. The file produced will be
   in a form ready to be imported back into the cluster by placing it in


@@ -3165,7 +3047,6 @@
 
   clear/spots 1
 
 
   clear/spots 1
 

-

   To remove the filter in its entirty:-
 
   clear/spots all
   To remove the filter in its entirty:-
 
   clear/spots all


@@ -3283,6 +3164,8 @@
   same subject will be deleted. Beware!
 
 
   same subject will be deleted. Beware!
 
 

+
+

   9.46.  kill/expunge (6)
 
   kill/expunge <msgno> [<msgno>..]Expunge a message
   9.46.  kill/expunge (6)
 
   kill/expunge <msgno> [<msgno>..]Expunge a message


@@ -3298,6 +3181,7 @@
   It otherwise is used in the same way as the KILL command.
 
 
   It otherwise is used in the same way as the KILL command.
 
 

+

   9.47.  links (0)
 
   links Show which nodes are physically connected
   9.47.  links (0)
 
   links Show which nodes are physically connected


@@ -3348,7 +3232,6 @@
 
   load/bands Reload the band limits table
 
 
   load/bands Reload the band limits table
 

-

   Reload the /spider/data/bands.pl file if you have changed it manually
   whilst the cluster is running.
 
   Reload the /spider/data/bands.pl file if you have changed it manually
   whilst the cluster is running.
 


@@ -3364,6 +3247,8 @@
   delete a command in the local_cmd tree and want to use the normal one
   again. Execute this command to reset everything back to the state it
   was just after a cluster restart.
   delete a command in the local_cmd tree and want to use the normal one
   again. Execute this command to reset everything back to the state it
   was just after a cluster restart.

+
+

   9.53.  load/forward (9)
 
   load/forward Reload the msg forwarding routing table
   9.53.  load/forward (9)
 
   load/forward Reload the msg forwarding routing table


@@ -3413,37 +3298,26 @@
 
   msg <cmd> <msgno> [data ...] Alter various message parameters
 
 
   msg <cmd> <msgno> [data ...] Alter various message parameters
 

-

   Alter message parameters like To, From, Subject, whether private or
   bulletin or return receipt (RR) is required or whether to keep this
   message from timing out.
 
 
 
   Alter message parameters like To, From, Subject, whether private or
   bulletin or return receipt (RR) is required or whether to keep this
   message from timing out.
 
 
 

-
-
-
-
-
-
-
-
-
-
-    MSG TO <msgno> <call>     - change TO callsign to <call>
-    MSG FRom <msgno> <call>   - change FROM callsign to <call>
-    MSG PRrivate <msgno>      - set private flag
-    MSG NOPRrivate <msgno>    - unset private flag
-    MSG RR <msgno>            - set RR flag
-    MSG NORR <msgno>          - unset RR flag
-    MSG KEep <msgno>          - set the keep flag (message won't be deleted ever)
-    MSG NOKEep <msgno>        - unset the keep flag
-    MSG SUbject <msgno> <new> - change the subject to <new>
-    MSG WAittime <msgno>      - remove any waitting time for this message
-    MSG NOREad <msgno>        - mark message as unread
-    MSG REad <msgno>          - mark message as read
-    MSG QUeue                 - queue any outstanding bulletins
-    MSG QUeue 1               - queue any outstanding private messages
+         MSG TO <msgno> <call>     - change TO callsign to <call>
+         MSG FRom <msgno> <call>   - change FROM callsign to <call>
+         MSG PRrivate <msgno>      - set private flag
+         MSG NOPRrivate <msgno>    - unset private flag
+         MSG RR <msgno>            - set RR flag
+         MSG NORR <msgno>          - unset RR flag
+         MSG KEep <msgno>          - set the keep flag (message won't be deleted ever)
+         MSG NOKEep <msgno>        - unset the keep flag
+         MSG SUbject <msgno> <new> - change the subject to <new>
+         MSG WAittime <msgno>      - remove any waitting time for this message
+         MSG NOREad <msgno>        - mark message as unread
+         MSG REad <msgno>          - mark message as read
+         MSG QUeue                 - queue any outstanding bulletins
+         MSG QUeue 1               - queue any outstanding private messages

 
 
 
 
 
 


@@ -3487,6 +3361,9 @@
 
 
 
 
 
 

+
+
+

   9.60.  rcmd (1)
 
   rcmd <node call> <cmd> Send a command to another DX cluster
   9.60.  rcmd (1)
 
   rcmd <node call> <cmd> Send a command to another DX cluster


@@ -3495,7 +3372,6 @@
   This command allows you to send nearly any command to another DX
   Cluster node that is connected to the system.
 
   This command allows you to send nearly any command to another DX
   Cluster node that is connected to the system.
 

-

   Whether you get any output is dependant on a) whether the other system
   knows that the node callsign of this cluster is in fact a node b)
   whether the other system is allowing RCMDs from this node and c)
   Whether you get any output is dependant on a) whether the other system
   knows that the node callsign of this cluster is in fact a node b)
   whether the other system is allowing RCMDs from this node and c)


@@ -3553,6 +3429,7 @@
 
 
 
 
 
 

+

   some examples:-
 
 
   some examples:-
 
 


@@ -3619,16 +3496,11 @@
          origin_itu <numbers>
          origin_zone <numbers>
 
          origin_itu <numbers>
          origin_zone <numbers>
 

-
-
-
-

   some examples:-
 
 
 
   some examples:-
 
 
 

-
-    rej/route gb7djk call_dxcc 61,38 (everything except  UK+EIRE nodes)
+         rej/route gb7djk call_dxcc 61,38 (everything except  UK+EIRE nodes)

 
 
 
 
 
 


@@ -3690,10 +3562,6 @@
          rej/spot 1 on hf
          rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
 
          rej/spot 1 on hf
          rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
 

-
-
-
-

   You can use the tag 'all' to reject everything eg:
 
 
   You can use the tag 'all' to reject everything eg: