add more routing code together with associated commands

[spider.git] / cmd / Commands_en.hlp

diff --git a/cmd/Commands_en.hlp b/cmd/Commands_en.hlp
index 74a601e20525c9dfea615a68cc414133f38359c8..eaef20c9bb99fcd6ed413676efe3e1d1e65324b7 100644 (file)
--- a/cmd/Commands_en.hlp
+++ b/cmd/Commands_en.hlp
@@ -15,7 +15,7 @@
 Create an 'accept this announce' line for a filter. 
 
 An accept filter line means that if the announce matches this filter it is
 Create an 'accept this announce' line for a filter. 
 
 An accept filter line means that if the announce matches this filter it is

-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this

 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-


@@ -59,7 +59,7 @@ default for nodes and users eg:-
 Create an 'accept this spot' line for a filter. 
 
 An accept filter line means that if the spot matches this filter it is
 Create an 'accept this spot' line for a filter. 
 
 An accept filter line means that if the spot matches this filter it is

-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this

 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-


@@ -341,6 +341,7 @@ in debug mode i.e.
        perl -d cluster.pl
 
 It will interrupt the cluster just after the debug command has finished.
        perl -d cluster.pl
 
 It will interrupt the cluster just after the debug command has finished.

+

 === 0^DIRECTORY^List messages 
 === 0^DIRECTORY ALL^List all messages
 === 0^DIRECTORY OWN^List your own messages
 === 0^DIRECTORY^List messages 
 === 0^DIRECTORY ALL^List all messages
 === 0^DIRECTORY OWN^List your own messages


@@ -738,7 +739,7 @@ As a sysop you may read any message on the system
 Create an 'reject this announce' line for a filter. 
 
 A reject filter line means that if the announce matches this filter it is
 Create an 'reject this announce' line for a filter. 
 
 A reject filter line means that if the announce matches this filter it is

-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this

 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-


@@ -778,7 +779,7 @@ default for nodes and users eg:-
 Create a 'reject this spot' line for a filter. 
 
 A reject filter line means that if the spot matches this filter it is
 Create a 'reject this spot' line for a filter. 
 
 A reject filter line means that if the spot matches this filter it is

-dumped (not passed on). See HELP FILTERS for more info. Please read this
+dumped (not passed on). See HELP FILTERING for more info. Please read this

 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-
 to understand how filters work - it will save a lot of grief later on.
 
 You can use any of the following things in this line:-


@@ -982,10 +983,21 @@ Use with extreme care. This command may well be superceded by FILTERing.
 === 0^SET/BEEP^Add a beep to DX and other messages on your terminal
 === 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
 
 === 0^SET/BEEP^Add a beep to DX and other messages on your terminal
 === 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
 

+=== 5^SET/BBS <call> [<call>..]^Make the callsign a BBS
+

 === 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
 
 === 9^SET/DEBUG <name>^Add a debug level to the debug set
 === 9^UNSET/DEBUG <name>^Remove a debug level from the debug set
 === 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
 
 === 9^SET/DEBUG <name>^Add a debug level to the debug set
 === 9^UNSET/DEBUG <name>^Remove a debug level from the debug set

+You can choose to log several different levels.  The levels are
+
+chan
+state
+msg
+cron
+connect
+
+You can show what levels you are logging with SHOW/DEBUG

 
 === 0^SET/DX^Allow DX messages to come out on your terminal
 === 0^UNSET/DX^Stop DX messages coming out on your terminal
 
 === 0^SET/DX^Allow DX messages to come out on your terminal
 === 0^UNSET/DX^Stop DX messages coming out on your terminal


@@ -1184,6 +1196,21 @@ for more information.
 Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
 for more information.
 
 Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
 for more information.
 

+=== 0^SHOW/CONFIGURATION [<node>]^Show all the nodes and users visible
+This command allows you to see all the users that can be seen
+and the nodes to which they are connected.
+
+This command is normally abbreviated to: sh/c
+
+BE WARNED: the list that is returned can be VERY long
+
+=== 0^SHOW/CONFIGURATION/NODE^Show all the nodes connected locally
+Show all the nodes connected to this node.
+
+=== 1^SHOW/CONNECT^Show all the active connections
+This command shows information on all the active connections known to
+the node. This command gives slightly more information than WHO.
+

 === 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time 
 This is very nearly the same as SHOW/TIME, the only difference the format
 of the date string if no arguments are given.
 === 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time 
 This is very nearly the same as SHOW/TIME, the only difference the format
 of the date string if no arguments are given.


@@ -1193,6 +1220,8 @@ time and UTC as the computer has it right now. If you give some prefixes
 then it will show UTC and UTC + the local offset (not including DST) at
 the prefixes or callsigns that you specify.
 
 then it will show UTC and UTC + the local offset (not including DST) at
 the prefixes or callsigns that you specify.
 

+=== 9^SHOW/DEBUG^Show what levels of debug information you are logging
+

 === 0^SHOW/DX^Interrogate the spot database
 If you just type SHOW/DX you will get the last so many spots
 (sysop configurable, but usually 10).
 === 0^SHOW/DX^Interrogate the spot database
 If you just type SHOW/DX you will get the last so many spots
 (sysop configurable, but usually 10).


@@ -1277,6 +1306,11 @@ all the categories will be listed.
 
 === 9^SHOW/LOCKOUT^Show the list of locked out or excluded callsigns
 
 
 === 9^SHOW/LOCKOUT^Show the list of locked out or excluded callsigns
 

+=== 8^SHOW/LOG [<callsign>]^Show excerpts from the system log
+This command outputs a short section of the system log.  On its own
+it will output a general logfile.  With the optional callsign it will
+show output from the log associated with that callsign.
+

 === 0^SHOW/MOON [<prefix>|<callsign>]^Show Moon rise and set times
 Show the Moon rise and set times for a (list of) prefixes or callsigns, 
 together with the azimuth and elevation of the sun currently at those
 === 0^SHOW/MOON [<prefix>|<callsign>]^Show Moon rise and set times
 Show the Moon rise and set times for a (list of) prefixes or callsigns, 
 together with the azimuth and elevation of the sun currently at those


@@ -1488,10 +1522,18 @@ you are on or else for the callsign that you asked for.
 
 Only the fields that are defined (in perl term) will be displayed.
 
 
 Only the fields that are defined (in perl term) will be displayed.
 

-=== 5^STAT/MSG <msgno>^Show the status of a message
+=== 1^STAT/MSG^Show the status of the message system
+=== 1^STAT/MSG <msgno>^Show the status of a message

 This command shows the internal status of a message and includes information
 such as to whom it has been forwarded, its size, origin etc etc.
 
 This command shows the internal status of a message and includes information
 such as to whom it has been forwarded, its size, origin etc etc.
 

+If no message number is given then the status of the message system is 
+displayed.
+
+=== 5^STAT/ROUTE_NODE <callsign>^Show the data in a Route::Node object
+
+=== 5^STAT/ROUTE_USER <callsign>^Show the data in a Route::User object
+

 === 5^STAT/USER [<callsign>]^Show the full status of a user
 Shows the full contents of a user record including all the secret flags
 and stuff.
 === 5^STAT/USER [<callsign>]^Show the full status of a user
 Shows the full contents of a user record including all the secret flags
 and stuff.