add entries for all in stat/route_user / node

[spider.git] / cmd / Commands_en.hlp

diff --git a/cmd/Commands_en.hlp b/cmd/Commands_en.hlp
index 959d956f6b3770a7e24b67f694640cce55a24df4..f5ede28a305fd425485109ae8a36b5e56f39d3d3 100644 (file)
--- a/cmd/Commands_en.hlp
+++ b/cmd/Commands_en.hlp
@@ -15,7 +15,7 @@
 Create an 'accept this announce' line for a filter. 
 
 An accept filter line means that if the announce matches this filter it is
 Create an 'accept this announce' line for a filter. 
 
 An accept filter line means that if the announce matches this filter it is

-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this

 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-


@@ -55,11 +55,39 @@ default for nodes and users eg:-
   accept/ann input node_default by G,M,2
   accept/ann user_default by G,M,2
 
   accept/ann input node_default by G,M,2
   accept/ann user_default by G,M,2
 

+=== 8^ACCEPT/ROUTE <call> [0-9] <pattern>^Set an 'accept' filter line for routing
+Create an 'accept this routing PC Protocol' line for a filter. 
+
+An accept filter line means that if a PC16/17/19/21/24/41/50 matches this filter 
+it is passed thru that interface. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+  call <prefixes>        the callsign of the thingy
+  call_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  call_itu <numbers>
+  call_zone <numbers>
+  origin <prefixes>      really the interface it came in on
+  origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  origin_itu <numbers>
+  origin_zone <numbers>
+
+some examples:-
+
+  acc/route gb7djk call_dxcc 61,38 (send only UK+EIRE nodes)
+  acc/route gb7djk call gb7djk     (equiv to SET/ISOLATE)
+
+You can use the tag 'all' to accept everything eg:
+
+  acc/route all
+
+

 === 0^ACCEPT/SPOTS [0-9] <pattern>^Set an 'accept' filter line for spots
 Create an 'accept this spot' line for a filter. 
 
 An accept filter line means that if the spot matches this filter it is
 === 0^ACCEPT/SPOTS [0-9] <pattern>^Set an 'accept' filter line for spots
 Create an 'accept this spot' line for a filter. 
 
 An accept filter line means that if the spot matches this filter it is

-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this

 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-


@@ -95,6 +123,7 @@ You can use the tag 'all' to accept everything, eg:
 
 but this probably for advanced users...
 
 
 but this probably for advanced users...
 

+

 === 8^ACCEPT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
 This version allows a sysop to set a filter for a callsign as well as the
 default for nodes and users eg:-
 === 8^ACCEPT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
 This version allows a sysop to set a filter for a callsign as well as the
 default for nodes and users eg:-


@@ -739,7 +768,7 @@ As a sysop you may read any message on the system
 Create an 'reject this announce' line for a filter. 
 
 A reject filter line means that if the announce matches this filter it is
 Create an 'reject this announce' line for a filter. 
 
 A reject filter line means that if the announce matches this filter it is

-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this

 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-


@@ -779,7 +808,7 @@ default for nodes and users eg:-
 Create a 'reject this spot' line for a filter. 
 
 A reject filter line means that if the spot matches this filter it is
 Create a 'reject this spot' line for a filter. 
 
 A reject filter line means that if the spot matches this filter it is

-dumped (not passed on). See HELP FILTERS for more info. Please read this
+dumped (not passed on). See HELP FILTERING for more info. Please read this

 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-


@@ -815,6 +844,32 @@ You can use the tag 'all' to reject everything eg:
 
 but this probably for advanced users...
 
 
 but this probably for advanced users...
 

+=== 8^REJECT/ROUTE <call> [0-9] <pattern>^Set an 'reject' filter line for routing
+Create an 'reject this routing PC Protocol' line for a filter. 
+
+An reject filter line means that if a PC16/17/19/21/24/41/50 matches this filter 
+it is NOT passed thru that interface. See HELP FILTERING for more info. Please 
+read this to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+  call <prefixes>        the callsign of the thingy
+  call_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  call_itu <numbers>
+  call_zone <numbers>
+  origin <prefixes>      really the interface it came in on
+  origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  origin_itu <numbers>
+  origin_zone <numbers>
+
+some examples:-
+
+  rej/route gb7djk call_dxcc 61,38 (everything except  UK+EIRE nodes)
+
+You can use the tag 'all' to reject everything eg:
+
+  rej/route all     (equiv to [very] restricted mode)
+

 === 8^REJECT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
 This version allows a sysop to set a filter for a callsign as well as the
 default for nodes and users eg:-
 === 8^REJECT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
 This version allows a sysop to set a filter for a callsign as well as the
 default for nodes and users eg:-


@@ -983,6 +1038,8 @@ Use with extreme care. This command may well be superceded by FILTERing.
 === 0^SET/BEEP^Add a beep to DX and other messages on your terminal
 === 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
 
 === 0^SET/BEEP^Add a beep to DX and other messages on your terminal
 === 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
 

+=== 5^SET/BBS <call> [<call>..]^Make the callsign a BBS
+

 === 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
 
 === 9^SET/DEBUG <name>^Add a debug level to the debug set
 === 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
 
 === 9^SET/DEBUG <name>^Add a debug level to the debug set


@@ -1149,6 +1206,12 @@ to commands are as default:-
 If you are a sysop and you come in as a normal user on a remote connection
 your privilege will automatically be set to 0.
 
 If you are a sysop and you come in as a normal user on a remote connection
 your privilege will automatically be set to 0.
 

+=== 0^UNSET/PRIVILEGE^Remove any privilege for this session
+You can use this command to 'protect' this session from unauthorised
+use. If you want to get your normal privilege back you will need to
+either logout and login again (if you are on a console) or use the
+SYSOP command.
+

 === 9^SET/PASSWORD <callsign> <string>^Set a users password
 The password for a user can only be set by a full sysop. The string
 can contain any characters but any spaces are removed (you can type in
 === 9^SET/PASSWORD <callsign> <string>^Set a users password
 The password for a user can only be set by a full sysop. The string
 can contain any characters but any spaces are removed (you can type in


@@ -1194,6 +1257,21 @@ for more information.
 Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
 for more information.
 
 Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
 for more information.
 

+=== 0^SHOW/CONFIGURATION [<node>]^Show all the nodes and users visible
+This command allows you to see all the users that can be seen
+and the nodes to which they are connected.
+
+This command is normally abbreviated to: sh/c
+
+BE WARNED: the list that is returned can be VERY long
+
+=== 0^SHOW/CONFIGURATION/NODE^Show all the nodes connected locally
+Show all the nodes connected to this node.
+
+=== 1^SHOW/CONNECT^Show all the active connections
+This command shows information on all the active connections known to
+the node. This command gives slightly more information than WHO.
+

 === 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time 
 This is very nearly the same as SHOW/TIME, the only difference the format
 of the date string if no arguments are given.
 === 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time 
 This is very nearly the same as SHOW/TIME, the only difference the format
 of the date string if no arguments are given.


@@ -1449,6 +1527,15 @@ So for example:-
 SH/SAT AO-10 
 SH/SAT FENGYUN1 12 2
 
 SH/SAT AO-10 
 SH/SAT FENGYUN1 12 2
 

+=== 6^SHOW/STATION ALL [<regex>]^Show list of users in the system
+=== 0^SHOW/STATION [<callsign> ..]^Show information about a callsign
+Show the information known about a callsign and whether (and where)
+that callsign is connected to the cluster.
+
+  SH/ST G1TLH
+
+If no callsign is given then show the information for yourself.
+

 === 0^SHOW/SUN [<prefix>|<callsign>]^Show sun rise and set times
 Show the sun rise and set times for a (list of) prefixes or callsigns, 
 together with the azimuth and elevation of the sun currently at those
 === 0^SHOW/SUN [<prefix>|<callsign>]^Show sun rise and set times
 Show the sun rise and set times for a (list of) prefixes or callsigns, 
 together with the azimuth and elevation of the sun currently at those


@@ -1505,10 +1592,20 @@ you are on or else for the callsign that you asked for.
 
 Only the fields that are defined (in perl term) will be displayed.
 
 
 Only the fields that are defined (in perl term) will be displayed.
 

-=== 5^STAT/MSG <msgno>^Show the status of a message
+=== 1^STAT/MSG^Show the status of the message system
+=== 1^STAT/MSG <msgno>^Show the status of a message

 This command shows the internal status of a message and includes information
 such as to whom it has been forwarded, its size, origin etc etc.
 
 This command shows the internal status of a message and includes information
 such as to whom it has been forwarded, its size, origin etc etc.
 

+If no message number is given then the status of the message system is 
+displayed.
+
+=== 5^STAT/ROUTE_NODE <callsign>^Show the data in a Route::Node object
+=== 5^STAT/ROUTE_NODE all^Show list of all Route::Node objects
+
+=== 5^STAT/ROUTE_USER <callsign>^Show the data in a Route::User object
+=== 5^STAT/ROUTE_USER all^Show list of all Route::User objects
+

 === 5^STAT/USER [<callsign>]^Show the full status of a user
 Shows the full contents of a user record including all the secret flags
 and stuff.
 === 5^STAT/USER [<callsign>]^Show the full status of a user
 Shows the full contents of a user record including all the secret flags
 and stuff.