+<P>Create an 'reject this announce' line for a filter.
+<P>An reject filter line means that if the announce matches this filter it is
+passed onto the user. See HELP FILTERS for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+<P>You can use any of the following things in this line:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ info <string> eg: iota or qsl
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+ wx 1 filter WX announces
+ dest <prefixes> eg: 6MUK,WDX (distros)
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>some examples:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ rej/ann by_zone 14,15,16 and not by G,M,2
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>You can use the tag 'all' to reject everything eg:
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ rej/ann all
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>but this probably for advanced users...
+<P>
+<H2><A NAME="ss8.54">8.54 reject/announce (extended for sysops) (8)</A>
+</H2>
+
+<P><CODE><B>reject/announce <call> [input] [0-9] <pattern></B> Announce filter sysop version</CODE>
+<P>
+<P>This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ reject/ann by G,M,2
+ reject/ann input node_default by G,M,2
+ reject/ann user_default by G,M,2
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>
+<H2><A NAME="ss8.55">8.55 reject/spots (0)</A>
+</H2>
+
+<P><CODE><B>reject/spots [0-9] <pattern></B> Set a reject filter line for spots</CODE>
+<P>
+<P>Create a 'reject this spot' line for a filter.
+<P>A reject filter line means that if the spot matches this filter it is
+dumped (not passed on). See HELP FILTERS for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+<P>You can use any of the following things in this line:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+ call <prefixes> eg: G,PA,HB9
+ info <string> eg: iota or qsl
+ by <prefixes>
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ origin <prefixes>
+ channel <prefixes>
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>For frequencies, you can use any of the band names defined in
+SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
+thus: hf/ssb. You can also just have a simple range like: 0/30000 -
+this is more efficient than saying simply: on HF (but don't get
+too hung up about that)
+<P>some examples:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ rej/spot 1 on hf
+ rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>You can use the tag 'all' to reject everything eg:
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ rej/spot 3 all
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>but this probably for advanced users...
+<P>
+<H2><A NAME="ss8.56">8.56 reject/spots (extended for sysops) (8)</A>
+</H2>
+
+<P><CODE><B>reject/spots <call> [input] [0-9] <pattern></B>
+Reject spot filter sysop version </CODE>
+<P>
+<P>This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ reject/spot db0sue-7 1 by_zone 14,15,16
+ reject/spot node_default all
+ set/hops node_default 10
+
+ reject/spot user_default by G,M,2
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>
+<H2><A NAME="ss8.57">8.57 reject/wcy (0)</A>
+</H2>
+
+<P><CODE><B>reject/wcy [0-9] <pattern></B> Set a reject WCY filter</CODE>
+<P>
+<P>It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>There are no examples because WCY Broadcasts only come from one place and
+you either want them or not (see UNSET/WCY if you don't want them).
+<P>This command is really provided for future use.
+<P>See HELP FILTER for information.
+<P>
+<H2><A NAME="ss8.58">8.58 reject/wcy (extended for sysops) (8)</A>
+</H2>
+
+<P><CODE><B>reject/wcy <call> [input] [0-9] <pattern></B>
+WCY reject filter sysop version</CODE>
+<P>
+<P>This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+<P>reject/wcy gb7djk all
+<P>
+<H2><A NAME="ss8.59">8.59 reject/wwv (0)</A>
+</H2>
+
+<P><CODE><B>reject/wwv [0-9] <pattern></B> Set a reject WWV filter</CODE>
+<P>
+<P>It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>for example
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ reject/wwv by_zone 14,15,16
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>is probably the only useful thing to do (which will only show WWV broadcasts
+by stations in the US).
+<P>See HELP FILTER for information.
+<P>
+<H2><A NAME="ss8.60">8.60 reject/wwv (extended for sysops) (8)</A>
+</H2>
+
+<P><CODE><B>reject/wwv <call> [input] [0-9] <pattern></B>
+WWV reject filter sysop version</CODE>
+<P>
+<P>This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ reject/wwv db0sue-7 1 by_zone 4
+ reject/wwv node_default all
+
+ reject/wwv user_default by W
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>
+<H2><A NAME="ss8.61">8.61 reply (0)</A>
+</H2>
+
+<P><CODE><B>reply</B> Reply (privately) to the last message that you have read<BR>
+<B>reply <msgno></B> Reply (privately) to the specified message<BR>
+<B>reply B <msgno></B> Reply as a Bulletin to the specified message<BR>
+<B>reply NOPrivate <msgno></B> Reply as a Bulletin to the specified
+message<BR>
+<B>reply RR <msgno></B> Reply to the specified message with read receipt<BR></CODE>
+<P>
+<P>You can reply to a message and the subject will automatically have
+"Re:" inserted in front of it, if it isn't already present.
+<P>You can also use all the extra qualifiers such as RR, PRIVATE,
+NOPRIVATE, B that you can use with the SEND command (see SEND
+for further details)
+<P>
+<H2><A NAME="ss8.62">8.62 send (0)</A>
+</H2>
+
+<P><CODE><B>send <call> [<call> ...]</B> Send a message to one or more callsigns<BR>
+<B>send RR <call></B> Send a message and ask for a read receipt<BR>
+<B>send COPY <msgno> <call></B> Send a copy of a message to someone<BR>
+<B>send PRIVATE <call></B> Send a personal message<BR>
+<B>send NOPRIVATE <call></B> Send a message to all stations<BR></CODE>
+<P>
+<P>All the SEND commands will create a message which will be sent either to
+an individual callsign or to one of the 'bulletin' addresses.
+<P>SEND <call> on its own acts as though you had typed SEND PRIVATE, that is
+it will mark the message as personal and send it to the cluster node that
+that callsign is connected to.
+<P>You can have more than one callsign in all of the SEND commands.
+<P>You can have multiple qualifiers so that you can have for example:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SEND RR COPY 123 PRIVATE G1TLH G0RDI
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>which should send a copy of message 123 to G1TLH and G0RDI and you will
+receive a read receipt when they have read the message.
+<P>SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak)
+SP is an alias for SEND PRIVATE
+<P>
+<H2><A NAME="ss8.63">8.63 set/address (0)</A>
+</H2>
+
+<P><CODE><B>set/address <your_address></B> Record your postal address</CODE>
+<P>
+<P>Literally, record your address details on the cluster.
+<P>
+<H2><A NAME="ss8.64">8.64 set/announce (0)</A>
+</H2>
+
+<P><CODE><B>set/announce</B> Allow announce messages</CODE>
+<P>
+<P>Allow announce messages to arrive at your terminal.
+<P>
+<H2><A NAME="ss8.65">8.65 set/arcluster (5)</A>
+</H2>
+
+<P><CODE><B>set/arcluster <node_call> [<node_call> ...]</B> Make
+the node_call an AR-Cluster type node</CODE>
+<P>
+<P>Set the node_call as an AR-Cluster type node
+<P>
+<H2><A NAME="ss8.66">8.66 set/baddx (8)</A>
+</H2>
+
+<P><CODE><B>set/baddx <call></B> Stop words we do not wish to see in the callsign field
+of a dx spot being propagated</CODE>
+<P>
+<P>Setting a word as 'baddx' will prevent spots with that word in the callsign
+field of a DX spot from going any further. They will not be displayed and they
+will not be sent onto other nodes.
+<P>The word must be wriiten in full, no wild cards are allowed eg:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ set/baddx FORSALE VIDEO FR0G
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>To allow a word again, use the following command ...
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ unset/baddx VIDEO
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>
+<H2><A NAME="ss8.67">8.67 set/badnode (6)</A>
+</H2>
+
+<P><CODE><B>set/badnode <node_call></B> Stop spots from this node_call
+being propagated</CODE>
+<P>
+<P>Setting a callsign as a 'badnode' will prevent spots from that node
+going any further. They will not be displayed and they will not be
+sent onto other nodes.
+<P>The call can be a full or partial call (or a prefix), eg:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ set/badnode K1TTT
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>will stop anything from K1TTT (including any SSID's)
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ unset/badnode K1TTT
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>will allow spots from him again.
+<P>Use with extreme care. This command may well be superceded by FILTERing.
+<P>
+<H2><A NAME="ss8.68">8.68 set/badspotter (8)</A>
+</H2>
+
+<P><CODE><B>set/badspotter <call></B> Stop spots from this callsign being propagated</CODE>
+<P>
+<P>Setting a callsign as a 'badspotter' will prevent spots from this callsign
+going any further. They will not be displayed and they will not be
+sent onto other nodes.
+<P>The call must be written in full, no wild cards are allowed eg:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ set/badspotter VE2STN
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>will stop anything from VE2STN. If you want SSIDs as well then you must
+enter them specifically.
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ unset/badspotter VE2STN
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>will allow spots from him again.
+<P>Use with extreme care. This command may well be superceded by FILTERing.
+<P>
+<H2><A NAME="ss8.69">8.69 set/beep (0)</A>
+</H2>
+
+<P><CODE><B>set/beep</B> Add beeps to terminal messages</CODE>
+<P>
+<P>Add a beep to DX and other terminal messages.
+<P>
+<H2><A NAME="ss8.70">8.70 set/clx (5)</A>
+</H2>
+
+<P><CODE><B>set/clx <node_call> [<node_call> ...]</B> Make
+the node_call a CLX type node</CODE>
+<P>
+<P>Set the node_call as a CLX type node
+<P>
+<H2><A NAME="ss8.71">8.71 set/debug (9)</A>
+</H2>
+
+<P><CODE><B>set/debug <name></B> Add a debug level to the debug set</CODE>
+<P>
+<P>You can choose to log several different levels. The levels are
+<P>chan
+state
+msg
+cron
+connect
+<P>You can show what levels you are logging with the <EM>show/debug</EM>
+command.
+<P>You can remove a debug level with unset/debug <name>
+<P>
+<H2><A NAME="ss8.72">8.72 set/dx (0)</A>
+</H2>
+
+<P><CODE><B>set/dx</B>Allow DX messages to arrive at your terminal</CODE>
+<P>
+<P>You can stop DX messages with the <EM>unset/dx</EM> command
+<P>
+<H2><A NAME="ss8.73">8.73 set/dxgrid (0)</A>
+</H2>
+
+<P><CODE><B>set/dxgrid</B>Allow grid squares on the end of DX messages</CODE>
+<P>
+<P>Some logging programs do not like the additional information at
+the end of a DX spot. If this is the case, use the <EM>unset/dxgrid</EM>
+command to remove the grid squares.
+<P>
+<H2><A NAME="ss8.74">8.74 set/dxnet (5)</A>
+</H2>
+
+<P><CODE><B>set/dxnet <node_call> [<node_call> ...]</B> Make
+the node_call a DXNet type node</CODE>
+<P>
+<P>Set the node_call as a DXNet type node
+<P>
+<H2><A NAME="ss8.75">8.75 set/echo (0)</A>
+</H2>
+
+<P><CODE><B>set/echo</B> Make the cluster echo your input</CODE>
+<P>
+<P>If you are connected via a telnet session, different implimentations
+of telnet handle echo differently depending on whether you are
+connected via port 23 or some other port. You can use this command
+to change the setting appropriately.
+<P>You can remove the echo with the <EM>unset/echo</EM> command
+<P>The setting is stored in your user profile.
+<P>YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
+<P>
+<H2><A NAME="ss8.76">8.76 set/here (0)</A>
+</H2>
+
+<P><CODE><B>set/here</B> Set the here flag</CODE>
+<P>
+<P>Let others on the cluster know you are here by only displaying your
+callsign. If you are away from your terminal you can use the <EM>unset/here</EM>
+command to let people know you are away. This simply puts brackets
+around your callsign to indicate you are not available.
+<P>
+<H2><A NAME="ss8.77">8.77 set/homenode (0)</A>
+</H2>
+
+<P><CODE><B>set/homenode <node_call></B> Set your home cluster</CODE>
+<P>
+<P>Tell the cluster system where you normally connect to. Any Messages sent
+to you will normally find their way there should you not be connected.
+eg:-
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SET/HOMENODE gb7djk
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>
+<H2><A NAME="ss8.78">8.78 set/hops (8)</A>
+</H2>
+
+<P><CODE><B>set/hops <node_call> ann|spots|wwv|wcy <n></B>
+Set hop count</CODE>
+<P>
+<P>Set the hop count for a particular type of broadcast for a node.
+<P>This command allows you to set up special hop counts for a node
+for currently: announce, spots, wwv and wcy broadcasts.
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+eg:
+ set/hops gb7djk ann 10
+ set/hops gb7mbc spots 20
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>Set SHOW/HOPS for information on what is already set. This command
+creates a filter and works in conjunction with the filter system.
+<P>
+<H2><A NAME="ss8.79">8.79 set/isolate (9)</A>
+</H2>
+
+<P><CODE><B>set/isolate <node call></B> Isolate a node from the rest of the network</CODE>
+<P>
+<P>Connect a node to your system in such a way that you are a full protocol