-
-<H2><A NAME="ss11.1">11.1</A> <A HREF="usermanual_en.html#toc11.1">accept</A>
-</H2>
-
-<P><CODE><B>accept</B> Set a filter to accept something</CODE></P>
-
-<P>Create a filter to accept something</P>
-<P>There are 2 types of filter, accept and reject. See HELP FILTERING for more
-info.</P>
-<H2><A NAME="ss11.2">11.2</A> <A HREF="usermanual_en.html#toc11.2">accept/announce [0-9] <pattern></A>
-</H2>
-
-<P><CODE><B>accept/announce [0-9] <pattern></B> Set an 'accept' filter line for announce</CODE></P>
-
-<P>Create an 'accept this announce' line for a filter. </P>
-<P>An accept filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERING for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.</P>
-<P>You can use any of the following things in this line:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <prefixes or numbers> or: G,GM,GW
- origin_zone <prefixes or numbers>
- origin_state <states> eg: VA,NH,RI,NH
- by_dxcc <prefixes or numbers>
- by_itu <prefixes or numbers>
- by_zone <prefixes or numbers>
- by_state <states>
- channel <prefixes>
- wx 1 filter WX announces
- dest <prefixes> eg: 6MUK,WDX (distros)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>some examples:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann dest 6MUK
- acc/ann 2 by_zone 14,15,16
- (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-
-or
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>for american states</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann by_state va,nh,ri,nh
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can use the tag 'all' to accept everything eg:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but this probably for advanced users...</P>
-<H2><A NAME="ss11.3">11.3</A> <A HREF="usermanual_en.html#toc11.3">accept/spots [0-9] <pattern></A>
-</H2>
-
-<P><CODE><B>accept/spots [0-9] <pattern></B> Set an 'accept' filter line for spots</CODE></P>
-
-<P>Create an 'accept this spot' line for a filter. </P>
-<P>An accept filter line means that if the spot matches this filter it is
-passed onto the user. See HELP FILTERING for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.</P>
-<P>You can use any of the following things in this line:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <prefixes or numbers> or: G,GM,GW
- call_zone <prefixes or numbers>
- call_state <states> eg: VA,NH,RI,ME
- by_dxcc <prefixes or numbers>
- by_itu <prefixes or numbers>
- by_zone <prefixes or numbers>
- by_state <states> eg: VA,NH,RI,ME
- origin <prefixes>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>'call' means the callsign that has spotted 'by' whoever.</P>
-<P>For frequencies, you can use any of the band names defined in
-SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
-thus: hf/ssb. You can also just have a simple range like: 0/30000 -
-this is more efficient than saying simply: freq HF (but don't get
-too hung up about that)</P>
-<P>some examples:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can use the tag 'all' to accept everything, eg:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 3 all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>for US states </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spots by_state VA,NH,RI,MA,ME
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but this probably for advanced users...</P>
-<H2><A NAME="ss11.4">11.4</A> <A HREF="usermanual_en.html#toc11.4">accept/wcy [0-9] <pattern></A>
-</H2>
-
-<P><CODE><B>accept/wcy [0-9] <pattern></B> set an 'accept' WCY filter</CODE></P>
-
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <prefixes or numbers> or: G,GM,GW
- origin_zone <prefixes or numbers>
- by_dxcc <prefixes or numbers>
- by_itu <prefixes or numbers>
- by_zone <prefixes or numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>There are no examples because WCY Broadcasts only come from one place and
-you either want them or not (see UNSET/WCY if you don't want them).</P>
-<P>This command is really provided for future use.</P>
-<P>See HELP FILTER for information.</P>
-<H2><A NAME="ss11.5">11.5</A> <A HREF="usermanual_en.html#toc11.5">accept/wwv [0-9] <pattern></A>
-</H2>
-
-<P><CODE><B>accept/wwv [0-9] <pattern></B> set an 'accept' WWV filter</CODE></P>
-
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <prefixes or numbers> or: G,GM,GW
- origin_zone <prefixes or numbers>
- by_dxcc <prefixes or numbers>
- by_itu <prefixes or numbers>
- by_zone <prefixes or numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>for example </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/wwv by_zone 4
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>is probably the only useful thing to do (which will only show WWV broadcasts
-by stations in the US).</P>
-<P>See HELP FILTER for information.</P>
-<H2><A NAME="ss11.6">11.6</A> <A HREF="usermanual_en.html#toc11.6">announce <text></A>
-</H2>
-
-<P><CODE><B>announce <text></B> Send an announcement to LOCAL users only</CODE></P>
-
-<P><text> is the text of the announcement you wish to broadcast </P>
-<H2><A NAME="ss11.7">11.7</A> <A HREF="usermanual_en.html#toc11.7">announce full <text></A>
-</H2>
-
-<P><CODE><B>announce full <text></B> Send an announcement cluster wide</CODE></P>
-
-<P>This will send your announcement cluster wide</P>
-<H2><A NAME="ss11.8">11.8</A> <A HREF="usermanual_en.html#toc11.8">apropos <string></A>
-</H2>
-
-<P><CODE><B>apropos <string></B> Search help database for <string></CODE></P>
-
-<P>Search the help database for <string> (it isn't case sensitive), and print
-the names of all the commands that may be relevant.</P>
-<H2><A NAME="ss11.9">11.9</A> <A HREF="usermanual_en.html#toc11.9">blank [<string>] [<nn>]</A>
-</H2>
-
-<P><CODE><B>blank [<string>] [<nn>]</B> Print nn (default 1) blank lines (or strings)</CODE></P>
-
-<P>In its basic form this command prints one or more blank lines. However if
-you pass it a string it will replicate the string for the width of the
-screen (default 80) and then print that one or more times, so:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- blank 2
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>prints two blank lines</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- blank -
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>prints a row of - characters once.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- blank abc
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>prints 'abcabcabcabcabcabc....'</P>
-<P>This is really only of any use in a script file and you can print a maximum
-of 9 lines.</P>
-<H2><A NAME="ss11.10">11.10</A> <A HREF="usermanual_en.html#toc11.10">bye</A>
-</H2>
-
-<P><CODE><B>bye</B> Exit from the cluster</CODE></P>
-
-<P>This will disconnect you from the cluster</P>
-<H2><A NAME="ss11.11">11.11</A> <A HREF="usermanual_en.html#toc11.11">chat <group> <text></A>
-</H2>
-
-<P><CODE><B>chat <group> <text></B> Chat or Conference to a group</CODE></P>
-
-<P>It is now possible to JOIN a group and have network wide conferencing to that
-group. DXSpider does not (and probably will not) implement the AK1A
-conference mode as this seems very limiting, is hardly used and doesn't seem
-to work too well anyway.</P>
-<P>This system uses the existing ANN system and is compatible with both other
-DXSpider nodes and AK1A clusters (they use ANN/<group>). </P>
-<P>You can be a member of as many "groups" as you want. To join a group type:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- JOIN FOC (where FOC is the group name)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>To leave a group type:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- LEAVE FOC
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can see which groups you are in by typing:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- STAT/USER
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>and you can see whether your mate is in the group, if he connects to the
-same node as you, by typing:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- STAT/USER g1tlh
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>To send a message to a group type:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- CHAT FOC hello everyone
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>or</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- CH #9000 hello I am back
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>See also JOIN, LEAVE, SHOW/CHAT</P>
-<H2><A NAME="ss11.12">11.12</A> <A HREF="usermanual_en.html#toc11.12">clear/announce [1|all]</A>
-</H2>
-
-<P><CODE><B>clear/announce [1|all]</B> Clear a announce filter line</CODE></P>
-
-<P>This command allows you to clear (remove) a line in a annouce filter or to
-remove the whole filter.</P>
-<P>see CLEAR/SPOTS for a more detailed explanation.</P>
-<H2><A NAME="ss11.13">11.13</A> <A HREF="usermanual_en.html#toc11.13">clear/route [1|all]</A>
-</H2>
-
-<P><CODE><B>clear/route [1|all]</B> Clear a route filter line</CODE></P>
-
-<P>This command allows you to clear (remove) a line in a route filter or to
-remove the whole filter.</P>
-<P>see CLEAR/SPOTS for a more detailed explanation.</P>
-<H2><A NAME="ss11.14">11.14</A> <A HREF="usermanual_en.html#toc11.14">clear/spots [0-9|all]</A>
-</H2>
-
-<P><CODE><B>clear/spots [0-9|all]</B> Clear a spot filter line</CODE></P>
-
-<P>This command allows you to clear (remove) a line in a spot filter or to
-remove the whole filter.</P>
-<P>If you have a filter:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>and you say:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/spot 1
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>you will be left with:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>If you do:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/spot all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>the filter will be completely removed.</P>
-<H2><A NAME="ss11.15">11.15</A> <A HREF="usermanual_en.html#toc11.15">clear/wcy [1|all]</A>
-</H2>
-
-<P><CODE><B>clear/wcy [1|all]</B> Clear a WCY filter line</CODE></P>
-
-<P>This command allows you to clear (remove) a line in a WCY filter or to
-remove the whole filter.</P>
-<P>see CLEAR/SPOTS for a more detailed explanation.</P>
-<H2><A NAME="ss11.16">11.16</A> <A HREF="usermanual_en.html#toc11.16">clear/wwv [1|all]</A>
-</H2>
-
-<P><CODE><B>clear/wwv [1|all]</B> Clear a WWV filter line</CODE></P>
-
-<P>This command allows you to clear (remove) a line in a WWV filter or to
-remove the whole filter.</P>
-<P>see CLEAR/SPOTS for a more detailed explanation.</P>
-<H2><A NAME="ss11.17">11.17</A> <A HREF="usermanual_en.html#toc11.17">dbavail</A>
-</H2>
-
-<P><CODE><B>dbavail</B> Show a list of all the Databases in the system</CODE></P>
-
-<P>Title says it all really, this command lists all the databases defined
-in the system. It is also aliased to SHOW/COMMAND.</P>
-<H2><A NAME="ss11.18">11.18</A> <A HREF="usermanual_en.html#toc11.18">dbshow <dbname> <key></A>
-</H2>
-
-<P><CODE><B>dbshow <dbname> <key></B> Display an entry, if it exists, in a database</CODE></P>
-
-<P>This is the generic user interface to the database to the database system.
-It is expected that the sysop will add an entry to the local Aliases file
-so that users can use the more familiar AK1A style of enquiry such as:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/BUCK G1TLH
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but if he hasn't and the database really does exist (use DBAVAIL or
-SHOW/COMMAND to find out) you can do the same thing with:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DBSHOW buck G1TLH
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.19">11.19</A> <A HREF="usermanual_en.html#toc11.19">directory</A>
-</H2>
-
-<P><CODE><B>directory</B> List messages </CODE></P>
-
-
-<H2><A NAME="ss11.20">11.20</A> <A HREF="usermanual_en.html#toc11.20">directory <from>-<to></A>
-</H2>
-
-<P><CODE><B>directory <from>-<to></B> List messages <from> message <to> message </CODE></P>
-
-<P>List the messages in the messages directory.</P>
-<P>If there is a 'p' one space after the message number then it is a
-personal message. If there is a '-' between the message number and the
-'p' then this indicates that the message has been read.</P>
-<P>You can use shell escape characters such as '*' and '?' in the <call>
-fields.</P>
-<P>You can combine some of the various directory commands together eg:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DIR TO G1TLH 5
-</PRE>
-</CODE></BLOCKQUOTE>
-
-or
-<BLOCKQUOTE><CODE>
-<PRE>
- DIR SUBJECT IOTA 200-250
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can abbreviate all the commands to one letter and use ak1a syntax:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DIR/T G1* 10
- DIR/S QSL 10-100 5
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.21">11.21</A> <A HREF="usermanual_en.html#toc11.21">directory <nn></A>
-</H2>
-
-<P><CODE><B>directory <nn></B> List last <nn> messages</CODE></P>
-
-
-<H2><A NAME="ss11.22">11.22</A> <A HREF="usermanual_en.html#toc11.22">directory all</A>
-</H2>
-
-<P><CODE><B>directory all</B> List all messages</CODE></P>
-
-
-<H2><A NAME="ss11.23">11.23</A> <A HREF="usermanual_en.html#toc11.23">directory from <call></A>
-</H2>
-
-<P><CODE><B>directory from <call></B> List all messages from <call></CODE></P>
-
-
-<H2><A NAME="ss11.24">11.24</A> <A HREF="usermanual_en.html#toc11.24">directory new</A>
-</H2>
-
-<P><CODE><B>directory new</B> List all new messages</CODE></P>
-
-
-<H2><A NAME="ss11.25">11.25</A> <A HREF="usermanual_en.html#toc11.25">directory own</A>
-</H2>
-
-<P><CODE><B>directory own</B> List your own messages</CODE></P>
-
-
-<H2><A NAME="ss11.26">11.26</A> <A HREF="usermanual_en.html#toc11.26">directory subject <string></A>
-</H2>
-
-<P><CODE><B>directory subject <string></B> List all messages with <string> in subject</CODE></P>
-
-
-<H2><A NAME="ss11.27">11.27</A> <A HREF="usermanual_en.html#toc11.27">directory to <call></A>
-</H2>
-
-<P><CODE><B>directory to <call></B> List all messages to <call></CODE></P>
-
-
-<H2><A NAME="ss11.28">11.28</A> <A HREF="usermanual_en.html#toc11.28">dx [by <call>] <freq> <call> <remarks></A>
-</H2>
-
-<P><CODE><B>dx [by <call>] <freq> <call> <remarks></B> Send a DX spot</CODE></P>
-
-<P>This is how you send a DX Spot to other users. You can, in fact, now
-enter the <freq> and the <call> either way round. </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DX FR0G 144.600
- DX 144.600 FR0G
- DX 144600 FR0G
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>will all give the same result. You can add some remarks to the end
-of the command and they will be added to the spot.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DX FR0G 144600 this is a test
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can credit someone else by saying:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DX by G1TLH FR0G 144.600 he isn't on the cluster
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>The <freq> is compared against the available bands set up in the
-cluster. See SHOW/BANDS for more information.</P>
-<H2><A NAME="ss11.29">11.29</A> <A HREF="usermanual_en.html#toc11.29">echo <line></A>
-</H2>
-
-<P><CODE><B>echo <line></B> Echo the line to the output</CODE></P>
-
-<P>This command is useful in scripts and so forth for printing the
-line that you give to the command to the output. You can use this
-in user_default scripts and the SAVE command for titling and so forth</P>
-<P>The script will interpret certain standard "escape" sequences as follows:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- \t - becomes a TAB character (0x09 in ascii)
- \a - becomes a BEEP character (0x07 in ascii)
- \n - prints a new line
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>So the following example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- echo GB7DJK is a dxcluster
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>produces:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- GB7DJK is a dxcluster
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>on the output. You don't need a \n on the end of the line you want to send.</P>
-<P>A more complex example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- echo GB7DJK\n\tg1tlh\tDirk\n\tg3xvf\tRichard
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>produces:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- GB7DJK
- g1tlh Dirk
- g3xvf Richard
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>on the output.</P>
-
-<H2><A NAME="ss11.30">11.30</A> <A HREF="usermanual_en.html#toc11.30">filtering...</A>
-</H2>
-
-<P><CODE><B>filtering...</B> Filtering things in DXSpider</CODE></P>
-
-<P>There are a number of things you can filter in the DXSpider system. They
-all use the same general mechanism.</P>
-<P>In general terms you can create a 'reject' or an 'accept' filter which
-can have up to 10 lines in it. You do this using, for example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/spots .....
- reject/spots .....
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>where ..... are the specific commands for that type of filter. There
-are filters for spots, wwv, announce, wcy and (for sysops)
-connects. See each different accept or reject command reference for
-more details.</P>
-<P>There is also a command to clear out one or more lines in a filter and
-one to show you what you have set. They are:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/spots 1
- clear/spots all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>and </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- show/filter
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>There is clear/xxxx command for each type of filter.</P>
-<P>For now we are going to use spots for the examples, but you can apply
-the principles to all types of filter.</P>
-<P>There are two main types of filter 'accept' or 'reject'; which you use
-depends entirely on how you look at the world and what is least
-writing to achieve what you want. Each filter has 10 lines (of any
-length) which are tried in order. If a line matches then the action
-you have specified is taken (ie reject means ignore it and accept
-means gimme it).</P>
-<P>The important thing to remember is that if you specify a 'reject'
-filter (all the lines in it say 'reject/spots' (for instance)) then if
-a spot comes in that doesn't match any of the lines then you will get
-it BUT if you specify an 'accept' filter then any spots that don't
-match are dumped. For example if I have a one line accept filter:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/spots on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>then automatically you will ONLY get VHF spots from or to CQ zones 14
-15 and 16. If you set a reject filter like:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/spots on hf/cw
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>Then you will get everything EXCEPT HF CW spots, If you am interested in IOTA
-and will work it even on CW then you could say:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/spots on hf/cw and not info iota
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>But in that case you might only be interested in iota and say:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/spots not on hf/cw or info iota
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>which is exactly the same. You should choose one or the other until
-you are confortable with the way it works. Yes, you can mix them
-(actually you can have an accept AND a reject on the same line) but
-don't try this at home until you can analyse the results that you get
-without ringing up the sysop for help.</P>
-<P>Another useful addition now is filtering by US state</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/spots by_state VA,NH,RI,ME
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can arrange your filter lines into logical units, either for your
-own understanding or simply convenience. I have one set frequently:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/spots 1 on hf/cw
- reject/spots 2 on 50000/1400000 not (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>What this does is to ignore all HF CW spots (being a class B I can't
-read any CW and couldn't possibly be interested in HF :-) and also
-rejects any spots on VHF which don't either originate or spot someone
-in Europe.</P>
-<P>This is an exmaple where you would use the line number (1 and 2 in
-this case), if you leave the digit out, the system assumes '1'. Digits
-'0'-'9' are available.</P>
-<P>You can leave the word 'and' out if you want, it is implied. You can
-use any number of brackets to make the 'expression' as you want
-it. There are things called precedence rules working here which mean
-that you will NEED brackets in a situation like line 2 because,
-without it, will assume:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- (on 50000/1400000 and by_zone 14,15,16) or call_zone 14,15,16
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>annoying, but that is the way it is. If you use OR - use
-brackets. Whilst we are here CASE is not important. 'And BY_Zone' is
-just 'and by_zone'.</P>
-<P>If you want to alter your filter you can just redefine one or more
-lines of it or clear out one line. For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/spots 1 on hf/ssb
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>or </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/spots 1
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>To remove the filter in its entirty:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/spots all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>There are similar CLEAR commands for the other filters:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/announce
- clear/wcy
- clear/wwv
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>ADVANCED USERS:-</P>
-<P>Once you are happy with the results you get, you may like to experiment. </P>
-<P>my example that filters hf/cw spots and accepts vhf/uhf spots from EU
-can be written with a mixed filter, eg:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/spot on hf/cw
- acc/spot on 0/30000
- acc/spot 2 on 50000/1400000 and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>each filter slot actually has a 'reject' slot and an 'accept'
-slot. The reject slot is executed BEFORE the accept slot.</P>
-<P>It was mentioned earlier that after a reject test that doesn't match,
-the default for following tests is 'accept', the reverse is true for
-'accept'. In the example what happens is that the reject is executed
-first, any non hf/cw spot is passed to the accept line, which lets
-thru everything else on HF.</P>
-<P>The next filter line lets through just VHF/UHF spots from EU.</P>
-<H2><A NAME="ss11.31">11.31</A> <A HREF="usermanual_en.html#toc11.31">help</A>
-</H2>
-
-<P><CODE><B>help</B> The HELP Command</CODE></P>
-
-<P>HELP is available for a number of commands. The syntax is:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- HELP <cmd>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>Where <cmd> is the name of the command you want help on.</P>
-<P>All commands can be abbreviated, so SHOW/DX can be abbreviated
-to SH/DX, ANNOUNCE can be shortened to AN and so on.</P>
-<P>Look at the APROPOS <string> command which will search the help database
-for the <string> you specify and give you a list of likely commands
-to look at with HELP.</P>
-<H2><A NAME="ss11.32">11.32</A> <A HREF="usermanual_en.html#toc11.32">join <group></A>
-</H2>
-
-<P><CODE><B>join <group></B> Join a chat or conference group</CODE></P>
-
-<P>JOIN allows you to join a network wide conference group. To join a
-group (called FOC in this case) type:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- JOIN FOC
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>See also CHAT, LEAVE, SHOW/CHAT</P>
-<H2><A NAME="ss11.33">11.33</A> <A HREF="usermanual_en.html#toc11.33">kill <from msgno>-<to msgno></A>
-</H2>
-
-<P><CODE><B>kill <from msgno>-<to msgno></B> Delete a range of messages</CODE></P>
-
-
-<H2><A NAME="ss11.34">11.34</A> <A HREF="usermanual_en.html#toc11.34">kill <msgno> [<msgno..]</A>
-</H2>
-
-<P><CODE><B>kill <msgno> [<msgno..]</B> Delete a message from the local system</CODE></P>
-
-
-<H2><A NAME="ss11.35">11.35</A> <A HREF="usermanual_en.html#toc11.35">kill <msgno> [<msgno> ...]</A>
-</H2>
-
-<P><CODE><B>kill <msgno> [<msgno> ...]</B> Remove or erase a message from the system</CODE></P>
-
-<P>You can get rid of any message to or originating from your callsign using
-this command. You can remove more than one message at a time.</P>
-<H2><A NAME="ss11.36">11.36</A> <A HREF="usermanual_en.html#toc11.36">kill from <regex></A>
-</H2>
-
-<P><CODE><B>kill from <regex></B> Delete messages FROM a callsign or pattern</CODE></P>
-
-
-<H2><A NAME="ss11.37">11.37</A> <A HREF="usermanual_en.html#toc11.37">kill to <regex></A>
-</H2>
-
-<P><CODE><B>kill to <regex></B> Delete messages TO a callsign or pattern</CODE></P>
-
-
-<H2><A NAME="ss11.38">11.38</A> <A HREF="usermanual_en.html#toc11.38">leave <group></A>
-</H2>
-
-<P><CODE><B>leave <group></B> Leave a chat or conference group</CODE></P>
-
-<P>LEAVE allows you to leave a network wide conference group. To leave a
-group (called FOC in this case) type:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- LEAVE FOC
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>See also CHAT, JOIN, SHOW/CHAT</P>
-<H2><A NAME="ss11.39">11.39</A> <A HREF="usermanual_en.html#toc11.39">links</A>
-</H2>
-
-<P><CODE><B>links</B> Show which nodes is physically connected</CODE></P>
-
-<P>This is a quick listing that shows which links are connected and
-some information about them. See WHO for a list of all connections.</P>
-<H2><A NAME="ss11.40">11.40</A> <A HREF="usermanual_en.html#toc11.40">read</A>
-</H2>
-
-<P><CODE><B>read</B> Read the next unread personal message addressed to you</CODE></P>
-
-
-<H2><A NAME="ss11.41">11.41</A> <A HREF="usermanual_en.html#toc11.41">read <msgno></A>
-</H2>
-
-<P><CODE><B>read <msgno></B> Read the specified message</CODE></P>
-
-<P>You can read any messages that are sent as 'non-personal' and also any
-message either sent by or sent to your callsign.</P>
-<H2><A NAME="ss11.42">11.42</A> <A HREF="usermanual_en.html#toc11.42">reject</A>
-</H2>
-
-<P><CODE><B>reject</B> Set a filter to reject something</CODE></P>
-
-<P>Create a filter to reject something</P>
-<P>There are 2 types of filter, accept and reject. See HELP FILTERING for more
-info.</P>
-<H2><A NAME="ss11.43">11.43</A> <A HREF="usermanual_en.html#toc11.43">reject/announce [0-9] <pattern></A>
-</H2>
-
-<P><CODE><B>reject/announce [0-9] <pattern></B> Set a 'reject' filter line for announce</CODE></P>
-
-<P>Create an 'reject this announce' line for a filter. </P>
-<P>A reject filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERING for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.</P>
-<P>You can use any of the following things in this line:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <prefixes or numbers> or: G,GM,GW
- origin_zone <prefixes or numbers>
- origin_state <states> eg: VA,NH,RI,ME
- by_dxcc <prefixes or numbers>
- by_itu <prefixes or numbers>
- by_zone <prefixes or numbers>
- by_state <states> eg: VA,NH,RI,ME
- channel <prefixes>
- wx 1 filter WX announces
- dest <prefixes> eg: 6MUK,WDX (distros)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>some examples:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/ann by_zone 14,15,16 and not by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can use the tag 'all' to reject everything eg:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/ann all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but this probably for advanced users...</P>
-<H2><A NAME="ss11.44">11.44</A> <A HREF="usermanual_en.html#toc11.44">reject/spots [0-9] <pattern></A>
-</H2>
-
-<P><CODE><B>reject/spots [0-9] <pattern></B> Set a 'reject' filter line for spots</CODE></P>
-
-<P>Create a 'reject this spot' line for a filter. </P>
-<P>A reject filter line means that if the spot matches this filter it is
-dumped (not passed on). See HELP FILTERING for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.</P>
-<P>You can use any of the following things in this line:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <prefixes or numbers> or: G,GM,GW
- call_zone <prefixes or numbers>
- call_state <states> eg: VA,NH,RI,ME
- by_dxcc <prefixes or numbers>
- by_itu <prefixes or numbers>
- by_zone <prefixes or numbers>
- by_state <states> eg: VA,NH,RI,ME
- origin <prefixes>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>'call' means the callsign that has spotted 'by' whoever.</P>
-<P>For frequencies, you can use any of the band names defined in
-SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
-thus: hf/ssb. You can also just have a simple range like: 0/30000 -
-this is more efficient than saying simply: on HF (but don't get
-too hung up about that)</P>
-<P>some examples:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/spot 1 on hf
- rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can use the tag 'all' to reject everything eg:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/spot 3 all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>but this probably for advanced users...</P>
-<H2><A NAME="ss11.45">11.45</A> <A HREF="usermanual_en.html#toc11.45">reject/wcy [0-9] <pattern></A>
-</H2>
-
-<P><CODE><B>reject/wcy [0-9] <pattern></B> set a 'reject' WCY filter</CODE></P>
-
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <prefixes or numbers> or: G,GM,GW
- origin_zone <prefixes or numbers>
- by_dxcc <prefixes or numbers>
- by_itu <prefixes or numbers>
- by_zone <prefixes or numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>There are no examples because WCY Broadcasts only come from one place and
-you either want them or not (see UNSET/WCY if you don't want them).</P>
-<P>This command is really provided for future use.</P>
-<P>See HELP FILTER for information.</P>
-<H2><A NAME="ss11.46">11.46</A> <A HREF="usermanual_en.html#toc11.46">reject/wwv [0-9] <pattern></A>
-</H2>
-
-<P><CODE><B>reject/wwv [0-9] <pattern></B> set a 'reject' WWV filter</CODE></P>
-
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <prefixes or numbers> or: G,GM,GW
- origin_zone <prefixes or numbers>
- by_dxcc <prefixes or numbers>
- by_itu <prefixes or numbers>
- by_zone <prefixes or numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>for example </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/wwv by_zone 14,15,16
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>is probably the only useful thing to do (which will only show WWV broadcasts
-by stations in the US).</P>
-<P>See HELP FILTER for information.</P>
-<H2><A NAME="ss11.47">11.47</A> <A HREF="usermanual_en.html#toc11.47">reply</A>
-</H2>
-
-<P><CODE><B>reply</B> Reply (privately) to the last message that you have read</CODE></P>
-
-
-<H2><A NAME="ss11.48">11.48</A> <A HREF="usermanual_en.html#toc11.48">reply <msgno></A>
-</H2>
-
-<P><CODE><B>reply <msgno></B> Reply (privately) to the specified message</CODE></P>
-
-
-<H2><A NAME="ss11.49">11.49</A> <A HREF="usermanual_en.html#toc11.49">reply b <msgno></A>
-</H2>
-
-<P><CODE><B>reply b <msgno></B> Reply as a Bulletin to the specified message</CODE></P>
-
-
-<H2><A NAME="ss11.50">11.50</A> <A HREF="usermanual_en.html#toc11.50">reply noprivate <msgno></A>
-</H2>
-
-<P><CODE><B>reply noprivate <msgno></B> Reply as a Bulletin to the specified message</CODE></P>
-
-
-<H2><A NAME="ss11.51">11.51</A> <A HREF="usermanual_en.html#toc11.51">reply rr <msgno></A>
-</H2>
-
-<P><CODE><B>reply rr <msgno></B> Reply to the specified message with read receipt</CODE></P>
-
-<P>You can reply to a message and the subject will automatically have
-"Re:" inserted in front of it, if it isn't already present.</P>
-<P>You can also use all the extra qualifiers such as RR, PRIVATE,
-NOPRIVATE, B that you can use with the SEND command (see SEND
-for further details)</P>
-<H2><A NAME="ss11.52">11.52</A> <A HREF="usermanual_en.html#toc11.52">send <call> [<call> ...]</A>
-</H2>
-
-<P><CODE><B>send <call> [<call> ...]</B> Send a message to one or more callsigns</CODE></P>
-
-
-<H2><A NAME="ss11.53">11.53</A> <A HREF="usermanual_en.html#toc11.53">send copy <msgno> <call></A>
-</H2>
-
-<P><CODE><B>send copy <msgno> <call></B> Send a copy of a message to someone</CODE></P>
-
-
-<H2><A NAME="ss11.54">11.54</A> <A HREF="usermanual_en.html#toc11.54">send noprivate <call></A>
-</H2>
-
-<P><CODE><B>send noprivate <call></B> Send a message to all stations</CODE></P>
-
-<P>All the SEND commands will create a message which will be sent either to
-an individual callsign or to one of the 'bulletin' addresses. </P>
-<P>SEND <call> on its own acts as though you had typed SEND PRIVATE, that is
-it will mark the message as personal and send it to the cluster node that
-that callsign is connected to. If the <call> you have specified is in fact
-a known bulletin category on your node (eg: ALL) then the message should
-automatically become a bulletin.</P>
-<P>You can have more than one callsign in all of the SEND commands.</P>
-<P>You can have multiple qualifiers so that you can have for example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SEND RR COPY 123 PRIVATE G1TLH G0RDI
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>which should send a copy of message 123 to G1TLH and G0RDI and you will
-receive a read receipt when they have read the message.</P>
-<P>SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak)
-SP is an alias for SEND PRIVATE</P>
-<P>The system will ask you for a subject. Conventionally this should be
-no longer than 29 characters for compatibility. Most modern cluster
-software should accept more.</P>
-<P>You will now be prompted to start entering your text. </P>
-<P>You finish the message by entering '/EX' on a new line. For instance:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- ...
- bye then Jim
- 73 Dirk
- /ex
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>If you have started a message and you don't want to keep it then you
-can abandon the message with '/ABORT' on a new line, like:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- line 1
- line 2
- oh I just can't be bothered with this
- /abort
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>If you abort the message it will NOT be sent.</P>
-<P>When you are entering the text of your message, most normal output (such
-as DX announcements and so on are suppressed and stored for latter display
-(upto 20 such lines are stored, as new ones come along, so the oldest
-lines are dropped).</P>
-<P>Also, you can enter normal commands commands (and get the output
-immediately) whilst in the middle of a message. You do this by typing
-the command preceeded by a '/' character on a new line, so:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- /dx g1tlh 144010 strong signal
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>Will issue a dx annoucement to the rest of the cluster. </P>
-<P>Also, you can add the output of a command to your message by preceeding
-the command with '//', thus :-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- //sh/vhftable
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>This will show YOU the output from SH/VHFTABLE and also store it in the
-message. </P>
-<P>You can carry on with the message until you are ready to send it. </P>
-<H2><A NAME="ss11.55">11.55</A> <A HREF="usermanual_en.html#toc11.55">send private <call></A>
-</H2>
-
-<P><CODE><B>send private <call></B> Send a personal message</CODE></P>
-
-
-<H2><A NAME="ss11.56">11.56</A> <A HREF="usermanual_en.html#toc11.56">send rr <call></A>
-</H2>
-
-<P><CODE><B>send rr <call></B> Send a message and ask for a read receipt</CODE></P>
-
-
-<H2><A NAME="ss11.57">11.57</A> <A HREF="usermanual_en.html#toc11.57">set/address <your address></A>
-</H2>
-
-<P><CODE><B>set/address <your address></B> Record your postal address</CODE></P>
-
-
-<H2><A NAME="ss11.58">11.58</A> <A HREF="usermanual_en.html#toc11.58">set/announce</A>
-</H2>
-
-<P><CODE><B>set/announce</B> Allow announce messages to come out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.59">11.59</A> <A HREF="usermanual_en.html#toc11.59">set/anntalk</A>
-</H2>
-
-<P><CODE><B>set/anntalk</B> Allow talk like announce messages on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.60">11.60</A> <A HREF="usermanual_en.html#toc11.60">set/beep</A>
-</H2>
-
-<P><CODE><B>set/beep</B> Add a beep to DX and other messages on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.61">11.61</A> <A HREF="usermanual_en.html#toc11.61">set/dx</A>
-</H2>
-
-<P><CODE><B>set/dx</B> Allow DX messages to come out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.62">11.62</A> <A HREF="usermanual_en.html#toc11.62">set/dxcq</A>
-</H2>
-
-<P><CODE><B>set/dxcq</B> Show CQ Zones on the end of DX announcements</CODE></P>
-
-
-<H2><A NAME="ss11.63">11.63</A> <A HREF="usermanual_en.html#toc11.63">set/dxgrid</A>
-</H2>
-
-<P><CODE><B>set/dxgrid</B> Allow QRA Grid Squares on the end of DX announcements</CODE></P>
-
-
-<H2><A NAME="ss11.64">11.64</A> <A HREF="usermanual_en.html#toc11.64">set/dxitu</A>
-</H2>
-
-<P><CODE><B>set/dxitu</B> Show ITU Zones on the end of DX announcements</CODE></P>
-
-
-<H2><A NAME="ss11.65">11.65</A> <A HREF="usermanual_en.html#toc11.65">set/echo</A>
-</H2>
-
-<P><CODE><B>set/echo</B> Make the cluster echo your input</CODE></P>
-
-
-<H2><A NAME="ss11.66">11.66</A> <A HREF="usermanual_en.html#toc11.66">set/email <email> ...</A>
-</H2>
-
-<P><CODE><B>set/email <email> ...</B> Set email address(es) and forward your personals</CODE></P>
-
-
-<H2><A NAME="ss11.67">11.67</A> <A HREF="usermanual_en.html#toc11.67">set/here</A>
-</H2>
-
-<P><CODE><B>set/here</B> Tell the system you are present at your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.68">11.68</A> <A HREF="usermanual_en.html#toc11.68">set/homenode <node> </A>
-</H2>
-
-<P><CODE><B>set/homenode <node> </B> Set your normal cluster callsign</CODE></P>
-
-<P>Tell the cluster system where you normally connect to. Any Messages sent
-to you will normally find their way there should you not be connected.
-eg:-
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/HOMENODE gb7djk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.69">11.69</A> <A HREF="usermanual_en.html#toc11.69">set/language <lang></A>
-</H2>
-
-<P><CODE><B>set/language <lang></B> Set the language you want to use</CODE></P>
-
-<P>You can select the language that you want the cluster to use. Currently
-the languages available are en (English), de (German), es (Spanish)
-and nl (Dutch).</P>
-<H2><A NAME="ss11.70">11.70</A> <A HREF="usermanual_en.html#toc11.70">set/location <lat & long></A>
-</H2>
-
-<P><CODE><B>set/location <lat & long></B> Set your latitude and longitude</CODE></P>
-
-
-<H2><A NAME="ss11.71">11.71</A> <A HREF="usermanual_en.html#toc11.71">set/logininfo</A>
-</H2>
-
-<P><CODE><B>set/logininfo</B> Inform when a station logs in locally</CODE></P>
-
-
-<H2><A NAME="ss11.72">11.72</A> <A HREF="usermanual_en.html#toc11.72">set/name <your name></A>
-</H2>
-
-<P><CODE><B>set/name <your name></B> Set your name</CODE></P>
-
-<P>Tell the system what your name is eg:-
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/NAME Dirk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.73">11.73</A> <A HREF="usermanual_en.html#toc11.73">set/page <lines per page></A>
-</H2>
-
-<P><CODE><B>set/page <lines per page></B> Set the lines per page</CODE></P>
-
-<P>Tell the system how many lines you wish on a page when the number of line
-of output from a command is more than this. The default is 20. Setting it
-explicitly to 0 will disable paging.
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/PAGE 30
- SET/PAGE 0
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>The setting is stored in your user profile.</P>
-<H2><A NAME="ss11.74">11.74</A> <A HREF="usermanual_en.html#toc11.74">set/password</A>
-</H2>
-
-<P><CODE><B>set/password</B> Set your own password</CODE></P>
-
-<P>This command only works for a 'telnet' user (currently). It will
-only work if you have a password already set. This initial password
-can only be set by the sysop.</P>
-<P>When you execute this command it will ask you for your old password,
-then ask you to type in your new password twice (to make sure you
-get it right). You may or may not see the data echoed on the screen
-as you type, depending on the type of telnet client you have.</P>
-<H2><A NAME="ss11.75">11.75</A> <A HREF="usermanual_en.html#toc11.75">set/prompt <string></A>
-</H2>
-
-<P><CODE><B>set/prompt <string></B> Set your prompt to <string></CODE></P>
-
-
-<H2><A NAME="ss11.76">11.76</A> <A HREF="usermanual_en.html#toc11.76">set/qra <locator></A>
-</H2>
-
-<P><CODE><B>set/qra <locator></B> Set your QRA Grid locator</CODE></P>
-
-<P>Tell the system what your QRA (or Maidenhead) locator is. If you have not
-done a SET/LOCATION then your latitude and longitude will be set roughly
-correctly (assuming your locator is correct ;-). For example:-
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/QRA JO02LQ
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.77">11.77</A> <A HREF="usermanual_en.html#toc11.77">set/qth <your qth></A>
-</H2>
-
-<P><CODE><B>set/qth <your qth></B> Set your QTH</CODE></P>
-
-<P>Tell the system where you are. For example:-
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/QTH East Dereham, Norfolk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.78">11.78</A> <A HREF="usermanual_en.html#toc11.78">set/talk</A>
-</H2>
-
-<P><CODE><B>set/talk</B> Allow TALK messages to come out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.79">11.79</A> <A HREF="usermanual_en.html#toc11.79">set/usstate</A>
-</H2>
-
-<P><CODE><B>set/usstate</B> Allow US State info on the end of DX announcements</CODE></P>
-
-
-<H2><A NAME="ss11.80">11.80</A> <A HREF="usermanual_en.html#toc11.80">set/wcy</A>
-</H2>
-
-<P><CODE><B>set/wcy</B> Allow WCY messages to come out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.81">11.81</A> <A HREF="usermanual_en.html#toc11.81">set/wwv</A>
-</H2>
-
-<P><CODE><B>set/wwv</B> Allow WWV messages to come out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.82">11.82</A> <A HREF="usermanual_en.html#toc11.82">set/wx</A>
-</H2>
-
-<P><CODE><B>set/wx</B> Allow WX messages to come out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.83">11.83</A> <A HREF="usermanual_en.html#toc11.83">show/chat [<group>] [<lines>]</A>
-</H2>
-
-<P><CODE><B>show/chat [<group>] [<lines>]</B> Show any chat or conferencing </CODE></P>
-
-<P>This command allows you to see any chat or conferencing that has
-occurred whilst you were away. SHOW/CHAT on its own will show data for
-all groups. If you use a group name then it will show only chat for
-that group.</P>
-<H2><A NAME="ss11.84">11.84</A> <A HREF="usermanual_en.html#toc11.84">show/configuration [<node>]</A>
-</H2>
-
-<P><CODE><B>show/configuration [<node>]</B> Show all the nodes and users visible</CODE></P>
-
-<P>This command allows you to see all the users that can be seen
-and the nodes to which they are connected.</P>
-<P>This command is normally abbreviated to: sh/c</P>
-<P>Normally, the list returned will be just for the nodes from your
-country (because the list otherwise will be very long).</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/C ALL
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>will produce a complete list of all nodes. </P>
-<P>BE WARNED: the list that is returned can be VERY long</P>
-<P>It is possible to supply a node or part of a prefix and you will get
-a list of the users for that node or list of nodes starting with
-that prefix.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/C GB7DJK
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/C SK
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.85">11.85</A> <A HREF="usermanual_en.html#toc11.85">show/configuration/node</A>
-</H2>
-
-<P><CODE><B>show/configuration/node</B> Show all the nodes connected locally</CODE></P>
-
-<P>Show all the nodes connected to this node.</P>
-<H2><A NAME="ss11.86">11.86</A> <A HREF="usermanual_en.html#toc11.86">show/contest <year and month></A>
-</H2>
-
-<P><CODE><B>show/contest <year and month></B> Show all the contests for a month</CODE></P>
-
-<P>Show all known contests which are maintained at http://www.sk3bg.se/contest/
-for a particular month or year. The format is reasonably flexible.
-For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/CONTEST sep2003
- SH/CONTEST 03 march
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.87">11.87</A> <A HREF="usermanual_en.html#toc11.87">show/date [<prefix>|<callsign>]</A>
-</H2>
-
-<P><CODE><B>show/date [<prefix>|<callsign>]</B> Show the local time </CODE></P>
-
-<P>This is very nearly the same as SHOW/TIME, the only difference the format
-of the date string if no arguments are given.</P>
-<P>If no prefixes or callsigns are given then this command returns the local
-time and UTC as the computer has it right now. If you give some prefixes
-then it will show UTC and UTC + the local offset (not including DST) at
-the prefixes or callsigns that you specify.</P>
-<H2><A NAME="ss11.88">11.88</A> <A HREF="usermanual_en.html#toc11.88">show/db0sdx <callsign></A>
-</H2>
-
-<P><CODE><B>show/db0sdx <callsign></B> Show QSL infomation from DB0SDX database</CODE></P>
-
-<P>This command queries the DB0SDX QSL server on the internet
-and returns any information available for that callsign. This service
-is provided for users of this software by http://www.qslinfo.de.</P>
-<P>See also SHOW/QRZ, SHOW/WM7D.</P>
-<H2><A NAME="ss11.89">11.89</A> <A HREF="usermanual_en.html#toc11.89">show/dx</A>
-</H2>
-
-<P><CODE><B>show/dx</B> Interrogate the spot database</CODE></P>
-
-<P>If you just type SHOW/DX you will get the last so many spots
-(sysop configurable, but usually 10).</P>
-<P>In addition you can add any number of these commands in very nearly
-any order to the basic SHOW/DX command, they are:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- on <band> - eg 160m 20m 2m 23cm 6mm
- on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
- on <from>/<to> - eg 1000/4000 14000-30000 (in Khz)
- <from>-<to>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- <number> - the number of spots you want
- <from>-<to> - <from> spot no <to> spot no in the selected list
- <from>/<to>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- <prefix> - for a spotted callsign beginning with <prefix>
- *<suffix> - for a spotted callsign ending in <suffix>
- *<string>* - for a spotted callsign containing <string>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- day <number> - starting <number> days ago
- day <from>-<to> - <from> days <to> days ago
- <from>/<to>
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- info <text> - any spots containing <text> in the info or remarks
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <call> - any spots spotted by <call> (spotter <call> is the
- same).
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- qsl - this automatically looks for any qsl info on the call
- held in the spot database.
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- iota [<iota>] - If the iota island number is missing it will look for
- the string iota and anything which looks like an iota
- island number. If you specify then it will look for
- that island.
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- qra [<locator>] - this will look for the specific locator if you specify
- one or else anything that looks like a locator.
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- dxcc - treat the prefix as a 'country' and look for spots
- from that country regardless of actual prefix.
- eg dxcc oq2
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- You can also use this with the 'by' keyword so
- eg by W dxcc
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- e.g.
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/DX 9m0
- SH/DX on 20m info iota
- SH/DX 9a on vhf day 30
- SH/DX rf1p qsl
- SH/DX iota
- SH/DX iota eu-064
- SH/DX qra jn86
- SH/DX dxcc oq2
- SH/DX dxcc oq2 by w dxcc
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.90">11.90</A> <A HREF="usermanual_en.html#toc11.90">show/dxcc <prefix></A>
-</H2>
-
-<P><CODE><B>show/dxcc <prefix></B> Interrogate the spot database by country</CODE></P>
-
-<P>This command takes the <prefix> (which can be a full or partial
-callsign if desired), looks up which internal country number it is
-and then displays all the spots as per SH/DX for that country.</P>
-<P>This is now an alias for 'SHOW/DX DXCC' </P>
-<P>The options for SHOW/DX also apply to this command.
-e.g. </P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/DXCC G
- SH/DXCC W on 20m iota
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>This can be done with the SHOW/DX command like this:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/DX dxcc g
- SH/DX dxcc w on 20m iota
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.91">11.91</A> <A HREF="usermanual_en.html#toc11.91">show/dxqsl <callsign></A>
-</H2>
-
-<P><CODE><B>show/dxqsl <callsign></B> Show any QSL info gathered from spots</CODE></P>
-
-<P>The node collects information from the comment fields in spots (things
-like 'VIA EA7WA' or 'QSL-G1TLH') and stores these in a database.</P>
-<P>This command allows you to interrogate that database and if the callsign
-is found will display the manager(s) that people have spotted. This
-information is NOT reliable, but it is normally reasonably accurate if
-it is spotted enough times.</P>
-<P>For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/dxqsl 4k9w
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can check the raw input spots yourself with:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/dx 4k9w qsl
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>This gives you more background information.</P>
-<H2><A NAME="ss11.92">11.92</A> <A HREF="usermanual_en.html#toc11.92">show/dxstats [days] [date]</A>
-</H2>
-
-<P><CODE><B>show/dxstats [days] [date]</B> Show the DX Statistics</CODE></P>
-
-<P>Show the total DX spots for the last <days> no of days (default is 31),
-starting from a <date> (default: today).</P>
-<H2><A NAME="ss11.93">11.93</A> <A HREF="usermanual_en.html#toc11.93">show/files [<filearea> [<string>]]</A>
-</H2>
-
-<P><CODE><B>show/files [<filearea> [<string>]]</B> List the contents of a filearea</CODE></P>
-
-<P>SHOW/FILES on its own will show you a list of the various fileareas
-available on the system. To see the contents of a particular file
-area type:-
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/FILES <filearea>
-</PRE>
-</CODE></BLOCKQUOTE>
-
-where <filearea> is the name of the filearea you want to see the
-contents of.</P>
-<P>You can also use shell globbing characters like '*' and '?' in a
-string to see a selection of files in a filearea eg:-
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/FILES bulletins arld*
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>See also TYPE - to see the contents of a file.</P>
-<H2><A NAME="ss11.94">11.94</A> <A HREF="usermanual_en.html#toc11.94">show/filter</A>
-</H2>
-
-<P><CODE><B>show/filter</B> Show the contents of all the filters you have set</CODE></P>
-
-<P>Show the contents of all the filters that are set. This command displays
-all the filters set - for all the various categories.</P>
-<H2><A NAME="ss11.95">11.95</A> <A HREF="usermanual_en.html#toc11.95">show/hfstats [days] [date]</A>
-</H2>
-
-<P><CODE><B>show/hfstats [days] [date]</B> Show the HF DX Statistics </CODE></P>
-
-<P>Show the HF DX spots breakdown by band for the last <days> no of days
-(default is 31), starting from a <date> (default: today).</P>
-<H2><A NAME="ss11.96">11.96</A> <A HREF="usermanual_en.html#toc11.96">show/hftable [days] [date] [prefix ...]</A>
-</H2>
-
-<P><CODE><B>show/hftable [days] [date] [prefix ...]</B> Show the HF DX Spotter Table</CODE></P>
-
-<P>Show the HF DX Spotter table for the list of prefixes for the last
-<days> no of days (default is 31), starting from a <date> (default: today).</P>
-<P>If there are no prefixes then it will show the table for your country.</P>
-<P>Remember that some countries have more than one "DXCC country" in them
-(eg G :-), to show them (assuming you are not in G already which is
-specially treated in the code) you must list all the relevant prefixes</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/hftable g gm gd gi gj gw gu
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>Note that the prefixes are converted into country codes so you don't have
-to list all possible prefixes for each country.</P>
-<P>If you want more or less days than the default simply include the
-number you require:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/hftable 20 pa
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>If you want to start at a different day, simply add the date in some
-recognizable form:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/hftable 2 25nov02
- sh/hftable 2 25-nov-02
- sh/hftable 2 021125
- sh/hftable 2 25/11/02
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>This will show the stats for your DXCC for that CQWW contest weekend. </P>
-<P>You can specify either prefixes or full callsigns (so you can see how you
-did against all your mates). You can also say 'all' which will then print
-the worldwide statistics.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/hftable all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.97">11.97</A> <A HREF="usermanual_en.html#toc11.97">show/moon [ndays] [<prefix>|<callsign>]</A>
-</H2>
-
-<P><CODE><B>show/moon [ndays] [<prefix>|<callsign>]</B> Show Moon rise and set times</CODE></P>
-
-<P>Show the Moon rise and set times for a (list of) prefixes or callsigns,
-together with the azimuth and elevation of the sun currently at those
-locations.</P>
-<P>If you don't specify any prefixes or callsigns, it will show the times for
-your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
-together with the current azimuth and elevation.</P>
-<P>In addition, it will show the illuminated fraction of the moons disk.</P>
-<P>If all else fails it will show the Moonrise and set times for the node
-that you are connected to. </P>
-<P>For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MOON
- SH/MOON G1TLH W5UN
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can also use this command to see into the past or the future, so
-if you want to see yesterday's times then do:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MOON -1
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>or in three days time:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MOON +3 W9
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>Upto 366 days can be checked both in the past and in the future.</P>
-<P>Please note that the rise and set times are given as the UT times of rise and
-set on the requested UT day.</P>
-<H2><A NAME="ss11.98">11.98</A> <A HREF="usermanual_en.html#toc11.98">show/muf <prefix> [<hours>][long]</A>
-</H2>
-
-<P><CODE><B>show/muf <prefix> [<hours>][long]</B> Show the likely propagation to a prefix</CODE></P>
-
-<P>This command allow you to estimate the likelihood of you contacting
-a station with the prefix you have specified. The output assumes a modest
-power of 20dBW and receiver sensitivity of -123dBm (about 0.15muV/10dB SINAD)</P>
-<P>The result predicts the most likely operating frequencies and signal
-levels for high frequency (shortwave) radio propagation paths on
-specified days of the year and hours of the day. It is most useful for
-paths between 250 km and 6000 km, but can be used with reduced accuracy
-for paths shorter or longer than this.</P>
-<P>The command uses a routine MINIMUF 3.5 developed by the U.S. Navy and
-used to predict the MUF given the predicted flux, day of the year,
-hour of the day and geographic coordinates of the transmitter and
-receiver. This routine is reasonably accurate for the purposes here,
-with a claimed RMS error of 3.8 MHz, but much smaller and less complex
-than the programs used by major shortwave broadcasting organizations,
-such as the Voice of America.</P>
-<P>The command will display some header information detailing its
-assumptions, together with the locations, latitude and longitudes and
-bearings. It will then show UTC (UT), local time at the other end
-(LT), calculate the MUFs, Sun zenith angle at the midpoint of the path
-(Zen) and the likely signal strengths. Then for each frequency for which
-the system thinks there is a likelihood of a circuit it prints a value.</P>
-<P>The value is currently a likely S meter reading based on the conventional
-6dB / S point scale. If the value has a '+' appended it means that it is
-1/2 an S point stronger. If the value is preceeded by an 'm' it means that
-there is likely to be much fading and by an 's' that the signal is likely
-to be noisy. </P>
-<P>By default SHOW/MUF will show the next two hours worth of data. You
-can specify anything up to 24 hours worth of data by appending the no of
-hours required after the prefix. For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MUF W
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>produces:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
- Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
- Location Lat / Long Azim
- East Dereham, Norfolk 52 41 N 0 57 E 47
- United-States-W 43 0 N 87 54 W 299
- UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
- 18 23 11.5 -35 mS0+ mS2 S3
- 19 0 11.2 -41 mS0+ mS2 S3
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>indicating that you will have weak, fading circuits on top band and
-80m but usable signals on 40m (about S3).</P>
-<P>inputing:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MUF W 24
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>will get you the above display, but with the next 24 hours worth of
-propagation data.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/MUF W L 24
- SH/MUF W 24 Long
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>Gives you an estimate of the long path propagation characterics. It
-should be noted that the figures will probably not be very useful, nor
-terrible accurate, but it is included for completeness.</P>
-<H2><A NAME="ss11.99">11.99</A> <A HREF="usermanual_en.html#toc11.99">show/newconfiguration [<node>]</A>
-</H2>
-
-<P><CODE><B>show/newconfiguration [<node>]</B> Show all the nodes and users visible</CODE></P>
-
-<P>This command allows you to see all the users that can be seen
-and the nodes to which they are connected. </P>
-<P>This command produces essentially the same information as
-SHOW/CONFIGURATION except that it shows all the duplication of
-any routes that might be present It also uses a different format
-which may not take up quite as much space if you don't have any
-loops.</P>
-<P>BE WARNED: the list that is returned can be VERY long</P>
-<H2><A NAME="ss11.100">11.100</A> <A HREF="usermanual_en.html#toc11.100">show/newconfiguration/node</A>
-</H2>
-
-<P><CODE><B>show/newconfiguration/node</B> Show all the nodes connected locally</CODE></P>
-
-<P>Show all the nodes connected to this node in the new format.</P>
-<H2><A NAME="ss11.101">11.101</A> <A HREF="usermanual_en.html#toc11.101">show/prefix <callsign></A>
-</H2>
-
-<P><CODE><B>show/prefix <callsign></B> Interrogate the prefix database </CODE></P>
-
-<P>This command takes the <callsign> (which can be a full or partial
-callsign or a prefix), looks up which internal country number
-it is and then displays all the relevant prefixes for that country
-together with the internal country no, the CQ and ITU regions. </P>
-<P>See also SHOW/DXCC</P>
-<H2><A NAME="ss11.102">11.102</A> <A HREF="usermanual_en.html#toc11.102">show/qra <lat> <long></A>
-</H2>
-
-<P><CODE><B>show/qra <lat> <long></B> Convert lat/long to a QRA Grid locator</CODE></P>
-
-<P>This is a multipurpose command that allows you either to calculate the
-distance and bearing between two locators or (if only one locator is
-given on the command line) the distance and beraing from your station
-to the locator. For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/QRA IO92QL
- SH/QRA JN06 IN73
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>The first example will show the distance and bearing to the locator from
-yourself, the second example will calculate the distance and bearing from
-the first locator to the second. You can use 4 or 6 character locators.</P>
-<P>It is also possible to convert a latitude and longitude to a locator by
-using this command with a latitude and longitude as an argument, for
-example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/QRA 52 41 N 0 58 E
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.103">11.103</A> <A HREF="usermanual_en.html#toc11.103">show/qra <locator> [<locator>]</A>
-</H2>
-
-<P><CODE><B>show/qra <locator> [<locator>]</B> Show distance between QRA Grid locators</CODE></P>
-
-
-<H2><A NAME="ss11.104">11.104</A> <A HREF="usermanual_en.html#toc11.104">show/qrz <callsign></A>
-</H2>
-
-<P><CODE><B>show/qrz <callsign></B> Show any callbook details on a callsign</CODE></P>
-
-<P>This command queries the QRZ callbook server on the internet
-and returns any information available for that callsign. This service
-is provided for users of this software by http://www.qrz.com </P>
-<P>See also SHOW/WM7D for an alternative.</P>
-<H2><A NAME="ss11.105">11.105</A> <A HREF="usermanual_en.html#toc11.105">show/route <callsign> ...</A>
-</H2>
-
-<P><CODE><B>show/route <callsign> ...</B> Show the route to the callsign</CODE></P>
-
-<P>This command allows you to see to which node the callsigns specified are
-connected. It is a sort of inverse sh/config.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/route n2tly
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.106">11.106</A> <A HREF="usermanual_en.html#toc11.106">show/satellite <name> [<hours> <interval>]</A>
-</H2>
-
-<P><CODE><B>show/satellite <name> [<hours> <interval>]</B> Show tracking data</CODE></P>
-
-<P>Show the tracking data from your location to the satellite of your choice
-from now on for the next few hours.</P>
-<P>If you use this command without a satellite name it will display a list
-of all the satellites known currently to the system. </P>
-<P>If you give a name then you can obtain tracking data of all the passes
-that start and finish 5 degrees below the horizon. As default it will
-give information for the next three hours for every five minute period.</P>
-<P>You can alter the number of hours and the step size, within certain
-limits. </P>
-<P>Each pass in a period is separated with a row of '-----' characters</P>
-<P>So for example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/SAT AO-10
- SH/SAT FENGYUN1 12 2
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.107">11.107</A> <A HREF="usermanual_en.html#toc11.107">show/station [<callsign> ..]</A>
-</H2>
-
-<P><CODE><B>show/station [<callsign> ..]</B> Show information about a callsign</CODE></P>
-
-<P>Show the information known about a callsign and whether (and where)
-that callsign is connected to the cluster.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/ST G1TLH
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>If no callsign is given then show the information for yourself.</P>
-<H2><A NAME="ss11.108">11.108</A> <A HREF="usermanual_en.html#toc11.108">show/sun [ndays] [<prefix>|<callsign>]</A>
-</H2>
-
-<P><CODE><B>show/sun [ndays] [<prefix>|<callsign>]</B> Show sun rise and set times</CODE></P>
-
-<P>Show the sun rise and set times for a (list of) prefixes or callsigns,
-together with the azimuth and elevation of the sun currently at those
-locations.</P>
-<P>If you don't specify any prefixes or callsigns, it will show the times for
-your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
-together with the current azimuth and elevation.</P>
-<P>If all else fails it will show the sunrise and set times for the node
-that you are connected to. </P>
-<P>For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/SUN
- SH/SUN G1TLH K9CW ZS
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can also use this command to see into the past or the future, so
-if you want to see yesterday's times then do:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/SUN -1
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>or in three days time:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/SUN +3 W9
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>Upto 366 days can be checked both in the past and in the future.</P>
-<P>Please note that the rise and set times are given as the UT times of rise
-and set on the requested UT day.</P>
-<H2><A NAME="ss11.109">11.109</A> <A HREF="usermanual_en.html#toc11.109">show/time [<prefix>|<callsign>]</A>
-</H2>
-
-<P><CODE><B>show/time [<prefix>|<callsign>]</B> Show the local time </CODE></P>
-
-<P>If no prefixes or callsigns are given then this command returns the local
-time and UTC as the computer has it right now. If you give some prefixes
-then it will show UTC and UTC + the local offset (not including DST) at
-the prefixes or callsigns that you specify.</P>
-<H2><A NAME="ss11.110">11.110</A> <A HREF="usermanual_en.html#toc11.110">show/usdb [call ..]</A>
-</H2>
-
-<P><CODE><B>show/usdb [call ..]</B> Show information held on the FCC Call database</CODE></P>
-
-<P>Show the City and State of a Callsign held on the FCC database if
-his is being run on this system, eg:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/usdb k1xx
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.111">11.111</A> <A HREF="usermanual_en.html#toc11.111">show/vhfstats [days] [date]</A>
-</H2>
-
-<P><CODE><B>show/vhfstats [days] [date]</B> Show the VHF DX Statistics</CODE></P>
-
-<P>Show the VHF DX spots breakdown by band for the last
-<days> no of days (default is 31), starting from a date (default: today).</P>
-<H2><A NAME="ss11.112">11.112</A> <A HREF="usermanual_en.html#toc11.112">show/vhftable [days] [date] [prefix ...]</A>
-</H2>
-
-<P><CODE><B>show/vhftable [days] [date] [prefix ...]</B> Show the VHF DX Spotter Table</CODE></P>
-
-<P>Show the VHF DX Spotter table for the list of prefixes for the last
-<days> no of days (default is 31), starting from a date (default: today).</P>
-<P>If there are no prefixes then it will show the table for your country.</P>
-<P>Remember that some countries have more than one "DXCC country" in them
-(eg G :-), to show them (assuming you are not in G already which is
-specially treated in the code) you must list all the relevant prefixes</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/vhftable g gm gd gi gj gw gu
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>Note that the prefixes are converted into country codes so you don't have
-to list all possible prefixes for each country.</P>
-<P>If you want more or less days than the default simply include the
-number you require:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/vhftable 20 pa
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>If you want to start at a different day, simply add the date in some
-recognizable form:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/vhftable 2 25nov02
- sh/vhftable 2 25-nov-02
- sh/vhftable 2 021125
- sh/vhftable 2 25/11/02
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>This will show the stats for your DXCC for that CQWW contest weekend. </P>
-<P>You can specify either prefixes or full callsigns (so you can see how you
-did against all your mates). You can also say 'all' which will then print
-the worldwide statistics.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- sh/vhftable all
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.113">11.113</A> <A HREF="usermanual_en.html#toc11.113">show/wcy</A>
-</H2>
-
-<P><CODE><B>show/wcy</B> Show last 10 WCY broadcasts</CODE></P>
-
-
-<H2><A NAME="ss11.114">11.114</A> <A HREF="usermanual_en.html#toc11.114">show/wcy <n></A>
-</H2>
-
-<P><CODE><B>show/wcy <n></B> Show last <n> WCY broadcasts</CODE></P>
-
-<P>Display the most recent WCY information that has been received by the system</P>
-
-<H2><A NAME="ss11.115">11.115</A> <A HREF="usermanual_en.html#toc11.115">show/wm7d <callsign></A>
-</H2>
-
-<P><CODE><B>show/wm7d <callsign></B> Show callbook details on a US callsigns</CODE></P>
-
-<P>This command queries the WM7D callbook server on the internet
-and returns any information available for that US callsign. This service
-is provided for users of this software by http://www.wm7d.net.</P>
-<P>See also SHOW/QRZ. </P>
-<H2><A NAME="ss11.116">11.116</A> <A HREF="usermanual_en.html#toc11.116">show/wwv</A>
-</H2>
-
-<P><CODE><B>show/wwv</B> Show last 10 WWV broadcasts</CODE></P>
-
-
-<H2><A NAME="ss11.117">11.117</A> <A HREF="usermanual_en.html#toc11.117">show/wwv <n></A>
-</H2>
-
-<P><CODE><B>show/wwv <n></B> Show last <n> WWV broadcasts</CODE></P>
-
-<P>Display the most recent WWV information that has been received by the system</P>
-<H2><A NAME="ss11.118">11.118</A> <A HREF="usermanual_en.html#toc11.118">sysop</A>
-</H2>
-
-<P><CODE><B>sysop</B> Regain your privileges if you login remotely</CODE></P>
-
-<P>The system automatically reduces your privilege level to that of a
-normal user if you login in remotely. This command allows you to
-regain your normal privilege level. It uses the normal system: five
-numbers are returned that are indexes into the character array that is
-your assigned password (see SET/PASSWORD). The indexes start from
-zero.</P>
-<P>You are expected to return a string which contains the characters
-required in the correct order. You may intersperse those characters
-with others to obscure your reply for any watchers. For example (and
-these values are for explanation :-):</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- password = 012345678901234567890123456789
- > sysop
- 22 10 15 17 3
-</PRE>
-</CODE></BLOCKQUOTE>
-
-you type:-
-<BLOCKQUOTE><CODE>
-<PRE>
- aa2bbbb0ccc5ddd7xxx3n
- or 2 0 5 7 3
- or 20573
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>They will all match. If there is no password you will still be offered
-numbers but nothing will happen when you input a string. Any match is
-case sensitive.</P>
-<H2><A NAME="ss11.119">11.119</A> <A HREF="usermanual_en.html#toc11.119">talk <call> > <node> [<text>]</A>
-</H2>
-
-<P><CODE><B>talk <call> > <node> [<text>]</B> Send a text message to another station via a node</CODE></P>
-
-<P>Send a short message to any other station that is visible on the cluster
-system. You can send it to anyone you can see with a SHOW/CONFIGURATION
-command, they don't have to be connected locally.</P>
-<P>The second form of TALK is used when other cluster nodes are connected
-with restricted information. This usually means that they don't send
-the user information usually associated with logging on and off the cluster.</P>
-<P>If you know that G3JNB is likely to be present on GB7TLH, but you can only
-see GB7TLH in the SH/C list but with no users, then you would use the
-second form of the talk message.</P>
-<P>If you want to have a ragchew with someone you can leave the text message
-out and the system will go into 'Talk' mode. What this means is that a
-short message is sent to the recipient telling them that you are in a
-'Talking' frame of mind and then you just type - everything you send will
-go to the station that you asked for. </P>
-<P>All the usual announcements, spots and so on will still come out on your
-terminal.</P>
-<P>If you want to do something (such as send a spot) you preceed the normal
-command with a '/' character, eg:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
- /HELP talk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>To leave talk mode type:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- /EX
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>If you are in 'Talk' mode, there is an extention to the '/' command which
-allows you to send the output to all the people you are talking to. You do
-with the '//' command. For example:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- //sh/hftable
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>will send the hftable as you have it to all the people you are currently
-talking to.</P>
-<H2><A NAME="ss11.120">11.120</A> <A HREF="usermanual_en.html#toc11.120">talk <call> [<text>]</A>
-</H2>
-
-<P><CODE><B>talk <call> [<text>]</B> Send a text message to another station</CODE></P>
-
-
-<H2><A NAME="ss11.121">11.121</A> <A HREF="usermanual_en.html#toc11.121">type <filearea>/<name></A>
-</H2>
-
-<P><CODE><B>type <filearea>/<name></B> Look at the contents of a file in one of the fileareas</CODE></P>
-
-<P>Type out the contents of a file in a filearea. So, for example, in
-filearea 'bulletins' you want to look at file 'arld051' you would
-enter:-
-<BLOCKQUOTE><CODE>
-<PRE>
- TYPE bulletins/arld051
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>See also SHOW/FILES to see what fileareas are available and a
-list of content.</P>
-<H2><A NAME="ss11.122">11.122</A> <A HREF="usermanual_en.html#toc11.122">unset/announce</A>
-</H2>
-
-<P><CODE><B>unset/announce</B> Stop announce messages coming out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.123">11.123</A> <A HREF="usermanual_en.html#toc11.123">unset/anntalk</A>
-</H2>
-
-<P><CODE><B>unset/anntalk</B> Stop talk like announce messages on your terminal</CODE></P>
-
-<P>The announce system on legacy cluster nodes is used as a talk
-substitute because the network is so poorly connected. If you:</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- unset/anntalk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>you will suppress several of these announces, you may miss the odd
-useful one as well, but you would probably miss them anyway in the
-welter of useless ones.</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/anntalk
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>allows you to see them again. This is the default.</P>
-<H2><A NAME="ss11.124">11.124</A> <A HREF="usermanual_en.html#toc11.124">unset/beep</A>
-</H2>
-
-<P><CODE><B>unset/beep</B> Stop beeps for DX and other messages on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.125">11.125</A> <A HREF="usermanual_en.html#toc11.125">unset/dx</A>
-</H2>
-
-<P><CODE><B>unset/dx</B> Stop DX messages coming out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.126">11.126</A> <A HREF="usermanual_en.html#toc11.126">unset/dxcq</A>
-</H2>
-
-<P><CODE><B>unset/dxcq</B> Stop CQ Zones on the end of DX announcements</CODE></P>
-
-<P>Display both the Spotter's and the Spotted's CQ Zone on the end
-of a DX announcement (there is just enough room). Some user programs
-cannot cope with this. The Spotter's CQ is on the RHS of the
-time, the Spotted's CQ is on the LHS.</P>
-<P>Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE</P>
-<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss11.127">11.127</A> <A HREF="usermanual_en.html#toc11.127">unset/dxgrid</A>
-</H2>
-
-<P><CODE><B>unset/dxgrid</B> Stop QRA Grid Squares on the end of DX announcements</CODE></P>
-
-<P>A standard feature which is enabled in version 1.43 and above is
-that if the spotter's grid square is known it is output on the end
-of a DX announcement (there is just enough room). Some user programs
-cannot cope with this. You can use this command to reset (or set)
-this feature.</P>
-<P>Conflicts with: SET/DXCQ, SET/DXITU</P>
-<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss11.128">11.128</A> <A HREF="usermanual_en.html#toc11.128">unset/dxitu</A>
-</H2>
-
-<P><CODE><B>unset/dxitu</B> Stop ITU Zones on the end of DX announcements</CODE></P>
-
-<P>Display both the Spotter's and the Spotted's ITU Zone on the end
-of a DX announcement (there is just enough room). Some user programs
-cannot cope with this. The Spotter's ITU is on the RHS of the
-time, the Spotted's ITU is on the LHS.</P>
-<P>Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE</P>
-<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss11.129">11.129</A> <A HREF="usermanual_en.html#toc11.129">unset/echo</A>
-</H2>
-
-<P><CODE><B>unset/echo</B> Stop the cluster echoing your input</CODE></P>
-
-<P>If you are connected via a telnet session, different implimentations
-of telnet handle echo differently depending on whether you are
-connected via port 23 or some other port. You can use this command
-to change the setting appropriately. </P>
-<P>The setting is stored in your user profile.</P>
-<P>YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.</P>
-<H2><A NAME="ss11.130">11.130</A> <A HREF="usermanual_en.html#toc11.130">unset/email</A>
-</H2>
-
-<P><CODE><B>unset/email</B> Stop personal msgs being forwarded by email</CODE></P>
-
-<P>If any personal messages come in for your callsign then you can use
-these commands to control whether they are forwarded onto your email
-address. To enable the forwarding do something like:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/EMAIL mike.tubby@somewhere.com
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>You can have more than one email address (each one separated by a space).
-Emails are forwarded to all the email addresses you specify.</P>
-<P>You can disable forwarding by:-</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- UNSET/EMAIL
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-
-<H2><A NAME="ss11.131">11.131</A> <A HREF="usermanual_en.html#toc11.131">unset/here</A>
-</H2>
-
-<P><CODE><B>unset/here</B> Tell the system you are absent from your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.132">11.132</A> <A HREF="usermanual_en.html#toc11.132">unset/logininfo</A>
-</H2>
-
-<P><CODE><B>unset/logininfo</B> Inform when a station logs out locally</CODE></P>
-
-
-<H2><A NAME="ss11.133">11.133</A> <A HREF="usermanual_en.html#toc11.133">unset/privilege</A>
-</H2>
-
-<P><CODE><B>unset/privilege</B> Remove any privilege for this session</CODE></P>
-
-<P>You can use this command to 'protect' this session from unauthorised
-use. If you want to get your normal privilege back you will need to
-either logout and login again (if you are on a console) or use the
-SYSOP command.</P>
-<H2><A NAME="ss11.134">11.134</A> <A HREF="usermanual_en.html#toc11.134">unset/prompt</A>
-</H2>
-
-<P><CODE><B>unset/prompt</B> Set your prompt back to default</CODE></P>
-
-<P>This command will set your user prompt to exactly the string that you
-say. The point of this command to enable a user to interface to programs
-that are looking for a specific prompt (or else you just want a different
-fixed prompt).</P>
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/PROMPT clx >
-</PRE>
-</CODE></BLOCKQUOTE>
-</P>
-<P>UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back to
-normal.</P>
-<H2><A NAME="ss11.135">11.135</A> <A HREF="usermanual_en.html#toc11.135">unset/talk</A>
-</H2>
-
-<P><CODE><B>unset/talk</B> Stop TALK messages coming out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.136">11.136</A> <A HREF="usermanual_en.html#toc11.136">unset/usstate</A>
-</H2>
-
-<P><CODE><B>unset/usstate</B> Stop US State info on the end of DX announcements</CODE></P>
-
-<P>If the spotter's or spotted's US State is known it is output on the
-end of a DX announcement (there is just enough room). </P>
-<P>A spotter's state will appear on the RHS of the time (like
-SET/DXGRID) and the spotted's State will appear on the LHS of the
-time field. Any information found will override any locator
-information from SET/DXGRID.</P>
-<P>Some user programs cannot cope with this. You can use this command
-to reset (or set) this feature.</P>
-<P>Conflicts with: SET/DXCQ, SET/DXITU</P>
-<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
-<H2><A NAME="ss11.137">11.137</A> <A HREF="usermanual_en.html#toc11.137">unset/wcy</A>
-</H2>
-
-<P><CODE><B>unset/wcy</B> Stop WCY messages coming out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.138">11.138</A> <A HREF="usermanual_en.html#toc11.138">unset/wwv</A>
-</H2>
-
-<P><CODE><B>unset/wwv</B> Stop WWV messages coming out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.139">11.139</A> <A HREF="usermanual_en.html#toc11.139">unset/wx</A>
-</H2>
-
-<P><CODE><B>unset/wx</B> Stop WX messages coming out on your terminal</CODE></P>
-
-
-<H2><A NAME="ss11.140">11.140</A> <A HREF="usermanual_en.html#toc11.140">who</A>
-</H2>
-
-<P><CODE><B>who</B> Show who is physically connected</CODE></P>
-
-<P>This is a quick listing that shows which callsigns are connected and
-what sort of connection they have</P>
-<H2><A NAME="ss11.141">11.141</A> <A HREF="usermanual_en.html#toc11.141">wx <text></A>
-</H2>
-
-<P><CODE><B>wx <text></B> Send a weather message to local users</CODE></P>
-
-
-<H2><A NAME="ss11.142">11.142</A> <A HREF="usermanual_en.html#toc11.142">wx full <text></A>
-</H2>
-
-<P><CODE><B>wx full <text></B> Send a weather message to all cluster users</CODE></P>
-
-