projects
/
spider.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
remove debugging from show prefix
[spider.git]
/
cmd
/
Commands_en.hlp
diff --git
a/cmd/Commands_en.hlp
b/cmd/Commands_en.hlp
index 41d6313b625d5ee1f3d9d4f91040cf4d5869155c..7dbb0431fe67d8998e432ebc961deee69fe98cc4 100644
(file)
--- a/
cmd/Commands_en.hlp
+++ b/
cmd/Commands_en.hlp
@@
-11,6
+11,12
@@
#
# Comment lines are indented before printing
#
#
# Comment lines are indented before printing
#
+=== 0^ACCEPT^Set a filter to accept something
+Create a filter to accept something
+
+There are 2 types of filter, accept and reject. See HELP FILTERING for more
+info.
+
=== 0^ACCEPT/ANNOUNCE [0-9] <pattern>^Set an 'accept' filter line for announce
Create an 'accept this announce' line for a filter.
=== 0^ACCEPT/ANNOUNCE [0-9] <pattern>^Set an 'accept' filter line for announce
Create an 'accept this announce' line for a filter.
@@
-914,6
+920,12
@@
message either sent by or sent to your callsign.
=== 5^READ-^
As a sysop you may read any message on the system
=== 5^READ-^
As a sysop you may read any message on the system
+=== 0^REJECT^Set a filter to reject something
+Create a filter to reject something
+
+There are 2 types of filter, accept and reject. See HELP FILTERING for more
+info.
+
=== 0^REJECT/ANNOUNCE [0-9] <pattern>^Set a 'reject' filter line for announce
Create an 'reject this announce' line for a filter.
=== 0^REJECT/ANNOUNCE [0-9] <pattern>^Set a 'reject' filter line for announce
Create an 'reject this announce' line for a filter.
@@
-1753,7
+1765,7
@@
This command outputs a short section of the system log. On its own
it will output a general logfile. With the optional callsign it will
show output from the log associated with that callsign.
it will output a general logfile. With the optional callsign it will
show output from the log associated with that callsign.
-=== 0^SHOW/MOON [<prefix>|<callsign>]^Show Moon rise and set times
+=== 0^SHOW/MOON [
ndays] [
<prefix>|<callsign>]^Show Moon rise and set times
Show the Moon rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
locations.
Show the Moon rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
locations.
@@
-1762,8
+1774,7
@@
If you don't specify any prefixes or callsigns, it will show the times for
your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
together with the current azimuth and elevation.
your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
together with the current azimuth and elevation.
-In addition, it will show the gain or loss dB relative to the nominal
-distance of 385,000Km due to the ellipsoidal nature of the orbit.
+In addition, it will show the illuminated fraction of the moons disk.
If all else fails it will show the Moonrise and set times for the node
that you are connected to.
If all else fails it will show the Moonrise and set times for the node
that you are connected to.
@@
-1782,6
+1793,11
@@
or in three days time:-
SH/MOON +3 W9
SH/MOON +3 W9
+Upto 366 days can be checked both in the past and in the future.
+
+Please note that the rise and set times are given as the UT times of rise and
+set on the requested UT day.
+
=== 0^SHOW/MUF <prefix> [<hours>][long]^Show the likely propagation to a prefix
This command allow you to estimate the likelihood of you contacting
a station with the prefix you have specified. The output assumes a modest
=== 0^SHOW/MUF <prefix> [<hours>][long]^Show the likely propagation to a prefix
This command allow you to estimate the likelihood of you contacting
a station with the prefix you have specified. The output assumes a modest
@@
-1943,7
+1959,7
@@
that callsign is connected to the cluster.
If no callsign is given then show the information for yourself.
If no callsign is given then show the information for yourself.
-=== 0^SHOW/SUN [
+/- days]
[<prefix>|<callsign>]^Show sun rise and set times
+=== 0^SHOW/SUN [
ndays]
[<prefix>|<callsign>]^Show sun rise and set times
Show the sun rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
locations.
Show the sun rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
locations.
@@
-1969,6
+1985,11
@@
or in three days time:-
SH/SUN +3 W9
SH/SUN +3 W9
+Upto 366 days can be checked both in the past and in the future.
+
+Please note that the rise and set times are given as the UT times of rise
+and set on the requested UT day.
+
=== 0^SHOW/TIME [<prefix>|<callsign>]^Show the local time
If no prefixes or callsigns are given then this command returns the local
time and UTC as the computer has it right now. If you give some prefixes
=== 0^SHOW/TIME [<prefix>|<callsign>]^Show the local time
If no prefixes or callsigns are given then this command returns the local
time and UTC as the computer has it right now. If you give some prefixes